From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: linux-kernel@vger.kernel.org, x86@kernel.org,
kexec@lists.infradead.org, ebiederm@xmission.com,
dyoung@redhat.com, bhe@redhat.com, vgoyal@redhat.com,
Eric DeVolder <eric.devolder@oracle.com>
Cc: tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
dave.hansen@linux.intel.com, hpa@zytor.com,
nramas@linux.microsoft.com, thomas.lendacky@amd.com,
robh@kernel.org, efault@gmx.de, rppt@kernel.org,
david@redhat.com, sourabhjain@linux.ibm.com,
konrad.wilk@oracle.com, boris.ostrovsky@oracle.com,
eric.devolder@oracle.com
Subject: Re: [PATCH v9 7/7] x86/crash: Add x86 crash hotplug support
Date: Fri, 08 Jul 2022 21:38:27 +0200 [thread overview]
Message-ID: <2843978.e9J7NaK4W3@opensuse> (raw)
In-Reply-To: <20220613224240.79400-8-eric.devolder@oracle.com>
On martedì 14 giugno 2022 00:42:40 CEST Eric DeVolder wrote:
> For x86_64, when CPU or memory is hot un/plugged, the crash
> elfcorehdr, which describes the CPUs and memory in the system,
> must also be updated.
>
> When loading the crash kernel via kexec_load or kexec_file_load,
> the elfcorehdr is identified at run time in
> crash_core:handle_hotplug_event().
>
> To update the elfcorehdr for x86_64, a new elfcorehdr must be
> generated from the available CPUs and memory. The new elfcorehdr
> is prepared into a buffer, and then installed over the top of
> the existing elfcorehdr.
>
> In the patch 'kexec: exclude elfcorehdr from the segment digest'
> the need to update purgatory due to the change in elfcorehdr was
> eliminated. As a result, no changes to purgatory or boot_params
> (as the elfcorehdr= kernel command line parameter pointer
> remains unchanged and correct) are needed, just elfcorehdr.
>
> To accommodate a growing number of resources via hotplug, the
> elfcorehdr segment must be sufficiently large enough to accommodate
> changes, see the CRASH_MAX_MEMORY_RANGES configure item.
>
> With this change, crash hotplug for kexec_file_load syscall
> is supported. The kexec_load is also supported, but also
> requires a corresponding change to userspace kexec-tools.
>
> Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
> ---
> arch/x86/Kconfig | 11 ++++
> arch/x86/kernel/crash.c | 116 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 127 insertions(+)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 762a0b6ab8b6..e9eecff3b97d 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -2082,6 +2082,17 @@ config CRASH_DUMP
> (CONFIG_RELOCATABLE=y).
> For more details see Documentation/admin-guide/kdump/kdump.rst
>
> +config CRASH_MAX_MEMORY_RANGES
> + depends on CRASH_DUMP && KEXEC_FILE && (HOTPLUG_CPU ||
MEMORY_HOTPLUG)
> + int
> + default 32768
> + help
> + For the kexec_file_load path, specify the maximum number of
> + memory regions, eg. as represented by the 'System RAM' entries
> + in /proc/iomem, that the elfcorehdr buffer/segment can
accommodate.
> + This value is combined with NR_CPUS and multiplied by
Elf64_Phdr
> + size to determine the final buffer size.
> +
> config KEXEC_JUMP
> bool "kexec jump"
> depends on KEXEC && HIBERNATION
> diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
> index 9db41cce8d97..b9cdf7a0d868 100644
> --- a/arch/x86/kernel/crash.c
> +++ b/arch/x86/kernel/crash.c
> @@ -25,6 +25,7 @@
> #include <linux/slab.h>
> #include <linux/vmalloc.h>
> #include <linux/memblock.h>
> +#include <linux/highmem.h>
>
> #include <asm/processor.h>
> #include <asm/hardirq.h>
> @@ -398,7 +399,17 @@ int crash_load_segments(struct kimage *image)
> image->elf_headers = kbuf.buffer;
> image->elf_headers_sz = kbuf.bufsz;
>
> +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_MEMORY_HOTPLUG)
> + /* Ensure elfcorehdr segment large enough for hotplug changes */
> + kbuf.memsz = (CONFIG_NR_CPUS_DEFAULT +
CONFIG_CRASH_MAX_MEMORY_RANGES) * sizeof(Elf64_Phdr);
> + /* For marking as usable to crash kernel */
> + image->elf_headers_sz = kbuf.memsz;
> + /* Record the index of the elfcorehdr segment */
> + image->elfcorehdr_index = image->nr_segments;
> + image->elfcorehdr_index_valid = true;
> +#else
> kbuf.memsz = kbuf.bufsz;
> +#endif
> kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
> kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
> ret = kexec_add_buffer(&kbuf);
> @@ -413,3 +424,108 @@ int crash_load_segments(struct kimage *image)
> return ret;
> }
> #endif /* CONFIG_KEXEC_FILE */
> +
> +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_MEMORY_HOTPLUG)
> +int crash_hotplug_support(void) { return 1; }
> +void *arch_map_crash_pages(unsigned long paddr, unsigned long size)
> +{
> + /*
> + * NOTE: The addresses and sizes passed to this routine have
> + * already been fully aligned on page boundaries. There is no
> + * need for massaging the address or size.
> + */
> + void *ptr = NULL;
> +
> + /* NOTE: requires arch_kexec_[un]protect_crashkres() for write
access */
> + if (size > 0) {
> + struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
> +
> + ptr = kmap(page);
> + }
kmap_local_page() is preferred over kmap() which should be avoided in new
code (please take a look at highmem.rst which I recently updated).
Can you please check if you can easily avoid using kmap()? Otherwise, this
code will be added to my (long) queue and changed one day or the other :-)
Thanks,
Fabio
> +
> + return ptr;
> +}
> +
> +void arch_unmap_crash_pages(void **ptr)
> +{
> + if (ptr) {
> + if (*ptr)
> + kunmap(*ptr);
> + *ptr = NULL;
> + }
> +}
> +
> +/**
> + * arch_crash_handle_hotplug_event() - Handle hotplug elfcorehdr changes
> + * @image: the active struct kimage
> + * @hp_action: the hot un/plug action being handled
> + * @cpu: when KEXEC_CRASH_HP_ADD/REMOVE_CPU, the cpu affected
> + *
> + * To accurately reflect hot un/plug changes, the elfcorehdr (which
> + * is passed to the crash kernel via the elfcorehdr= parameter)
> + * must be updated with the new list of CPUs and memories. The new
> + * elfcorehdr is prepared in a kernel buffer, and then it is
> + * written on top of the existing/old elfcorehdr.
> + *
> + * For hotplug changes to elfcorehdr to work, two conditions are
> + * needed:
> + * First, the segment containing the elfcorehdr must be large enough
> + * to permit a growing number of resources. See the
> + * CONFIG_CRASH_MAX_MEMORY_RANGES description.
> + * Second, purgatory must explicitly exclude the elfcorehdr from the
> + * list of segments it checks (since the elfcorehdr changes and thus
> + * would require an update to purgatory itself to update the digest).
> + *
> + */
> +void arch_crash_handle_hotplug_event(struct kimage *image,
> + unsigned int hp_action, unsigned int cpu)
> +{
> + struct kexec_segment *ksegment;
> + unsigned char *ptr = NULL;
> + unsigned long elfsz = 0;
> + void *elfbuf = NULL;
> + unsigned long mem, memsz;
> +
> + /*
> + * Elfcorehdr_index_valid checked in
crash_core:handle_hotplug_event()
> + */
> + ksegment = &image->segment[image->elfcorehdr_index];
> + mem = ksegment->mem;
> + memsz = ksegment->memsz;
> +
> + /*
> + * Create the new elfcorehdr reflecting the changes to CPU and/or
> + * memory resources.
> + */
> + if (prepare_elf_headers(image, &elfbuf, &elfsz)) {
> + pr_err("crash hp: unable to prepare elfcore headers");
> + goto out;
> + }
> + if (elfsz > memsz) {
> + pr_err("crash hp: update elfcorehdr elfsz %lu > memsz
%lu",
> + elfsz, memsz);
> + goto out;
> + }
> +
> + /*
> + * At this point, we are all but assured of success.
> + * Copy new elfcorehdr into destination.
> + */
> + ptr = arch_map_crash_pages(mem, memsz);
> + if (ptr) {
> + /*
> + * Temporarily invalidate the crash image while the
> + * elfcorehdr is updated.
> + */
> + xchg(&kexec_crash_image, NULL);
> + memcpy_flushcache((void *)ptr, elfbuf, elfsz);
> + xchg(&kexec_crash_image, image);
> + }
> + arch_unmap_crash_pages((void **)&ptr);
> + pr_debug("crash hp: re-loaded elfcorehdr at 0x%lx\n", mem);
> +
> +out:
> + if (elfbuf)
> + vfree(elfbuf);
> +}
> +#endif
> --
> 2.31.1
>
>
next prev parent reply other threads:[~2022-07-08 19:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-13 22:42 [PATCH v9 0/7] crash: Kernel handling of CPU and memory hot un/plug Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 1/7] crash: move crash_prepare_elf64_headers Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 2/7] crash: prototype change for crash_prepare_elf64_headers Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 3/7] crash: add generic infrastructure for crash hotplug support Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 4/7] kexec: exclude elfcorehdr from the segment digest Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 5/7] kexec: exclude hot remove cpu from elfcorehdr notes Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 6/7] crash: memory and cpu hotplug sysfs attributes Eric DeVolder
2022-06-13 22:42 ` [PATCH v9 7/7] x86/crash: Add x86 crash hotplug support Eric DeVolder
2022-06-20 5:06 ` Sourabh Jain
2022-07-07 12:55 ` Eric DeVolder
2022-07-11 9:57 ` Baoquan He
2022-07-12 20:31 ` Eric DeVolder
2022-07-08 19:38 ` Fabio M. De Francesco [this message]
2022-07-08 21:07 ` Eric DeVolder
2022-07-09 18:41 ` Fabio M. De Francesco
2022-07-05 15:17 ` [PATCH v9 0/7] crash: Kernel handling of CPU and memory hot un/plug Eric DeVolder
2022-07-06 1:16 ` Baoquan He
2022-07-07 13:05 ` Eric DeVolder
2022-07-20 19:08 ` Eric DeVolder
2022-07-21 0:07 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2843978.e9J7NaK4W3@opensuse \
--to=fmdefrancesco@gmail.com \
--cc=bhe@redhat.com \
--cc=boris.ostrovsky@oracle.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=david@redhat.com \
--cc=dyoung@redhat.com \
--cc=ebiederm@xmission.com \
--cc=efault@gmx.de \
--cc=eric.devolder@oracle.com \
--cc=hpa@zytor.com \
--cc=kexec@lists.infradead.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=nramas@linux.microsoft.com \
--cc=robh@kernel.org \
--cc=rppt@kernel.org \
--cc=sourabhjain@linux.ibm.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=vgoyal@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox