From: Matthias Brugger <matthias.bgg@gmail.com>
To: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/4] arm64: dts: mt8183: Add katsu board
Date: Thu, 30 Dec 2021 12:16:02 +0100 [thread overview]
Message-ID: <2698260b-43c1-6fbd-b3af-fac01ee48c82@gmail.com> (raw)
In-Reply-To: <20211213162856.235130-1-hsinyi@chromium.org>
On 13/12/2021 17:28, Hsin-Yi Wang wrote:
> Katsu is known as ASUS Chromebook Detachable CZ1.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> This patch depends on [1] to add Himax8279d MIPI-DSI LCD panel driver.
>
> [1] https://patchwork.freedesktop.org/patch/462468/
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 2 +
> .../dts/mediatek/mt8183-kukui-katsu-sku32.dts | 38 +++++++++++++++++
> .../dts/mediatek/mt8183-kukui-katsu-sku38.dts | 42 +++++++++++++++++++
> 3 files changed, 82 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 1613259b686576..c130518c3293d5 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -28,6 +28,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
> new file mode 100644
> index 00000000000000..f923b8c3c49c36
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8183-kukui-kakadu.dtsi"
> +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
> +
> +/ {
> + model = "MediaTek katsu board";
> + compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /delete-node/touchscreen@10;
> + touchscreen1: touchscreen@5d {
> + compatible = "goodix,gt7375p";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&open_touch>;
> +
> + interrupt-parent = <&pio>;
> + interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
> +
> + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&panel {
> + compatible = "starry,2081101qfh032011-53g";
Compatible not present in DT-Bindings.
> +};
> +
> +&qca_wifi {
> + qcom,ath10k-calibration-variant = "GO_KATSU";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
> new file mode 100644
> index 00000000000000..1ab14096a279c6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8183-kukui-kakadu.dtsi"
> +#include "mt8183-kukui-audio-rt1015p.dtsi"
> +
> +/ {
> + model = "MediaTek katsu sku38 board";
> + compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + /delete-node/touchscreen@10;
> + touchscreen1: touchscreen@5d {
> + compatible = "goodix,gt7375p";
> + reg = <0x5d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&open_touch>;
> +
> + interrupt-parent = <&pio>;
> + interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
> +
> + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&panel {
> + compatible = "starry,2081101qfh032011-53g";
Same here.
Regards,
Matthias
> +};
> +
> +&qca_wifi {
> + qcom,ath10k-calibration-variant = "GO_KATSU";
> +};
> +
> +&sound {
> + compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
> +};
>
prev parent reply other threads:[~2021-12-30 11:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-13 16:28 [PATCH v2 1/4] arm64: dts: mt8183: Add katsu board Hsin-Yi Wang
2021-12-13 16:28 ` [PATCH v2 2/4] arm64: dts: mt8183: Add kukui-jacuzzi-makomo board Hsin-Yi Wang
2021-12-13 16:28 ` [PATCH v2 3/4] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-katsu Hsin-Yi Wang
2021-12-15 20:21 ` Rob Herring
2021-12-13 16:28 ` [PATCH v2 4/4] dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-makomo Hsin-Yi Wang
2021-12-15 20:21 ` Rob Herring
2021-12-30 11:16 ` Matthias Brugger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2698260b-43c1-6fbd-b3af-fac01ee48c82@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox