From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
linux-serial <linux-serial@vger.kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
kgugala@antmicro.com, mholenko@antmicro.com, joel@jms.id.au,
david.abdurachmanov@gmail.com, florent@enjoy-digital.fr,
geert@linux-m68k.org
Subject: Re: [PATCH v4 12/14] serial: liteuart: add IRQ support for the RX path
Date: Fri, 18 Nov 2022 16:30:15 +0200 (EET) [thread overview]
Message-ID: <26f43d54-7ee6-d05e-5c1c-4bc37f06077@linux.intel.com> (raw)
In-Reply-To: <Y3eWJNbcGJOMl7K1@errol.ini.cmu.edu>
[-- Attachment #1: Type: text/plain, Size: 3931 bytes --]
On Fri, 18 Nov 2022, Gabriel L. Somlo wrote:
> On Fri, Nov 18, 2022 at 03:58:47PM +0200, Ilpo Järvinen wrote:
> > On Wed, 16 Nov 2022, Gabriel Somlo wrote:
> >
> > > Add support for IRQ-driven RX. Support for the TX path will be added
> > > in a separate commit.
> > >
> > > Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
> > > ---
> > >
> > > Changes from v3:
> > > - add shadow irq register to support polling mode and avoid reading
> > > hardware mmio irq register to learn which irq flags are enabled
> > > - this also simplifies both liteuart_interrupt() and liteuart_startup()
> > >
> > > drivers/tty/serial/liteuart.c | 76 +++++++++++++++++++++++++++++++----
> > > 1 file changed, 69 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
> > > index 8a6e176be08e..fad778578986 100644
> > > --- a/drivers/tty/serial/liteuart.c
> > > +++ b/drivers/tty/serial/liteuart.c
> > > @@ -7,6 +7,7 @@
> > >
> > > #include <linux/bits.h>
> > > #include <linux/console.h>
> > > +#include <linux/interrupt.h>
> > > #include <linux/litex.h>
> > > #include <linux/module.h>
> > > #include <linux/of.h>
> > > @@ -46,6 +47,7 @@ struct liteuart_port {
> > > struct uart_port port;
> > > struct timer_list timer;
> > > u32 id;
> > > + u8 irq_reg;
> > > };
> > >
> > > #define to_liteuart_port(port) container_of(port, struct liteuart_port, port)
> > > @@ -76,6 +78,19 @@ static void liteuart_putchar(struct uart_port *port, unsigned char ch)
> > > litex_write8(port->membase + OFF_RXTX, ch);
> > > }
> > >
> > > +static void liteuart_update_irq_reg(struct uart_port *port, bool set, u8 mask)
> > > +{
> > > + struct liteuart_port *uart = to_liteuart_port(port);
> > > +
> > > + if (set)
> > > + uart->irq_reg |= mask;
> > > + else
> > > + uart->irq_reg &= ~mask;
> > > +
> > > + if (port->irq)
> > > + litex_write8(port->membase + OFF_EV_ENABLE, uart->irq_reg);
> > > +}
> > > +
> > > static void liteuart_stop_tx(struct uart_port *port)
> > > {
> > > }
> > > @@ -129,13 +144,27 @@ static void liteuart_rx_chars(struct uart_port *port)
> > > tty_flip_buffer_push(&port->state->port);
> > > }
> > >
> > > +static irqreturn_t liteuart_interrupt(int irq, void *data)
> > > +{
> > > + struct liteuart_port *uart = data;
> > > + struct uart_port *port = &uart->port;
> > > + u8 isr;
> > > +
> > > + spin_lock(&port->lock);
> > > + isr = litex_read8(port->membase + OFF_EV_PENDING) & uart->irq_reg;
> > > + if (isr & EV_RX)
> > > + liteuart_rx_chars(port);
> > > + spin_unlock(&port->lock);
> > > +
> > > + return IRQ_RETVAL(isr);
> > > +}
> > > +
> > > static void liteuart_timer(struct timer_list *t)
> > > {
> > > struct liteuart_port *uart = from_timer(uart, t, timer);
> > > struct uart_port *port = &uart->port;
> > >
> > > - liteuart_rx_chars(port);
> > > -
> > > + liteuart_interrupt(0, port);
> > > mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
> > > }
> > >
> > > @@ -161,19 +190,45 @@ static unsigned int liteuart_get_mctrl(struct uart_port *port)
> > > static int liteuart_startup(struct uart_port *port)
> > > {
> > > struct liteuart_port *uart = to_liteuart_port(port);
> > > + unsigned long flags;
> > > + int ret;
> > >
> > > - /* disable events */
> > > - litex_write8(port->membase + OFF_EV_ENABLE, 0);
> > > + if (port->irq) {
> > > + ret = request_irq(port->irq, liteuart_interrupt, 0,
> > > + KBUILD_MODNAME, uart);
> > > + if (ret) {
> > > + pr_err(pr_fmt("line %d irq %d failed: using polling\n"),
> > > + port->line, port->irq);
> >
> > dev_err() seems more appropriate here.
>
> Makes sense, good thing `struct uart_port` has a `dev` field :)
> I've made the change, and lined it up for the upcoming v5 of the
> series.
Also that pr_fmt() should be dropped (in case you didn't already). It was
in my mind ealier but should have stated it explicitly.
--
i.
next prev parent reply other threads:[~2022-11-18 14:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-16 14:48 [PATCH v4 00/14] serial: liteuart: add IRQ support Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 01/14] serial: liteuart: use KBUILD_MODNAME as driver name Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 02/14] serial: liteuart: use bit number macros Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 03/14] serial: liteuart: remove unused uart_ops stubs Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 04/14] serial: liteuart: don't set unused port fields Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 05/14] serial: liteuart: minor style fix in liteuart_init() Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 06/14] serial: liteuart: move tty_flip_buffer_push() out of rx loop Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 07/14] serial: liteuart: rx loop should only ack rx events Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 08/14] serial: liteuart: simplify passing of uart_insert_char() flag Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 09/14] serial: liteuart: fix rx loop variable types Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 10/14] serial: liteuart: separate rx loop from poll timer Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 11/14] serial: liteuart: move function definitions Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 12/14] serial: liteuart: add IRQ support for the RX path Gabriel Somlo
2022-11-18 13:58 ` Ilpo Järvinen
2022-11-18 14:26 ` Gabriel L. Somlo
2022-11-18 14:30 ` Ilpo Järvinen [this message]
2022-11-18 14:36 ` Gabriel L. Somlo
2022-11-16 14:49 ` [PATCH v4 13/14] serial: liteuart: add IRQ support for the TX path Gabriel Somlo
2022-11-18 14:01 ` Ilpo Järvinen
2022-11-16 14:49 ` [PATCH v4 14/14] serial: liteuart: move polling putchar() function Gabriel Somlo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26f43d54-7ee6-d05e-5c1c-4bc37f06077@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=david.abdurachmanov@gmail.com \
--cc=florent@enjoy-digital.fr \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=gsomlo@gmail.com \
--cc=jirislaby@kernel.org \
--cc=joel@jms.id.au \
--cc=kgugala@antmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=mholenko@antmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox