[PATCH v6 0/2] Adding device tree and binding for NVIDIA GB200-UT3.0b

[PATCH v6 0/2] Adding device tree and binding for NVIDIA GB200-UT3.0b

[Donald Shannon]

Patch 1 adds the binding for the NVIDIA GB200-UT3.0b platform.
Patch 2 adds the device tree for the NVIDIA GB200-UT3.0b platform.

This is an Aspeed AST2600 based unit testing platform for GB200.
UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
differences, additional gpio expanders, and voltage regulator gating
some devices.

Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

Link: https://www.aspeedtech.com/server_ast2600/ [1]
Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
Signed-off-by: Donald Shannon <donalds@nvidia.com>
---
Changes v1 -> v2:
  - Changed phy-mode to rgmii-id [Lunn]
  - Removed redundant max-speed for mac0 [Lunn]
  - Fixed typo from gb200nvl to gb200 in Makefile
Changes v2 -> v3:
 - Fixed whitespace issues [Krzysztof]
 - Fixed schema validation issues from my end ( there are still issues
 with the aspeed dtsi file that are not related to this new dts)
 [Herring]
 - Reordered to follow style guide [Krzysztof]
 - Removed redundant status okays
 - Changed vcc to vdd for the power gating on the gpio expanders
Changes v3 -> v4:
  - Added changelog [Krzysztof]
  - Added nvidia,gb200-ut30b board binding [Krzysztof]
  - Removed unused imports
  - Reordered a couple other style guide violations
  - Added back in a couple needed "status okay"s
Changes v4 -> v5:
 - Resumed my patch after a pause
 - Don't plan to make this include of nvidia-gb200nvl-bmc due to some
 platform differences
 - Fixed io expanders that weren't gated by the 3.3V standby regulator
 - Fixed incorrect interrupt pin for one IO expander
 - Removed some IO expanders and I2C busses
Changes v5 -> v6:
 - Fixed subject line
 - Added missing gpio-key compatible type to buttons
---

Donald Shannon (2):
  dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b  board
  ARM: dts: aspeed: Add NVIDIA GB200 UT3.0b board

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts  | 1028 +++++++++++++++++
 3 files changed, 1030 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts


base-commit: 05adbee3ad528100ab0285c15c91100e19e10138
-- 
2.43.0

[PATCH v6 1/2] dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b board

[Donald Shannon]

This is an Aspeed AST2600 based unit testing platform for GB200.
UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
differences, additional gpio expanders, and voltage regulator gating
some devices.

Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

Link: https://www.aspeedtech.com/server_ast2600/ [1]
Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
Signed-off-by: Donald Shannon <donalds@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 456dbf7b5ec8..624581db2330 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -99,6 +99,7 @@ properties:
               - inventec,starscream-bmc
               - inventec,transformer-bmc
               - jabil,rbp-bmc
+              - nvidia,gb200-ut30b
               - nvidia,gb200nvl-bmc
               - qcom,dc-scm-v1-bmc
               - quanta,s6q-bmc
-- 
2.43.0

[PATCH v6 2/2] ARM: dts: aspeed: Add NVIDIA GB200 UT3.0b board

[Donald Shannon]

This is an Aspeed AST2600 based unit testing platform for GB200.
UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
differences, additional gpio expanders, and voltage regulator gating
some devices.

Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

Link: https://www.aspeedtech.com/server_ast2600/ [1]
Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
Signed-off-by: Donald Shannon <donalds@nvidia.com>
---
Changes v1 -> v2:
  - Changed phy-mode to rgmii-id [Lunn]
  - Removed redundant max-speed for mac0 [Lunn]
  - Fixed typo from gb200nvl to gb200 in Makefile
Changes v2 -> v3:
 - Fixed whitespace issues [Krzysztof]
 - Fixed schema validation issues from my end ( there are still issues
 with the aspeed dtsi file that are not related to this new dts)
 [Herring]
 - Reordered to follow style guide [Krzysztof]
 - Removed redundant status okays
 - Changed vcc to vdd for the power gating on the gpio expanders
Changes v3 -> v4:
  - Added changelog [Krzysztof]
  - Added nvidia,gb200-ut30b board binding [Krzysztof]
  - Removed unused imports
  - Reordered a couple other style guide violations
  - Added back in a couple needed "status okay"s
Changes v4 -> v5:
 - Resumed my patch after a pause
 - Don't plan to make this include of nvidia-gb200nvl-bmc due to some
 platform differences
 - Fixed io expanders that weren't gated by the 3.3V standby regulator
 - Fixed incorrect interrupt pin for one IO expander
 - Removed some IO expanders and I2C busses
Changes v5 -> v6:
 - Fixed subject line
 - Added missing gpio-key compatible type to buttons
---
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts  | 1028 +++++++++++++++++
 2 files changed, 1029 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index aba7451ab749..37edc4625a9f 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200-ut30b.dtb \
 	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
new file mode 100644
index 000000000000..e0714ad796df
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
@@ -0,0 +1,1028 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2600 GB200 UT3.0b BMC";
+	compatible = "nvidia,gb200-ut30b", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reg_3v3_stby: regulator-3v3-standby {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3-standby";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+		};
+
+		video_engine_memory: jpegbuffer {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+		};
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		status = "okay";
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+	// Data SPI is 64MB in size
+	flash@0 {
+		label = "config";
+		spi-max-frequency = <50000000>;
+		status = "okay";
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+	status = "okay";
+};
+
+// USB Port B Controller
+&ehci1 {
+	status = "okay";
+};
+
+// USB Port B Controller
+&uhci {
+	status = "okay";
+};
+
+// USB port A vhub
+&vhub {
+	status = "okay";
+};
+
+&rng {
+	status = "okay";
+};
+
+&video {
+	memory-region = <&video_engine_memory>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	status = "okay";
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+// Enabling SOL
+&uart3 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing { };
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+&i2c2 {
+	clock-frequency = <400000>;
+	multi-master;
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3_stby>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	clock-frequency = <400000>;
+	multi-master;
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&reg_3v3_stby>;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&reg_3v3_stby>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		imux24: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux25: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&reg_3v3_stby>;
+
+				i2c25mux0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c25mux2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c25mux3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&reg_3v3_stby>;
+
+				i2c29mux0: i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c29mux2: i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				i2c29mux3: i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux31: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		imux32: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux34: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux35: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		imux36: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux37: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux38: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		imux39: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	clock-frequency = <400000>;
+	multi-master;
+	status = "okay";
+};
+
+// I2C10
+// Module 0/1 IO Expanders
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3_stby>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// UT3.0b Expander @0x22
+	exp2: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3_stby>;
+		gpio-line-names =
+			"BMC1_FANCTRL_FAIL_L-I",
+			"IOEXP_BMC_RST_12V-O",
+			"NODE_RST_STBY_H-O",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// UT3.0b Expander @0x23
+	exp3: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3_stby>;
+		gpio-line-names =
+			"PEXSW_FL_SPI_MUX_SEL-O",
+			"PEX_SW_FATAL_ERROR_3V3_L-I",
+			"IOEXP_PDB_NODE_EN_L-O",
+			"NODE_PWOK_ISO-I",
+			"BMC_FAN_PWR_EN-O",
+			"BMC_ETHERNET_INT-I",
+			"BMC_ENET_RST-O",
+			"IOEXP_BMC_RST_SENSE-O",
+			"BMC_ID-I",
+			"TPM_MUX_3V3_SEL_N-O",
+			"IOEXP_TPM_RST_N-O",
+			"TPM_DOWN_SPI_INT_L-I",
+			"PS_BRD_PGOOD-I",
+			"FP_BUTTON_POWER_N-I",
+			"FP_BUTTON_RESET_N-I",
+			"FP_LED_POWER_GPIOEXP_N-O";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	clock-frequency = <100000>;
+	multi-master;
+	status = "okay";
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&reg_3v3_stby>;
+
+		e1si2c0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		e1si2c2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		e1si2c3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
-- 
2.43.0

Re: [PATCH v6 0/2] Adding device tree and binding for NVIDIA GB200-UT3.0b

[Rob Herring (Arm)]

On Tue, 22 Jul 2025 18:42:37 -0700, Donald Shannon wrote:
> Patch 1 adds the binding for the NVIDIA GB200-UT3.0b platform.
> Patch 2 adds the device tree for the NVIDIA GB200-UT3.0b platform.
> 
> This is an Aspeed AST2600 based unit testing platform for GB200.
> UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
> differences, additional gpio expanders, and voltage regulator gating
> some devices.
> 
> Reference to Ast2600 SOC [1].
> Reference to Blackwell GB200NVL Platform [2].
> 
> Link: https://www.aspeedtech.com/server_ast2600/ [1]
> Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
> Signed-off-by: Donald Shannon <donalds@nvidia.com>
> ---
> Changes v1 -> v2:
>   - Changed phy-mode to rgmii-id [Lunn]
>   - Removed redundant max-speed for mac0 [Lunn]
>   - Fixed typo from gb200nvl to gb200 in Makefile
> Changes v2 -> v3:
>  - Fixed whitespace issues [Krzysztof]
>  - Fixed schema validation issues from my end ( there are still issues
>  with the aspeed dtsi file that are not related to this new dts)
>  [Herring]
>  - Reordered to follow style guide [Krzysztof]
>  - Removed redundant status okays
>  - Changed vcc to vdd for the power gating on the gpio expanders
> Changes v3 -> v4:
>   - Added changelog [Krzysztof]
>   - Added nvidia,gb200-ut30b board binding [Krzysztof]
>   - Removed unused imports
>   - Reordered a couple other style guide violations
>   - Added back in a couple needed "status okay"s
> Changes v4 -> v5:
>  - Resumed my patch after a pause
>  - Don't plan to make this include of nvidia-gb200nvl-bmc due to some
>  platform differences
>  - Fixed io expanders that weren't gated by the 3.3V standby regulator
>  - Fixed incorrect interrupt pin for one IO expander
>  - Removed some IO expanders and I2C busses
> Changes v5 -> v6:
>  - Fixed subject line
>  - Added missing gpio-key compatible type to buttons
> ---
> 
> Donald Shannon (2):
>   dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b  board
>   ARM: dts: aspeed: Add NVIDIA GB200 UT3.0b board
> 
>  .../bindings/arm/aspeed/aspeed.yaml           |    1 +
>  arch/arm/boot/dts/aspeed/Makefile             |    1 +
>  .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts  | 1028 +++++++++++++++++
>  3 files changed, 1030 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
> 
> 
> base-commit: 05adbee3ad528100ab0285c15c91100e19e10138
> --
> 2.43.0
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit 05adbee3ad528100ab0285c15c91100e19e10138

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250723014239.22667-1-donalds@nvidia.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dtb: /ahb/apb/fsi@1e79b000/cfam@0,0/hub@3400/cfam@5,0/hub@3400: failed to match any schema with compatible: ['fsi-master-hub']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dtb: /gpio-fsi/cfam@0,0/i2c@1800: failed to match any schema with compatible: ['ibm,fsi-i2c-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-power: 'anyOf' conditional failed, one must be fixed:
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-power: 'oneOf' conditional failed, one must be fixed:
		'interrupts' is a required property
		'interrupts-extended' is a required property
	'gpios' is a required property
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-power: 'linux,code' is a required property
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-power: Unevaluated properties are not allowed ('gpio' was unexpected)
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-uid: 'anyOf' conditional failed, one must be fixed:
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-uid: 'oneOf' conditional failed, one must be fixed:
		'interrupts' is a required property
		'interrupts-extended' is a required property
	'gpios' is a required property
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-uid: 'linux,code' is a required property
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: buttons (gpio-keys): button-uid: Unevaluated properties are not allowed ('gpio' was unexpected)
	from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b board

[Krzysztof Kozlowski]

On 23/07/2025 03:42, Donald Shannon wrote:
> This is an Aspeed AST2600 based unit testing platform for GB200.
> UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
> differences, additional gpio expanders, and voltage regulator gating
> some devices.
> 
> Reference to Ast2600 SOC [1].
> Reference to Blackwell GB200NVL Platform [2].
> 
> Link: https://www.aspeedtech.com/server_ast2600/ [1]
> Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
> Signed-off-by: Donald Shannon <donalds@nvidia.com>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>

Why are you faking tags? No, you cannot just add whatever you want.

Best regards,
Krzysztof

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b board

[Donald Shannon]

On 7/22/25 22:56, Krzysztof Kozlowski wrote:
> External email: Use caution opening links or attachments
>
>
> On 23/07/2025 03:42, Donald Shannon wrote:
>> This is an Aspeed AST2600 based unit testing platform for GB200.
>> UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
>> differences, additional gpio expanders, and voltage regulator gating
>> some devices.
>>
>> Reference to Ast2600 SOC [1].
>> Reference to Blackwell GB200NVL Platform [2].
>>
>> Link: https://www.aspeedtech.com/server_ast2600/ [1]
>> Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
>> Signed-off-by: Donald Shannon <donalds@nvidia.com>
>> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> Why are you faking tags? No, you cannot just add whatever you want.
>
> Best regards,
> Krzysztof

Hi Krzysztof,

I think I was confused by your message on my V5 patch. I will remove the Acked-by and resubmit:

>A nit, subject: drop second/last, redundant "binding". The
>"dt-bindings" prefix is already stating that these are bindings.
>See also:
>https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
>
>With above two:
>
>Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
>
><form letter>
>This is an automated instruction, just in case, because many review
>tags are being ignored. If you know the process, just skip it entirely
>(please do not feel offended by me posting it here - no bad intentions
>intended, no patronizing, I just want to avoid wasted efforts). If you
>do not know the process, here is a short explanation:
>
>Please add Acked-by/Reviewed-by/Tested-by tags when posting new
>versions of patchset, under or above your Signed-off-by tag, unless
>patch changed significantly (e.g. new properties added to the DT
>bindings). Tag is "received", when provided in a message replied to you
>on the mailing list. Tools like b4 can help here ('b4 trailers -u ...').
>However, there's no need to repost patches *only* to add the tags. The
>upstream maintainer will do that for tags received on the version they
>apply.

Thanks,
Donald

Re: [PATCH v6 1/2] dt-bindings: arm: aspeed: Add NVIDIA GB200-UT3.0b board

[Krzysztof Kozlowski]

On 23/07/2025 23:58, Donald Shannon wrote:
> On 7/22/25 22:56, Krzysztof Kozlowski wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 23/07/2025 03:42, Donald Shannon wrote:
>>> This is an Aspeed AST2600 based unit testing platform for GB200.
>>> UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
>>> differences, additional gpio expanders, and voltage regulator gating
>>> some devices.
>>>
>>> Reference to Ast2600 SOC [1].
>>> Reference to Blackwell GB200NVL Platform [2].
>>>
>>> Link: https://www.aspeedtech.com/server_ast2600/ [1]
>>> Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
>>> Signed-off-by: Donald Shannon <donalds@nvidia.com>
>>> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Why are you faking tags? No, you cannot just add whatever you want.
>>
>> Best regards,
>> Krzysztof
> 
> Hi Krzysztof,
> 
> I think I was confused by your message on my V5 patch. I will remove the Acked-by and resubmit:
> 
>> A nit, subject: drop second/last, redundant "binding". The
>> "dt-bindings" prefix is already stating that these are bindings.
>> See also:
>> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
>>
>> With above two:
>>
>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


And what did you paste in your patch?

And why?


Best regards,
Krzysztof