Re: [PATCH v7 3/3] dt-bindings: input: Update dtbinding for adp5588

[Krzysztof Kozlowski <krzk@kernel.org>]

On 04/07/2024 15:03, Utsav Agarwal via B4 Relay wrote:
> From: Utsav Agarwal <utsav.agarwal@analog.com>

Subject: everything is an update, be more specific.

> 
> Updating dt bindings for adp5588. Since the device can now function in a
> purely gpio mode, the following keypad specific properties are now made
> optional:
> 	- interrupts
> 	- keypad,num-rows
> 	- keypad,num-columns
> 	- linux,keymap
> 
> However the above properties are required to be specified when
> configuring the device as a keypad, dependencies have been added
> such that specifying either one would require the remaining as well.
> 
> Note that interrupts are optional, but required when the device has been
> configured in keypad mode.
> 
> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
> ---
>  .../devicetree/bindings/input/adi,adp5588.yaml     | 46 +++++++++++++++++++---
>  1 file changed, 41 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> index 26ea66834ae2..481c37595ebb 100644
> --- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> +++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> @@ -49,7 +49,10 @@ properties:
>    interrupt-controller:
>      description:
>        This property applies if either keypad,num-rows lower than 8 or
> -      keypad,num-columns lower than 10.
> +      keypad,num-columns lower than 10. This property is optional if
> +      keypad,num-rows or keypad,num-columns are not specified since the
> +      device then acts as gpio only, during which interrupts may or may
> +      not be utilized.
>  
>    '#interrupt-cells':
>      const: 2
> @@ -65,13 +68,28 @@ properties:
>      minItems: 1
>      maxItems: 2
>  
> +
> +dependencies:
> +  keypad,num-rows:
> +    - linux,keymap
> +    - keypad,num-columns
> +  keypad,num-columns:
> +    - linux,keymap
> +    - keypad,num-rows
> +  linux,keymap:
> +    - keypad,num-rows
> +    - keypad,num-columns
> +
> +if:
> +  required:
> +    - linux,keymap
> +then:
> +  required:
> +    - interrupts
> +
>  required:
>    - compatible
>    - reg
> -  - interrupts
> -  - keypad,num-rows
> -  - keypad,num-columns
> -  - linux,keymap
>  
>  unevaluatedProperties: false
>  
> @@ -108,4 +126,22 @@ examples:
>              >;
>          };
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/input/input.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        gpio@34 {
> +              compatible = "adi,adp5588";
> +              reg = <0x34>;

Still messed indentation.

Didn't you get already such feedback?


Best regards,
Krzysztof