public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Tom Zanussi <tom.zanussi@linux.intel.com>
To: Dave Jiang <dave.jiang@intel.com>,
	herbert@gondor.apana.org.au, davem@davemloft.net,
	fenghua.yu@intel.com, vkoul@kernel.org
Cc: tony.luck@intel.com, wajdi.k.feghali@intel.com,
	james.guilford@intel.com, kanchana.p.sridhar@intel.com,
	vinodh.gopal@intel.com, giovanni.cabiddu@intel.com, pavel@ucw.cz,
	linux-kernel@vger.kernel.org, linux-crypto@vger.kernel.org,
	dmaengine@vger.kernel.org
Subject: Re: [PATCH v10 14/14] dmaengine: idxd: Add support for device/wq defaults
Date: Mon, 27 Nov 2023 16:42:13 -0600	[thread overview]
Message-ID: <24ea5fa0d43bcd67f98f9c236e64bddbaec06b07.camel@linux.intel.com> (raw)
In-Reply-To: <6d68774a-1f2d-4a9a-b96c-0e9c93655021@intel.com>

On Mon, 2023-11-27 at 15:14 -0700, Dave Jiang wrote:
> 
> 
> On 11/27/23 13:27, Tom Zanussi wrote:
> > Add a load_device_defaults() function pointer to struct
> > idxd_driver_data, which if defined, will be called when an idxd
> > device
> > is probed and will allow the idxd device to be configured with
> > default
> > values.
> > 
> > The load_device_defaults() function is passed an idxd device to
> > work
> > with to set specific device attributes.
> > 
> > Also add a load_device_defaults() implementation IAA devices;
> > future
> > patches would add default functions for other device types such as
> > DSA.
> > 
> > The way idxd device probing works, if the device configuration is
> > valid at that point e.g. at least one workqueue and engine is
> > properly
> > configured then the device will be enabled and ready to go.
> > 
> > The IAA implementation, idxd_load_iaa_device_defaults(), configures
> > a
> > single workqueue (wq0) for each device with the following default
> > values:
> > 
> >       mode              "dedicated"
> >       threshold         0
> >       size              16
> >       priority          10
> >       type              IDXD_WQT_KERNEL
> >       group             0
> >       name              "iaa_crypto"
> >       driver_name       "crypto"
> > 
> > Note that this now adds another configuration step for any users
> > that
> > want to configure their own devices/workqueus with something
> > different
> > in that they'll first need to disable (in the case of IAA) wq0 and
> > the
> > device itself before they can set their own attributes and re-
> > enable,
> > since they've been already been auto-enabled.  Note also that in
> > order
> > for the new configuration to be applied to the deflate-iaa crypto
> > algorithm the iaa_crypto module needs to unregister the old
> > version,
> > which is accomplished by removing the iaa_crypto module, and
> > re-registering it with the new configuration by reinserting the
> > iaa_crypto module.
> > 
> > Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
> 
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>

Thanks, Dave!

Tom

> 
> > ---
> >  drivers/dma/idxd/Makefile   |  2 +-
> >  drivers/dma/idxd/defaults.c | 53
> > +++++++++++++++++++++++++++++++++++++
> >  drivers/dma/idxd/idxd.h     |  4 +++
> >  drivers/dma/idxd/init.c     |  7 +++++
> >  4 files changed, 65 insertions(+), 1 deletion(-)
> >  create mode 100644 drivers/dma/idxd/defaults.c
> > 
> > diff --git a/drivers/dma/idxd/Makefile b/drivers/dma/idxd/Makefile
> > index c5e679070e46..2b4a0d406e1e 100644
> > --- a/drivers/dma/idxd/Makefile
> > +++ b/drivers/dma/idxd/Makefile
> > @@ -4,7 +4,7 @@ obj-$(CONFIG_INTEL_IDXD_BUS) += idxd_bus.o
> >  idxd_bus-y := bus.o
> >  
> >  obj-$(CONFIG_INTEL_IDXD) += idxd.o
> > -idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o
> > debugfs.o
> > +idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o
> > debugfs.o defaults.o
> >  
> >  idxd-$(CONFIG_INTEL_IDXD_PERFMON) += perfmon.o
> >  
> > diff --git a/drivers/dma/idxd/defaults.c
> > b/drivers/dma/idxd/defaults.c
> > new file mode 100644
> > index 000000000000..a0c9faad8efe
> > --- /dev/null
> > +++ b/drivers/dma/idxd/defaults.c
> > @@ -0,0 +1,53 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/* Copyright(c) 2023 Intel Corporation. All rights rsvd. */
> > +#include <linux/kernel.h>
> > +#include "idxd.h"
> > +
> > +int idxd_load_iaa_device_defaults(struct idxd_device *idxd)
> > +{
> > +       struct idxd_engine *engine;
> > +       struct idxd_group *group;
> > +       struct idxd_wq *wq;
> > +
> > +       if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
> > +               return 0;
> > +
> > +       wq = idxd->wqs[0];
> > +
> > +       if (wq->state != IDXD_WQ_DISABLED)
> > +               return -EPERM;
> > +
> > +       /* set mode to "dedicated" */
> > +       set_bit(WQ_FLAG_DEDICATED, &wq->flags);
> > +       wq->threshold = 0;
> > +
> > +       /* set size to 16 */
> > +       wq->size = 16;
> > +
> > +       /* set priority to 10 */
> > +       wq->priority = 10;
> > +
> > +       /* set type to "kernel" */
> > +       wq->type = IDXD_WQT_KERNEL;
> > +
> > +       /* set wq group to 0 */
> > +       group = idxd->groups[0];
> > +       wq->group = group;
> > +       group->num_wqs++;
> > +
> > +       /* set name to "iaa_crypto" */
> > +       memset(wq->name, 0, WQ_NAME_SIZE + 1);
> > +       strscpy(wq->name, "iaa_crypto", WQ_NAME_SIZE + 1);
> > +
> > +       /* set driver_name to "crypto" */
> > +       memset(wq->driver_name, 0, DRIVER_NAME_SIZE + 1);
> > +       strscpy(wq->driver_name, "crypto", DRIVER_NAME_SIZE + 1);
> > +
> > +       engine = idxd->engines[0];
> > +
> > +       /* set engine group to 0 */
> > +       engine->group = idxd->groups[0];
> > +       engine->group->num_engines++;
> > +
> > +       return 0;
> > +}
> > diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
> > index 62ea21b25906..47de3f93ff1e 100644
> > --- a/drivers/dma/idxd/idxd.h
> > +++ b/drivers/dma/idxd/idxd.h
> > @@ -277,6 +277,8 @@ struct idxd_dma_dev {
> >         struct dma_device dma;
> >  };
> >  
> > +typedef int (*load_device_defaults_fn_t) (struct idxd_device
> > *idxd);
> > +
> >  struct idxd_driver_data {
> >         const char *name_prefix;
> >         enum idxd_type type;
> > @@ -286,6 +288,7 @@ struct idxd_driver_data {
> >         int evl_cr_off;
> >         int cr_status_off;
> >         int cr_result_off;
> > +       load_device_defaults_fn_t load_device_defaults;
> >  };
> >  
> >  struct idxd_evl {
> > @@ -730,6 +733,7 @@ void idxd_unregister_devices(struct idxd_device
> > *idxd);
> >  void idxd_wqs_quiesce(struct idxd_device *idxd);
> >  bool idxd_queue_int_handle_resubmit(struct idxd_desc *desc);
> >  void multi_u64_to_bmap(unsigned long *bmap, u64 *val, int count);
> > +int idxd_load_iaa_device_defaults(struct idxd_device *idxd);
> >  
> >  /* device interrupt control */
> >  irqreturn_t idxd_misc_thread(int vec, void *data);
> > diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
> > index 0eb1c827a215..14df1f1347a8 100644
> > --- a/drivers/dma/idxd/init.c
> > +++ b/drivers/dma/idxd/init.c
> > @@ -59,6 +59,7 @@ static struct idxd_driver_data idxd_driver_data[]
> > = {
> >                 .evl_cr_off = offsetof(struct iax_evl_entry, cr),
> >                 .cr_status_off = offsetof(struct
> > iax_completion_record, status),
> >                 .cr_result_off = offsetof(struct
> > iax_completion_record, error_code),
> > +               .load_device_defaults =
> > idxd_load_iaa_device_defaults,
> >         },
> >  };
> >  
> > @@ -745,6 +746,12 @@ static int idxd_pci_probe(struct pci_dev
> > *pdev, const struct pci_device_id *id)
> >                 goto err;
> >         }
> >  
> > +       if (data->load_device_defaults) {
> > +               rc = data->load_device_defaults(idxd);
> > +               if (rc)
> > +                       dev_warn(dev, "IDXD loading device defaults
> > failed\n");
> > +       }
> > +
> >         rc = idxd_register_devices(idxd);
> >         if (rc) {
> >                 dev_err(dev, "IDXD sysfs setup failed\n");


  reply	other threads:[~2023-11-27 22:42 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-27 20:26 [PATCH v10 00/14] crypto: Add Intel Analytics Accelerator (IAA) crypto compression driver Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 01/14] dmaengine: idxd: add external module driver support for dsa_bus_type Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 02/14] dmaengine: idxd: Rename drv_enable/disable_wq to idxd_drv_enable/disable_wq, and export Tom Zanussi
2023-11-29 13:23   ` Vinod Koul
2023-11-27 20:26 ` [PATCH v10 03/14] dmaengine: idxd: Export descriptor management functions Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 04/14] dmaengine: idxd: Export wq resource " Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 05/14] dmaengine: idxd: Add wq private data accessors Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 06/14] dmaengine: idxd: add callback support for iaa crypto Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 07/14] crypto: iaa - Add IAA Compression Accelerator Documentation Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 08/14] crypto: iaa - Add Intel IAA Compression Accelerator crypto driver core Tom Zanussi
2023-11-27 20:26 ` [PATCH v10 09/14] crypto: iaa - Add per-cpu workqueue table with rebalancing Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 10/14] crypto: iaa - Add compression mode management along with fixed mode Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 11/14] crypto: iaa - Add support for deflate-iaa compression algorithm Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 12/14] crypto: iaa - Add irq support for the crypto async interface Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 13/14] crypto: iaa - Add IAA Compression Accelerator stats Tom Zanussi
2023-11-27 20:27 ` [PATCH v10 14/14] dmaengine: idxd: Add support for device/wq defaults Tom Zanussi
2023-11-27 22:14   ` Dave Jiang
2023-11-27 22:42     ` Tom Zanussi [this message]
2023-11-28 20:31   ` Fenghua Yu
2023-11-28 21:09     ` Tom Zanussi
2023-11-30  0:31       ` Yu, Fenghua
2023-11-30 15:18         ` Tom Zanussi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=24ea5fa0d43bcd67f98f9c236e64bddbaec06b07.camel@linux.intel.com \
    --to=tom.zanussi@linux.intel.com \
    --cc=dave.jiang@intel.com \
    --cc=davem@davemloft.net \
    --cc=dmaengine@vger.kernel.org \
    --cc=fenghua.yu@intel.com \
    --cc=giovanni.cabiddu@intel.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=james.guilford@intel.com \
    --cc=kanchana.p.sridhar@intel.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pavel@ucw.cz \
    --cc=tony.luck@intel.com \
    --cc=vinodh.gopal@intel.com \
    --cc=vkoul@kernel.org \
    --cc=wajdi.k.feghali@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox