* [ 001/153] sunvdc: Fix off-by-one in generic_request().
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 002/153] genirq: Avoid deadlock in spurious handling Ben Hutchings
` (153 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, David S. Miller, Mark Kettenis
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "David S. Miller" <davem@davemloft.net>
[ Upstream commit f4d9605434c0fd4cc8639bf25cfc043418c52362 ]
The 'operations' bitmap corresponds one-for-one with the operation
codes, no adjustment is necessary.
Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/block/sunvdc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -461,7 +461,7 @@ static int generic_request(struct vdc_po
int op_len, err;
void *req_buf;
- if (!(((u64)1 << ((u64)op - 1)) & port->operations))
+ if (!(((u64)1 << (u64)op) & port->operations))
return -EOPNOTSUPP;
switch (op) {
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 002/153] genirq: Avoid deadlock in spurious handling
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
2013-03-04 3:37 ` [ 001/153] sunvdc: Fix off-by-one in generic_request() Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 003/153] KVM: s390: Handle hosts not supporting s390-virtio Ben Hutchings
` (152 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Thomas Gleixner, Edward Donovan, Wang, Song-Bo (Stoney)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <tglx@linutronix.de>
commit e716efde75267eab919cdb2bef5b2cb77f305326 upstream.
commit 52553ddf(genirq: fix regression in irqfixup, irqpoll)
introduced a potential deadlock by calling the action handler with the
irq descriptor lock held.
Remove the call and let the handling code run even for an interrupt
where only a single action is registered. That matches the goal of
the above commit and avoids the deadlock.
Document the confusing action = desc->action reload in the handling
loop while at it.
Reported-and-tested-by: "Wang, Warner" <warner.wang@hp.com>
Tested-by: Edward Donovan <edward.donovan@numble.net>
Cc: "Wang, Song-Bo (Stoney)" <song-bo.wang@hp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/irq/spurious.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -80,13 +80,11 @@ static int try_one_irq(int irq, struct i
/*
* All handlers must agree on IRQF_SHARED, so we test just the
- * first. Check for action->next as well.
+ * first.
*/
action = desc->action;
if (!action || !(action->flags & IRQF_SHARED) ||
- (action->flags & __IRQF_TIMER) ||
- (action->handler(irq, action->dev_id) == IRQ_HANDLED) ||
- !action->next)
+ (action->flags & __IRQF_TIMER))
goto out;
/* Already running on another processor */
@@ -104,6 +102,7 @@ static int try_one_irq(int irq, struct i
do {
if (handle_irq_event(desc) == IRQ_HANDLED)
ret = IRQ_HANDLED;
+ /* Make sure that there is still a valid action */
action = desc->action;
} while ((desc->istate & IRQS_PENDING) && action);
desc->istate &= ~IRQS_POLL_INPROGRESS;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 003/153] KVM: s390: Handle hosts not supporting s390-virtio.
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
2013-03-04 3:37 ` [ 001/153] sunvdc: Fix off-by-one in generic_request() Ben Hutchings
2013-03-04 3:37 ` [ 002/153] genirq: Avoid deadlock in spurious handling Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 004/153] workqueue: consider work function when searching for busy work items Ben Hutchings
` (151 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Cornelia Huck, Marcelo Tosatti, Alexander Graf,
Gleb Natapov
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cornelia Huck <cornelia.huck@de.ibm.com>
commit 55c171a6d90dc0574021f9c836127cfd1a7d2e30 upstream.
Running under a kvm host does not necessarily imply the presence of
a page mapped above the main memory with the virtio information;
however, the code includes a hard coded access to that page.
Instead, check for the presence of the page and exit gracefully
before we hit an addressing exception if it does not exist.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/s390/kvm/kvm_virtio.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -414,6 +414,26 @@ static void kvm_extint_handler(unsigned
}
/*
+ * For s390-virtio, we expect a page above main storage containing
+ * the virtio configuration. Try to actually load from this area
+ * in order to figure out if the host provides this page.
+ */
+static int __init test_devices_support(unsigned long addr)
+{
+ int ret = -EIO;
+
+ asm volatile(
+ "0: lura 0,%1\n"
+ "1: xgr %0,%0\n"
+ "2:\n"
+ EX_TABLE(0b,2b)
+ EX_TABLE(1b,2b)
+ : "+d" (ret)
+ : "a" (addr)
+ : "0", "cc");
+ return ret;
+}
+/*
* Init function for virtio
* devices are in a single page above top of "normal" mem
*/
@@ -424,21 +444,23 @@ static int __init kvm_devices_init(void)
if (!MACHINE_IS_KVM)
return -ENODEV;
+ if (test_devices_support(real_memory_size) < 0)
+ return -ENODEV;
+
+ rc = vmem_add_mapping(real_memory_size, PAGE_SIZE);
+ if (rc)
+ return rc;
+
+ kvm_devices = (void *) real_memory_size;
+
kvm_root = root_device_register("kvm_s390");
if (IS_ERR(kvm_root)) {
rc = PTR_ERR(kvm_root);
printk(KERN_ERR "Could not register kvm_s390 root device");
+ vmem_remove_mapping(real_memory_size, PAGE_SIZE);
return rc;
}
- rc = vmem_add_mapping(real_memory_size, PAGE_SIZE);
- if (rc) {
- root_device_unregister(kvm_root);
- return rc;
- }
-
- kvm_devices = (void *) real_memory_size;
-
INIT_WORK(&hotplug_work, hotplug_devices);
service_subclass_irq_register();
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 004/153] workqueue: consider work function when searching for busy work items
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (2 preceding siblings ...)
2013-03-04 3:37 ` [ 003/153] KVM: s390: Handle hosts not supporting s390-virtio Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 005/153] [media] v4l: Reset subdev v4l2_dev field to NULL if registration fails Ben Hutchings
` (150 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Tejun Heo, Andrey Isakov
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit a2c1c57be8d9fd5b716113c8991d3d702eeacf77 upstream.
To avoid executing the same work item concurrenlty, workqueue hashes
currently busy workers according to their current work items and looks
up the the table when it wants to execute a new work item. If there
already is a worker which is executing the new work item, the new item
is queued to the found worker so that it gets executed only after the
current execution finishes.
Unfortunately, a work item may be freed while being executed and thus
recycled for different purposes. If it gets recycled for a different
work item and queued while the previous execution is still in
progress, workqueue may make the new work item wait for the old one
although the two aren't really related in any way.
In extreme cases, this false dependency may lead to deadlock although
it's extremely unlikely given that there aren't too many self-freeing
work item users and they usually don't wait for other work items.
To alleviate the problem, record the current work function in each
busy worker and match it together with the work item address in
find_worker_executing_work(). While this isn't complete, it ensures
that unrelated work items don't interact with each other and in the
very unlikely case where a twisted wq user triggers it, it's always
onto itself making the culprit easy to spot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Isakov <andy51@gmx.ru>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701
[bwh: Backported to 3.2:
- Adjust context
- Incorporate earlier logging cleanup in process_one_work() from
044c782ce3a9 ('workqueue: fix checkpatch issues')]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/workqueue.c | 39 +++++++++++++++++++++++++++++++--------
1 file changed, 31 insertions(+), 8 deletions(-)
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -128,6 +128,7 @@ struct worker {
};
struct work_struct *current_work; /* L: work being processed */
+ work_func_t current_func; /* L: current_work's fn */
struct cpu_workqueue_struct *current_cwq; /* L: current_work's cwq */
struct list_head scheduled; /* L: scheduled works */
struct task_struct *task; /* I: worker task */
@@ -843,7 +844,8 @@ static struct worker *__find_worker_exec
struct hlist_node *tmp;
hlist_for_each_entry(worker, tmp, bwh, hentry)
- if (worker->current_work == work)
+ if (worker->current_work == work &&
+ worker->current_func == work->func)
return worker;
return NULL;
}
@@ -853,9 +855,27 @@ static struct worker *__find_worker_exec
* @gcwq: gcwq of interest
* @work: work to find worker for
*
- * Find a worker which is executing @work on @gcwq. This function is
- * identical to __find_worker_executing_work() except that this
- * function calculates @bwh itself.
+ * Find a worker which is executing @work on @gcwq by searching
+ * @gcwq->busy_hash which is keyed by the address of @work. For a worker
+ * to match, its current execution should match the address of @work and
+ * its work function. This is to avoid unwanted dependency between
+ * unrelated work executions through a work item being recycled while still
+ * being executed.
+ *
+ * This is a bit tricky. A work item may be freed once its execution
+ * starts and nothing prevents the freed area from being recycled for
+ * another work item. If the same work item address ends up being reused
+ * before the original execution finishes, workqueue will identify the
+ * recycled work item as currently executing and make it wait until the
+ * current execution finishes, introducing an unwanted dependency.
+ *
+ * This function checks the work item address, work function and workqueue
+ * to avoid false positives. Note that this isn't complete as one may
+ * construct a work function which can introduce dependency onto itself
+ * through a recycled work item. Well, if somebody wants to shoot oneself
+ * in the foot that badly, there's only so much we can do, and if such
+ * deadlock actually occurs, it should be easy to locate the culprit work
+ * function.
*
* CONTEXT:
* spin_lock_irq(gcwq->lock).
@@ -1816,7 +1836,6 @@ __acquires(&gcwq->lock)
struct global_cwq *gcwq = cwq->gcwq;
struct hlist_head *bwh = busy_worker_head(gcwq, work);
bool cpu_intensive = cwq->wq->flags & WQ_CPU_INTENSIVE;
- work_func_t f = work->func;
int work_color;
struct worker *collision;
#ifdef CONFIG_LOCKDEP
@@ -1845,6 +1864,7 @@ __acquires(&gcwq->lock)
debug_work_deactivate(work);
hlist_add_head(&worker->hentry, bwh);
worker->current_work = work;
+ worker->current_func = work->func;
worker->current_cwq = cwq;
work_color = get_work_color(work);
@@ -1882,7 +1902,7 @@ __acquires(&gcwq->lock)
lock_map_acquire_read(&cwq->wq->lockdep_map);
lock_map_acquire(&lockdep_map);
trace_workqueue_execute_start(work);
- f(work);
+ worker->current_func(work);
/*
* While we must be careful to not use "work" after this, the trace
* point will only record its address.
@@ -1892,11 +1912,10 @@ __acquires(&gcwq->lock)
lock_map_release(&cwq->wq->lockdep_map);
if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
- printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
- "%s/0x%08x/%d\n",
- current->comm, preempt_count(), task_pid_nr(current));
- printk(KERN_ERR " last function: ");
- print_symbol("%s\n", (unsigned long)f);
+ pr_err("BUG: workqueue leaked lock or atomic: %s/0x%08x/%d\n"
+ " last function: %pf\n",
+ current->comm, preempt_count(), task_pid_nr(current),
+ worker->current_func);
debug_show_held_locks(current);
dump_stack();
}
@@ -1910,6 +1929,7 @@ __acquires(&gcwq->lock)
/* we're done with it, release */
hlist_del_init(&worker->hentry);
worker->current_work = NULL;
+ worker->current_func = NULL;
worker->current_cwq = NULL;
cwq_dec_nr_in_flight(cwq, work_color, false);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 005/153] [media] v4l: Reset subdev v4l2_dev field to NULL if registration fails
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (3 preceding siblings ...)
2013-03-04 3:37 ` [ 004/153] workqueue: consider work function when searching for busy work items Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 006/153] [media] omap_vout: find_vma() needs ->mmap_sem held Ben Hutchings
` (149 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Laurent Pinchart, Sylwester Nawrocki, Mauro Carvalho Chehab
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
commit 317efce991620adc589b3005b9baed433dcb2a56 upstream.
When subdev registration fails the subdev v4l2_dev field is left to a
non-NULL value. Later calls to v4l2_device_unregister_subdev() will
consider the subdev as registered and will module_put() the subdev
module without any matching module_get().
Fix this by setting the subdev v4l2_dev field to NULL in
v4l2_device_register_subdev() when the function fails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[bwh: Backported to 3.2: adjust context, filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -159,31 +159,21 @@ int v4l2_device_register_subdev(struct v
sd->v4l2_dev = v4l2_dev;
if (sd->internal_ops && sd->internal_ops->registered) {
err = sd->internal_ops->registered(sd);
- if (err) {
- module_put(sd->owner);
- return err;
- }
+ if (err)
+ goto error_module;
}
/* This just returns 0 if either of the two args is NULL */
err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler);
- if (err) {
- if (sd->internal_ops && sd->internal_ops->unregistered)
- sd->internal_ops->unregistered(sd);
- module_put(sd->owner);
- return err;
- }
+ if (err)
+ goto error_unregister;
#if defined(CONFIG_MEDIA_CONTROLLER)
/* Register the entity. */
if (v4l2_dev->mdev) {
err = media_device_register_entity(v4l2_dev->mdev, entity);
- if (err < 0) {
- if (sd->internal_ops && sd->internal_ops->unregistered)
- sd->internal_ops->unregistered(sd);
- module_put(sd->owner);
- return err;
- }
+ if (err < 0)
+ goto error_unregister;
}
#endif
@@ -192,6 +182,14 @@ int v4l2_device_register_subdev(struct v
spin_unlock(&v4l2_dev->lock);
return 0;
+
+error_unregister:
+ if (sd->internal_ops && sd->internal_ops->unregistered)
+ sd->internal_ops->unregistered(sd);
+error_module:
+ module_put(sd->owner);
+ sd->v4l2_dev = NULL;
+ return err;
}
EXPORT_SYMBOL_GPL(v4l2_device_register_subdev);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 006/153] [media] omap_vout: find_vma() needs ->mmap_sem held
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (4 preceding siblings ...)
2013-03-04 3:37 ` [ 005/153] [media] v4l: Reset subdev v4l2_dev field to NULL if registration fails Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 007/153] dca: check against empty dca_domains list before unregister provider Ben Hutchings
` (148 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Al Viro, Al Viro, Sakari Ailus, Laurent Pinchart,
Archit Taneja, Prabhakar Lad, Mauro Carvalho Chehab
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <viro@ZenIV.linux.org.uk>
commit 55ee64b30a38d688232e5eb2860467dddc493573 upstream.
Walking rbtree while it's modified is a Bad Idea(tm); besides,
the result of find_vma() can be freed just as it's getting returned
to caller. Fortunately, it's easy to fix - just take ->mmap_sem a bit
earlier (and don't bother with find_vma() at all if virtp >= PAGE_OFFSET -
in that case we don't even look at its result).
While we are at it, what prevents VIDIOC_PREPARE_BUF calling
v4l_prepare_buf() -> (e.g) vb2_ioctl_prepare_buf() -> vb2_prepare_buf() ->
__buf_prepare() -> __qbuf_userptr() -> vb2_vmalloc_get_userptr() -> find_vma(),
AFAICS without having taken ->mmap_sem anywhere in process? The code flow
is bloody convoluted and depends on a bunch of things done by initialization,
so I certainly might've missed something...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <archit@ti.com>
Cc: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -206,19 +206,21 @@ static u32 omap_vout_uservirt_to_phys(u3
struct vm_area_struct *vma;
struct mm_struct *mm = current->mm;
- vma = find_vma(mm, virtp);
/* For kernel direct-mapped memory, take the easy way */
- if (virtp >= PAGE_OFFSET) {
- physp = virt_to_phys((void *) virtp);
- } else if (vma && (vma->vm_flags & VM_IO) && vma->vm_pgoff) {
+ if (virtp >= PAGE_OFFSET)
+ return virt_to_phys((void *) virtp);
+
+ down_read(¤t->mm->mmap_sem);
+ vma = find_vma(mm, virtp);
+ if (vma && (vma->vm_flags & VM_IO) && vma->vm_pgoff) {
/* this will catch, kernel-allocated, mmaped-to-usermode
addresses */
physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start);
+ up_read(¤t->mm->mmap_sem);
} else {
/* otherwise, use get_user_pages() for general userland pages */
int res, nr_pages = 1;
struct page *pages;
- down_read(¤t->mm->mmap_sem);
res = get_user_pages(current, current->mm, virtp, nr_pages, 1,
0, &pages, NULL);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 007/153] dca: check against empty dca_domains list before unregister provider
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (5 preceding siblings ...)
2013-03-04 3:37 ` [ 006/153] [media] omap_vout: find_vma() needs ->mmap_sem held Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW Ben Hutchings
` (147 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Maciej Sosnowski, Jiang Liu, Gaohuai Han, Dan Williams
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej Sosnowski <maciej.sosnowski@intel.com>
commit c419fcfd071cf34ba00f9f65282583772d2655e7 upstream.
When providers get blocked unregister_dca_providers() is called ending up
with dca_providers and dca_domain lists emptied. Dca should be prevented from
trying to unregister any provider if dca_domain list is found empty.
Reported-by: Jiang Liu <jiang.liu@huawei.com>
Tested-by: Gaohuai Han <hangaohuai@huawei.com>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/dca/dca-core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -420,6 +420,11 @@ void unregister_dca_provider(struct dca_
raw_spin_lock_irqsave(&dca_lock, flags);
+ if (list_empty(&dca_domains)) {
+ raw_spin_unlock_irqrestore(&dca_lock, flags);
+ return;
+ }
+
list_del(&dca->node);
pci_rc = dca_pci_rc_from_dev(dev);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (6 preceding siblings ...)
2013-03-04 3:37 ` [ 007/153] dca: check against empty dca_domains list before unregister provider Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-08 2:51 ` Michael Neuling
2013-03-04 3:37 ` [ 009/153] ext4: return ENOMEM if sb_getblk() fails Ben Hutchings
` (146 subsequent siblings)
154 siblings, 1 reply; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Thadeu Lima de Souza Cascardo, Gavin Shan,
Benjamin Herrenschmidt
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.
The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.
Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.
Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/powerpc/include/asm/eeh.h | 3 +++
arch/powerpc/kernel/of_platform.c | 3 +++
arch/powerpc/kernel/pci-common.c | 7 +++++--
arch/powerpc/platforms/pseries/eeh.c | 24 +++++++++++++++++++++++-
4 files changed, 34 insertions(+), 3 deletions(-)
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -61,6 +61,7 @@ void __init pci_addr_cache_build(void);
*/
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_tree_late(struct pci_bus *);
+void eeh_add_sysfs_files(struct pci_bus *);
/**
* eeh_remove_device_recursive - undo EEH for device & children.
@@ -105,6 +106,8 @@ static inline void eeh_add_device_tree_e
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
+
static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(st
/* Add probed PCI devices to the device model */
pci_bus_add_devices(phb->bus);
+ /* sysfs files should only be added after devices are added */
+ eeh_add_sysfs_files(phb->bus);
+
return 0;
}
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1536,11 +1536,14 @@ void pcibios_finish_adding_to_bus(struct
pcibios_allocate_bus_resources(bus);
pcibios_claim_one_bus(bus);
+ /* Fixup EEH */
+ eeh_add_device_tree_late(bus);
+
/* Add new devices to global lists. Register in proc, sysfs. */
pci_bus_add_devices(bus);
- /* Fixup EEH */
- eeh_add_device_tree_late(bus);
+ /* sysfs files should only be added after devices are added */
+ eeh_add_sysfs_files(bus);
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1238,7 +1238,6 @@ static void eeh_add_device_late(struct p
pdn->pcidev = dev;
pci_addr_cache_insert_device(dev);
- eeh_sysfs_add_device(dev);
}
void eeh_add_device_tree_late(struct pci_bus *bus)
@@ -1257,6 +1256,29 @@ void eeh_add_device_tree_late(struct pci
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/**
+ * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to add EEH sysfs files for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
+void eeh_add_sysfs_files(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_sysfs_add_device(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_sysfs_files(subbus);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
+
+/**
* eeh_remove_device - undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW
2013-03-04 3:37 ` [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW Ben Hutchings
@ 2013-03-08 2:51 ` Michael Neuling
2013-03-08 3:29 ` Ben Hutchings
0 siblings, 1 reply; 172+ messages in thread
From: Michael Neuling @ 2013-03-08 2:51 UTC (permalink / raw)
To: Ben Hutchings
Cc: linux-kernel, stable, akpm, Thadeu Lima de Souza Cascardo,
Gavin Shan, Benjamin Herrenschmidt
This patch is breaking the celleb_defconfig on powerpc with:
arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of
function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
Mikey
On Mon, Mar 4, 2013 at 2:37 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> 3.2-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
>
> commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.
>
> The DDW code uses a eeh_dev struct from the pci_dev. However, this is
> not set until eeh_add_device_late is called.
>
> Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
> devices are added to the bus, making drivers' probe hooks to be called.
> These will call set_dma_mask, which will call the DDW code, which will
> require the eeh_dev struct from pci_dev. This would result in a crash,
> due to a NULL dereference.
>
> Calling eeh_add_device_late after pci_bus_add_devices would make the
> system BUG, because device files shouldn't be added to devices there
> were not added to the system. So, a new function is needed to add such
> files only after pci_bus_add_devices have been called.
>
> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> [bwh: Backported to 3.2: adjust context]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
> arch/powerpc/include/asm/eeh.h | 3 +++
> arch/powerpc/kernel/of_platform.c | 3 +++
> arch/powerpc/kernel/pci-common.c | 7 +++++--
> arch/powerpc/platforms/pseries/eeh.c | 24 +++++++++++++++++++++++-
> 4 files changed, 34 insertions(+), 3 deletions(-)
>
> --- a/arch/powerpc/include/asm/eeh.h
> +++ b/arch/powerpc/include/asm/eeh.h
> @@ -61,6 +61,7 @@ void __init pci_addr_cache_build(void);
> */
> void eeh_add_device_tree_early(struct device_node *);
> void eeh_add_device_tree_late(struct pci_bus *);
> +void eeh_add_sysfs_files(struct pci_bus *);
>
> /**
> * eeh_remove_device_recursive - undo EEH for device & children.
> @@ -105,6 +106,8 @@ static inline void eeh_add_device_tree_e
>
> static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
>
> +static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
> +
> static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
> #define EEH_POSSIBLE_ERROR(val, type) (0)
> #define EEH_IO_ERROR_VALUE(size) (-1UL)
> --- a/arch/powerpc/kernel/of_platform.c
> +++ b/arch/powerpc/kernel/of_platform.c
> @@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(st
> /* Add probed PCI devices to the device model */
> pci_bus_add_devices(phb->bus);
>
> + /* sysfs files should only be added after devices are added */
> + eeh_add_sysfs_files(phb->bus);
> +
> return 0;
> }
>
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -1536,11 +1536,14 @@ void pcibios_finish_adding_to_bus(struct
> pcibios_allocate_bus_resources(bus);
> pcibios_claim_one_bus(bus);
>
> + /* Fixup EEH */
> + eeh_add_device_tree_late(bus);
> +
> /* Add new devices to global lists. Register in proc, sysfs. */
> pci_bus_add_devices(bus);
>
> - /* Fixup EEH */
> - eeh_add_device_tree_late(bus);
> + /* sysfs files should only be added after devices are added */
> + eeh_add_sysfs_files(bus);
> }
> EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
>
> --- a/arch/powerpc/platforms/pseries/eeh.c
> +++ b/arch/powerpc/platforms/pseries/eeh.c
> @@ -1238,7 +1238,6 @@ static void eeh_add_device_late(struct p
> pdn->pcidev = dev;
>
> pci_addr_cache_insert_device(dev);
> - eeh_sysfs_add_device(dev);
> }
>
> void eeh_add_device_tree_late(struct pci_bus *bus)
> @@ -1257,6 +1256,29 @@ void eeh_add_device_tree_late(struct pci
> EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
>
> /**
> + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
> + * @bus: PCI bus
> + *
> + * This routine must be used to add EEH sysfs files for PCI
> + * devices which are attached to the indicated PCI bus. The PCI bus
> + * is added after system boot through hotplug or dlpar.
> + */
> +void eeh_add_sysfs_files(struct pci_bus *bus)
> +{
> + struct pci_dev *dev;
> +
> + list_for_each_entry(dev, &bus->devices, bus_list) {
> + eeh_sysfs_add_device(dev);
> + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> + struct pci_bus *subbus = dev->subordinate;
> + if (subbus)
> + eeh_add_sysfs_files(subbus);
> + }
> + }
> +}
> +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
> +
> +/**
> * eeh_remove_device - undo EEH setup for the indicated pci device
> * @dev: pci device to be removed
> *
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW
2013-03-08 2:51 ` Michael Neuling
@ 2013-03-08 3:29 ` Ben Hutchings
2013-03-12 5:31 ` powerpc/eeh: Fix compile error due to missing include file Michael Neuling
2013-03-12 18:14 ` [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW Thadeu Lima de Souza Cascardo
0 siblings, 2 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-08 3:29 UTC (permalink / raw)
To: Michael Neuling
Cc: linux-kernel, stable, akpm, Thadeu Lima de Souza Cascardo,
Gavin Shan, Benjamin Herrenschmidt
[-- Attachment #1: Type: text/plain, Size: 6178 bytes --]
On Fri, 2013-03-08 at 13:51 +1100, Michael Neuling wrote:
> This patch is breaking the celleb_defconfig on powerpc with:
>
> arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
> arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of
> function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
In 3.2 this file doesn't (directly) include <asm/eeh.h> which is where
the definition was added. In mainline it does.
Assuming that this change is actually required for 3.2 (which I'm not
sure about), I suppose we just need to add the #include.
Ben.
> Mikey
>
> On Mon, Mar 4, 2013 at 2:37 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> > 3.2-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> >
> > commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.
> >
> > The DDW code uses a eeh_dev struct from the pci_dev. However, this is
> > not set until eeh_add_device_late is called.
> >
> > Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
> > devices are added to the bus, making drivers' probe hooks to be called.
> > These will call set_dma_mask, which will call the DDW code, which will
> > require the eeh_dev struct from pci_dev. This would result in a crash,
> > due to a NULL dereference.
> >
> > Calling eeh_add_device_late after pci_bus_add_devices would make the
> > system BUG, because device files shouldn't be added to devices there
> > were not added to the system. So, a new function is needed to add such
> > files only after pci_bus_add_devices have been called.
> >
> > Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> > Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
> > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > [bwh: Backported to 3.2: adjust context]
> > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > ---
> > arch/powerpc/include/asm/eeh.h | 3 +++
> > arch/powerpc/kernel/of_platform.c | 3 +++
> > arch/powerpc/kernel/pci-common.c | 7 +++++--
> > arch/powerpc/platforms/pseries/eeh.c | 24 +++++++++++++++++++++++-
> > 4 files changed, 34 insertions(+), 3 deletions(-)
> >
> > --- a/arch/powerpc/include/asm/eeh.h
> > +++ b/arch/powerpc/include/asm/eeh.h
> > @@ -61,6 +61,7 @@ void __init pci_addr_cache_build(void);
> > */
> > void eeh_add_device_tree_early(struct device_node *);
> > void eeh_add_device_tree_late(struct pci_bus *);
> > +void eeh_add_sysfs_files(struct pci_bus *);
> >
> > /**
> > * eeh_remove_device_recursive - undo EEH for device & children.
> > @@ -105,6 +106,8 @@ static inline void eeh_add_device_tree_e
> >
> > static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
> >
> > +static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
> > +
> > static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
> > #define EEH_POSSIBLE_ERROR(val, type) (0)
> > #define EEH_IO_ERROR_VALUE(size) (-1UL)
> > --- a/arch/powerpc/kernel/of_platform.c
> > +++ b/arch/powerpc/kernel/of_platform.c
> > @@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(st
> > /* Add probed PCI devices to the device model */
> > pci_bus_add_devices(phb->bus);
> >
> > + /* sysfs files should only be added after devices are added */
> > + eeh_add_sysfs_files(phb->bus);
> > +
> > return 0;
> > }
> >
> > --- a/arch/powerpc/kernel/pci-common.c
> > +++ b/arch/powerpc/kernel/pci-common.c
> > @@ -1536,11 +1536,14 @@ void pcibios_finish_adding_to_bus(struct
> > pcibios_allocate_bus_resources(bus);
> > pcibios_claim_one_bus(bus);
> >
> > + /* Fixup EEH */
> > + eeh_add_device_tree_late(bus);
> > +
> > /* Add new devices to global lists. Register in proc, sysfs. */
> > pci_bus_add_devices(bus);
> >
> > - /* Fixup EEH */
> > - eeh_add_device_tree_late(bus);
> > + /* sysfs files should only be added after devices are added */
> > + eeh_add_sysfs_files(bus);
> > }
> > EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
> >
> > --- a/arch/powerpc/platforms/pseries/eeh.c
> > +++ b/arch/powerpc/platforms/pseries/eeh.c
> > @@ -1238,7 +1238,6 @@ static void eeh_add_device_late(struct p
> > pdn->pcidev = dev;
> >
> > pci_addr_cache_insert_device(dev);
> > - eeh_sysfs_add_device(dev);
> > }
> >
> > void eeh_add_device_tree_late(struct pci_bus *bus)
> > @@ -1257,6 +1256,29 @@ void eeh_add_device_tree_late(struct pci
> > EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
> >
> > /**
> > + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
> > + * @bus: PCI bus
> > + *
> > + * This routine must be used to add EEH sysfs files for PCI
> > + * devices which are attached to the indicated PCI bus. The PCI bus
> > + * is added after system boot through hotplug or dlpar.
> > + */
> > +void eeh_add_sysfs_files(struct pci_bus *bus)
> > +{
> > + struct pci_dev *dev;
> > +
> > + list_for_each_entry(dev, &bus->devices, bus_list) {
> > + eeh_sysfs_add_device(dev);
> > + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > + struct pci_bus *subbus = dev->subordinate;
> > + if (subbus)
> > + eeh_add_sysfs_files(subbus);
> > + }
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
> > +
> > +/**
> > * eeh_remove_device - undo EEH setup for the indicated pci device
> > * @dev: pci device to be removed
> > *
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread* powerpc/eeh: Fix compile error due to missing include file
2013-03-08 3:29 ` Ben Hutchings
@ 2013-03-12 5:31 ` Michael Neuling
2013-03-12 18:14 ` [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW Thadeu Lima de Souza Cascardo
1 sibling, 0 replies; 172+ messages in thread
From: Michael Neuling @ 2013-03-12 5:31 UTC (permalink / raw)
To: Ben Hutchings
Cc: linux-kernel, stable, akpm, Thadeu Lima de Souza Cascardo,
Gavin Shan, Benjamin Herrenschmidt
Ben Hutchings <ben@decadent.org.uk> wrote:
> On Fri, 2013-03-08 at 13:51 +1100, Michael Neuling wrote:
> > This patch is breaking the celleb_defconfig on powerpc with:
> >
> > arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
> > arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of
> > function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
>
> In 3.2 this file doesn't (directly) include <asm/eeh.h> which is where
> the definition was added. In mainline it does.
>
> Assuming that this change is actually required for 3.2 (which I'm not
> sure about), I suppose we just need to add the #include.
Yep that fixes it. Patch below (for stable 3.2 only)
From: Michael Neuling <mikey@neuling.org>
Subject: powerpc/eeh: Fix compile error due to missing include file
3.2.40 fails to compile the celleb_defconfig with the following error:
arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
The following adds the required include file to fix this.
Signed-off-by: Michael Neuling <mikey@neuling.org>
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index b10beef..601650f 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -26,6 +26,7 @@
#include <asm/topology.h>
#include <asm/pci-bridge.h>
#include <asm/ppc-pci.h>
+#include <asm/eeh.h>
#include <linux/atomic.h>
#ifdef CONFIG_PPC_OF_PLATFORM_PCI
^ permalink raw reply related [flat|nested] 172+ messages in thread
* Re: [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW
2013-03-08 3:29 ` Ben Hutchings
2013-03-12 5:31 ` powerpc/eeh: Fix compile error due to missing include file Michael Neuling
@ 2013-03-12 18:14 ` Thadeu Lima de Souza Cascardo
2013-03-12 23:17 ` Michael Neuling
1 sibling, 1 reply; 172+ messages in thread
From: Thadeu Lima de Souza Cascardo @ 2013-03-12 18:14 UTC (permalink / raw)
To: Ben Hutchings
Cc: Michael Neuling, linux-kernel, stable, akpm, Gavin Shan,
Benjamin Herrenschmidt
On Fri, Mar 08, 2013 at 03:29:55AM +0000, Ben Hutchings wrote:
> On Fri, 2013-03-08 at 13:51 +1100, Michael Neuling wrote:
> > This patch is breaking the celleb_defconfig on powerpc with:
> >
> > arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
> > arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of
> > function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
>
> In 3.2 this file doesn't (directly) include <asm/eeh.h> which is where
> the definition was added. In mainline it does.
>
> Assuming that this change is actually required for 3.2 (which I'm not
> sure about), I suppose we just need to add the #include.
>
> Ben.
>
This is not required for 3.2. The patch that *may* have broken DLPAR
(39baadbf36cee3ede5fdb8a34006d9109e5e2570) was introduced between 3.3
and 3.4.
Regards.
Cascardo.
> > Mikey
> >
> > On Mon, Mar 4, 2013 at 2:37 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> > > 3.2-stable review patch. If anyone has any objections, please let me know.
> > >
> > > ------------------
> > >
> > > From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> > >
> > > commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.
> > >
> > > The DDW code uses a eeh_dev struct from the pci_dev. However, this is
> > > not set until eeh_add_device_late is called.
> > >
> > > Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
> > > devices are added to the bus, making drivers' probe hooks to be called.
> > > These will call set_dma_mask, which will call the DDW code, which will
> > > require the eeh_dev struct from pci_dev. This would result in a crash,
> > > due to a NULL dereference.
> > >
> > > Calling eeh_add_device_late after pci_bus_add_devices would make the
> > > system BUG, because device files shouldn't be added to devices there
> > > were not added to the system. So, a new function is needed to add such
> > > files only after pci_bus_add_devices have been called.
> > >
> > > Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> > > Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
> > > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > [bwh: Backported to 3.2: adjust context]
> > > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > > ---
> > > arch/powerpc/include/asm/eeh.h | 3 +++
> > > arch/powerpc/kernel/of_platform.c | 3 +++
> > > arch/powerpc/kernel/pci-common.c | 7 +++++--
> > > arch/powerpc/platforms/pseries/eeh.c | 24 +++++++++++++++++++++++-
> > > 4 files changed, 34 insertions(+), 3 deletions(-)
> > >
> > > --- a/arch/powerpc/include/asm/eeh.h
> > > +++ b/arch/powerpc/include/asm/eeh.h
> > > @@ -61,6 +61,7 @@ void __init pci_addr_cache_build(void);
> > > */
> > > void eeh_add_device_tree_early(struct device_node *);
> > > void eeh_add_device_tree_late(struct pci_bus *);
> > > +void eeh_add_sysfs_files(struct pci_bus *);
> > >
> > > /**
> > > * eeh_remove_device_recursive - undo EEH for device & children.
> > > @@ -105,6 +106,8 @@ static inline void eeh_add_device_tree_e
> > >
> > > static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
> > >
> > > +static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
> > > +
> > > static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
> > > #define EEH_POSSIBLE_ERROR(val, type) (0)
> > > #define EEH_IO_ERROR_VALUE(size) (-1UL)
> > > --- a/arch/powerpc/kernel/of_platform.c
> > > +++ b/arch/powerpc/kernel/of_platform.c
> > > @@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(st
> > > /* Add probed PCI devices to the device model */
> > > pci_bus_add_devices(phb->bus);
> > >
> > > + /* sysfs files should only be added after devices are added */
> > > + eeh_add_sysfs_files(phb->bus);
> > > +
> > > return 0;
> > > }
> > >
> > > --- a/arch/powerpc/kernel/pci-common.c
> > > +++ b/arch/powerpc/kernel/pci-common.c
> > > @@ -1536,11 +1536,14 @@ void pcibios_finish_adding_to_bus(struct
> > > pcibios_allocate_bus_resources(bus);
> > > pcibios_claim_one_bus(bus);
> > >
> > > + /* Fixup EEH */
> > > + eeh_add_device_tree_late(bus);
> > > +
> > > /* Add new devices to global lists. Register in proc, sysfs. */
> > > pci_bus_add_devices(bus);
> > >
> > > - /* Fixup EEH */
> > > - eeh_add_device_tree_late(bus);
> > > + /* sysfs files should only be added after devices are added */
> > > + eeh_add_sysfs_files(bus);
> > > }
> > > EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
> > >
> > > --- a/arch/powerpc/platforms/pseries/eeh.c
> > > +++ b/arch/powerpc/platforms/pseries/eeh.c
> > > @@ -1238,7 +1238,6 @@ static void eeh_add_device_late(struct p
> > > pdn->pcidev = dev;
> > >
> > > pci_addr_cache_insert_device(dev);
> > > - eeh_sysfs_add_device(dev);
> > > }
> > >
> > > void eeh_add_device_tree_late(struct pci_bus *bus)
> > > @@ -1257,6 +1256,29 @@ void eeh_add_device_tree_late(struct pci
> > > EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
> > >
> > > /**
> > > + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
> > > + * @bus: PCI bus
> > > + *
> > > + * This routine must be used to add EEH sysfs files for PCI
> > > + * devices which are attached to the indicated PCI bus. The PCI bus
> > > + * is added after system boot through hotplug or dlpar.
> > > + */
> > > +void eeh_add_sysfs_files(struct pci_bus *bus)
> > > +{
> > > + struct pci_dev *dev;
> > > +
> > > + list_for_each_entry(dev, &bus->devices, bus_list) {
> > > + eeh_sysfs_add_device(dev);
> > > + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > > + struct pci_bus *subbus = dev->subordinate;
> > > + if (subbus)
> > > + eeh_add_sysfs_files(subbus);
> > > + }
> > > + }
> > > +}
> > > +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
> > > +
> > > +/**
> > > * eeh_remove_device - undo EEH setup for the indicated pci device
> > > * @dev: pci device to be removed
> > > *
> > >
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > Please read the FAQ at http://www.tux.org/lkml/
> > >
> >
>
> --
> Ben Hutchings
> Always try to do things in chronological order;
> it's less confusing that way.
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW
2013-03-12 18:14 ` [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW Thadeu Lima de Souza Cascardo
@ 2013-03-12 23:17 ` Michael Neuling
2013-03-14 0:21 ` Ben Hutchings
0 siblings, 1 reply; 172+ messages in thread
From: Michael Neuling @ 2013-03-12 23:17 UTC (permalink / raw)
To: Thadeu Lima de Souza Cascardo
Cc: Ben Hutchings, linux-kernel, stable, akpm, Gavin Shan,
Benjamin Herrenschmidt
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> wrote:
> On Fri, Mar 08, 2013 at 03:29:55AM +0000, Ben Hutchings wrote:
> > On Fri, 2013-03-08 at 13:51 +1100, Michael Neuling wrote:
> > > This patch is breaking the celleb_defconfig on powerpc with:
> > >
> > > arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
> > > arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of
> > > function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
> >
> > In 3.2 this file doesn't (directly) include <asm/eeh.h> which is where
> > the definition was added. In mainline it does.
> >
> > Assuming that this change is actually required for 3.2 (which I'm not
> > sure about), I suppose we just need to add the #include.
> >
> > Ben.
> >
>
> This is not required for 3.2. The patch that *may* have broken DLPAR
> (39baadbf36cee3ede5fdb8a34006d9109e5e2570) was introduced between 3.3
> and 3.4.
Reverting 066f289835f09a3f744d6bac96f25e25d20b3ded (from 3.2.40) fixes
the problem for me so I'm ok if we do that instead.
Mikey
>
> Regards.
> Cascardo.
>
> > > Mikey
> > >
> > > On Mon, Mar 4, 2013 at 2:37 PM, Ben Hutchings <ben@decadent.org.uk> wrote:
> > > > 3.2-stable review patch. If anyone has any objections, please let me know.
> > > >
> > > > ------------------
> > > >
> > > > From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> > > >
> > > > commit 6a040ce72598159a74969a2d01ab0ba5ee6536b3 upstream.
> > > >
> > > > The DDW code uses a eeh_dev struct from the pci_dev. However, this is
> > > > not set until eeh_add_device_late is called.
> > > >
> > > > Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
> > > > devices are added to the bus, making drivers' probe hooks to be called.
> > > > These will call set_dma_mask, which will call the DDW code, which will
> > > > require the eeh_dev struct from pci_dev. This would result in a crash,
> > > > due to a NULL dereference.
> > > >
> > > > Calling eeh_add_device_late after pci_bus_add_devices would make the
> > > > system BUG, because device files shouldn't be added to devices there
> > > > were not added to the system. So, a new function is needed to add such
> > > > files only after pci_bus_add_devices have been called.
> > > >
> > > > Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
> > > > Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
> > > > Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > > [bwh: Backported to 3.2: adjust context]
> > > > Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> > > > ---
> > > > arch/powerpc/include/asm/eeh.h | 3 +++
> > > > arch/powerpc/kernel/of_platform.c | 3 +++
> > > > arch/powerpc/kernel/pci-common.c | 7 +++++--
> > > > arch/powerpc/platforms/pseries/eeh.c | 24 +++++++++++++++++++++++-
> > > > 4 files changed, 34 insertions(+), 3 deletions(-)
> > > >
> > > > --- a/arch/powerpc/include/asm/eeh.h
> > > > +++ b/arch/powerpc/include/asm/eeh.h
> > > > @@ -61,6 +61,7 @@ void __init pci_addr_cache_build(void);
> > > > */
> > > > void eeh_add_device_tree_early(struct device_node *);
> > > > void eeh_add_device_tree_late(struct pci_bus *);
> > > > +void eeh_add_sysfs_files(struct pci_bus *);
> > > >
> > > > /**
> > > > * eeh_remove_device_recursive - undo EEH for device & children.
> > > > @@ -105,6 +106,8 @@ static inline void eeh_add_device_tree_e
> > > >
> > > > static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
> > > >
> > > > +static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
> > > > +
> > > > static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
> > > > #define EEH_POSSIBLE_ERROR(val, type) (0)
> > > > #define EEH_IO_ERROR_VALUE(size) (-1UL)
> > > > --- a/arch/powerpc/kernel/of_platform.c
> > > > +++ b/arch/powerpc/kernel/of_platform.c
> > > > @@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(st
> > > > /* Add probed PCI devices to the device model */
> > > > pci_bus_add_devices(phb->bus);
> > > >
> > > > + /* sysfs files should only be added after devices are added */
> > > > + eeh_add_sysfs_files(phb->bus);
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > --- a/arch/powerpc/kernel/pci-common.c
> > > > +++ b/arch/powerpc/kernel/pci-common.c
> > > > @@ -1536,11 +1536,14 @@ void pcibios_finish_adding_to_bus(struct
> > > > pcibios_allocate_bus_resources(bus);
> > > > pcibios_claim_one_bus(bus);
> > > >
> > > > + /* Fixup EEH */
> > > > + eeh_add_device_tree_late(bus);
> > > > +
> > > > /* Add new devices to global lists. Register in proc, sysfs. */
> > > > pci_bus_add_devices(bus);
> > > >
> > > > - /* Fixup EEH */
> > > > - eeh_add_device_tree_late(bus);
> > > > + /* sysfs files should only be added after devices are added */
> > > > + eeh_add_sysfs_files(bus);
> > > > }
> > > > EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
> > > >
> > > > --- a/arch/powerpc/platforms/pseries/eeh.c
> > > > +++ b/arch/powerpc/platforms/pseries/eeh.c
> > > > @@ -1238,7 +1238,6 @@ static void eeh_add_device_late(struct p
> > > > pdn->pcidev = dev;
> > > >
> > > > pci_addr_cache_insert_device(dev);
> > > > - eeh_sysfs_add_device(dev);
> > > > }
> > > >
> > > > void eeh_add_device_tree_late(struct pci_bus *bus)
> > > > @@ -1257,6 +1256,29 @@ void eeh_add_device_tree_late(struct pci
> > > > EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
> > > >
> > > > /**
> > > > + * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
> > > > + * @bus: PCI bus
> > > > + *
> > > > + * This routine must be used to add EEH sysfs files for PCI
> > > > + * devices which are attached to the indicated PCI bus. The PCI bus
> > > > + * is added after system boot through hotplug or dlpar.
> > > > + */
> > > > +void eeh_add_sysfs_files(struct pci_bus *bus)
> > > > +{
> > > > + struct pci_dev *dev;
> > > > +
> > > > + list_for_each_entry(dev, &bus->devices, bus_list) {
> > > > + eeh_sysfs_add_device(dev);
> > > > + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> > > > + struct pci_bus *subbus = dev->subordinate;
> > > > + if (subbus)
> > > > + eeh_add_sysfs_files(subbus);
> > > > + }
> > > > + }
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
> > > > +
> > > > +/**
> > > > * eeh_remove_device - undo EEH setup for the indicated pci device
> > > > * @dev: pci device to be removed
> > > > *
> > > >
> > > >
> > > > --
> > > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > > > Please read the FAQ at http://www.tux.org/lkml/
> > > >
> > >
> >
> > --
> > Ben Hutchings
> > Always try to do things in chronological order;
> > it's less confusing that way.
>
>
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW
2013-03-12 23:17 ` Michael Neuling
@ 2013-03-14 0:21 ` Ben Hutchings
0 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-14 0:21 UTC (permalink / raw)
To: Michael Neuling
Cc: Thadeu Lima de Souza Cascardo, linux-kernel, stable, akpm,
Gavin Shan, Benjamin Herrenschmidt
[-- Attachment #1: Type: text/plain, Size: 1338 bytes --]
On Wed, 2013-03-13 at 10:17 +1100, Michael Neuling wrote:
> Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> wrote:
>
> > On Fri, Mar 08, 2013 at 03:29:55AM +0000, Ben Hutchings wrote:
> > > On Fri, 2013-03-08 at 13:51 +1100, Michael Neuling wrote:
> > > > This patch is breaking the celleb_defconfig on powerpc with:
> > > >
> > > > arch/powerpc/kernel/of_platform.c: In function 'of_pci_phb_probe':
> > > > arch/powerpc/kernel/of_platform.c:95:2: error: implicit declaration of
> > > > function 'eeh_add_sysfs_files' [-Werror=implicit-function-declaration]
> > >
> > > In 3.2 this file doesn't (directly) include <asm/eeh.h> which is where
> > > the definition was added. In mainline it does.
> > >
> > > Assuming that this change is actually required for 3.2 (which I'm not
> > > sure about), I suppose we just need to add the #include.
> > >
> > > Ben.
> > >
> >
> > This is not required for 3.2. The patch that *may* have broken DLPAR
> > (39baadbf36cee3ede5fdb8a34006d9109e5e2570) was introduced between 3.3
> > and 3.4.
>
> Reverting 066f289835f09a3f744d6bac96f25e25d20b3ded (from 3.2.40) fixes
> the problem for me so I'm ok if we do that instead.
Thanks all; I've queued up the revert.
Ben.
--
Ben Hutchings
Humans are not rational beings; they are rationalising beings.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread
* [ 009/153] ext4: return ENOMEM if sb_getblk() fails
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (7 preceding siblings ...)
2013-03-04 3:37 ` [ 008/153] powerpc/eeh: Fix crash when adding a device in a slot with DDW Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 010/153] pcmcia/vrc4171: Add missing spinlock init Ben Hutchings
` (145 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Theodore Tso
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit 860d21e2c585f7ee8a4ecc06f474fdc33c9474f4 upstream.
The only reason for sb_getblk() failing is if it can't allocate the
buffer_head. So ENOMEM is more appropriate than EIO. In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[bwh: Backported to 3.2:
- Adjust context
- Drop change to inline.c
- Call to ext4_ext_check() from ext4_ext_find_extent() is conditional]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/extents.c | 25 ++++++++++++++-----------
fs/ext4/indirect.c | 9 ++++++---
fs/ext4/inline.c | 2 +-
fs/ext4/inode.c | 9 +++------
fs/ext4/mmp.c | 2 ++
fs/ext4/resize.c | 8 ++++----
fs/ext4/xattr.c | 3 ++-
7 files changed, 32 insertions(+), 26 deletions(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -636,6 +636,7 @@ ext4_ext_find_extent(struct inode *inode
struct ext4_extent_header *eh;
struct buffer_head *bh;
short int depth, i, ppos = 0, alloc = 0;
+ int ret;
eh = ext_inode_hdr(inode);
depth = ext_depth(inode);
@@ -665,12 +666,15 @@ ext4_ext_find_extent(struct inode *inode
path[ppos].p_ext = NULL;
bh = sb_getblk(inode->i_sb, path[ppos].p_block);
- if (unlikely(!bh))
+ if (unlikely(!bh)) {
+ ret = -ENOMEM;
goto err;
+ }
if (!bh_uptodate_or_lock(bh)) {
trace_ext4_ext_load_extent(inode, block,
path[ppos].p_block);
- if (bh_submit_read(bh) < 0) {
+ ret = bh_submit_read(bh);
+ if (ret < 0) {
put_bh(bh);
goto err;
}
@@ -683,13 +687,15 @@ ext4_ext_find_extent(struct inode *inode
put_bh(bh);
EXT4_ERROR_INODE(inode,
"ppos %d > depth %d", ppos, depth);
+ ret = -EIO;
goto err;
}
path[ppos].p_bh = bh;
path[ppos].p_hdr = eh;
i--;
- if (need_to_validate && ext4_ext_check(inode, eh, i))
+ ret = need_to_validate ? ext4_ext_check(inode, eh, i) : 0;
+ if (ret < 0)
goto err;
}
@@ -711,7 +717,7 @@ err:
ext4_ext_drop_refs(path);
if (alloc)
kfree(path);
- return ERR_PTR(-EIO);
+ return ERR_PTR(ret);
}
/*
@@ -866,7 +872,7 @@ static int ext4_ext_split(handle_t *hand
}
bh = sb_getblk(inode->i_sb, newblock);
if (!bh) {
- err = -EIO;
+ err = -ENOMEM;
goto cleanup;
}
lock_buffer(bh);
@@ -938,7 +944,7 @@ static int ext4_ext_split(handle_t *hand
newblock = ablocks[--a];
bh = sb_getblk(inode->i_sb, newblock);
if (!bh) {
- err = -EIO;
+ err = -ENOMEM;
goto cleanup;
}
lock_buffer(bh);
@@ -1049,11 +1055,8 @@ static int ext4_ext_grow_indepth(handle_
return err;
bh = sb_getblk(inode->i_sb, newblock);
- if (!bh) {
- err = -EIO;
- ext4_std_error(inode->i_sb, err);
- return err;
- }
+ if (!bh)
+ return -ENOMEM;
lock_buffer(bh);
err = ext4_journal_get_create_access(handle, bh);
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -146,6 +146,7 @@ static Indirect *ext4_get_branch(struct
struct super_block *sb = inode->i_sb;
Indirect *p = chain;
struct buffer_head *bh;
+ int ret = -EIO;
*err = 0;
/* i_data is not going away, no lock needed */
@@ -154,8 +155,10 @@ static Indirect *ext4_get_branch(struct
goto no_block;
while (--depth) {
bh = sb_getblk(sb, le32_to_cpu(p->key));
- if (unlikely(!bh))
+ if (unlikely(!bh)) {
+ ret = -ENOMEM;
goto failure;
+ }
if (!bh_uptodate_or_lock(bh)) {
if (bh_submit_read(bh) < 0) {
@@ -177,7 +180,7 @@ static Indirect *ext4_get_branch(struct
return NULL;
failure:
- *err = -EIO;
+ *err = ret;
no_block:
return p;
}
@@ -471,7 +474,7 @@ static int ext4_alloc_branch(handle_t *h
*/
bh = sb_getblk(inode->i_sb, new_blocks[n-1]);
if (unlikely(!bh)) {
- err = -EIO;
+ err = -ENOMEM;
goto failed;
}
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -661,7 +661,7 @@ struct buffer_head *ext4_getblk(handle_t
bh = sb_getblk(inode->i_sb, map.m_pblk);
if (!bh) {
- *errp = -EIO;
+ *errp = -ENOMEM;
return NULL;
}
if (map.m_flags & EXT4_MAP_NEW) {
@@ -3575,11 +3575,8 @@ static int __ext4_get_inode_loc(struct i
iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb);
bh = sb_getblk(sb, block);
- if (!bh) {
- EXT4_ERROR_INODE_BLOCK(inode, block,
- "unable to read itable block");
- return -EIO;
- }
+ if (!bh)
+ return -ENOMEM;
if (!buffer_uptodate(bh)) {
lock_buffer(bh);
--- a/fs/ext4/mmp.c
+++ b/fs/ext4/mmp.c
@@ -41,6 +41,8 @@ static int read_mmp_block(struct super_b
* is not blocked in the elevator. */
if (!*bh)
*bh = sb_getblk(sb, mmp_block);
+ if (!*bh)
+ return -ENOMEM;
if (*bh) {
get_bh(*bh);
lock_buffer(*bh);
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -142,7 +142,7 @@ static struct buffer_head *bclean(handle
bh = sb_getblk(sb, blk);
if (!bh)
- return ERR_PTR(-EIO);
+ return ERR_PTR(-ENOMEM);
if ((err = ext4_journal_get_write_access(handle, bh))) {
brelse(bh);
bh = ERR_PTR(err);
@@ -220,7 +220,7 @@ static int setup_new_group_blocks(struct
gdb = sb_getblk(sb, block);
if (!gdb) {
- err = -EIO;
+ err = -ENOMEM;
goto exit_journal;
}
if ((err = ext4_journal_get_write_access(handle, gdb))) {
@@ -694,7 +694,7 @@ static void update_backups(struct super_
bh = sb_getblk(sb, group * bpg + blk_off);
if (!bh) {
- err = -EIO;
+ err = -ENOMEM;
break;
}
ext4_debug("update metadata backup %#04lx\n",
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -839,16 +839,17 @@ inserted:
new_bh = sb_getblk(sb, block);
if (!new_bh) {
+ error = -ENOMEM;
getblk_failed:
ext4_free_blocks(handle, inode, NULL, block, 1,
EXT4_FREE_BLOCKS_METADATA);
- error = -EIO;
goto cleanup;
}
lock_buffer(new_bh);
error = ext4_journal_get_create_access(handle, new_bh);
if (error) {
unlock_buffer(new_bh);
+ error = -EIO;
goto getblk_failed;
}
memcpy(new_bh->b_data, s->base, new_bh->b_size);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 010/153] pcmcia/vrc4171: Add missing spinlock init
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (8 preceding siblings ...)
2013-03-04 3:37 ` [ 009/153] ext4: return ENOMEM if sb_getblk() fails Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 011/153] [PARISC] Purge existing TLB entries in set_pte_at and ptep_set_wrprotect Ben Hutchings
` (144 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Jean Delvare, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jean Delvare <khali@linux-fr.org>
commit 811af9723859884f2f771f3174f3ddedab7c53b5 upstream.
It doesn't seem this spinlock was properly initialized. This bug was
introduced by commit 7a410e8d4d97457c8c381e2de9cdc7bd3306badc.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/pcmcia/vrc4171_card.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -246,6 +246,7 @@ static int pccard_init(struct pcmcia_soc
socket = &vrc4171_sockets[slot];
socket->csc_irq = search_nonuse_irq();
socket->io_irq = search_nonuse_irq();
+ spin_lock_init(&socket->lock);
return 0;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 011/153] [PARISC] Purge existing TLB entries in set_pte_at and ptep_set_wrprotect
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (9 preceding siblings ...)
2013-03-04 3:37 ` [ 010/153] pcmcia/vrc4171: Add missing spinlock init Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 012/153] ARM: PXA3xx: program the CSMSADRCFG register Ben Hutchings
` (143 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, John David Anglin, James Bottomley
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2918 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: John David Anglin <dave.anglin@bell.net>
commit 7139bc1579901b53db7e898789e916ee2fb52d78 upstream.
This patch goes a long way toward fixing the minifail bug, and
it significantly improves the stability of SMP machines such as
the rp3440. When write protecting a page for COW, we need to
purge the existing translation. Otherwise, the COW break
doesn't occur as expected because the TLB may still have a stale entry
which allows writes.
[jejb: fix up checkpatch errors]
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/parisc/include/asm/pgtable.h | 13 ++++++++++---
arch/parisc/kernel/cache.c | 18 ++++++++++++++++++
2 files changed, 28 insertions(+), 3 deletions(-)
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -12,11 +12,10 @@
#include <linux/bitops.h>
#include <linux/spinlock.h>
+#include <linux/mm_types.h>
#include <asm/processor.h>
#include <asm/cache.h>
-struct vm_area_struct;
-
/*
* kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
* memory. For the return value to be meaningful, ADDR must be >=
@@ -40,7 +39,14 @@ struct vm_area_struct;
do{ \
*(pteptr) = (pteval); \
} while(0)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+extern void purge_tlb_entries(struct mm_struct *, unsigned long);
+
+#define set_pte_at(mm, addr, ptep, pteval) \
+ do { \
+ set_pte(ptep, pteval); \
+ purge_tlb_entries(mm, addr); \
+ } while (0)
#endif /* !__ASSEMBLY__ */
@@ -464,6 +470,7 @@ static inline void ptep_set_wrprotect(st
old = pte_val(*ptep);
new = pte_val(pte_wrprotect(__pte (old)));
} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+ purge_tlb_entries(mm, addr);
#else
pte_t old_pte = *ptep;
set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -421,6 +421,24 @@ void kunmap_parisc(void *addr)
EXPORT_SYMBOL(kunmap_parisc);
#endif
+void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
+{
+ unsigned long flags;
+
+ /* Note: purge_tlb_entries can be called at startup with
+ no context. */
+
+ /* Disable preemption while we play with %sr1. */
+ preempt_disable();
+ mtsp(mm->context, 1);
+ purge_tlb_start(flags);
+ pdtlb(addr);
+ pitlb(addr);
+ purge_tlb_end(flags);
+ preempt_enable();
+}
+EXPORT_SYMBOL(purge_tlb_entries);
+
void __flush_tlb_range(unsigned long sid, unsigned long start,
unsigned long end)
{
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 012/153] ARM: PXA3xx: program the CSMSADRCFG register
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (10 preceding siblings ...)
2013-03-04 3:37 ` [ 011/153] [PARISC] Purge existing TLB entries in set_pte_at and ptep_set_wrprotect Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 013/153] USB: option: add and update Alcatel modems Ben Hutchings
` (142 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Igor Grinberg, Eric Miao, Haojian Zhuang
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Igor Grinberg <grinberg@compulab.co.il>
commit d107a204154ddd79339203c2deeb7433f0cf6777 upstream.
The Chip Select Configuration Register must be programmed to 0x2 in
order to achieve the correct behavior of the Static Memory Controller.
Without this patch devices wired to DFI and accessed through SMC cannot
be accessed after resume from S2.
Do not rely on the boot loader to program the CSMSADRCFG register by
programming it in the kernel smemc module.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/arm/mach-pxa/include/mach/smemc.h | 1 +
arch/arm/mach-pxa/smemc.c | 15 ++++++++++++++-
2 files changed, 15 insertions(+), 1 deletion(-)
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -37,6 +37,7 @@
#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */
/*
* More handy macros for PCMCIA
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void)
__raw_writel(csadrcfg[1], CSADRCFG1);
__raw_writel(csadrcfg[2], CSADRCFG2);
__raw_writel(csadrcfg[3], CSADRCFG3);
+ /* CSMSADRCFG wakes up in its default state (0), so we need to set it */
+ __raw_writel(0x2, CSMSADRCFG);
}
static struct syscore_ops smemc_syscore_ops = {
@@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_
static int __init smemc_init(void)
{
- if (cpu_is_pxa3xx())
+ if (cpu_is_pxa3xx()) {
+ /*
+ * The only documentation we have on the
+ * Chip Select Configuration Register (CSMSADRCFG) is that
+ * it must be programmed to 0x2.
+ * Moreover, in the bit definitions, the second bit
+ * (CSMSADRCFG[1]) is called "SETALWAYS".
+ * Other bits are reserved in this register.
+ */
+ __raw_writel(0x2, CSMSADRCFG);
+
register_syscore_ops(&smemc_syscore_ops);
+ }
return 0;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 013/153] USB: option: add and update Alcatel modems
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (11 preceding siblings ...)
2013-03-04 3:37 ` [ 012/153] ARM: PXA3xx: program the CSMSADRCFG register Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 014/153] quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format Ben Hutchings
` (141 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Bjørn Mork, Greg Kroah-Hartman
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2418 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <bjorn@mork.no>
commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream.
Adding three currently unsupported modems based on information
from .inf driver files:
Diag VID_1BBB&PID_0052&MI_00
AGPS VID_1BBB&PID_0052&MI_01
VOICE VID_1BBB&PID_0052&MI_02
AT VID_1BBB&PID_0052&MI_03
Modem VID_1BBB&PID_0052&MI_05
wwan VID_1BBB&PID_0052&MI_06
Diag VID_1BBB&PID_00B6&MI_00
AT VID_1BBB&PID_00B6&MI_01
Modem VID_1BBB&PID_00B6&MI_02
wwan VID_1BBB&PID_00B6&MI_03
Diag VID_1BBB&PID_00B7&MI_00
AGPS VID_1BBB&PID_00B7&MI_01
VOICE VID_1BBB&PID_00B7&MI_02
AT VID_1BBB&PID_00B7&MI_03
Modem VID_1BBB&PID_00B7&MI_04
wwan VID_1BBB&PID_00B7&MI_05
Updating the blacklist info for the X060S_X200 and X220_X500D,
reserving interfaces for a wwan driver, based on
wwan VID_1BBB&PID_0000&MI_04
wwan VID_1BBB&PID_0017&MI_06
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/serial/option.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -479,6 +479,7 @@ static const struct option_blacklist_inf
static const struct option_blacklist_info alcatel_x200_blacklist = {
.sendsetup = BIT(0) | BIT(1),
+ .reserved = BIT(4),
};
static const struct option_blacklist_info zte_0037_blacklist = {
@@ -1215,7 +1216,14 @@ static const struct usb_device_id option
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
- { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
+ .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052),
+ .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 014/153] quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (12 preceding siblings ...)
2013-03-04 3:37 ` [ 013/153] USB: option: add and update Alcatel modems Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 015/153] ext4: fix possible use-after-free with AIO Ben Hutchings
` (140 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Theodore Tso, Carlos Maiolino, Jan Kara
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit c3ad83d9efdfe6a86efd44945a781f00c879b7b4 upstream.
Otherwise, ext4 file systems with the quota featured enable will get a
very confusing "No such process" error message if the quota code is
built as a module and the quota_v2 module has not been loaded.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/linux/quota.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -413,6 +413,7 @@ struct quota_module_name {
#define INIT_QUOTA_MODULE_NAMES {\
{QFMT_VFS_OLD, "quota_v1"},\
{QFMT_VFS_V0, "quota_v2"},\
+ {QFMT_VFS_V1, "quota_v2"},\
{0, NULL}}
#endif /* __KERNEL__ */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 015/153] ext4: fix possible use-after-free with AIO
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (13 preceding siblings ...)
2013-03-04 3:37 ` [ 014/153] quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 016/153] s390/kvm: Fix store status for ACRS/FPRS Ben Hutchings
` (139 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jan Kara, Carlos Maiolino, Jeff Moyer, Theodore Tso
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <jack@suse.cz>
commit 091e26dfc156aeb3b73bc5c5f277e433ad39331c upstream.
Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/inode.c | 2 +-
fs/ext4/page-io.c | 9 ++++-----
2 files changed, 5 insertions(+), 6 deletions(-)
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2795,9 +2795,9 @@ static void ext4_end_io_dio(struct kiocb
if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
ext4_free_io_end(io_end);
out:
+ inode_dio_done(inode);
if (is_async)
aio_complete(iocb, ret, 0);
- inode_dio_done(inode);
return;
}
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -108,14 +108,13 @@ int ext4_end_io_nolock(ext4_io_end_t *io
inode->i_ino, offset, size, ret);
}
- if (io->iocb)
- aio_complete(io->iocb, io->result, 0);
-
- if (io->flag & EXT4_IO_END_DIRECT)
- inode_dio_done(inode);
/* Wake up anyone waiting on unwritten extent conversion */
if (atomic_dec_and_test(&EXT4_I(inode)->i_aiodio_unwritten))
wake_up_all(ext4_ioend_wq(io->inode));
+ if (io->flag & EXT4_IO_END_DIRECT)
+ inode_dio_done(inode);
+ if (io->iocb)
+ aio_complete(io->iocb, io->result, 0);
return ret;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 016/153] s390/kvm: Fix store status for ACRS/FPRS
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (14 preceding siblings ...)
2013-03-04 3:37 ` [ 015/153] ext4: fix possible use-after-free with AIO Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 017/153] staging: comedi: disallow COMEDI_DEVCONFIG on non-board minors Ben Hutchings
` (138 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Christian Borntraeger, Gleb Natapov, Jiri Slaby
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Borntraeger <borntraeger@de.ibm.com>
commit 15bc8d8457875f495c59d933b05770ba88d1eacb upstream.
On store status we need to copy the current state of registers
into a save area. Currently we might save stale versions:
The sie state descriptor doesnt have fields for guest ACRS,FPRS,
those registers are simply stored in the host registers. The host
program must copy these away if needed. We do that in vcpu_put/load.
If we now do a store status in KVM code between vcpu_put/load, the
saved values are not up-to-date. Lets collect the ACRS/FPRS before
saving them.
This also fixes some strange problems with hotplug and virtio-ccw,
since the low level machine check handler (on hotplug a machine check
will happen) will revalidate all registers with the content of the
save area.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
[bwh: Backported to 3.2 as done in 3.0 by Jiri Slaby]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
---
arch/s390/kvm/kvm-s390.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -597,6 +597,14 @@ int kvm_s390_vcpu_store_status(struct kv
} else
prefix = 0;
+ /*
+ * The guest FPRS and ACRS are in the host FPRS/ACRS due to the lazy
+ * copying in vcpu load/put. Lets update our copies before we save
+ * it into the save area
+ */
+ save_fp_regs(&vcpu->arch.guest_fpregs);
+ save_access_regs(vcpu->arch.guest_acrs);
+
if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs),
vcpu->arch.guest_fpregs.fprs, 128, prefix))
return -EFAULT;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 017/153] staging: comedi: disallow COMEDI_DEVCONFIG on non-board minors
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (15 preceding siblings ...)
2013-03-04 3:37 ` [ 016/153] s390/kvm: Fix store status for ACRS/FPRS Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 018/153] ALSA: usb-audio: fix Roland A-PRO support Ben Hutchings
` (137 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Ian Abbott, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Abbott <abbotti@mev.co.uk>
commit 754ab5c0e55dd118273ca2c217c4d95e9fbc8259 upstream.
Comedi has two sorts of minor devices:
(a) normal board minor devices in the range 0 to
COMEDI_NUM_BOARD_MINORS-1 inclusive; and
(b) special subdevice minor devices in the range COMEDI_NUM_BOARD_MINORS
upwards that are used to open the same underlying comedi device as the
normal board minor devices, but with non-default read and write
subdevices for asynchronous commands.
The special subdevice minor devices get created when a board supporting
asynchronous commands is attached to a normal board minor device, and
destroyed when the board is detached from the normal board minor device.
One way to attach or detach a board is by using the COMEDI_DEVCONFIG
ioctl. This should only be used on normal board minors as the special
subdevice minors are too ephemeral. In particular, the change
introduced in commit 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c ("staging:
comedi: prevent auto-unconfig of manually configured devices") breaks
horribly for special subdevice minor devices.
Since there's no legitimate use for the COMEDI_DEVCONFIG ioctl on a
special subdevice minor device node, disallow it and return -ENOTTY.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/staging/comedi/comedi_fops.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -136,6 +136,11 @@ static long comedi_unlocked_ioctl(struct
/* Device config is special, because it must work on
* an unconfigured device. */
if (cmd == COMEDI_DEVCONFIG) {
+ if (minor >= COMEDI_NUM_BOARD_MINORS) {
+ /* Device config not appropriate on non-board minors. */
+ rc = -ENOTTY;
+ goto done;
+ }
rc = do_devconfig_ioctl(dev,
(struct comedi_devconfig __user *)arg);
goto done;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 018/153] ALSA: usb-audio: fix Roland A-PRO support
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (16 preceding siblings ...)
2013-03-04 3:37 ` [ 017/153] staging: comedi: disallow COMEDI_DEVCONFIG on non-board minors Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 019/153] x86-32, mm: Rip out x86_32 NUMA remapping code Ben Hutchings
` (136 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Clemens Ladisch
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <clemens@ladisch.de>
commit 7da58046482fceb17c4a0d4afefd9507ec56de7f upstream.
The quirk for the Roland/Cakewalk A-PRO keyboards accidentally used the
wrong interface number, which prevented the driver from attaching to the
device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/usb/quirks-table.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1624,7 +1624,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
/* .vendor_name = "Roland", */
/* .product_name = "A-PRO", */
- .ifnum = 1,
+ .ifnum = 0,
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = & (const struct snd_usb_midi_endpoint_info) {
.out_cables = 0x0003,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 019/153] x86-32, mm: Rip out x86_32 NUMA remapping code
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (17 preceding siblings ...)
2013-03-04 3:37 ` [ 018/153] ALSA: usb-audio: fix Roland A-PRO support Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 020/153] ALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open() Ben Hutchings
` (135 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Dave Hansen, H. Peter Anvin
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Hansen <dave@linux.vnet.ibm.com>
commit f03574f2d5b2d6229dcdf2d322848065f72953c7 upstream.
This code was an optimization for 32-bit NUMA systems.
It has probably been the cause of a number of subtle bugs over
the years, although the conditions to excite them would have
been hard to trigger. Essentially, we remap part of the kernel
linear mapping area, and then sometimes part of that area gets
freed back in to the bootmem allocator. If those pages get
used by kernel data structures (say mem_map[] or a dentry),
there's no big deal. But, if anyone ever tried to use the
linear mapping for these pages _and_ cared about their physical
address, bad things happen.
For instance, say you passed __GFP_ZERO to the page allocator
and then happened to get handed one of these pages, it zero the
remapped page, but it would make a pte to the _old_ page.
There are probably a hundred other ways that it could screw
with things.
We don't need to hang on to performance optimizations for
these old boxes any more. All my 32-bit NUMA systems are long
dead and buried, and I probably had access to more than most
people.
This code is causing real things to break today:
https://lkml.org/lkml/2013/1/9/376
I looked in to actually fixing this, but it requires surgery
to way too much brittle code, as well as stuff like
per_cpu_ptr_to_phys().
[ hpa: Cc: this for -stable, since it is a memory corruption issue.
However, an alternative is to simply mark NUMA as depends BROKEN
rather than EXPERIMENTAL in the X86_32 subclause... ]
Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
[bwh: For 3.2, using the suggested alternative]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1150,7 +1150,7 @@ config DIRECT_GBPAGES
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && BROKEN)
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
---help---
Enable NUMA (Non Uniform Memory Access) support.
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 020/153] ALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (18 preceding siblings ...)
2013-03-04 3:37 ` [ 019/153] x86-32, mm: Rip out x86_32 NUMA remapping code Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 021/153] ext4: fix race in ext4_mb_add_n_trim() Ben Hutchings
` (134 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit 2ad779b7329d6894a80df94e693e72eaa0d56790 upstream.
If the driver detects and invalid ELD, it gives an open error.
But it forgot to release the assigned pin, converter and spdif ctls
before returning.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/pci/hda/patch_hdmi.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -918,8 +918,12 @@ static int hdmi_pcm_open(struct hda_pcm_
if (!static_hdmi_pcm && eld->eld_valid) {
snd_hdmi_eld_update_pcm_info(eld, hinfo);
if (hinfo->channels_min > hinfo->channels_max ||
- !hinfo->rates || !hinfo->formats)
+ !hinfo->rates || !hinfo->formats) {
+ per_cvt->assigned = 0;
+ hinfo->nid = 0;
+ snd_hda_spdif_ctls_unassign(codec, pin_idx);
return -ENODEV;
+ }
}
/* Store the updated parameters */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 021/153] ext4: fix race in ext4_mb_add_n_trim()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (19 preceding siblings ...)
2013-03-04 3:37 ` [ 020/153] ALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open() Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 022/153] zram: Fix deadlock bug in partial read/write Ben Hutchings
` (133 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Niu Yawei, Niu Yawei, Theodore Tso
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Niu Yawei <yawei.niu@gmail.com>
commit f1167009711032b0d747ec89a632a626c901a1ad upstream.
In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/mballoc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4178,7 +4178,7 @@ static void ext4_mb_add_n_trim(struct ex
/* The max size of hash table is PREALLOC_TB_SIZE */
order = PREALLOC_TB_SIZE - 1;
/* Add the prealloc space to lg */
- rcu_read_lock();
+ spin_lock(&lg->lg_prealloc_lock);
list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
pa_inode_list) {
spin_lock(&tmp_pa->pa_lock);
@@ -4202,12 +4202,12 @@ static void ext4_mb_add_n_trim(struct ex
if (!added)
list_add_tail_rcu(&pa->pa_inode_list,
&lg->lg_prealloc_list[order]);
- rcu_read_unlock();
+ spin_unlock(&lg->lg_prealloc_lock);
/* Now trim the list to be not more than 8 elements */
if (lg_prealloc_count > 8) {
ext4_mb_discard_lg_preallocations(sb, lg,
- order, lg_prealloc_count);
+ order, lg_prealloc_count);
return;
}
return ;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 022/153] zram: Fix deadlock bug in partial read/write
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (20 preceding siblings ...)
2013-03-04 3:37 ` [ 021/153] ext4: fix race in ext4_mb_add_n_trim() Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 023/153] Driver core: treat unregistered bus_types as having no devices Ben Hutchings
` (132 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Minchan Kim, Jerome Marchand, Nitin Gupta, Pekka Enberg,
Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Minchan Kim <minchan@kernel.org>
commit 7e5a5104c6af709a8d97d5f4711e7c917761d464 upstream.
Now zram allocates new page with GFP_KERNEL in zram I/O path
if IO is partial. Unfortunately, It may cause deadlock with
reclaim path like below.
write_page from fs
fs_lock
allocation(GFP_KERNEL)
reclaim
pageout
write_page from fs
fs_lock <-- deadlock
This patch fixes it by using GFP_NOIO. In read path, we
reorganize code flow so that kmap_atomic is called after the
GFP_NOIO allocation.
Acked-by: Jerome Marchand <jmarchand@redhat.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
[ penberg@kernel.org: don't use GFP_ATOMIC ]
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: no reordering is needed in the read path]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/staging/zram/zram_drv.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -242,7 +242,7 @@ static int zram_bvec_read(struct zram *z
if (is_partial_io(bvec)) {
/* Use a temporary buffer to decompress the page */
- uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
if (!uncmem) {
pr_info("Error allocating temp memory!\n");
return -ENOMEM;
@@ -338,7 +338,7 @@ static int zram_bvec_write(struct zram *
* This is a partial IO. We need to read the full page
* before to write the changes.
*/
- uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
if (!uncmem) {
pr_info("Error allocating temp memory!\n");
ret = -ENOMEM;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 023/153] Driver core: treat unregistered bus_types as having no devices
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (21 preceding siblings ...)
2013-03-04 3:37 ` [ 022/153] zram: Fix deadlock bug in partial read/write Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 024/153] ALSA: aloop: Fix Oops while PM resume Ben Hutchings
` (131 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Bjorn Helgaas, Joonsoo Kim, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <bhelgaas@google.com>
commit 4fa3e78be7e985ca814ce2aa0c09cbee404efcf7 upstream.
A bus_type has a list of devices (klist_devices), but the list and the
subsys_private structure that contains it are not initialized until the
bus_type is registered with bus_register().
The panic/reboot path has fixups that look up devices in pci_bus_type. If
we panic before registering pci_bus_type, the bus_type exists but the list
does not, so mach_reboot_fixups() trips over a null pointer and panics
again:
mach_reboot_fixups
pci_get_device
..
bus_find_device(&pci_bus_type, ...)
bus->p is NULL
Joonsoo reported a problem when panicking before PCI was initialized.
I think this patch should be sufficient to replace the patch he posted
here: https://lkml.org/lkml/2012/12/28/75 ("[PATCH] x86, reboot: skip
reboot_fixups in early boot phase")
Reported-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/base/bus.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -289,7 +289,7 @@ int bus_for_each_dev(struct bus_type *bu
struct device *dev;
int error = 0;
- if (!bus)
+ if (!bus || !bus->p)
return -EINVAL;
klist_iter_init_node(&bus->p->klist_devices, &i,
@@ -323,7 +323,7 @@ struct device *bus_find_device(struct bu
struct klist_iter i;
struct device *dev;
- if (!bus)
+ if (!bus || !bus->p)
return NULL;
klist_iter_init_node(&bus->p->klist_devices, &i,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 024/153] ALSA: aloop: Fix Oops while PM resume
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (22 preceding siblings ...)
2013-03-04 3:37 ` [ 023/153] Driver core: treat unregistered bus_types as having no devices Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 025/153] UBIFS: fix double free of ubifs_orphan objects Ben Hutchings
` (130 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit edac894389f9c9de2a1368c78809c824b343f3a5 upstream.
snd-aloop driver has no proper PM implementation, thus the PM resume
may trigger Oops due to leftover timer instance. This patch adds the
missing suspend/resume implementation.
Reported-and-tested-by: El boulangero <elboulangero@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/drivers/aloop.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -287,12 +287,14 @@ static int loopback_trigger(struct snd_p
loopback_active_notify(dpcm);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
spin_lock(&cable->lock);
cable->pause |= stream;
spin_unlock(&cable->lock);
loopback_timer_stop(dpcm);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_RESUME:
spin_lock(&cable->lock);
dpcm->last_jiffies = jiffies;
cable->pause &= ~stream;
@@ -552,7 +554,8 @@ static snd_pcm_uframes_t loopback_pointe
static struct snd_pcm_hardware loopback_pcm_hardware =
{
.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_PAUSE),
+ SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME),
.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |
SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE),
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 025/153] UBIFS: fix double free of ubifs_orphan objects
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (23 preceding siblings ...)
2013-03-04 3:37 ` [ 024/153] ALSA: aloop: Fix Oops while PM resume Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 026/153] tty: set_termios/set_termiox should not return -EINTR Ben Hutchings
` (129 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Adam Thomas, Artem Bityutskiy
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Thomas <adamthomas1111@gmail.com>
commit 8afd500cb52a5d00bab4525dd5a560d199f979b9 upstream.
The last orphan in the dnext list has its dnext set to NULL. Because
of that, ubifs_delete_orphan assumes that it is not on the dnext list
and frees it immediately instead ignoring it as a second delete. The
orphan is later freed again by erase_deleted.
This change adds an explicit flag to ubifs_orphan indicating whether
it is pending delete.
Signed-off-by: Adam Thomas <adamthomas1111@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ubifs/orphan.c | 5 ++++-
fs/ubifs/ubifs.h | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -130,13 +130,14 @@ void ubifs_delete_orphan(struct ubifs_in
else if (inum > o->inum)
p = p->rb_right;
else {
- if (o->dnext) {
+ if (o->del) {
spin_unlock(&c->orphan_lock);
dbg_gen("deleted twice ino %lu",
(unsigned long)inum);
return;
}
if (o->cnext) {
+ o->del = 1;
o->dnext = c->orph_dnext;
c->orph_dnext = o;
spin_unlock(&c->orphan_lock);
@@ -447,6 +448,7 @@ static void erase_deleted(struct ubifs_i
orphan = dnext;
dnext = orphan->dnext;
ubifs_assert(!orphan->new);
+ ubifs_assert(orphan->del);
rb_erase(&orphan->rb, &c->orph_tree);
list_del(&orphan->list);
c->tot_orphans -= 1;
@@ -536,6 +538,7 @@ static int insert_dead_orphan(struct ubi
rb_link_node(&orphan->rb, parent, p);
rb_insert_color(&orphan->rb, &c->orph_tree);
list_add_tail(&orphan->list, &c->orph_list);
+ orphan->del = 1;
orphan->dnext = c->orph_dnext;
c->orph_dnext = orphan;
dbg_mnt("ino %lu, new %d, tot %d", (unsigned long)inum,
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -908,6 +908,7 @@ struct ubifs_budget_req {
* @dnext: next orphan to delete
* @inum: inode number
* @new: %1 => added since the last commit, otherwise %0
+ * @del: %1 => delete pending, otherwise %0
*/
struct ubifs_orphan {
struct rb_node rb;
@@ -917,6 +918,7 @@ struct ubifs_orphan {
struct ubifs_orphan *dnext;
ino_t inum;
int new;
+ unsigned del:1;
};
/**
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 026/153] tty: set_termios/set_termiox should not return -EINTR
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (24 preceding siblings ...)
2013-03-04 3:37 ` [ 025/153] UBIFS: fix double free of ubifs_orphan objects Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 027/153] hrtimer: Prevent hrtimer_enqueue_reprogram race Ben Hutchings
` (128 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Oleg Nesterov, Roman Rakus, Lingzhu Xiang, Jiri Slaby,
Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit 183d95cdd834381c594d3aa801c1f9f9c0c54fa9 upstream.
See https://bugzilla.redhat.com/show_bug.cgi?id=904907
read command causes bash to abort with double free or corruption (out).
A simple test-case from Roman:
// Compile the reproducer and send sigchld ti that process.
// EINTR occurs even if SA_RESTART flag is set.
void handler(int sig)
{
}
main()
{
struct sigaction act;
act.sa_handler = handler;
act.sa_flags = SA_RESTART;
sigaction (SIGCHLD, &act, 0);
struct termio ttp;
ioctl(0, TCGETA, &ttp);
while(1)
{
if (ioctl(0, TCSETAW, ttp) < 0)
{
if (errno == EINTR)
{
fprintf(stderr, "BUG!"); return(1);
}
}
}
}
Change set_termios/set_termiox to return -ERESTARTSYS to fix this
particular problem.
I didn't dare to change other EINTR's in drivers/tty/, but they look
equally wrong.
Reported-by: Roman Rakus <rrakus@redhat.com>
Reported-by: Lingzhu Xiang <lxiang@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/tty/tty_ioctl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -618,7 +618,7 @@ static int set_termios(struct tty_struct
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
- return -EINTR;
+ return -ERESTARTSYS;
}
tty_set_termios(tty, &tmp_termios);
@@ -685,7 +685,7 @@ static int set_termiox(struct tty_struct
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
- return -EINTR;
+ return -ERESTARTSYS;
}
mutex_lock(&tty->termios_mutex);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 027/153] hrtimer: Prevent hrtimer_enqueue_reprogram race
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (25 preceding siblings ...)
2013-03-04 3:37 ` [ 026/153] tty: set_termios/set_termiox should not return -EINTR Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 028/153] nfsd: Fix memleak Ben Hutchings
` (127 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Leonid Shatz, Izik Eidus, Andrea Arcangeli, Thomas Gleixner
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Leonid Shatz <leonid.shatz@ravellosystems.com>
commit b22affe0aef429d657bc6505aacb1c569340ddd2 upstream.
hrtimer_enqueue_reprogram contains a race which could result in
timer.base switch during unlock/lock sequence.
hrtimer_enqueue_reprogram is releasing the lock protecting the timer
base for calling raise_softirq_irqsoff() due to a lock ordering issue
versus rq->lock.
If during that time another CPU calls __hrtimer_start_range_ns() on
the same hrtimer, the timer base might switch, before the current CPU
can lock base->lock again and therefor the unlock_timer_base() call
will unlock the wrong lock.
[ tglx: Added comment and massaged changelog ]
Signed-off-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Izik Eidus <izik.eidus@ravellosystems.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Link: http://lkml.kernel.org/r/1359981217-389-1-git-send-email-izik.eidus@ravellosystems.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/hrtimer.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -640,21 +640,9 @@ static inline void hrtimer_init_hres(str
* and expiry check is done in the hrtimer_interrupt or in the softirq.
*/
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
- struct hrtimer_clock_base *base,
- int wakeup)
+ struct hrtimer_clock_base *base)
{
- if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
- if (wakeup) {
- raw_spin_unlock(&base->cpu_base->lock);
- raise_softirq_irqoff(HRTIMER_SOFTIRQ);
- raw_spin_lock(&base->cpu_base->lock);
- } else
- __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
-
- return 1;
- }
-
- return 0;
+ return base->cpu_base->hres_active && hrtimer_reprogram(timer, base);
}
static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
@@ -735,8 +723,7 @@ static inline int hrtimer_switch_to_hres
static inline void
hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
- struct hrtimer_clock_base *base,
- int wakeup)
+ struct hrtimer_clock_base *base)
{
return 0;
}
@@ -995,8 +982,21 @@ int __hrtimer_start_range_ns(struct hrti
*
* XXX send_remote_softirq() ?
*/
- if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
- hrtimer_enqueue_reprogram(timer, new_base, wakeup);
+ if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
+ && hrtimer_enqueue_reprogram(timer, new_base)) {
+ if (wakeup) {
+ /*
+ * We need to drop cpu_base->lock to avoid a
+ * lock ordering issue vs. rq->lock.
+ */
+ raw_spin_unlock(&new_base->cpu_base->lock);
+ raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+ local_irq_restore(flags);
+ return ret;
+ } else {
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+ }
+ }
unlock_hrtimer_base(timer, &flags);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 028/153] nfsd: Fix memleak
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (26 preceding siblings ...)
2013-03-04 3:37 ` [ 027/153] hrtimer: Prevent hrtimer_enqueue_reprogram race Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 029/153] staging: comedi: check s->async for poll(), read() and write() Ben Hutchings
` (126 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, majianpeng, J. Bruce Fields
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: majianpeng <majianpeng@gmail.com>
commit 2d32b29a1c2830f7c42caa8258c714acd983961f upstream.
When free nfs-client, it must free the ->cl_stateids.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/nfsd/nfs4state.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1009,6 +1009,8 @@ free_client(struct nfs4_client *clp)
put_group_info(clp->cl_cred.cr_group_info);
kfree(clp->cl_principal);
kfree(clp->cl_name.data);
+ idr_remove_all(&clp->cl_stateids);
+ idr_destroy(&clp->cl_stateids);
kfree(clp);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 029/153] staging: comedi: check s->async for poll(), read() and write()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (27 preceding siblings ...)
2013-03-04 3:37 ` [ 028/153] nfsd: Fix memleak Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 030/153] ACPI: Add DMI entry for Sony VGN-FW41E_H Ben Hutchings
` (125 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Ian Abbott
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Abbott <abbotti@mev.co.uk>
commit cc400e185c07c15a42d2635995f422de5b94b696 upstream.
Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or
`dev->write_subdev` to a subdevice that does not support asynchronous
commands. Comedi's poll(), read() and write() file operation handlers
assume these subdevices do support asynchronous commands. In
particular, they assume `s->async` is valid (where `s` points to the
read or write subdevice), which it won't be if it has been set
incorrectly. This can lead to a NULL pointer dereference.
Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and
`comedi_write()` to avoid the bug.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/staging/comedi/comedi_fops.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1574,7 +1574,7 @@ static unsigned int comedi_poll(struct f
mask = 0;
read_subdev = comedi_get_read_subdevice(dev_file_info);
- if (read_subdev) {
+ if (read_subdev && read_subdev->async) {
poll_wait(file, &read_subdev->async->wait_head, wait);
if (!read_subdev->busy
|| comedi_buf_read_n_available(read_subdev->async) > 0
@@ -1584,7 +1584,7 @@ static unsigned int comedi_poll(struct f
}
}
write_subdev = comedi_get_write_subdevice(dev_file_info);
- if (write_subdev) {
+ if (write_subdev && write_subdev->async) {
poll_wait(file, &write_subdev->async->wait_head, wait);
comedi_buf_write_alloc(write_subdev->async,
write_subdev->async->prealloc_bufsz);
@@ -1626,7 +1626,7 @@ static ssize_t comedi_write(struct file
}
s = comedi_get_write_subdevice(dev_file_info);
- if (s == NULL) {
+ if (s == NULL || s->async == NULL) {
retval = -EIO;
goto done;
}
@@ -1737,7 +1737,7 @@ static ssize_t comedi_read(struct file *
}
s = comedi_get_read_subdevice(dev_file_info);
- if (s == NULL) {
+ if (s == NULL || s->async == NULL) {
retval = -EIO;
goto done;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 030/153] ACPI: Add DMI entry for Sony VGN-FW41E_H
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (28 preceding siblings ...)
2013-03-04 3:37 ` [ 029/153] staging: comedi: check s->async for poll(), read() and write() Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 031/153] vgacon/vt: clear buffer attributes when we load a 512 character font (v2) Ben Hutchings
` (124 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Joseph Salisbury, Rafael J. Wysocki
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joseph Salisbury <joseph.salisbury@canonical.com>
commit 66f2fda93b67fa744d406e6dcf443f67bac204b6 upstream.
This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.
References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/acpi/sleep.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -156,6 +156,14 @@ static struct dmi_system_id __initdata a
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW41E_H",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VGN-FW21E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 031/153] vgacon/vt: clear buffer attributes when we load a 512 character font (v2)
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (29 preceding siblings ...)
2013-03-04 3:37 ` [ 030/153] ACPI: Add DMI entry for Sony VGN-FW41E_H Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 032/153] fbcon: dont lose the console font across generic->chip driver switch Ben Hutchings
` (123 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Dave Airlie
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <airlied@redhat.com>
commit 2a2483072393b27f4336ab068a1f48ca19ff1c1e upstream.
When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.
The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.
A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.
v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/tty/vt/vt.c | 2 +-
drivers/video/console/vgacon.c | 22 +++++++++++++++-------
include/linux/vt_kern.h | 1 +
3 files changed, 17 insertions(+), 8 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -657,7 +657,7 @@ static inline void save_screen(struct vc
* Redrawing of screen
*/
-static void clear_buffer_attributes(struct vc_data *vc)
+void clear_buffer_attributes(struct vc_data *vc)
{
unsigned short *p = (unsigned short *)vc->vc_origin;
int count = vc->vc_screenbuf_size / 2;
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1064,7 +1064,7 @@ static int vgacon_do_font_op(struct vgas
unsigned short video_port_status = vga_video_port_reg + 6;
int font_select = 0x00, beg, i;
char *charmap;
-
+ bool clear_attribs = false;
if (vga_video_type != VIDEO_TYPE_EGAM) {
charmap = (char *) VGA_MAP_MEM(colourmap, 0);
beg = 0x0e;
@@ -1169,12 +1169,6 @@ static int vgacon_do_font_op(struct vgas
/* if 512 char mode is already enabled don't re-enable it. */
if ((set) && (ch512 != vga_512_chars)) {
- /* attribute controller */
- for (i = 0; i < MAX_NR_CONSOLES; i++) {
- struct vc_data *c = vc_cons[i].d;
- if (c && c->vc_sw == &vga_con)
- c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
- }
vga_512_chars = ch512;
/* 256-char: enable intensity bit
512-char: disable intensity bit */
@@ -1185,8 +1179,22 @@ static int vgacon_do_font_op(struct vgas
it means, but it works, and it appears necessary */
inb_p(video_port_status);
vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
+ clear_attribs = true;
}
raw_spin_unlock_irq(&vga_lock);
+
+ if (clear_attribs) {
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ struct vc_data *c = vc_cons[i].d;
+ if (c && c->vc_sw == &vga_con) {
+ /* force hi font mask to 0, so we always clear
+ the bit on either transition */
+ c->vc_hi_font_mask = 0x00;
+ clear_buffer_attributes(c);
+ c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
+ }
+ }
+ }
return 0;
}
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -47,6 +47,7 @@ int con_set_cmap(unsigned char __user *c
int con_get_cmap(unsigned char __user *cmap);
void scrollback(struct vc_data *vc, int lines);
void scrollfront(struct vc_data *vc, int lines);
+void clear_buffer_attributes(struct vc_data *vc);
void update_region(struct vc_data *vc, unsigned long start, int count);
void redraw_screen(struct vc_data *vc, int is_switch);
#define update_screen(x) redraw_screen(x, 0)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 032/153] fbcon: dont lose the console font across generic->chip driver switch
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (30 preceding siblings ...)
2013-03-04 3:37 ` [ 031/153] vgacon/vt: clear buffer attributes when we load a 512 character font (v2) Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 033/153] drm/usb: bind driver to correct device Ben Hutchings
` (122 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Dave Airlie, Kay Sievers
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <airlied@redhat.com>
commit ae1287865f5361fa138d4d3b1b6277908b54eac9 upstream.
If grub2 loads efifb/vesafb, then when systemd starts it can set the console
font on that framebuffer device, however when we then load the native KMS
driver, the first thing it does is tear down the generic framebuffer driver.
The thing is the generic code is doing the right thing, it frees the font
because otherwise it would leak memory. However we can assume that if you
are removing the generic firmware driver (vesa/efi/offb), that a new driver
*should* be loading soon after, so we effectively leak the font.
However the old code left a dangling pointer in vc->vc_font.data and we
can now reuse that dangling pointer to load the font into the new
driver, now that we aren't freeing it.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/video/console/fbcon.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -991,7 +991,7 @@ static const char *fbcon_startup(void)
}
/* Setup default font */
- if (!p->fontdata) {
+ if (!p->fontdata && !vc->vc_font.data) {
if (!fontname[0] || !(font = find_font(fontname)))
font = get_default_font(info->var.xres,
info->var.yres,
@@ -1001,6 +1001,8 @@ static const char *fbcon_startup(void)
vc->vc_font.height = font->height;
vc->vc_font.data = (void *)(p->fontdata = font->data);
vc->vc_font.charcount = 256; /* FIXME Need to support more fonts */
+ } else {
+ p->fontdata = vc->vc_font.data;
}
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
@@ -1160,9 +1162,9 @@ static void fbcon_init(struct vc_data *v
ops->p = &fb_display[fg_console];
}
-static void fbcon_free_font(struct display *p)
+static void fbcon_free_font(struct display *p, bool freefont)
{
- if (p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
+ if (freefont && p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
kfree(p->fontdata - FONT_EXTRA_WORDS * sizeof(int));
p->fontdata = NULL;
p->userfont = 0;
@@ -1174,8 +1176,8 @@ static void fbcon_deinit(struct vc_data
struct fb_info *info;
struct fbcon_ops *ops;
int idx;
+ bool free_font = true;
- fbcon_free_font(p);
idx = con2fb_map[vc->vc_num];
if (idx == -1)
@@ -1186,6 +1188,8 @@ static void fbcon_deinit(struct vc_data
if (!info)
goto finished;
+ if (info->flags & FBINFO_MISC_FIRMWARE)
+ free_font = false;
ops = info->fbcon_par;
if (!ops)
@@ -1197,6 +1201,8 @@ static void fbcon_deinit(struct vc_data
ops->flags &= ~FBCON_FLAGS_INIT;
finished:
+ fbcon_free_font(p, free_font);
+
if (!con_is_bound(&fb_con))
fbcon_exit();
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 033/153] drm/usb: bind driver to correct device
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (31 preceding siblings ...)
2013-03-04 3:37 ` [ 032/153] fbcon: dont lose the console font across generic->chip driver switch Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 034/153] x86: Do not leak kernel page mapping locations Ben Hutchings
` (121 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Dave Airlie
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dave Airlie <airlied@redhat.com>
commit 9f23de52b64f7fb801fd76f3dd8651a0dc89187b upstream.
While looking at plymouth on udl I noticed that plymouth was trying
to use its fb plugin not its drm one, it was trying to drmOpen a driver called
usb not udl, noticed that we actually had out driver pointing at the wrong
device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/drm_usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_usb.c
+++ b/drivers/gpu/drm/drm_usb.c
@@ -19,7 +19,7 @@ int drm_get_usb_dev(struct usb_interface
usbdev = interface_to_usbdev(interface);
dev->usbdev = usbdev;
- dev->dev = &usbdev->dev;
+ dev->dev = &interface->dev;
mutex_lock(&drm_global_mutex);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 034/153] x86: Do not leak kernel page mapping locations
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (32 preceding siblings ...)
2013-03-04 3:37 ` [ 033/153] drm/usb: bind driver to correct device Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 035/153] timeconst.pl: Eliminate Perl warning Ben Hutchings
` (120 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Kees Cook, Dan Rosenberg, Brad Spengler, H. Peter Anvin,
Paul E. McKenney, Frederic Weisbecker, Eric W. Biederman,
Linus Torvalds, Peter Zijlstra, Ingo Molnar
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <keescook@chromium.org>
commit e575a86fdc50d013bf3ad3aa81d9100e8e6cc60d upstream.
Without this patch, it is trivial to determine kernel page
mappings by examining the error code reported to dmesg[1].
Instead, declare the entire kernel memory space as a violation
of a present page.
Additionally, since show_unhandled_signals is enabled by
default, switch branch hinting to the more realistic
expectation, and unobfuscate the setting of the PF_PROT bit to
improve readability.
[1] http://vulnfactory.org/blog/2013/02/06/a-linux-memory-trick/
Reported-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Suggested-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130207174413.GA12485@www.outflux.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/mm/fault.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -738,13 +738,15 @@ __bad_area_nosemaphore(struct pt_regs *r
return;
}
#endif
+ /* Kernel addresses are always protection faults: */
+ if (address >= TASK_SIZE)
+ error_code |= PF_PROT;
- if (unlikely(show_unhandled_signals))
+ if (likely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);
- /* Kernel addresses are always protection faults: */
tsk->thread.cr2 = address;
- tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+ tsk->thread.error_code = error_code;
tsk->thread.trap_no = 14;
force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 035/153] timeconst.pl: Eliminate Perl warning
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (33 preceding siblings ...)
2013-03-04 3:37 ` [ 034/153] x86: Do not leak kernel page mapping locations Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 036/153] fb: rework locking to fix lock ordering on takeover Ben Hutchings
` (119 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, H. Peter Anvin, Andi Kleen
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "H. Peter Anvin" <hpa@linux.intel.com>
commit 63a3f603413ffe82ad775f2d62a5afff87fd94a0 upstream.
defined(@array) is deprecated in Perl and gives off a warning.
Restructure the code to remove that warning.
[ hpa: it would be interesting to revert to the timeconst.bc script.
It appears that the failures reported by akpm during testing of
that script was due to a known broken version of make, not a problem
with bc. The Makefile rules could probably be restructured to avoid
the make bug, or it is probably old enough that it doesn't matter. ]
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/timeconst.pl | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/kernel/timeconst.pl
+++ b/kernel/timeconst.pl
@@ -369,10 +369,8 @@ if ($hz eq '--can') {
die "Usage: $0 HZ\n";
}
- @val = @{$canned_values{$hz}};
- if (!defined(@val)) {
- @val = compute_values($hz);
- }
+ $cv = $canned_values{$hz};
+ @val = defined($cv) ? @$cv : compute_values($hz);
output($hz, @val);
}
exit 0;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 036/153] fb: rework locking to fix lock ordering on takeover
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (34 preceding siblings ...)
2013-03-04 3:37 ` [ 035/153] timeconst.pl: Eliminate Perl warning Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 037/153] fb: Yet another band-aid for fixing lockdep mess Ben Hutchings
` (118 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Alan Cox, Florian Tobias Schandinat, Stephen Rothwell,
Jiri Kosina, Sedat Dilek, Daniel Vetter, Dave Airlie
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 8850 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Cox <alan@linux.intel.com>
commit 50e244cc793d511b86adea24972f3a7264cae114 upstream.
Adjust the console layer to allow a take over call where the caller
already holds the locks. Make the fb layer lock in order.
This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.
[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/tty/vt/vt.c | 93 +++++++++++++++++++++++++++++++----------
drivers/video/console/fbcon.c | 29 ++++++++++++-
drivers/video/fbmem.c | 5 +--
drivers/video/fbsysfs.c | 3 ++
include/linux/console.h | 1 +
5 files changed, 104 insertions(+), 27 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3016,7 +3016,7 @@ int __init vty_init(const struct file_op
static struct class *vtconsole_class;
-static int bind_con_driver(const struct consw *csw, int first, int last,
+static int do_bind_con_driver(const struct consw *csw, int first, int last,
int deflt)
{
struct module *owner = csw->owner;
@@ -3027,7 +3027,7 @@ static int bind_con_driver(const struct
if (!try_module_get(owner))
return -ENODEV;
- console_lock();
+ WARN_CONSOLE_UNLOCKED();
/* check if driver is registered */
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
@@ -3112,11 +3112,22 @@ static int bind_con_driver(const struct
retval = 0;
err:
- console_unlock();
module_put(owner);
return retval;
};
+
+static int bind_con_driver(const struct consw *csw, int first, int last,
+ int deflt)
+{
+ int ret;
+
+ console_lock();
+ ret = do_bind_con_driver(csw, first, last, deflt);
+ console_unlock();
+ return ret;
+}
+
#ifdef CONFIG_VT_HW_CONSOLE_BINDING
static int con_is_graphics(const struct consw *csw, int first, int last)
{
@@ -3228,9 +3239,9 @@ int unbind_con_driver(const struct consw
if (!con_is_bound(csw))
con_driver->flag &= ~CON_DRIVER_FLAG_INIT;
- console_unlock();
/* ignore return value, binding should not fail */
- bind_con_driver(defcsw, first, last, deflt);
+ do_bind_con_driver(defcsw, first, last, deflt);
+ console_unlock();
err:
module_put(owner);
return retval;
@@ -3508,28 +3519,18 @@ int con_debug_leave(void)
}
EXPORT_SYMBOL_GPL(con_debug_leave);
-/**
- * register_con_driver - register console driver to console layer
- * @csw: console driver
- * @first: the first console to take over, minimum value is 0
- * @last: the last console to take over, maximum value is MAX_NR_CONSOLES -1
- *
- * DESCRIPTION: This function registers a console driver which can later
- * bind to a range of consoles specified by @first and @last. It will
- * also initialize the console driver by calling con_startup().
- */
-int register_con_driver(const struct consw *csw, int first, int last)
+static int do_register_con_driver(const struct consw *csw, int first, int last)
{
struct module *owner = csw->owner;
struct con_driver *con_driver;
const char *desc;
int i, retval = 0;
+ WARN_CONSOLE_UNLOCKED();
+
if (!try_module_get(owner))
return -ENODEV;
- console_lock();
-
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
con_driver = ®istered_con_driver[i];
@@ -3582,10 +3583,29 @@ int register_con_driver(const struct con
}
err:
- console_unlock();
module_put(owner);
return retval;
}
+
+/**
+ * register_con_driver - register console driver to console layer
+ * @csw: console driver
+ * @first: the first console to take over, minimum value is 0
+ * @last: the last console to take over, maximum value is MAX_NR_CONSOLES -1
+ *
+ * DESCRIPTION: This function registers a console driver which can later
+ * bind to a range of consoles specified by @first and @last. It will
+ * also initialize the console driver by calling con_startup().
+ */
+int register_con_driver(const struct consw *csw, int first, int last)
+{
+ int retval;
+
+ console_lock();
+ retval = do_register_con_driver(csw, first, last);
+ console_unlock();
+ return retval;
+}
EXPORT_SYMBOL(register_con_driver);
/**
@@ -3639,17 +3659,44 @@ EXPORT_SYMBOL(unregister_con_driver);
* when a driver wants to take over some existing consoles
* and become default driver for newly opened ones.
*
- * take_over_console is basically a register followed by unbind
+ * take_over_console is basically a register followed by unbind
+ */
+int do_take_over_console(const struct consw *csw, int first, int last, int deflt)
+{
+ int err;
+
+ err = do_register_con_driver(csw, first, last);
+ /*
+ * If we get an busy error we still want to bind the console driver
+ * and return success, as we may have unbound the console driver
+ * but not unregistered it.
+ */
+ if (err == -EBUSY)
+ err = 0;
+ if (!err)
+ do_bind_con_driver(csw, first, last, deflt);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(do_take_over_console);
+
+/*
+ * If we support more console drivers, this function is used
+ * when a driver wants to take over some existing consoles
+ * and become default driver for newly opened ones.
+ *
+ * take_over_console is basically a register followed by unbind
*/
int take_over_console(const struct consw *csw, int first, int last, int deflt)
{
int err;
err = register_con_driver(csw, first, last);
- /* if we get an busy error we still want to bind the console driver
+ /*
+ * If we get an busy error we still want to bind the console driver
* and return success, as we may have unbound the console driver
- * but not unregistered it.
- */
+ * but not unregistered it.
+ */
if (err == -EBUSY)
err = 0;
if (!err)
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -530,6 +530,33 @@ static int search_for_mapped_con(void)
return retval;
}
+static int do_fbcon_takeover(int show_logo)
+{
+ int err, i;
+
+ if (!num_registered_fb)
+ return -ENODEV;
+
+ if (!show_logo)
+ logo_shown = FBCON_LOGO_DONTSHOW;
+
+ for (i = first_fb_vc; i <= last_fb_vc; i++)
+ con2fb_map[i] = info_idx;
+
+ err = do_take_over_console(&fb_con, first_fb_vc, last_fb_vc,
+ fbcon_is_default);
+
+ if (err) {
+ for (i = first_fb_vc; i <= last_fb_vc; i++)
+ con2fb_map[i] = -1;
+ info_idx = -1;
+ } else {
+ fbcon_has_console_bind = 1;
+ }
+
+ return err;
+}
+
static int fbcon_takeover(int show_logo)
{
int err, i;
@@ -3122,7 +3149,7 @@ static int fbcon_fb_registered(struct fb
}
if (info_idx != -1)
- ret = fbcon_takeover(1);
+ ret = do_fbcon_takeover(1);
} else {
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map_boot[i] == idx)
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1628,7 +1628,9 @@ static int do_register_framebuffer(struc
event.info = fb_info;
if (!lock_fb_info(fb_info))
return -ENODEV;
+ console_lock();
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+ console_unlock();
unlock_fb_info(fb_info);
return 0;
}
@@ -1831,11 +1833,8 @@ int fb_new_modelist(struct fb_info *info
err = 1;
if (!list_empty(&info->modelist)) {
- if (!lock_fb_info(info))
- return -ENODEV;
event.info = info;
err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
- unlock_fb_info(info);
}
return err;
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -175,6 +175,8 @@ static ssize_t store_modes(struct device
if (i * sizeof(struct fb_videomode) != count)
return -EINVAL;
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
console_lock();
list_splice(&fb_info->modelist, &old_list);
fb_videomode_to_modelist((const struct fb_videomode *)buf, i,
@@ -186,6 +188,7 @@ static ssize_t store_modes(struct device
fb_destroy_modelist(&old_list);
console_unlock();
+ unlock_fb_info(fb_info);
return 0;
}
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -78,6 +78,7 @@ int con_is_bound(const struct consw *csw
int register_con_driver(const struct consw *csw, int first, int last);
int unregister_con_driver(const struct consw *csw);
int take_over_console(const struct consw *sw, int first, int last, int deflt);
+int do_take_over_console(const struct consw *sw, int first, int last, int deflt);
void give_up_console(const struct consw *sw);
#ifdef CONFIG_HW_CONSOLE
int con_debug_enter(struct vc_data *vc);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 037/153] fb: Yet another band-aid for fixing lockdep mess
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (35 preceding siblings ...)
2013-03-04 3:37 ` [ 036/153] fb: rework locking to fix lock ordering on takeover Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 038/153] p54usb: corrected USB ID for T-Com Sinus 154 data II Ben Hutchings
` (117 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Takashi Iwai, Alan Cox, Florian Tobias Schandinat,
Jiri Kosina, Sedat Dilek, Dave Airlie
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit e93a9a868792ad71cdd09d75e5a02d8067473c4e upstream.
I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver(). After this hack, lockdep
warnings are finally gone.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/tty/vt/vt.c | 43 +++++++++++++++++++++++++++--------------
drivers/video/console/fbcon.c | 4 ++--
drivers/video/fbmem.c | 4 ++++
include/linux/console.h | 1 +
include/linux/vt_kern.h | 2 ++
5 files changed, 37 insertions(+), 17 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3164,6 +3164,18 @@ static int con_is_graphics(const struct
*/
int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
{
+ int retval;
+
+ console_lock();
+ retval = do_unbind_con_driver(csw, first, last, deflt);
+ console_unlock();
+ return retval;
+}
+EXPORT_SYMBOL(unbind_con_driver);
+
+/* unlocked version of unbind_con_driver() */
+int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
+{
struct module *owner = csw->owner;
const struct consw *defcsw = NULL;
struct con_driver *con_driver = NULL, *con_back = NULL;
@@ -3172,7 +3184,7 @@ int unbind_con_driver(const struct consw
if (!try_module_get(owner))
return -ENODEV;
- console_lock();
+ WARN_CONSOLE_UNLOCKED();
/* check if driver is registered and if it is unbindable */
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
@@ -3185,10 +3197,8 @@ int unbind_con_driver(const struct consw
}
}
- if (retval) {
- console_unlock();
+ if (retval)
goto err;
- }
retval = -ENODEV;
@@ -3204,15 +3214,11 @@ int unbind_con_driver(const struct consw
}
}
- if (retval) {
- console_unlock();
+ if (retval)
goto err;
- }
- if (!con_is_bound(csw)) {
- console_unlock();
+ if (!con_is_bound(csw))
goto err;
- }
first = max(first, con_driver->first);
last = min(last, con_driver->last);
@@ -3241,13 +3247,12 @@ int unbind_con_driver(const struct consw
/* ignore return value, binding should not fail */
do_bind_con_driver(defcsw, first, last, deflt);
- console_unlock();
err:
module_put(owner);
return retval;
}
-EXPORT_SYMBOL(unbind_con_driver);
+EXPORT_SYMBOL_GPL(do_unbind_con_driver);
static int vt_bind(struct con_driver *con)
{
@@ -3621,9 +3626,18 @@ EXPORT_SYMBOL(register_con_driver);
*/
int unregister_con_driver(const struct consw *csw)
{
- int i, retval = -ENODEV;
+ int retval;
console_lock();
+ retval = do_unregister_con_driver(csw);
+ console_unlock();
+ return retval;
+}
+EXPORT_SYMBOL(unregister_con_driver);
+
+int do_unregister_con_driver(const struct consw *csw)
+{
+ int i, retval = -ENODEV;
/* cannot unregister a bound driver */
if (con_is_bound(csw))
@@ -3649,10 +3663,9 @@ int unregister_con_driver(const struct c
}
}
err:
- console_unlock();
return retval;
}
-EXPORT_SYMBOL(unregister_con_driver);
+EXPORT_SYMBOL_GPL(do_unregister_con_driver);
/*
* If we support more console drivers, this function is used
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -3011,7 +3011,7 @@ static int fbcon_unbind(void)
{
int ret;
- ret = unbind_con_driver(&fb_con, first_fb_vc, last_fb_vc,
+ ret = do_unbind_con_driver(&fb_con, first_fb_vc, last_fb_vc,
fbcon_is_default);
if (!ret)
@@ -3084,7 +3084,7 @@ static int fbcon_fb_unregistered(struct
primary_device = -1;
if (!num_registered_fb)
- unregister_con_driver(&fb_con);
+ do_unregister_con_driver(&fb_con);
return 0;
}
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1646,8 +1646,10 @@ static int do_unregister_framebuffer(str
if (!lock_fb_info(fb_info))
return -ENODEV;
+ console_lock();
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ console_unlock();
unlock_fb_info(fb_info);
if (ret)
@@ -1662,7 +1664,9 @@ static int do_unregister_framebuffer(str
num_registered_fb--;
fb_cleanup_device(fb_info);
event.info = fb_info;
+ console_lock();
fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
+ console_unlock();
/* this may free fb info */
put_fb_info(fb_info);
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -77,6 +77,7 @@ extern const struct consw prom_con; /* S
int con_is_bound(const struct consw *csw);
int register_con_driver(const struct consw *csw, int first, int last);
int unregister_con_driver(const struct consw *csw);
+int do_unregister_con_driver(const struct consw *csw);
int take_over_console(const struct consw *sw, int first, int last, int deflt);
int do_take_over_console(const struct consw *sw, int first, int last, int deflt);
void give_up_console(const struct consw *sw);
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -132,6 +132,8 @@ void vt_event_post(unsigned int event, u
int vt_waitactive(int n);
void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
+extern int do_unbind_con_driver(const struct consw *csw, int first, int last,
+ int deflt);
extern int unbind_con_driver(const struct consw *csw, int first, int last,
int deflt);
int vty_init(const struct file_operations *console_fops);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 038/153] p54usb: corrected USB ID for T-Com Sinus 154 data II
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (36 preceding siblings ...)
2013-03-04 3:37 ` [ 037/153] fb: Yet another band-aid for fixing lockdep mess Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 039/153] rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_id Ben Hutchings
` (116 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Tomasz Guszkowski, Christian Lamparter, John W. Linville
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomasz Guszkowski <tsg@o2.pl>
commit 008e33f733ca51acb2dd9d88ea878693b04d1d2a upstream.
Corrected USB ID for T-Com Sinus 154 data II. ISL3887-based. The
device was tested in managed mode with no security, WEP 128
bit and WPA-PSK (TKIP) with firmware 2.13.1.0.lm87.arm (md5sum:
7d676323ac60d6e1a3b6d61e8c528248). It works.
Signed-off-by: Tomasz Guszkowski <tsg@o2.pl>
Acked-By: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/p54/p54usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -84,8 +84,8 @@ static struct usb_device_id p54u_table[]
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
- {USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
+ {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
{USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 039/153] rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_id
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (37 preceding siblings ...)
2013-03-04 3:37 ` [ 038/153] p54usb: corrected USB ID for T-Com Sinus 154 data II Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 040/153] rtlwifi: rtl8192cu: Add new USB ID Ben Hutchings
` (115 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Larry Finger, John W. Linville
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <Larry.Finger@lwfinger.net>
commit 957f4aca5fa0db69635271bc4621cc0b65b2d590 upstream.
When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi
BUGS with a NULL pointer dereference because the per-driver configuration
data is not available. The probe function has been restructured as
suggested by Ben Hutchings <bhutchings@solarflare.com>.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context, indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 8 +++++++-
drivers/net/wireless/rtlwifi/usb.c | 5 +++--
drivers/net/wireless/rtlwifi/usb.h | 3 ++-
3 files changed, 12 insertions(+), 4 deletions(-)
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -372,9 +372,15 @@ static struct usb_device_id rtl8192c_usb
MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids);
+static int rtl8192cu_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return rtl_usb_probe(intf, id, &rtl92cu_hal_cfg);
+}
+
static struct usb_driver rtl8192cu_driver = {
.name = "rtl8192cu",
- .probe = rtl_usb_probe,
+ .probe = rtl8192cu_probe,
.disconnect = rtl_usb_disconnect,
.id_table = rtl8192c_usb_ids,
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -894,7 +894,8 @@ static struct rtl_intf_ops rtl_usb_ops =
};
int __devinit rtl_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id,
+ struct rtl_hal_cfg *rtl_hal_cfg)
{
int err;
struct ieee80211_hw *hw = NULL;
@@ -928,7 +929,7 @@ int __devinit rtl_usb_probe(struct usb_i
usb_set_intfdata(intf, hw);
/* init cfg & intf_ops */
rtlpriv->rtlhal.interface = INTF_USB;
- rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_info);
+ rtlpriv->cfg = rtl_hal_cfg;
rtlpriv->intf_ops = &rtl_usb_ops;
rtl_dbgp_flag_init(hw);
/* Init IO handler */
--- a/drivers/net/wireless/rtlwifi/usb.h
+++ b/drivers/net/wireless/rtlwifi/usb.h
@@ -158,7 +158,8 @@ struct rtl_usb_priv {
int __devinit rtl_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id);
+ const struct usb_device_id *id,
+ struct rtl_hal_cfg *rtl92cu_hal_cfg);
void rtl_usb_disconnect(struct usb_interface *intf);
int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
int rtl_usb_resume(struct usb_interface *pusb_intf);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 040/153] rtlwifi: rtl8192cu: Add new USB ID
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (38 preceding siblings ...)
2013-03-04 3:37 ` [ 039/153] rtlwifi: rtl8192cu: Fix NULL dereference BUG when using new_id Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 041/153] USB: storage: properly handle the endian issues of idProduct Ben Hutchings
` (114 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Larry Finger, John W. Linville
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <Larry.Finger@lwfinger.net>
commit 8708aac79e4572ba673d7a21e94ddca9f3abb7fc upstream.
A new model of the RTL8188CUS has appeared.
Reported-and-tested-by: Thomas Rosenkrantz <tom.rosary@googlemail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -295,6 +295,7 @@ static struct usb_device_id rtl8192c_usb
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)},
/* RTL8188CUS-VL */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x818a, rtl92cu_hal_cfg)},
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x819a, rtl92cu_hal_cfg)},
/* 8188 Combo for BC4 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 041/153] USB: storage: properly handle the endian issues of idProduct
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (39 preceding siblings ...)
2013-03-04 3:37 ` [ 040/153] rtlwifi: rtl8192cu: Add new USB ID Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 042/153] x86/apic: Use x2apic physical mode based on FADT setting Ben Hutchings
` (113 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, fangxiaozhi, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: fangxiaozhi <huananhu@huawei.com>
commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream.
1. The idProduct is little endian, so make sure its value to be
compatible with the current CPU. Make no break on big endian processors.
Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/storage/initializers.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -147,7 +147,7 @@ static int usb_stor_huawei_dongles_pid(s
int idProduct;
idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = us->pusb_dev->descriptor.idProduct;
+ idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
/* The first port is CDROM,
* means the dongle in the single port mode,
* and a switch command is required to be sent. */
@@ -169,7 +169,7 @@ int usb_stor_huawei_init(struct us_data
int result = 0;
if (usb_stor_huawei_dongles_pid(us)) {
- if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+ if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
result = usb_stor_huawei_scsi_init(us);
else
result = usb_stor_huawei_feature_init(us);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 042/153] x86/apic: Use x2apic physical mode based on FADT setting
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (40 preceding siblings ...)
2013-03-04 3:37 ` [ 041/153] USB: storage: properly handle the endian issues of idProduct Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 043/153] x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems Ben Hutchings
` (112 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Greg Pearson, Suresh Siddha, Ingo Molnar
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Pearson <greg.pearson@hp.com>
commit ea0dcf903e7d76aa5d483d876215fedcfdfe140f upstream.
Provide systems that do not support x2apic cluster mode
a mechanism to select x2apic physical mode using the
FADT FORCE_APIC_PHYSICAL_DESTINATION_MODE bit.
Changes from v1: (based on Suresh's comments)
- removed #ifdef CONFIG_ACPI
- removed #include <linux/acpi.h>
Signed-off-by: Greg Pearson <greg.pearson@hp.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1335313436-32020-1-git-send-email-greg.pearson@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/kernel/apic/x2apic_phys.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -24,6 +24,12 @@ static int x2apic_acpi_madt_oem_check(ch
{
if (x2apic_phys)
return x2apic_enabled();
+ else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+ (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
+ x2apic_enabled()) {
+ printk(KERN_DEBUG "System requires x2apic physical mode\n");
+ return 1;
+ }
else
return 0;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 043/153] x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (41 preceding siblings ...)
2013-03-04 3:37 ` [ 042/153] x86/apic: Use x2apic physical mode based on FADT setting Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 044/153] ALSA: rme32.c irq enabling after spin_lock_irq Ben Hutchings
` (111 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Stoney Wang, Yinghai Lu, Ingo Molnar
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stoney Wang <song-bo.wang@hp.com>
commit cb214ede7657db458fd0b2a25ea0b28dbf900ebc upstream.
When a HP ProLiant DL980 G7 Server boots a regular kernel,
there will be intermittent lost interrupts which could
result in a hang or (in extreme cases) data loss.
The reason is that this system only supports x2apic physical
mode, while the kernel boots with a logical-cluster default
setting.
This bug can be worked around by specifying the "x2apic_phys" or
"nox2apic" boot option, but we want to handle this system
without requiring manual workarounds.
The BIOS sets ACPI_FADT_APIC_PHYSICAL in FADT table.
As all apicids are smaller than 255, BIOS need to pass the
control to the OS with xapic mode, according to x2apic-spec,
chapter 2.9.
Current code handle x2apic when BIOS pass with xapic mode
enabled:
When user specifies x2apic_phys, or FADT indicates PHYSICAL:
1. During madt oem check, apic driver is set with xapic logical
or xapic phys driver at first.
2. enable_IR_x2apic() will enable x2apic_mode.
3. if user specifies x2apic_phys on the boot line, x2apic_phys_probe()
will install the correct x2apic phys driver and use x2apic phys mode.
Otherwise it will skip the driver will let x2apic_cluster_probe to
take over to install x2apic cluster driver (wrong one) even though FADT
indicates PHYSICAL, because x2apic_phys_probe does not check
FADT PHYSICAL.
Add checking x2apic_fadt_phys in x2apic_phys_probe() to fix the
problem.
Signed-off-by: Stoney Wang <song-bo.wang@hp.com>
[ updated the changelog and simplified the code ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1360263182-16226-1-git-send-email-yinghai@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/kernel/apic/x2apic_phys.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -20,18 +20,19 @@ static int set_x2apic_phys_mode(char *ar
}
early_param("x2apic_phys", set_x2apic_phys_mode);
-static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static bool x2apic_fadt_phys(void)
{
- if (x2apic_phys)
- return x2apic_enabled();
- else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
- (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
- x2apic_enabled()) {
+ if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+ (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "System requires x2apic physical mode\n");
- return 1;
+ return true;
}
- else
- return 0;
+ return false;
+}
+
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
}
static void
@@ -114,7 +115,7 @@ static void init_x2apic_ldr(void)
static int x2apic_phys_probe(void)
{
- if (x2apic_mode && x2apic_phys)
+ if (x2apic_mode && (x2apic_phys || x2apic_fadt_phys()))
return 1;
return apic == &apic_x2apic_phys;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 044/153] ALSA: rme32.c irq enabling after spin_lock_irq
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (42 preceding siblings ...)
2013-03-04 3:37 ` [ 043/153] x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 045/153] ALSA: ali5451: remove irq enabling in pointer callback Ben Hutchings
` (110 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Denis Efremov, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Denis Efremov <yefremov.denis@gmail.com>
commit f49a59c4471d81a233e09dda45187cc44fda009d upstream.
According to the other code in this driver and similar
code in rme96 it seems, that spin_lock_irq in
snd_rme32_capture_close function should be paired
with spin_unlock_irq.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/pci/rme32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -1017,7 +1017,7 @@ static int snd_rme32_capture_close(struc
spin_lock_irq(&rme32->lock);
rme32->capture_substream = NULL;
rme32->capture_periodsize = 0;
- spin_unlock(&rme32->lock);
+ spin_unlock_irq(&rme32->lock);
return 0;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 045/153] ALSA: ali5451: remove irq enabling in pointer callback
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (43 preceding siblings ...)
2013-03-04 3:37 ` [ 044/153] ALSA: rme32.c irq enabling after spin_lock_irq Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 046/153] drivers/rtc/rtc-pl031.c: restore ST variant functionality Ben Hutchings
` (109 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Denis Efremov, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Denis Efremov <yefremov.denis@gmail.com>
commit dacae5a19b4cbe1b5e3a86de23ea74cbe9ec9652 upstream.
snd_ali_pointer function is called with local
interrupts disabled. However it seems very strange to
reenable them in such way.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/pci/ali5451/ali5451.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -1435,7 +1435,7 @@ static snd_pcm_uframes_t snd_ali_pointer
spin_lock(&codec->reg_lock);
if (!pvoice->running) {
- spin_unlock_irq(&codec->reg_lock);
+ spin_unlock(&codec->reg_lock);
return 0;
}
outb(pvoice->number, ALI_REG(codec, ALI_GC_CIR));
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 046/153] drivers/rtc/rtc-pl031.c: restore ST variant functionality
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (44 preceding siblings ...)
2013-03-04 3:37 ` [ 045/153] ALSA: ali5451: remove irq enabling in pointer callback Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 047/153] x86: Hyper-V: register clocksource only if its advertised Ben Hutchings
` (108 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Linus Walleij, Haojian Zhuang, Mian Yousaf KAUKAB,
Srinidhi Kasagar, Alessandro Zummo, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <linus.walleij@linaro.org>
commit 3399cfb5df9594495b876d1843a7165f77366b2b upstream.
Commit e7e034e18a0a ("drivers/rtc/rtc-pl031.c: fix the missing operation
on enable") accidentally broke the ST variants of PL031.
The bit that is being poked as "clockwatch" enable bit for the ST
variants does the work of bit 0 on this variant. Bit 0 is used for a
clock divider on the ST variants, and setting it to 1 will affect
timekeeping in a very bad way.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/rtc/rtc-pl031.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -344,7 +344,9 @@ static int pl031_probe(struct amba_devic
/* Enable the clockwatch on ST Variants */
if (ldata->hw_designer == AMBA_VENDOR_ST)
data |= RTC_CR_CWEN;
- writel(data | RTC_CR_EN, ldata->base + RTC_CR);
+ else
+ data |= RTC_CR_EN;
+ writel(data, ldata->base + RTC_CR);
/*
* On ST PL031 variants, the RTC reset value does not provide correct
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 047/153] x86: Hyper-V: register clocksource only if its advertised
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (45 preceding siblings ...)
2013-03-04 3:37 ` [ 046/153] drivers/rtc/rtc-pl031.c: restore ST variant functionality Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 048/153] x86/mm: Check if PUD is large when validating a kernel address Ben Hutchings
` (107 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Olaf Hering, K. Y. Srinivasan, Greg KH, H. Peter Anvin
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Olaf Hering <[mailto:olaf@aepfle.de]>
commit 32068f6527b8f1822a30671dedaf59c567325026 upstream.
Enable hyperv_clocksource only if its advertised as a feature.
XenServer 6 returns the signature which is checked in
ms_hyperv_platform(), but it does not offer all features. Currently the
clocksource is enabled unconditionally in ms_hyperv_init_platform(), and
the result is a hanging guest.
Hyper-V spec Bit 1 indicates the availability of Partition Reference
Counter. Register the clocksource only if this bit is set.
The guest in question prints this in dmesg:
[ 0.000000] Hypervisor detected: Microsoft HyperV
[ 0.000000] HyperV: features 0x70, hints 0x0
This bug can be reproduced easily be setting 'viridian=1' in a HVM domU
.cfg file. A workaround without this patch is to boot the HVM guest with
'clocksource=jiffies'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: http://lkml.kernel.org/r/1359940959-32168-1-git-send-email-kys@microsoft.com
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/kernel/cpu/mshyperv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -68,7 +68,8 @@ static void __init ms_hyperv_init_platfo
printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
- clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
+ if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
+ clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 048/153] x86/mm: Check if PUD is large when validating a kernel address
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (46 preceding siblings ...)
2013-03-04 3:37 ` [ 047/153] x86: Hyper-V: register clocksource only if its advertised Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 049/153] Revert "drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S" Ben Hutchings
` (106 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Mel Gorman, Rik van Riel, Michal Hocko, Johannes Weiner,
Ingo Molnar
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mel Gorman <mgorman@suse.de>
commit 0ee364eb316348ddf3e0dfcd986f5f13f528f821 upstream.
A user reported the following oops when a backup process reads
/proc/kcore:
BUG: unable to handle kernel paging request at ffffbb00ff33b000
IP: [<ffffffff8103157e>] kern_addr_valid+0xbe/0x110
[...]
Call Trace:
[<ffffffff811b8aaa>] read_kcore+0x17a/0x370
[<ffffffff811ad847>] proc_reg_read+0x77/0xc0
[<ffffffff81151687>] vfs_read+0xc7/0x130
[<ffffffff811517f3>] sys_read+0x53/0xa0
[<ffffffff81449692>] system_call_fastpath+0x16/0x1b
Investigation determined that the bug triggered when reading
system RAM at the 4G mark. On this system, that was the first
address using 1G pages for the virt->phys direct mapping so the
PUD is pointing to a physical address, not a PMD page.
The problem is that the page table walker in kern_addr_valid() is
not checking pud_large() and treats the physical address as if
it was a PMD. If it happens to look like pmd_none then it'll
silently fail, probably returning zeros instead of real data. If
the data happens to look like a present PMD though, it will be
walked resulting in the oops above.
This patch adds the necessary pud_large() check.
Unfortunately the problem was not readily reproducible and now
they are running the backup program without accessing
/proc/kcore so the patch has not been validated but I think it
makes sense.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.coM>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20130211145236.GX21389@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/include/asm/pgtable.h | 5 +++++
arch/x86/mm/init_64.c | 3 +++
2 files changed, 8 insertions(+)
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -142,6 +142,11 @@ static inline unsigned long pmd_pfn(pmd_
return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
+static inline unsigned long pud_pfn(pud_t pud)
+{
+ return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
static inline int pmd_large(pmd_t pte)
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -831,6 +831,9 @@ int kern_addr_valid(unsigned long addr)
if (pud_none(*pud))
return 0;
+ if (pud_large(*pud))
+ return pfn_valid(pud_pfn(*pud));
+
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return 0;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 049/153] Revert "drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S"
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (47 preceding siblings ...)
2013-03-04 3:37 ` [ 048/153] x86/mm: Check if PUD is large when validating a kernel address Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 050/153] USB: option: add Yota / Megafon M100-1 4g modem Ben Hutchings
` (105 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Daniel Vetter, Dave Airlie
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vetter <daniel.vetter@ffwll.ch>
commit db3985e5ca8f50fc17606855ba394783d11683a5 upstream.
This reverts commit 6f33814bd4d9cfe76033a31b1c0c76c960cd8e4b.
The quirk cause a regression, and it looks like the original bug was
simply a lack of FIFO bandwidth on the i915G of the reporter. Which
should eventually be fixed as soon as we get around to implemented
DSPARB FIFO reassignment on gen 3.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/drm_edid.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -87,9 +87,6 @@ static struct edid_quirk {
int product_id;
u32 quirks;
} edid_quirk_list[] = {
- /* ASUS VW222S */
- { "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING },
-
/* Acer AL1706 */
{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
/* Acer F51 */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 050/153] USB: option: add Yota / Megafon M100-1 4g modem
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (48 preceding siblings ...)
2013-03-04 3:37 ` [ 049/153] Revert "drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S" Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 051/153] USB: serial: fix null-pointer dereferences on disconnect Ben Hutchings
` (104 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Bjørn Mork, Greg Kroah-Hartman
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2361 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <bjorn@mork.no>
commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream.
Interface layout:
00 CD-ROM
01 debug COM port
02 AP control port
03 modem
04 usb-ethernet
Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0408 ProdID=ea42 Rev= 0.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=Qualcomm CDMA Technologies MSM
S: SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -576,6 +576,8 @@ static const struct usb_device_id option
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 051/153] USB: serial: fix null-pointer dereferences on disconnect
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (49 preceding siblings ...)
2013-03-04 3:37 ` [ 050/153] USB: option: add Yota / Megafon M100-1 4g modem Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 3:37 ` [ 052/153] idr: idr_for_each_entry() macro Ben Hutchings
` (103 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Johan Hovold, Chris Ruehl, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <jhovold@gmail.com>
commit b2ca699076573c94fee9a73cb0d8645383b602a0 upstream.
Make sure serial-driver dtr_rts is called with disc_mutex held after
checking the disconnected flag.
Due to a bug in the tty layer, dtr_rts may get called after a device has
been disconnected and the tty-device unregistered. Some drivers have had
individual checks for disconnect to make sure the disconnected interface
was not accessed, but this should really be handled in usb-serial core
(at least until the long-standing tty-bug has been fixed).
Note that the problem has been made more acute with commit 0998d0631001
("device-core: Ensure drvdata = NULL when no driver is bound") as the
port data is now also NULL when dtr_rts is called resulting in further
oopses.
Reported-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
- Adjust context
- Drop changes to quatech2.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1916,24 +1916,22 @@ static void ftdi_dtr_rts(struct usb_seri
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected) {
- /* Disable flow control */
- if (!on && usb_control_msg(port->serial->dev,
+ /* Disable flow control */
+ if (!on) {
+ if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface, NULL, 0,
WDR_TIMEOUT) < 0) {
- dev_err(&port->dev, "error from flowcontrol urb\n");
+ dev_err(&port->dev, "error from flowcontrol urb\n");
}
- /* drop RTS and DTR */
- if (on)
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- else
- clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
- mutex_unlock(&port->serial->disc_mutex);
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/*
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -558,19 +558,15 @@ static void mct_u232_dtr_rts(struct usb_
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected) {
- /* drop DTR and RTS */
- spin_lock_irq(&priv->lock);
- if (on)
- priv->control_state |= TIOCM_DTR | TIOCM_RTS;
- else
- priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- control_state = priv->control_state;
- spin_unlock_irq(&priv->lock);
- mct_u232_set_modem_ctrl(port->serial, control_state);
- }
- mutex_unlock(&port->serial->disc_mutex);
+ spin_lock_irq(&priv->lock);
+ if (on)
+ priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+ else
+ priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ control_state = priv->control_state;
+ spin_unlock_irq(&priv->lock);
+
+ mct_u232_set_modem_ctrl(port->serial, control_state);
}
static void mct_u232_close(struct usb_serial_port *port)
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -891,19 +891,13 @@ static int sierra_open(struct tty_struct
static void sierra_dtr_rts(struct usb_serial_port *port, int on)
{
- struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
portdata = usb_get_serial_port_data(port);
portdata->rts_state = on;
portdata->dtr_state = on;
- if (serial->dev) {
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- sierra_send_setup(port);
- mutex_unlock(&serial->disc_mutex);
- }
+ sierra_send_setup(port);
}
static int sierra_startup(struct usb_serial *serial)
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -533,19 +533,16 @@ static void ssu100_dtr_rts(struct usb_se
dbg("%s\n", __func__);
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected) {
- /* Disable flow control */
- if (!on &&
- ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
+ /* Disable flow control */
+ if (!on) {
+ if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
dev_err(&port->dev, "error from flowcontrol urb\n");
- /* drop RTS and DTR */
- if (on)
- set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
- else
- clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
}
- mutex_unlock(&port->serial->disc_mutex);
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
}
static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -697,9 +697,20 @@ static int serial_carrier_raised(struct
static void serial_dtr_rts(struct tty_port *port, int on)
{
struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
- struct usb_serial_driver *drv = p->serial->type;
- if (drv->dtr_rts)
+ struct usb_serial *serial = p->serial;
+ struct usb_serial_driver *drv = serial->type;
+
+ if (!drv->dtr_rts)
+ return;
+ /*
+ * Work-around bug in the tty-layer which can result in dtr_rts
+ * being called after a disconnect (and tty_unregister_device
+ * has returned). Remove once bug has been squashed.
+ */
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
drv->dtr_rts(p, on);
+ mutex_unlock(&serial->disc_mutex);
}
static const struct tty_port_operations serial_port_ops = {
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -41,7 +41,6 @@ static int debug;
void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
{
- struct usb_serial *serial = port->serial;
struct usb_wwan_port_private *portdata;
struct usb_wwan_intf_private *intfdata;
@@ -54,12 +53,11 @@ void usb_wwan_dtr_rts(struct usb_serial_
return;
portdata = usb_get_serial_port_data(port);
- mutex_lock(&serial->disc_mutex);
+ /* FIXME: locking */
portdata->rts_state = on;
portdata->dtr_state = on;
- if (serial->dev)
- intfdata->send_setup(port);
- mutex_unlock(&serial->disc_mutex);
+
+ intfdata->send_setup(port);
}
EXPORT_SYMBOL(usb_wwan_dtr_rts);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 052/153] idr: idr_for_each_entry() macro
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (50 preceding siblings ...)
2013-03-04 3:37 ` [ 051/153] USB: serial: fix null-pointer dereferences on disconnect Ben Hutchings
@ 2013-03-04 3:37 ` Ben Hutchings
2013-03-04 4:56 ` Ben Hutchings
2013-03-04 3:38 ` [ 053/153] pps: Add pps_lookup_dev() function Ben Hutchings
` (102 subsequent siblings)
154 siblings, 1 reply; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:37 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Philipp Reisner
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Reisner <philipp.reisner@linbit.com>
commit 9749f30f1a387070e6e8351f35aeb829eacc3ab6 upstream.
Inspired by the list_for_each_entry() macro
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/linux/idr.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 255491c..52a9da2 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -152,4 +152,15 @@ void ida_simple_remove(struct ida *ida, unsigned int id);
void __init idr_init_cache(void);
+/**
+ * idr_for_each_entry - iterate over an idr's elements of a given type
+ * @idp: idr handle
+ * @entry: the type * to use as cursor
+ * @id: id entry's key
+ */
+#define idr_for_each_entry(idp, entry, id) \
+ for (id = 0, entry = (typeof(entry))idr_get_next((idp), &(id)); \
+ entry != NULL; \
+ ++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
+
#endif /* __IDR_H__ */
^ permalink raw reply related [flat|nested] 172+ messages in thread* Re: [ 052/153] idr: idr_for_each_entry() macro
2013-03-04 3:37 ` [ 052/153] idr: idr_for_each_entry() macro Ben Hutchings
@ 2013-03-04 4:56 ` Ben Hutchings
2013-03-04 21:05 ` Philipp Reisner
0 siblings, 1 reply; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 4:56 UTC (permalink / raw)
To: Philipp Reisner; +Cc: stable, akpm, LKML
[-- Attachment #1: Type: text/plain, Size: 1769 bytes --]
On Mon, 2013-03-04 at 03:37 +0000, Ben Hutchings wrote:
> 3.2-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Philipp Reisner <philipp.reisner@linbit.com>
>
> commit 9749f30f1a387070e6e8351f35aeb829eacc3ab6 upstream.
>
> Inspired by the list_for_each_entry() macro
>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Philipp, please can I have an explicit Signed-off-by from you? It was
missing in mainline though this change appeared in a long series of drbd
changes with proper Signed-off-by lines.
Ben.
> ---
> include/linux/idr.h | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/include/linux/idr.h b/include/linux/idr.h
> index 255491c..52a9da2 100644
> --- a/include/linux/idr.h
> +++ b/include/linux/idr.h
> @@ -152,4 +152,15 @@ void ida_simple_remove(struct ida *ida, unsigned int id);
>
> void __init idr_init_cache(void);
>
> +/**
> + * idr_for_each_entry - iterate over an idr's elements of a given type
> + * @idp: idr handle
> + * @entry: the type * to use as cursor
> + * @id: id entry's key
> + */
> +#define idr_for_each_entry(idp, entry, id) \
> + for (id = 0, entry = (typeof(entry))idr_get_next((idp), &(id)); \
> + entry != NULL; \
> + ++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
> +
> #endif /* __IDR_H__ */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread
* Re: [ 052/153] idr: idr_for_each_entry() macro
2013-03-04 4:56 ` Ben Hutchings
@ 2013-03-04 21:05 ` Philipp Reisner
2013-03-05 5:24 ` Ben Hutchings
0 siblings, 1 reply; 172+ messages in thread
From: Philipp Reisner @ 2013-03-04 21:05 UTC (permalink / raw)
To: Ben Hutchings; +Cc: stable, akpm, LKML
Sure, here it is:
----------
From: Philipp Reisner <philipp.reisner@linbit.com>
commit 9749f30f1a387070e6e8351f35aeb829eacc3ab6 upstream.
Inspired by the list_for_each_entry() macro
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
---
include/linux/idr.h | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 255491c..52a9da2 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -152,4 +152,15 @@ void ida_simple_remove(struct ida *ida, unsigned int id);
void __init idr_init_cache(void);
+/**
+ * idr_for_each_entry - iterate over an idr's elements of a given type
+ * @idp: idr handle
+ * @entry: the type * to use as cursor
+ * @id: id entry's key
+ */
+#define idr_for_each_entry(idp, entry, id) \
+ for (id = 0, entry = (typeof(entry))idr_get_next((idp), &(id)); \
+ entry != NULL; \
+ ++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
+
#endif /* __IDR_H__ */
^ permalink raw reply related [flat|nested] 172+ messages in thread
* Re: [ 052/153] idr: idr_for_each_entry() macro
2013-03-04 21:05 ` Philipp Reisner
@ 2013-03-05 5:24 ` Ben Hutchings
0 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-05 5:24 UTC (permalink / raw)
To: Philipp Reisner; +Cc: stable, akpm, LKML
[-- Attachment #1: Type: text/plain, Size: 1422 bytes --]
On Mon, 2013-03-04 at 22:05 +0100, Philipp Reisner wrote:
> Sure, here it is:
> ----------
>
> From: Philipp Reisner <philipp.reisner@linbit.com>
>
> commit 9749f30f1a387070e6e8351f35aeb829eacc3ab6 upstream.
>
> Inspired by the list_for_each_entry() macro
>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Thanks.
Ben.
> ---
> include/linux/idr.h | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/include/linux/idr.h b/include/linux/idr.h
> index 255491c..52a9da2 100644
> --- a/include/linux/idr.h
> +++ b/include/linux/idr.h
> @@ -152,4 +152,15 @@ void ida_simple_remove(struct ida *ida, unsigned int id);
>
> void __init idr_init_cache(void);
>
> +/**
> + * idr_for_each_entry - iterate over an idr's elements of a given type
> + * @idp: idr handle
> + * @entry: the type * to use as cursor
> + * @id: id entry's key
> + */
> +#define idr_for_each_entry(idp, entry, id) \
> + for (id = 0, entry = (typeof(entry))idr_get_next((idp), &(id)); \
> + entry != NULL; \
> + ++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
> +
> #endif /* __IDR_H__ */
>
>
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread
* [ 053/153] pps: Add pps_lookup_dev() function
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (51 preceding siblings ...)
2013-03-04 3:37 ` [ 052/153] idr: idr_for_each_entry() macro Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 054/153] pps: Use pps_lookup_dev to reduce ldisc coupling Ben Hutchings
` (101 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, George Spelvin, Rodolfo Giometti, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: George Spelvin <linux@horizon.com>
commit 513b032c98b4b9414aa4e9b4a315cb1bf0380101 upstream.
The PPS serial line discipline wants to attach a PPS device to a tty
without changing the tty code to add a struct pps_device * pointer.
Since the number of PPS devices in a typical system is generally very low
(n=1 is by far the most common), it's practical to search the entire list
of allocated pps devices. (We capture the timestamp before the lookup,
so the timing isn't affected.)
It is a bit ugly that this function, which is part of the in-kernel
PPS API, has to be in pps.c as opposed to kapi,c, but that's not
something that affects users.
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/pps/pps.c | 33 +++++++++++++++++++++++++++++++++
include/linux/pps_kernel.h | 17 ++++++++++++++---
2 files changed, 47 insertions(+), 3 deletions(-)
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -350,11 +350,44 @@ free_idr:
void pps_unregister_cdev(struct pps_device *pps)
{
+ pps->lookup_cookie = NULL;
device_destroy(pps_class, pps->dev->devt);
cdev_del(&pps->cdev);
}
/*
+ * Look up a pps device by magic cookie.
+ * The cookie is usually a pointer to some enclosing device, but this
+ * code doesn't care; you should never be dereferencing it.
+ *
+ * This is a bit of a kludge that is currently used only by the PPS
+ * serial line discipline. It may need to be tweaked when a second user
+ * is found.
+ *
+ * There is no function interface for setting the lookup_cookie field.
+ * It's initialized to NULL when the pps device is created, and if a
+ * client wants to use it, just fill it in afterward.
+ *
+ * The cookie is automatically set to NULL in pps_unregister_source()
+ * so that it will not be used again, even if the pps device cannot
+ * be removed from the idr due to pending references holding the minor
+ * number in use.
+ */
+struct pps_device *pps_lookup_dev(void const *cookie)
+{
+ struct pps_device *pps;
+ unsigned id;
+
+ rcu_read_lock();
+ idr_for_each_entry(&pps_idr, pps, id)
+ if (cookie == pps->lookup_cookie)
+ break;
+ rcu_read_unlock();
+ return pps;
+}
+EXPORT_SYMBOL(pps_lookup_dev);
+
+/*
* Module stuff
*/
--- a/include/linux/pps_kernel.h
+++ b/include/linux/pps_kernel.h
@@ -43,7 +43,7 @@ struct pps_source_info {
int event, void *data); /* PPS echo function */
struct module *owner;
- struct device *dev;
+ struct device *dev; /* Parent device for device_create */
};
struct pps_event_time {
@@ -69,6 +69,7 @@ struct pps_device {
wait_queue_head_t queue; /* PPS event queue */
unsigned int id; /* PPS source unique ID */
+ void const *lookup_cookie; /* pps_lookup_dev only */
struct cdev cdev;
struct device *dev;
struct fasync_struct *async_queue; /* fasync method */
@@ -82,16 +83,26 @@ struct pps_device {
extern struct device_attribute pps_attrs[];
/*
+ * Internal functions.
+ *
+ * These are not actually part of the exported API, but this is a
+ * convenient header file to put them in.
+ */
+
+extern int pps_register_cdev(struct pps_device *pps);
+extern void pps_unregister_cdev(struct pps_device *pps);
+
+/*
* Exported functions
*/
extern struct pps_device *pps_register_source(
struct pps_source_info *info, int default_params);
extern void pps_unregister_source(struct pps_device *pps);
-extern int pps_register_cdev(struct pps_device *pps);
-extern void pps_unregister_cdev(struct pps_device *pps);
extern void pps_event(struct pps_device *pps,
struct pps_event_time *ts, int event, void *data);
+/* Look up a pps device by magic cookie */
+struct pps_device *pps_lookup_dev(void const *cookie);
static inline void timespec_to_pps_ktime(struct pps_ktime *kt,
struct timespec ts)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 054/153] pps: Use pps_lookup_dev to reduce ldisc coupling
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (52 preceding siblings ...)
2013-03-04 3:38 ` [ 053/153] pps: Add pps_lookup_dev() function Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 055/153] pps: Fix a use-after free bug when unregistering a source Ben Hutchings
` (100 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, George Spelvin, Rodolfo Giometti, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: George Spelvin <linux@horizon.com>
commit 03a7ffe4e542310838bac70ef85acc17536b6d7c upstream.
Now that N_TTY uses tty->disc_data for its private data,
'subclass' ldiscs cannot use ->disc_data for their own private data.
(This is a regression is v3.8-rc1)
Use pps_lookup_dev to associate the tty with the pps source instead.
This fixes a crashing regression in 3.8-rc1.
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/pps/clients/pps-ldisc.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/drivers/pps/clients/pps-ldisc.c
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -31,7 +31,7 @@
static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status,
struct pps_event_time *ts)
{
- struct pps_device *pps = (struct pps_device *)tty->disc_data;
+ struct pps_device *pps = pps_lookup_dev(tty);
BUG_ON(pps == NULL);
@@ -67,9 +67,9 @@ static int pps_tty_open(struct tty_struc
pr_err("cannot register PPS source \"%s\"\n", info.path);
return -ENOMEM;
}
- tty->disc_data = pps;
+ pps->lookup_cookie = tty;
- /* Should open N_TTY ldisc too */
+ /* Now open the base class N_TTY ldisc */
ret = alias_n_tty_open(tty);
if (ret < 0) {
pr_err("cannot open tty ldisc \"%s\"\n", info.path);
@@ -81,7 +81,6 @@ static int pps_tty_open(struct tty_struc
return 0;
err_unregister:
- tty->disc_data = NULL;
pps_unregister_source(pps);
return ret;
}
@@ -90,11 +89,10 @@ static void (*alias_n_tty_close)(struct
static void pps_tty_close(struct tty_struct *tty)
{
- struct pps_device *pps = (struct pps_device *)tty->disc_data;
+ struct pps_device *pps = pps_lookup_dev(tty);
alias_n_tty_close(tty);
- tty->disc_data = NULL;
dev_info(pps->dev, "removed\n");
pps_unregister_source(pps);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 055/153] pps: Fix a use-after free bug when unregistering a source.
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (53 preceding siblings ...)
2013-03-04 3:38 ` [ 054/153] pps: Use pps_lookup_dev to reduce ldisc coupling Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 056/153] PCI/PM: Clean up PME state when removing a device Ben Hutchings
` (99 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, George Spelvin, Rodolfo Giometti, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: George Spelvin <linux@horizon.com>
commit d953e0e837e65ecc1ddaa4f9560f7925878a0de6 upstream.
Remove the cdev from the system (with cdev_del) *before* deallocating it
(in pps_device_destruct, called via kobject_put from device_destroy).
Also prevent deallocating a device with open file handles.
A better long-term fix is probably to remove the cdev from the pps_device
entirely, and instead have all devices reference one global cdev. Then
the deallocation ordering becomes simpler.
But that's more complex and invasive change, so we leave that
for later.
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/pps/pps.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -247,12 +247,15 @@ static int pps_cdev_open(struct inode *i
struct pps_device *pps = container_of(inode->i_cdev,
struct pps_device, cdev);
file->private_data = pps;
-
+ kobject_get(&pps->dev->kobj);
return 0;
}
static int pps_cdev_release(struct inode *inode, struct file *file)
{
+ struct pps_device *pps = container_of(inode->i_cdev,
+ struct pps_device, cdev);
+ kobject_put(&pps->dev->kobj);
return 0;
}
@@ -274,8 +277,10 @@ static void pps_device_destruct(struct d
{
struct pps_device *pps = dev_get_drvdata(dev);
- /* release id here to protect others from using it while it's
- * still in use */
+ cdev_del(&pps->cdev);
+
+ /* Now we can release the ID for re-use */
+ pr_debug("deallocating pps%d\n", pps->id);
mutex_lock(&pps_idr_lock);
idr_remove(&pps_idr, pps->id);
mutex_unlock(&pps_idr_lock);
@@ -330,6 +335,7 @@ int pps_register_cdev(struct pps_device
if (IS_ERR(pps->dev))
goto del_cdev;
+ /* Override the release function with our own */
pps->dev->release = pps_device_destruct;
pr_debug("source %s got cdev (%d:%d)\n", pps->info.name,
@@ -350,9 +356,9 @@ free_idr:
void pps_unregister_cdev(struct pps_device *pps)
{
+ pr_debug("unregistering pps%d\n", pps->id);
pps->lookup_cookie = NULL;
device_destroy(pps_class, pps->dev->devt);
- cdev_del(&pps->cdev);
}
/*
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 056/153] PCI/PM: Clean up PME state when removing a device
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (54 preceding siblings ...)
2013-03-04 3:38 ` [ 055/153] pps: Fix a use-after free bug when unregistering a source Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 057/153] USB: option: add Huawei "ACM" devices using protocol = vendor Ben Hutchings
` (98 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Rafael J. Wysocki, Rafael J. Wysocki, Bjorn Helgaas
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rafael J. Wysocki" <rjw@sisk.pl>
commit 249bfb83cf8ba658955f0245ac3981d941f746ee upstream.
Devices are added to pci_pme_list when drivers use pci_enable_wake()
or pci_wake_from_d3(), but they aren't removed from the list unless
the driver explicitly disables wakeup. Many drivers never disable
wakeup, so their devices remain on the list even after they are
removed, e.g., via hotplug. A subsequent PME poll will oops when
it tries to touch the device.
This patch disables PME# on a device before removing it, which removes
the device from pci_pme_list. This is safe even if the device never
had PME# enabled.
This oops can be triggered by unplugging a Thunderbolt ethernet adapter
on a Macbook Pro, as reported by Daniel below.
[bhelgaas: changelog]
Reference: http://lkml.kernel.org/r/CAMVG2svG21yiM1wkH4_2pen2n+cr2-Zv7TbH3Gj+8MwevZjDbw@mail.gmail.com
Reported-and-tested-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/pci/remove.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -19,6 +19,8 @@ static void pci_free_resources(struct pc
static void pci_stop_dev(struct pci_dev *dev)
{
+ pci_pme_active(dev, false);
+
if (dev->is_added) {
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 057/153] USB: option: add Huawei "ACM" devices using protocol = vendor
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (55 preceding siblings ...)
2013-03-04 3:38 ` [ 056/153] PCI/PM: Clean up PME state when removing a device Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 058/153] efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter Ben Hutchings
` (97 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Bjørn Mork, Greg Kroah-Hartman
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2405 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <bjorn@mork.no>
commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream.
The USB device descriptor of one identity presented by a few
Huawei morphing devices have serial functions with class codes
02/02/ff, indicating CDC ACM with a vendor specific protocol. This
combination is often used for MSFT RNDIS functions, and the CDC
ACM class driver will therefore ignore such functions.
The CDC ACM class driver cannot support functions with only 2
endpoints. The underlying serial functions of these modems are
also believed to be the same as for alternate device identities
already supported by the option driver. Letting the same driver
handle these functions independently of the current identity
ensures consistent handling and user experience.
There is no need to blacklist these devices in the rndis_host
driver. Huawei serial functions will either have only 2 endpoints
or a CDC ACM functional descriptor with bmCapabilities != 0, making
them correctly ignored as "non RNDIS" by that driver.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -578,8 +578,12 @@ static const struct usb_device_id option
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 058/153] efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (56 preceding siblings ...)
2013-03-04 3:38 ` [ 057/153] USB: option: add Huawei "ACM" devices using protocol = vendor Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 059/153] ARM: samsung: fix assembly syntax for new gas Ben Hutchings
` (96 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Satoru Takeuchi, Matt Fleming, H. Peter Anvin
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
commit 1de63d60cd5b0d33a812efa455d5933bf1564a51 upstream.
There was a serious problem in samsung-laptop that its platform driver is
designed to run under BIOS and running under EFI can cause the machine to
become bricked or can cause Machine Check Exceptions.
Discussion about this problem:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557
https://bugzilla.kernel.org/show_bug.cgi?id=47121
The patches to fix this problem:
efi: Make 'efi_enabled' a function to query EFI facilities
83e68189745ad931c2afd45d8ee3303929233e7f
samsung-laptop: Disable on EFI hardware
e0094244e41c4d0c7ad69920681972fc45d8ce34
Unfortunately this problem comes back again if users specify "noefi" option.
This parameter clears EFI_BOOT and that driver continues to run even if running
under EFI. Refer to the document, this parameter should clear
EFI_RUNTIME_SERVICES instead.
Documentation/kernel-parameters.txt:
===============================================================================
...
noefi [X86] Disable EFI runtime services support.
...
===============================================================================
Documentation/x86/x86_64/uefi.txt:
===============================================================================
...
- If some or all EFI runtime services don't work, you can try following
kernel command line parameters to turn off some or all EFI runtime
services.
noefi turn off all EFI runtime services
...
===============================================================================
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/511C2C04.2070108@jp.fujitsu.com
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/platform/efi/efi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -85,7 +85,7 @@ EXPORT_SYMBOL(efi_enabled);
static int __init setup_noefi(char *arg)
{
- clear_bit(EFI_BOOT, &x86_efi_facility);
+ clear_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
return 0;
}
early_param("noefi", setup_noefi);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 059/153] ARM: samsung: fix assembly syntax for new gas
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (57 preceding siblings ...)
2013-03-04 3:38 ` [ 058/153] efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 060/153] ARM: w90x900: fix legacy assembly syntax Ben Hutchings
` (95 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Arnd Bergmann, Kukjin Kim, Ben Dooks
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
commit 2815774bb38445006074e16251b9ef5123bdc616 upstream.
Recent assembler versions complain about extraneous
whitespace inside [] brackets. This fixes all of
these instances for the samsung platforms. We should
backport this to all kernels that might need to
be built with new binutils.
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r2,[ r6,#(0x10)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x14)]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2410.S:48: Error: ARM register expected -- `ldr r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:49: Error: ARM register expected -- `ldr r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:50: Error: ARM register expected -- `ldr r9,[ r6 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:64: Error: ARM register expected -- `streq r7,[ r4 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:65: Error: ARM register expected -- `streq r8,[ r5 ]'
arch/arm/mach-s3c24xx/sleep-s3c2410.S:66: Error: ARM register expected -- `streq r9,[ r6 ]'
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r2,#((0x0B0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-((0)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/mach-s3c24xx/pm-h1940.S: Assembler messages:
arch/arm/mach-s3c24xx/pm-h1940.S:33: Error: ARM register expected -- `ldr pc,[ r0,#((0x0B8)+(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000))))-(((0x56000000)-(0x50000000))+(0xF6000000+(0x01000000)))]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S: Assembler messages:
arch/arm/mach-s3c24xx/sleep-s3c2412.S:60: Error: ARM register expected -- `ldrne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:61: Error: ARM register expected -- `strne r9,[ r1 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:62: Error: ARM register expected -- `ldrne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:63: Error: ARM register expected -- `strne r9,[ r2 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:64: Error: ARM register expected -- `ldrne r9,[ r3 ]'
arch/arm/mach-s3c24xx/sleep-s3c2412.S:65: Error: ARM register expected -- `strne r9,[ r3 ]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:83: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x08)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x18)]'
arch/arm/kernel/debug.S:85: Error: ARM register expected -- `ldr r2,[ r3,#(0x10)]'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
[bwh: Backported to 3.2: adjust filenames]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -40,17 +40,17 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
1004:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
moveq \rd, \rd, lsr #SHIFT_2440TXF
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
.macro fifo_full_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
@@ -68,18 +68,18 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
10000:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
.macro fifo_level_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2410_UFSTAT_TXMASK
.endm
--- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -34,10 +34,10 @@
@@ try the interrupt offset register, since it is there
- ldr \irqstat, [ \base, #INTPND ]
+ ldr \irqstat, [\base, #INTPND ]
teq \irqstat, #0
beq 1002f
- ldr \irqnr, [ \base, #INTOFFSET ]
+ ldr \irqnr, [\base, #INTOFFSET ]
mov \tmp, #1
tst \irqstat, \tmp, lsl \irqnr
bne 1001f
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -30,4 +30,4 @@
h1940_pm_return:
mov r0, #S3C2410_PA_GPIO
- ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+ ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
ldr r4, =S3C2410_REFRESH
ldr r5, =S3C24XX_MISCCR
ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
+ ldr r7, [r4] @ get REFRESH (and ensure in TLB)
+ ldr r8, [r5] @ get MISCCR (and ensure in TLB)
+ ldr r9, [r6] @ get CLKCON (and ensure in TLB)
orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
@@ align next bit of code to cache line
.align 5
s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
+ streq r7, [r4] @ SDRAM sleep command
+ streq r8, [r5] @ SDRAM power-down config
+ streq r9, [r6] @ CPU sleep
1: beq 1b
mov pc, r14
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
* retry, as simply returning causes the system to lock.
*/
- ldrne r9, [ r1 ]
- strne r9, [ r1 ]
- ldrne r9, [ r2 ]
- strne r9, [ r2 ]
- ldrne r9, [ r3 ]
- strne r9, [ r3 ]
+ ldrne r9, [r1]
+ strne r9, [r1]
+ ldrne r9, [r2]
+ strne r9, [r2]
+ ldrne r9, [r3]
+ strne r9, [r3]
bne s3c2412_sleep_enter1
mov pc, r14
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -14,12 +14,12 @@
/* The S5PV210/S5PC110 implementations are as belows. */
.macro fifo_level_s5pv210 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S5PV210_UFSTAT_TXMASK
.endm
.macro fifo_full_s5pv210 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S5PV210_UFSTAT_TXFULL
.endm
@@ -27,7 +27,7 @@
* most widely re-used */
.macro fifo_level_s3c2440 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
@@ -36,7 +36,7 @@
#endif
.macro fifo_full_s3c2440 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2440_UFSTAT_TXFULL
.endm
@@ -45,11 +45,11 @@
#endif
.macro senduart,rd,rx
- strb \rd, [\rx, # S3C2410_UTXH ]
+ strb \rd, [\rx, # S3C2410_UTXH]
.endm
.macro busyuart, rd, rx
- ldr \rd, [ \rx, # S3C2410_UFCON ]
+ ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
@@ -60,7 +60,7 @@
1001:
@ busy waiting for non fifo
- ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
@@ -68,7 +68,7 @@
.endm
.macro waituart,rd,rx
- ldr \rd, [ \rx, # S3C2410_UFCON ]
+ ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
@@ -79,7 +79,7 @@
b 1002f
1001:
@ idle waiting for non fifo
- ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 060/153] ARM: w90x900: fix legacy assembly syntax
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (58 preceding siblings ...)
2013-03-04 3:38 ` [ 059/153] ARM: samsung: fix assembly syntax for new gas Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 061/153] USB: ehci-omap: Fix autoloading of module Ben Hutchings
` (94 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Arnd Bergmann, Wan ZongShun
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <arnd@arndb.de>
commit fa5ce5f94c0f2bfa41ba68d2d2524298e1fc405e upstream.
New ARM binutils don't allow extraneous whitespace inside
of brackets, which causes this error on all mach-w90x900
defconfigs:
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]'
arch/arm/kernel/entry-armv.S:214: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x10C)]'
arch/arm/kernel/entry-armv.S:430: Error: ARM register expected -- `ldr r0,[ r6,#(0x110)]'
This removes the whitespace in order to build the kernel
again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/arm/mach-w90x900/include/mach/entry-macro.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/mach-w90x900/include/mach/entry-macro.S
+++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S
@@ -22,8 +22,8 @@
mov \base, #AIC_BA
- ldr \irqnr, [ \base, #AIC_IPER]
- ldr \irqnr, [ \base, #AIC_ISNR]
+ ldr \irqnr, [\base, #AIC_IPER]
+ ldr \irqnr, [\base, #AIC_ISNR]
cmp \irqnr, #0
.endm
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 061/153] USB: ehci-omap: Fix autoloading of module
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (59 preceding siblings ...)
2013-03-04 3:38 ` [ 060/153] ARM: w90x900: fix legacy assembly syntax Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 062/153] USB: usb-storage: unusual_devs update for Super TOP SATA bridge Ben Hutchings
` (93 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Roger Quadros, Alan Stern, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roger Quadros <rogerq@ti.com>
commit 04753523266629b1cd0518091da1658755787198 upstream.
The module alias should be "ehci-omap" and not
"omap-ehci" to match the platform device name.
The omap-ehci module should now autoload correctly.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/host/ehci-omap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -337,7 +337,7 @@ static const struct hc_driver ehci_omap_
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-MODULE_ALIAS("platform:omap-ehci");
+MODULE_ALIAS("platform:ehci-omap");
MODULE_AUTHOR("Texas Instruments, Inc.");
MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 062/153] USB: usb-storage: unusual_devs update for Super TOP SATA bridge
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (60 preceding siblings ...)
2013-03-04 3:38 ` [ 061/153] USB: ehci-omap: Fix autoloading of module Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 063/153] posix-cpu-timers: Fix nanosleep task_struct leak Ben Hutchings
` (92 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Josh Boyer, Carsten S., Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Boyer <jwboyer@redhat.com>
commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream.
The current entry in unusual_cypress.h for the Super TOP SATA bridge devices
seems to be causing corruption on newer revisions of this device. This has
been reported in Arch Linux and Fedora. The original patch was tested on
devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice
as 2.20. Limit the UNUSUAL_DEV entry to devices less than 2.20.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591
The Arch Forum post on this is here:
https://bbs.archlinux.org/viewtopic.php?id=152011
Reported-by: Carsten S. <carsteniq@yahoo.com>
Tested-by: Carsten S. <carsteniq@yahoo.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/storage/unusual_cypress.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,7 +31,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219,
"Super Top",
"USB 2.0 SATA BRIDGE",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 063/153] posix-cpu-timers: Fix nanosleep task_struct leak
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (61 preceding siblings ...)
2013-03-04 3:38 ` [ 062/153] USB: usb-storage: unusual_devs update for Super TOP SATA bridge Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 064/153] svcrpc: make svc_age_temp_xprts enqueue under sv_lock Ben Hutchings
` (91 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Stanislaw Gruszka, Dave Jones, John Stultz, Oleg Nesterov,
Thomas Gleixner
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <sgruszka@redhat.com>
commit e6c42c295e071dd74a66b5a9fcf4f44049888ed8 upstream.
The trinity fuzzer triggered a task_struct reference leak via
clock_nanosleep with CPU_TIMERs. do_cpu_nanosleep() calls
posic_cpu_timer_create(), but misses a corresponding
posix_cpu_timer_del() which leads to the task_struct reference leak.
Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20130215100810.GF4392@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/posix-cpu-timers.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1450,8 +1450,10 @@ static int do_cpu_nanosleep(const clocki
while (!signal_pending(current)) {
if (timer.it.cpu.expires.sched == 0) {
/*
- * Our timer fired and was reset.
+ * Our timer fired and was reset, below
+ * deletion can not fail.
*/
+ posix_cpu_timer_del(&timer);
spin_unlock_irq(&timer.it_lock);
return 0;
}
@@ -1469,9 +1471,26 @@ static int do_cpu_nanosleep(const clocki
* We were interrupted by a signal.
*/
sample_to_timespec(which_clock, timer.it.cpu.expires, rqtp);
- posix_cpu_timer_set(&timer, 0, &zero_it, it);
+ error = posix_cpu_timer_set(&timer, 0, &zero_it, it);
+ if (!error) {
+ /*
+ * Timer is now unarmed, deletion can not fail.
+ */
+ posix_cpu_timer_del(&timer);
+ }
spin_unlock_irq(&timer.it_lock);
+ while (error == TIMER_RETRY) {
+ /*
+ * We need to handle case when timer was or is in the
+ * middle of firing. In other cases we already freed
+ * resources.
+ */
+ spin_lock_irq(&timer.it_lock);
+ error = posix_cpu_timer_del(&timer);
+ spin_unlock_irq(&timer.it_lock);
+ }
+
if ((it->it_value.tv_sec | it->it_value.tv_nsec) == 0) {
/*
* It actually did fire already.
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 064/153] svcrpc: make svc_age_temp_xprts enqueue under sv_lock
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (62 preceding siblings ...)
2013-03-04 3:38 ` [ 063/153] posix-cpu-timers: Fix nanosleep task_struct leak Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 065/153] NFSv4.1: Dont decode skipped layoutgets Ben Hutchings
` (90 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, J. Bruce Fields, Jason Tibbitts, Paweł Sikora
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2112 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "J. Bruce Fields" <bfields@redhat.com>
commit e75bafbff2270993926abcc31358361db74a9bc2 upstream.
svc_age_temp_xprts expires xprts in a two-step process: first it takes
the sv_lock and moves the xprts to expire off their server-wide list
(sv_tempsocks or sv_permsocks) to a local list. Then it drops the
sv_lock and enqueues and puts each one.
I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the
sv_lock and sp_lock are not otherwise nested anywhere (and documentation
at the top of this file claims it's correct to nest these with sp_lock
inside.)
Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
Tested-by: Paweł Sikora <pawel.sikora@agmk.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
net/sunrpc/svc_xprt.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -816,7 +816,6 @@ static void svc_age_temp_xprts(unsigned
struct svc_serv *serv = (struct svc_serv *)closure;
struct svc_xprt *xprt;
struct list_head *le, *next;
- LIST_HEAD(to_be_aged);
dprintk("svc_age_temp_xprts\n");
@@ -837,25 +836,15 @@ static void svc_age_temp_xprts(unsigned
if (atomic_read(&xprt->xpt_ref.refcount) > 1 ||
test_bit(XPT_BUSY, &xprt->xpt_flags))
continue;
- svc_xprt_get(xprt);
- list_move(le, &to_be_aged);
+ list_del_init(le);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
set_bit(XPT_DETACHED, &xprt->xpt_flags);
- }
- spin_unlock_bh(&serv->sv_lock);
-
- while (!list_empty(&to_be_aged)) {
- le = to_be_aged.next;
- /* fiddling the xpt_list node is safe 'cos we're XPT_DETACHED */
- list_del_init(le);
- xprt = list_entry(le, struct svc_xprt, xpt_list);
-
dprintk("queuing xprt %p for closing\n", xprt);
/* a thread will dequeue and close it soon */
svc_xprt_enqueue(xprt);
- svc_xprt_put(xprt);
}
+ spin_unlock_bh(&serv->sv_lock);
mod_timer(&serv->sv_temptimer, jiffies + svc_conn_age_period * HZ);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 065/153] NFSv4.1: Dont decode skipped layoutgets
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (63 preceding siblings ...)
2013-03-04 3:38 ` [ 064/153] svcrpc: make svc_age_temp_xprts enqueue under sv_lock Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 066/153] umount oops when remove blocklayoutdriver first Ben Hutchings
` (89 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Weston Andros Adamson, Trond Myklebust
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Weston Andros Adamson <dros@netapp.com>
commit 085b7a45c63d3da5be155faab9249a5cab224561 upstream.
layoutget's prepare hook can call rpc_exit with status = NFS4_OK (0).
Because of this, nfs4_proc_layoutget can't depend on a 0 status to mean
that the RPC was successfully sent, received and parsed.
To fix this, use the result's len member to see if parsing took place.
This fixes the following OOPS -- calling xdr_init_decode() with a buffer length
0 doesn't set the stream's 'p' member and ends up using uninitialized memory
in filelayout_decode_layout.
BUG: unable to handle kernel paging request at 0000000000008050
IP: [<ffffffff81282e78>] memcpy+0x18/0x120
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/0000:02:01.0/irq
CPU 1
Modules linked in: nfs_layout_nfsv41_files nfs lockd fscache auth_rpcgss nfs_acl autofs4 sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log dm_mod ppdev parport_pc parport snd_ens1371 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc e1000 microcode vmware_balloon i2c_piix4 i2c_core sg shpchp ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif pata_acpi ata_generic ata_piix mptspi mptscsih mptbase scsi_transport_spi [last unloaded: speedstep_lib]
Pid: 1665, comm: flush-0:22 Not tainted 2.6.32-356-test-2 #2 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[<ffffffff81282e78>] [<ffffffff81282e78>] memcpy+0x18/0x120
RSP: 0018:ffff88003dfab588 EFLAGS: 00010206
RAX: ffff88003dc42000 RBX: ffff88003dfab610 RCX: 0000000000000009
RDX: 000000003f807ff0 RSI: 0000000000008050 RDI: ffff88003dc42000
RBP: ffff88003dfab5b0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000080 R12: 0000000000000024
R13: ffff88003dc42000 R14: ffff88003f808030 R15: ffff88003dfab6a0
FS: 0000000000000000(0000) GS:ffff880003420000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000008050 CR3: 000000003bc92000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process flush-0:22 (pid: 1665, threadinfo ffff88003dfaa000, task ffff880037f77540)
Stack:
ffffffffa0398ac1 ffff8800397c5940 ffff88003dfab610 ffff88003dfab6a0
<d> ffff88003dfab5d0 ffff88003dfab680 ffffffffa01c150b ffffea0000d82e70
<d> 000000508116713b 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffffa0398ac1>] ? xdr_inline_decode+0xb1/0x120 [sunrpc]
[<ffffffffa01c150b>] filelayout_decode_layout+0xeb/0x350 [nfs_layout_nfsv41_files]
[<ffffffffa01c17fc>] filelayout_alloc_lseg+0x8c/0x3c0 [nfs_layout_nfsv41_files]
[<ffffffff8150e6ce>] ? __wait_on_bit+0x7e/0x90
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/nfs/nfs4proc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5891,7 +5891,8 @@ int nfs4_proc_layoutget(struct nfs4_layo
status = nfs4_wait_for_completion_rpc_task(task);
if (status == 0)
status = task->tk_status;
- if (status == 0)
+ /* if layoutp->len is 0, nfs4_layoutget_prepare called rpc_exit */
+ if (status == 0 && lgp->res.layoutp->len)
status = pnfs_layout_process(lgp);
rpc_put_task(task);
dprintk("<-- %s status=%d\n", __func__, status);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 066/153] umount oops when remove blocklayoutdriver first
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (64 preceding siblings ...)
2013-03-04 3:38 ` [ 065/153] NFSv4.1: Dont decode skipped layoutgets Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 067/153] cgroup: fix exit() vs rmdir() race Ben Hutchings
` (88 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, fanchaoting, Trond Myklebust
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: fanchaoting <fanchaoting@cn.fujitsu.com>
commit 5a12cca697aca5dfba42a7d4c3356acc0445a2b0 upstream.
now pnfs client uses block layout, maybe we can remove
blocklayoutdriver first. if we umount later,
it can cause oops in unset_pnfs_layoutdriver.
because nfss->pnfs_curr_ld->clear_layoutdriver is invalid.
reproduce it:
modprobe blocklayoutdriver
mount -t nfs4 -o minorversion=1 pnfsip:/ /mnt/
rmmod blocklayoutdriver
umount /mnt
then you can see following
CPU 0
Pid: 17023, comm: umount.nfs4 Tainted: GF O 3.7.0-rc6-pnfs #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform
RIP: 0010:[<ffffffffa04cfe6d>] [<ffffffffa04cfe6d>] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4]
RSP: 0018:ffff8800022d9e48 EFLAGS: 00010286
RAX: ffffffffa04a1b00 RBX: ffff88000b013800 RCX: 0000000000000001
RDX: ffffffff81ae8ee0 RSI: ffff880001ee94b8 RDI: ffff88000b013800
RBP: ffff8800022d9e58 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880001ee9400
R13: ffff8800105978c0 R14: 00007fff25846c08 R15: 0000000001bba550
FS: 00007f45ae7f0700(0000) GS:ffff880012c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffffffa04a1b38 CR3: 0000000002c0c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process umount.nfs4 (pid: 17023, threadinfo ffff8800022d8000, task ffff880006e48aa0)
Stack:
ffff8800105978c0 ffff88000b013800 ffff8800022d9e78 ffffffffa04cd0ce
ffff8800022d9e78 ffff88000b013800 ffff8800022d9ea8 ffffffffa04755a7
ffff8800022d9ea8 ffff880002f96400 ffff88000b013800 ffff880002f96400
Call Trace:
[<ffffffffa04cd0ce>] nfs4_destroy_server+0x1e/0x30 [nfsv4]
[<ffffffffa04755a7>] nfs_free_server+0xb7/0x150 [nfs]
[<ffffffffa047d4d5>] nfs_kill_super+0x35/0x40 [nfs]
[<ffffffff81178d35>] deactivate_locked_super+0x45/0x70
[<ffffffff8117986a>] deactivate_super+0x4a/0x70
[<ffffffff81193ee2>] mntput_no_expire+0xd2/0x130
[<ffffffff81194d62>] sys_umount+0x72/0xe0
[<ffffffff8154af59>] system_call_fastpath+0x16/0x1b
Code: 06 e1 b8 ea ff ff ff eb 9e 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 48 8b 87 80 03 00 00 48 89 fb 48 85 c0 74 29 <48> 8b 40 38 48 85 c0 74 02 ff d0 48 8b 03 3e ff 48 04 0f 94 c2
RIP [<ffffffffa04cfe6d>] unset_pnfs_layoutdriver+0x1d/0x70 [nfsv4]
RSP <ffff8800022d9e48>
CR2: ffffffffa04a1b38
---[ end trace 29f75aaedda058bf ]---
Signed-off-by: fanchaoting<fanchaoting@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/nfs/blocklayout/blocklayout.c | 1 +
fs/nfs/objlayout/objio_osd.c | 1 +
2 files changed, 2 insertions(+)
--- a/fs/nfs/blocklayout/blocklayout.c
+++ b/fs/nfs/blocklayout/blocklayout.c
@@ -1101,6 +1101,7 @@ static const struct nfs_pageio_ops bl_pg
static struct pnfs_layoutdriver_type blocklayout_type = {
.id = LAYOUT_BLOCK_VOLUME,
.name = "LAYOUT_BLOCK_VOLUME",
+ .owner = THIS_MODULE,
.read_pagelist = bl_read_pagelist,
.write_pagelist = bl_write_pagelist,
.alloc_layout_hdr = bl_alloc_layout_hdr,
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -569,6 +569,7 @@ static struct pnfs_layoutdriver_type obj
.flags = PNFS_LAYOUTRET_ON_SETATTR |
PNFS_LAYOUTRET_ON_ERROR,
+ .owner = THIS_MODULE,
.alloc_layout_hdr = objlayout_alloc_layout_hdr,
.free_layout_hdr = objlayout_free_layout_hdr,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 067/153] cgroup: fix exit() vs rmdir() race
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (65 preceding siblings ...)
2013-03-04 3:38 ` [ 066/153] umount oops when remove blocklayoutdriver first Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 068/153] cpuset: fix cpuset_print_task_mems_allowed() vs rename() race Ben Hutchings
` (87 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Li Zefan, Tejun Heo
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Zefan <lizefan@huawei.com>
commit 71b5707e119653039e6e95213f00479668c79b75 upstream.
In cgroup_exit() put_css_set_taskexit() is called without any lock,
which might lead to accessing a freed cgroup:
thread1 thread2
---------------------------------------------
exit()
cgroup_exit()
put_css_set_taskexit()
atomic_dec(cgrp->count);
rmdir();
/* not safe !! */
check_for_release(cgrp);
rcu_read_lock() can be used to make sure the cgroup is alive.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/cgroup.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -361,12 +361,20 @@ static void __put_css_set(struct css_set
struct cgroup *cgrp = link->cgrp;
list_del(&link->cg_link_list);
list_del(&link->cgrp_link_list);
+
+ /*
+ * We may not be holding cgroup_mutex, and if cgrp->count is
+ * dropped to 0 the cgroup can be destroyed at any time, hence
+ * rcu_read_lock is used to keep it alive.
+ */
+ rcu_read_lock();
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
+ rcu_read_unlock();
kfree(link);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 068/153] cpuset: fix cpuset_print_task_mems_allowed() vs rename() race
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (66 preceding siblings ...)
2013-03-04 3:38 ` [ 067/153] cgroup: fix exit() vs rmdir() race Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 069/153] ext4: fix xattr block allocation/release with bigalloc Ben Hutchings
` (86 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Li Zefan, Tejun Heo
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Zefan <lizefan@huawei.com>
commit 63f43f55c9bbc14f76b582644019b8a07dc8219a upstream.
rename() will change dentry->d_name. The result of this race can
be worse than seeing partially rewritten name, but we might access
a stale pointer because rename() will re-allocate memory to hold
a longer name.
It's safe in the protection of dentry->d_lock.
v2: check NULL dentry before acquiring dentry lock.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/cpuset.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2507,8 +2507,16 @@ void cpuset_print_task_mems_allowed(stru
dentry = task_cs(tsk)->css.cgroup->dentry;
spin_lock(&cpuset_buffer_lock);
- snprintf(cpuset_name, CPUSET_NAME_LEN,
- dentry ? (const char *)dentry->d_name.name : "/");
+
+ if (!dentry) {
+ strcpy(cpuset_name, "/");
+ } else {
+ spin_lock(&dentry->d_lock);
+ strlcpy(cpuset_name, (const char *)dentry->d_name.name,
+ CPUSET_NAME_LEN);
+ spin_unlock(&dentry->d_lock);
+ }
+
nodelist_scnprintf(cpuset_nodelist, CPUSET_NODELIST_LEN,
tsk->mems_allowed);
printk(KERN_INFO "%s cpuset=%s mems_allowed=%s\n",
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 069/153] ext4: fix xattr block allocation/release with bigalloc
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (67 preceding siblings ...)
2013-03-04 3:38 ` [ 068/153] cpuset: fix cpuset_print_task_mems_allowed() vs rename() race Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 070/153] mm: fix pageblock bitmap allocation Ben Hutchings
` (85 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Lukas Czerner, Theodore Tso, Eric Sandeen
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Czerner <lczerner@redhat.com>
commit 1231b3a1eb5740192aeebf5344dd6d6da000febf upstream.
Currently when new xattr block is created or released we we would call
dquot_free_block() or dquot_alloc_block() respectively, among the else
decrementing or incrementing the number of blocks assigned to the
inode by one block.
This however does not work for bigalloc file system because we always
allocate/free the whole cluster so we have to count with that in
dquot_free_block() and dquot_alloc_block() as well.
Use the clusters-to-blocks conversion EXT4_C2B() when passing number of
blocks to the dquot_alloc/free functions to fix the problem.
The problem has been revealed by xfstests #117 (and possibly others).
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/xattr.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -496,7 +496,7 @@ ext4_xattr_release_block(handle_t *handl
error = ext4_handle_dirty_metadata(handle, inode, bh);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
- dquot_free_block(inode, 1);
+ dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
ea_bdebug(bh, "refcount now=%d; releasing",
le32_to_cpu(BHDR(bh)->h_refcount));
}
@@ -785,7 +785,8 @@ inserted:
else {
/* The old block is released after updating
the inode. */
- error = dquot_alloc_block(inode, 1);
+ error = dquot_alloc_block(inode,
+ EXT4_C2B(EXT4_SB(sb), 1));
if (error)
goto cleanup;
error = ext4_journal_get_write_access(handle,
@@ -881,7 +882,7 @@ cleanup:
return error;
cleanup_dquot:
- dquot_free_block(inode, 1);
+ dquot_free_block(inode, EXT4_C2B(EXT4_SB(sb), 1));
goto cleanup;
bad_block:
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 070/153] mm: fix pageblock bitmap allocation
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (68 preceding siblings ...)
2013-03-04 3:38 ` [ 069/153] ext4: fix xattr block allocation/release with bigalloc Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 071/153] rtlwifi: usb: allocate URB control message setup_packet and data buffer separately Ben Hutchings
` (84 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Linus Torvalds, Mel Gorman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Torvalds <torvalds@linux-foundation.org>
commit 7c45512df987c5619db041b5c9b80d281e26d3db upstream.
Commit c060f943d092 ("mm: use aligned zone start for pfn_to_bitidx
calculation") fixed out calculation of the index into the pageblock
bitmap when a !SPARSEMEM zome was not aligned to pageblock_nr_pages.
However, the _allocation_ of that bitmap had never taken this alignment
requirement into accout, so depending on the exact size and alignment of
the zone, the use of that index could then access past the allocation,
resulting in some very subtle memory corruption.
This was reported (and bisected) by Ingo Molnar: one of his random
config builds would hang with certain very specific kernel command line
options.
In the meantime, commit c060f943d092 has been marked for stable, so this
fix needs to be back-ported to the stable kernels that backported the
commit to use the right alignment.
Bisected-and-tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
mm/page_alloc.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4253,10 +4253,11 @@ static void __meminit calculate_node_tot
* round what is now in bits to nearest long in bits, then return it in
* bytes.
*/
-static unsigned long __init usemap_size(unsigned long zonesize)
+static unsigned long __init usemap_size(unsigned long zone_start_pfn, unsigned long zonesize)
{
unsigned long usemapsize;
+ zonesize += zone_start_pfn & (pageblock_nr_pages-1);
usemapsize = roundup(zonesize, pageblock_nr_pages);
usemapsize = usemapsize >> pageblock_order;
usemapsize *= NR_PAGEBLOCK_BITS;
@@ -4266,17 +4267,19 @@ static unsigned long __init usemap_size(
}
static void __init setup_usemap(struct pglist_data *pgdat,
- struct zone *zone, unsigned long zonesize)
+ struct zone *zone,
+ unsigned long zone_start_pfn,
+ unsigned long zonesize)
{
- unsigned long usemapsize = usemap_size(zonesize);
+ unsigned long usemapsize = usemap_size(zone_start_pfn, zonesize);
zone->pageblock_flags = NULL;
if (usemapsize)
zone->pageblock_flags = alloc_bootmem_node_nopanic(pgdat,
usemapsize);
}
#else
-static inline void setup_usemap(struct pglist_data *pgdat,
- struct zone *zone, unsigned long zonesize) {}
+static inline void setup_usemap(struct pglist_data *pgdat, struct zone *zone,
+ unsigned long zone_start_pfn, unsigned long zonesize) {}
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
@@ -4401,7 +4404,7 @@ static void __paginginit free_area_init_
continue;
set_pageblock_order();
- setup_usemap(pgdat, zone, size);
+ setup_usemap(pgdat, zone, zone_start_pfn, size);
ret = init_currently_empty_zone(zone, zone_start_pfn,
size, MEMMAP_EARLY);
BUG_ON(ret);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 071/153] rtlwifi: usb: allocate URB control message setup_packet and data buffer separately
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (69 preceding siblings ...)
2013-03-04 3:38 ` [ 070/153] mm: fix pageblock bitmap allocation Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 072/153] target: Fix lookup of dynamic NodeACLs during cached demo-mode operation Ben Hutchings
` (83 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Jussi Kivilinna, John W. Linville
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
commit bc6b89237acb3dee6af6e64e51a18255fef89cc2 upstream.
rtlwifi allocates both setup_packet and data buffer of control message urb,
using shared kmalloc in _usbctrl_vendorreq_async_write. Structure used for
allocating is:
struct {
u8 data[254];
struct usb_ctrlrequest dr;
};
Because 'struct usb_ctrlrequest' is __packed, setup packet is unaligned and
DMA mapping of both 'data' and 'dr' confuses ARM/sunxi, leading to memory
corruptions and freezes.
Patch changes setup packet to be allocated separately.
[v2]:
- Use WARN_ON_ONCE instead of WARN_ON
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/rtlwifi/usb.c | 44 +++++++++++++++++++++++-------------
1 file changed, 28 insertions(+), 16 deletions(-)
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -44,8 +44,12 @@
static void usbctrl_async_callback(struct urb *urb)
{
- if (urb)
- kfree(urb->context);
+ if (urb) {
+ /* free dr */
+ kfree(urb->setup_packet);
+ /* free databuf */
+ kfree(urb->transfer_buffer);
+ }
}
static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request,
@@ -57,38 +61,46 @@ static int _usbctrl_vendorreq_async_writ
u8 reqtype;
struct usb_ctrlrequest *dr;
struct urb *urb;
- struct rtl819x_async_write_data {
- u8 data[REALTEK_USB_VENQT_MAX_BUF_SIZE];
- struct usb_ctrlrequest dr;
- } *buf;
+ const u16 databuf_maxlen = REALTEK_USB_VENQT_MAX_BUF_SIZE;
+ u8 *databuf;
+
+ if (WARN_ON_ONCE(len > databuf_maxlen))
+ len = databuf_maxlen;
pipe = usb_sndctrlpipe(udev, 0); /* write_out */
reqtype = REALTEK_USB_VENQT_WRITE;
- buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
- if (!buf)
+ dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
+ if (!dr)
return -ENOMEM;
+ databuf = kmalloc(databuf_maxlen, GFP_ATOMIC);
+ if (!databuf) {
+ kfree(dr);
+ return -ENOMEM;
+ }
+
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- kfree(buf);
+ kfree(databuf);
+ kfree(dr);
return -ENOMEM;
}
- dr = &buf->dr;
-
dr->bRequestType = reqtype;
dr->bRequest = request;
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(len);
- memcpy(buf, pdata, len);
+ memcpy(databuf, pdata, len);
usb_fill_control_urb(urb, udev, pipe,
- (unsigned char *)dr, buf, len,
- usbctrl_async_callback, buf);
+ (unsigned char *)dr, databuf, len,
+ usbctrl_async_callback, NULL);
rc = usb_submit_urb(urb, GFP_ATOMIC);
- if (rc < 0)
- kfree(buf);
+ if (rc < 0) {
+ kfree(databuf);
+ kfree(dr);
+ }
usb_free_urb(urb);
return rc;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 072/153] target: Fix lookup of dynamic NodeACLs during cached demo-mode operation
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (70 preceding siblings ...)
2013-03-04 3:38 ` [ 071/153] rtlwifi: usb: allocate URB control message setup_packet and data buffer separately Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 073/153] target: Add missing mapped_lun bounds checking during make_mappedlun setup Ben Hutchings
` (82 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Nicholas Bellinger
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit fcf29481fb8e106daad6688f2e898226ee928992 upstream.
This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynamically created
se_node_acl generated during session login would be skipped during
subsequent lookup due to the '!acl->dynamic_node_acl' check, causing
a new se_node_acl to be created with a duplicate ->initiatorname.
This would occur when a fabric endpoint was configured with
TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1
preventing the release of an existing se_node_acl during se_session
shutdown.
Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl()
within core_dev_init_initiator_node_lun_acl() that originally
required the extra '!acl->dynamic_node_acl' check, and just pass
the configfs provided se_node_acl pointer instead.
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[bwh: Backported to 3.2: adjust context, filename of header]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1439,24 +1439,18 @@ static struct se_lun *core_dev_get_lun(s
struct se_lun_acl *core_dev_init_initiator_node_lun_acl(
struct se_portal_group *tpg,
+ struct se_node_acl *nacl,
u32 mapped_lun,
- char *initiatorname,
int *ret)
{
struct se_lun_acl *lacl;
- struct se_node_acl *nacl;
- if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) {
+ if (strlen(nacl->initiatorname) >= TRANSPORT_IQN_LEN) {
pr_err("%s InitiatorName exceeds maximum size.\n",
tpg->se_tpg_tfo->get_fabric_name());
*ret = -EOVERFLOW;
return NULL;
}
- nacl = core_tpg_get_initiator_node_acl(tpg, initiatorname);
- if (!nacl) {
- *ret = -EINVAL;
- return NULL;
- }
lacl = kzalloc(sizeof(struct se_lun_acl), GFP_KERNEL);
if (!lacl) {
pr_err("Unable to allocate memory for struct se_lun_acl.\n");
@@ -1467,7 +1461,8 @@ struct se_lun_acl *core_dev_init_initiat
INIT_LIST_HEAD(&lacl->lacl_list);
lacl->mapped_lun = mapped_lun;
lacl->se_lun_nacl = nacl;
- snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname);
+ snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s",
+ nacl->initiatorname);
return lacl;
}
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -355,8 +355,8 @@ static struct config_group *target_fabri
goto out;
}
- lacl = core_dev_init_initiator_node_lun_acl(se_tpg, mapped_lun,
- config_item_name(acl_ci), &ret);
+ lacl = core_dev_init_initiator_node_lun_acl(se_tpg, se_nacl,
+ mapped_lun, &ret);
if (!lacl) {
ret = -EINVAL;
goto out;
--- a/include/target/target_core_device.h
+++ b/include/target/target_core_device.h
@@ -50,7 +50,7 @@ extern struct se_lun *core_dev_add_lun(s
extern int core_dev_del_lun(struct se_portal_group *, u32);
extern struct se_lun *core_get_lun_from_tpg(struct se_portal_group *, u32);
extern struct se_lun_acl *core_dev_init_initiator_node_lun_acl(struct se_portal_group *,
- u32, char *, int *);
+ struct se_node_acl *, u32, int *);
extern int core_dev_add_initiator_node_lun_acl(struct se_portal_group *,
struct se_lun_acl *, u32, u32);
extern int core_dev_del_initiator_node_lun_acl(struct se_portal_group *,
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -117,16 +117,10 @@ struct se_node_acl *core_tpg_get_initiat
struct se_node_acl *acl;
spin_lock_irq(&tpg->acl_node_lock);
- list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
- if (!strcmp(acl->initiatorname, initiatorname) &&
- !acl->dynamic_node_acl) {
- spin_unlock_irq(&tpg->acl_node_lock);
- return acl;
- }
- }
+ acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
spin_unlock_irq(&tpg->acl_node_lock);
- return NULL;
+ return acl;
}
/* core_tpg_add_node_to_devs():
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 073/153] target: Add missing mapped_lun bounds checking during make_mappedlun setup
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (71 preceding siblings ...)
2013-03-04 3:38 ` [ 072/153] target: Fix lookup of dynamic NodeACLs during cached demo-mode operation Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 074/153] ftrace: Call ftrace cleanup module notifier after all other notifiers Ben Hutchings
` (81 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Nicholas Bellinger, Jan Engelhardt
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit fbbf8555a986ed31e54f006b6cc637ea4ff1425b upstream.
This patch adds missing bounds checking for the configfs provided
mapped_lun value during target_fabric_make_mappedlun() setup ahead
of se_lun_acl initialization.
This addresses a potential OOPs when using a mapped_lun value that
exceeds the hardcoded TRANSPORT_MAX_LUNS_PER_TPG-1 value within
se_node_acl->device_list[].
Reported-by: Jan Engelhardt <jengelh@inai.de>
Cc: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/target/target_core_fabric_configfs.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -354,6 +354,14 @@ static struct config_group *target_fabri
ret = -EINVAL;
goto out;
}
+ if (mapped_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) {
+ pr_err("Mapped LUN: %lu exceeds TRANSPORT_MAX_LUNS_PER_TPG"
+ "-1: %u for Target Portal Group: %u\n", mapped_lun,
+ TRANSPORT_MAX_LUNS_PER_TPG-1,
+ se_tpg->se_tpg_tfo->tpg_get_tag(se_tpg));
+ ret = -EINVAL;
+ goto out;
+ }
lacl = core_dev_init_initiator_node_lun_acl(se_tpg, se_nacl,
mapped_lun, &ret);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 074/153] ftrace: Call ftrace cleanup module notifier after all other notifiers
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (72 preceding siblings ...)
2013-03-04 3:38 ` [ 073/153] target: Add missing mapped_lun bounds checking during make_mappedlun setup Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 075/153] b43: Increase number of RX DMA slots Ben Hutchings
` (80 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Steven Rostedt (Red Hat), Frank Ch. Eigler,
Masami Hiramatsu
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
commit 8c189ea64eea01ca20d102ddb74d6936dd16c579 upstream.
Commit: c1bf08ac "ftrace: Be first to run code modification on modules"
changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.
Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.
Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.
By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/trace/ftrace.c | 46 ++++++++++++++++++++++++++++++++--------------
1 file changed, 32 insertions(+), 14 deletions(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3454,37 +3454,51 @@ static void ftrace_init_module(struct mo
ftrace_process_locs(mod, start, end);
}
-static int ftrace_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+ unsigned long val, void *data)
{
struct module *mod = data;
- switch (val) {
- case MODULE_STATE_COMING:
+ if (val == MODULE_STATE_COMING)
ftrace_init_module(mod, mod->ftrace_callsites,
mod->ftrace_callsites +
mod->num_ftrace_callsites);
- break;
- case MODULE_STATE_GOING:
+ return 0;
+}
+
+static int ftrace_module_notify_exit(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct module *mod = data;
+
+ if (val == MODULE_STATE_GOING)
ftrace_release_mod(mod);
- break;
- }
return 0;
}
#else
-static int ftrace_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ return 0;
+}
+static int ftrace_module_notify_exit(struct notifier_block *self,
+ unsigned long val, void *data)
{
return 0;
}
#endif /* CONFIG_MODULES */
-struct notifier_block ftrace_module_nb = {
- .notifier_call = ftrace_module_notify,
+struct notifier_block ftrace_module_enter_nb = {
+ .notifier_call = ftrace_module_notify_enter,
.priority = INT_MAX, /* Run before anything that can use kprobes */
};
+struct notifier_block ftrace_module_exit_nb = {
+ .notifier_call = ftrace_module_notify_exit,
+ .priority = INT_MIN, /* Run after anything that can remove kprobes */
+};
+
extern unsigned long __start_mcount_loc[];
extern unsigned long __stop_mcount_loc[];
@@ -3516,9 +3530,13 @@ void __init ftrace_init(void)
__start_mcount_loc,
__stop_mcount_loc);
- ret = register_module_notifier(&ftrace_module_nb);
+ ret = register_module_notifier(&ftrace_module_enter_nb);
+ if (ret)
+ pr_warning("Failed to register trace ftrace module enter notifier\n");
+
+ ret = register_module_notifier(&ftrace_module_exit_nb);
if (ret)
- pr_warning("Failed to register trace ftrace module notifier\n");
+ pr_warning("Failed to register trace ftrace module exit notifier\n");
set_ftrace_early_filters();
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 075/153] b43: Increase number of RX DMA slots
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (73 preceding siblings ...)
2013-03-04 3:38 ` [ 074/153] ftrace: Call ftrace cleanup module notifier after all other notifiers Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 076/153] NLM: Ensure that we resend all pending blocking locks after a reclaim Ben Hutchings
` (79 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Larry Finger, Bastian Bittorf, David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <Larry.Finger@lwfinger.net>
commit ccae0e50c16a7f7adb029c169147400d1ce9f703 upstream.
Bastian Bittorf reported that some of the silent freezes on a Linksys WRT54G
were due to overflow of the RX DMA ring buffer, which was created with 64
slots. That finding reminded me that I was seeing similar crashed on a netbook,
which also has a relatively slow processor. After increasing the number of
slots to 128, runs on the netbook that previously failed now worked; however,
I found that 109 slots had been used in one test. For that reason, the number
of slots is being increased to 256.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Bastian Bittorf <bittorf@bluebottle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/b43/dma.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -169,7 +169,7 @@ struct b43_dmadesc_generic {
/* DMA engine tuning knobs */
#define B43_TXRING_SLOTS 256
-#define B43_RXRING_SLOTS 64
+#define B43_RXRING_SLOTS 256
#define B43_DMA0_RX_FW598_BUFSIZE (B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN)
#define B43_DMA0_RX_FW351_BUFSIZE (B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 076/153] NLM: Ensure that we resend all pending blocking locks after a reclaim
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (74 preceding siblings ...)
2013-03-04 3:38 ` [ 075/153] b43: Increase number of RX DMA slots Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 077/153] ALSA: hda - hdmi: ELD shouldnt be valid after unplug Ben Hutchings
` (78 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Trond Myklebust, Wangyuan Zhang
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Trond Myklebust <Trond.Myklebust@netapp.com>
commit 666b3d803a511fbc9bc5e5ea8ce66010cf03ea13 upstream.
Currently, nlmclnt_lock will break out of the for(;;) loop when
the reclaimer wakes up the blocking lock thread by setting
nlm_lck_denied_grace_period. This causes the lock request to fail
with an ENOLCK error.
The intention was always to ensure that we resend the lock request
after the grace period has expired.
Reported-by: Wangyuan Zhang <Wangyuan.Zhang@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/lockd/clntproc.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -551,6 +551,9 @@ again:
status = nlmclnt_block(block, req, NLMCLNT_POLL_TIMEOUT);
if (status < 0)
break;
+ /* Resend the blocking lock request after a server reboot */
+ if (resp->status == nlm_lck_denied_grace_period)
+ continue;
if (resp->status != nlm_lck_blocked)
break;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 077/153] ALSA: hda - hdmi: ELD shouldnt be valid after unplug
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (75 preceding siblings ...)
2013-03-04 3:38 ` [ 076/153] NLM: Ensure that we resend all pending blocking locks after a reclaim Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 078/153] xen-blkback: do not leak mode property Ben Hutchings
` (77 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, David Henningsson, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Henningsson <david.henningsson@canonical.com>
commit bbfd8a19b6913f50a362457c34d49bfafe5e456e upstream.
Currently, eld_valid is never set to false, except at kernel module
load time. This patch makes sure that eld is no longer valid when
the cable is (hot-)unplugged.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/pci/hda/patch_hdmi.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -987,6 +987,7 @@ static void hdmi_present_sense(struct hd
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
codec->addr, pin_nid, eld->monitor_present, eld_valid);
+ eld->eld_valid = false;
if (eld_valid) {
if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 078/153] xen-blkback: do not leak mode property
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (76 preceding siblings ...)
2013-03-04 3:38 ` [ 077/153] ALSA: hda - hdmi: ELD shouldnt be valid after unplug Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 079/153] drm: dont add inferred modes for monitors that dont support them Ben Hutchings
` (76 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jan Beulich, Olaf Hering, Jan Beulich,
Konrad Rzeszutek Wilk
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Beulich <JBeulich@suse.com>
commit 9d092603cc306ee6edfe917bf9ab8beb5f32d7bc upstream.
"be->mode" is obtained from xenbus_read(), which does a kmalloc() for
the message body. The short string is never released, so do it along
with freeing "be" itself, and make sure the string isn't kept when
backend_changed() doesn't complete successfully (which made it
desirable to slightly re-structure that function, so that the error
cleanup can be done in one place).
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/block/xen-blkback/xenbus.c | 49 ++++++++++++++++++------------------
1 file changed, 24 insertions(+), 25 deletions(-)
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -364,6 +364,7 @@ static int xen_blkbk_remove(struct xenbu
be->blkif = NULL;
}
+ kfree(be->mode);
kfree(be);
dev_set_drvdata(&dev->dev, NULL);
return 0;
@@ -513,6 +514,7 @@ static void backend_changed(struct xenbu
= container_of(watch, struct backend_info, backend_watch);
struct xenbus_device *dev = be->dev;
int cdrom = 0;
+ unsigned long handle;
char *device_type;
DPRINTK("");
@@ -532,10 +534,10 @@ static void backend_changed(struct xenbu
return;
}
- if ((be->major || be->minor) &&
- ((be->major != major) || (be->minor != minor))) {
- pr_warn(DRV_PFX "changing physical device (from %x:%x to %x:%x) not supported.\n",
- be->major, be->minor, major, minor);
+ if (be->major | be->minor) {
+ if (be->major != major || be->minor != minor)
+ pr_warn(DRV_PFX "changing physical device (from %x:%x to %x:%x) not supported.\n",
+ be->major, be->minor, major, minor);
return;
}
@@ -553,36 +555,33 @@ static void backend_changed(struct xenbu
kfree(device_type);
}
- if (be->major == 0 && be->minor == 0) {
- /* Front end dir is a number, which is used as the handle. */
-
- char *p = strrchr(dev->otherend, '/') + 1;
- long handle;
- err = strict_strtoul(p, 0, &handle);
- if (err)
- return;
+ /* Front end dir is a number, which is used as the handle. */
+ err = strict_strtoul(strrchr(dev->otherend, '/') + 1, 0, &handle);
+ if (err)
+ return;
- be->major = major;
- be->minor = minor;
+ be->major = major;
+ be->minor = minor;
- err = xen_vbd_create(be->blkif, handle, major, minor,
- (NULL == strchr(be->mode, 'w')), cdrom);
- if (err) {
- be->major = 0;
- be->minor = 0;
- xenbus_dev_fatal(dev, err, "creating vbd structure");
- return;
- }
+ err = xen_vbd_create(be->blkif, handle, major, minor,
+ !strchr(be->mode, 'w'), cdrom);
+ if (err)
+ xenbus_dev_fatal(dev, err, "creating vbd structure");
+ else {
err = xenvbd_sysfs_addif(dev);
if (err) {
xen_vbd_free(&be->blkif->vbd);
- be->major = 0;
- be->minor = 0;
xenbus_dev_fatal(dev, err, "creating sysfs entries");
- return;
}
+ }
+ if (err) {
+ kfree(be->mode);
+ be->mode = NULL;
+ be->major = 0;
+ be->minor = 0;
+ } else {
/* We're potentially connected now */
xen_update_blkif_status(be->blkif);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 079/153] drm: dont add inferred modes for monitors that dont support them
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (77 preceding siblings ...)
2013-03-04 3:38 ` [ 078/153] xen-blkback: do not leak mode property Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 080/153] drm/i915: disable shared panel fitter for pipe Ben Hutchings
` (75 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Paulo Zanoni, Alex Deucher, Adam Jackson, Dave Airlie
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Zanoni <paulo.r.zanoni@intel.com>
commit 196e077dc165a307efbd9e7569f81bbdbcf18f65 upstream.
If bit 0 of the features byte (0x18) is set to 0, then, according to
the EDID spec, "the display is non-continuous frequency (multi-mode)
and is only specified to accept the video timing formats that are
listed in Base EDID and certain Extension Blocks".
For more information, please see the EDID spec, check the notes of the
table that explains the "Feature Support" byte (18h) and also the
notes on the tables of the section that explains "Display Range Limits
& Additional Timing Description Definition (tag #FDh)".
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/drm_edid.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -1740,7 +1740,8 @@ int drm_add_edid_modes(struct drm_connec
num_modes += add_cvt_modes(connector, edid);
num_modes += add_standard_modes(connector, edid);
num_modes += add_established_modes(connector, edid);
- num_modes += add_inferred_modes(connector, edid);
+ if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF)
+ num_modes += add_inferred_modes(connector, edid);
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
edid_fixup_preferred(connector, quirks);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 080/153] drm/i915: disable shared panel fitter for pipe
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (78 preceding siblings ...)
2013-03-04 3:38 ` [ 079/153] drm: dont add inferred modes for monitors that dont support them Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 081/153] drm/i915: add missing \n to UTS_RELEASE in the error_state Ben Hutchings
` (74 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Mika Kuoppala, Mika Kuoppala, Andreas Sturmlechner,
Daniel Vetter
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
commit 24a1f16de97c4cf0029d9acd04be06db32208726 upstream.
If encoder is switched off by BIOS, but the panel fitter is left on,
we never try to turn off the panel fitter and leave it still attached
to the pipe - which can cause blurry output elsewhere.
Based on work by Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58867
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Tested-by: Andreas Sturmlechner <andreas.sturmlechner@gmail.com>
[danvet: Remove the redundant HAS_PCH_SPLIT check and add a tiny
comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/i915/intel_display.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3242,6 +3242,7 @@ static void i9xx_crtc_disable(struct drm
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
+ u32 pctl;
if (!intel_crtc->active)
return;
@@ -3257,6 +3258,13 @@ static void i9xx_crtc_disable(struct drm
intel_disable_plane(dev_priv, plane, pipe);
intel_disable_pipe(dev_priv, pipe);
+
+ /* Disable pannel fitter if it is on this pipe. */
+ pctl = I915_READ(PFIT_CONTROL);
+ if ((pctl & PFIT_ENABLE) &&
+ ((pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT) == pipe)
+ I915_WRITE(PFIT_CONTROL, 0);
+
intel_disable_pll(dev_priv, pipe);
intel_crtc->active = false;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 081/153] drm/i915: add missing \n to UTS_RELEASE in the error_state
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (79 preceding siblings ...)
2013-03-04 3:38 ` [ 080/153] drm/i915: disable shared panel fitter for pipe Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 082/153] drm/i915: Set i9xx sdvo clock limits according to specifications Ben Hutchings
` (73 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Jani Nikula, Chris Wilson, Daniel Vetter
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jani Nikula <jani.nikula@intel.com>
commit fdfa175d0a9cfa2082ce24e67e284e5acbba452a upstream.
Amending
commit 4518f611ba21ba165ea3714055938a8984a44ff9
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Jan 23 16:16:35 2013 +0100
drm/i915: dump UTS_RELEASE into the error_state
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/i915/i915_debugfs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -756,7 +756,7 @@ static int i915_error_state(struct seq_f
seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
error->time.tv_usec);
- seq_printf(m, "Kernel: " UTS_RELEASE);
+ seq_printf(m, "Kernel: " UTS_RELEASE "\n");
seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device);
seq_printf(m, "EIR: 0x%08x\n", error->eir);
seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 082/153] drm/i915: Set i9xx sdvo clock limits according to specifications
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (80 preceding siblings ...)
2013-03-04 3:38 ` [ 081/153] drm/i915: add missing \n to UTS_RELEASE in the error_state Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 083/153] intel/iommu: force writebuffer-flush quirk on Gen 4 Chipsets Ben Hutchings
` (72 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Patrik Jakobsson, Chris Wilson, Daniel Vetter
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
commit 4f7dfb6788dd022446847fbbfbe45e13bedb5be2 upstream.
The Intel PRM says the M1 and M2 divisors must be in the range of 10-20 and 5-9.
Since we do all calculations based on them being register values (which are
subtracted by 2) we need to specify them accordingly.
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/i915/intel_display.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -138,8 +138,8 @@ static const intel_limit_t intel_limits_
.vco = { .min = 1400000, .max = 2800000 },
.n = { .min = 1, .max = 6 },
.m = { .min = 70, .max = 120 },
- .m1 = { .min = 10, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ .m1 = { .min = 8, .max = 18 },
+ .m2 = { .min = 3, .max = 7 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 083/153] intel/iommu: force writebuffer-flush quirk on Gen 4 Chipsets
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (81 preceding siblings ...)
2013-03-04 3:38 ` [ 082/153] drm/i915: Set i9xx sdvo clock limits according to specifications Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 084/153] xen: close evtchn port if binding to irq fails Ben Hutchings
` (71 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Daniel Vetter, David Woodhouse, Sankaran, Rajesh
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 210561ffd72d00eccf12c0131b8024d5436bae95 upstream.
We already have the quirk entry for the mobile platform, but also
reports on some desktop versions. So be paranoid and set it
everywhere.
References: http://www.mail-archive.com/dri-devel@lists.freedesktop.org/msg33138.html
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Sankaran, Rajesh" <rajesh.sankaran@intel.com>
Reported-and-tested-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/iommu/intel-iommu.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4140,13 +4140,19 @@ static void __devinit quirk_iommu_rwbf(s
{
/*
* Mobile 4 Series Chipset neglects to set RWBF capability,
- * but needs it:
+ * but needs it. Same seems to hold for the desktop versions.
*/
printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_rwbf);
#define GGC 0x52
#define GGC_MEMORY_SIZE_MASK (0xf << 8)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 084/153] xen: close evtchn port if binding to irq fails
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (82 preceding siblings ...)
2013-03-04 3:38 ` [ 083/153] intel/iommu: force writebuffer-flush quirk on Gen 4 Chipsets Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 085/153] xen: Send spinlock IPI to all waiters Ben Hutchings
` (70 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Wei Liu, Konrad Rzeszutek Wilk
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Liu <wei.liu2@citrix.com>
commit e7e44e444876478d50630f57b0c31d29f6725020 upstream.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/xen/evtchn.c | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -269,6 +269,14 @@ static int evtchn_bind_to_user(struct pe
u->name, (void *)(unsigned long)port);
if (rc >= 0)
rc = 0;
+ else {
+ /* bind failed, should close the port now */
+ struct evtchn_close close;
+ close.port = port;
+ if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0)
+ BUG();
+ set_port_user(port, NULL);
+ }
return rc;
}
@@ -277,6 +285,8 @@ static void evtchn_unbind_from_user(stru
{
int irq = irq_from_evtchn(port);
+ BUG_ON(irq < 0);
+
unbind_from_irqhandler(irq, (void *)(unsigned long)port);
set_port_user(port, NULL);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 085/153] xen: Send spinlock IPI to all waiters
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (83 preceding siblings ...)
2013-03-04 3:38 ` [ 084/153] xen: close evtchn port if binding to irq fails Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 086/153] x86, efi: Make "noefi" really disable EFI runtime serivces Ben Hutchings
` (69 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Stefan Bader, Jan Beulich, Konrad Rzeszutek Wilk
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Bader <stefan.bader@canonical.com>
commit 76eaca031f0af2bb303e405986f637811956a422 upstream.
There is a loophole between Xen's current implementation of
pv-spinlocks and the scheduler. This was triggerable through
a testcase until v3.6 changed the TLB flushing code. The
problem potentially is still there just not observable in the
same way.
What could happen was (is):
1. CPU n tries to schedule task x away and goes into a slow
wait for the runq lock of CPU n-# (must be one with a lower
number).
2. CPU n-#, while processing softirqs, tries to balance domains
and goes into a slow wait for its own runq lock (for updating
some records). Since this is a spin_lock_irqsave in softirq
context, interrupts will be re-enabled for the duration of
the poll_irq hypercall used by Xen.
3. Before the runq lock of CPU n-# is unlocked, CPU n-1 receives
an interrupt (e.g. endio) and when processing the interrupt,
tries to wake up task x. But that is in schedule and still
on_cpu, so try_to_wake_up goes into a tight loop.
4. The runq lock of CPU n-# gets unlocked, but the message only
gets sent to the first waiter, which is CPU n-# and that is
busily stuck.
5. CPU n-# never returns from the nested interruption to take and
release the lock because the scheduler uses a busy wait.
And CPU n never finishes the task migration because the unlock
notification only went to CPU n-#.
To avoid this and since the unlocking code has no real sense of
which waiter is best suited to grab the lock, just send the IPI
to all of them. This causes the waiters to return from the hyper-
call (those not interrupted at least) and do active spinlocking.
BugLink: http://bugs.launchpad.net/bugs/1011792
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/xen/spinlock.c | 1 -
1 file changed, 1 deletion(-)
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -328,7 +328,6 @@ static noinline void xen_spin_unlock_slo
if (per_cpu(lock_spinners, cpu) == xl) {
ADD_STATS(released_slow_kicked, 1);
xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
- break;
}
}
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 086/153] x86, efi: Make "noefi" really disable EFI runtime serivces
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (84 preceding siblings ...)
2013-03-04 3:38 ` [ 085/153] xen: Send spinlock IPI to all waiters Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 087/153] ALSA: usb: Fix Processing Unit Descriptor parsers Ben Hutchings
` (68 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Matt Fleming, Walt Nelson Jr, Satoru Takeuchi,
H. Peter Anvin
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matt Fleming <matt.fleming@intel.com>
commit fb834c7acc5e140cf4f9e86da93a66de8c0514da upstream.
commit 1de63d60cd5b ("efi: Clear EFI_RUNTIME_SERVICES rather than
EFI_BOOT by "noefi" boot parameter") attempted to make "noefi" true to
its documentation and disable EFI runtime services to prevent the
bricking bug described in commit e0094244e41c ("samsung-laptop:
Disable on EFI hardware"). However, it's not possible to clear
EFI_RUNTIME_SERVICES from an early param function because
EFI_RUNTIME_SERVICES is set in efi_init() *after* parse_early_param().
This resulted in "noefi" effectively becoming a no-op and no longer
providing users with a way to disable EFI, which is bad for those
users that have buggy machines.
Reported-by: Walt Nelson Jr <walt0924@gmail.com>
Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1361392572-25657-1-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
[bwh: Backported to 3.2: efi_runtime_init() is not a separate function,
so put a whole set of statements in an if (!disable_runtime) block]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -83,9 +83,10 @@ int efi_enabled(int facility)
}
EXPORT_SYMBOL(efi_enabled);
+static bool disable_runtime = false;
static int __init setup_noefi(char *arg)
{
- clear_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
+ disable_runtime = true;
return 0;
}
early_param("noefi", setup_noefi);
@@ -549,35 +550,37 @@ void __init efi_init(void)
set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
- /*
- * Check out the runtime services table. We need to map
- * the runtime services table so that we can grab the physical
- * address of several of the EFI runtime functions, needed to
- * set the firmware into virtual mode.
- */
- runtime = early_ioremap((unsigned long)efi.systab->runtime,
- sizeof(efi_runtime_services_t));
- if (runtime != NULL) {
- /*
- * We will only need *early* access to the following
- * two EFI runtime services before set_virtual_address_map
- * is invoked.
- */
- efi_phys.get_time = (efi_get_time_t *)runtime->get_time;
- efi_phys.set_virtual_address_map =
- (efi_set_virtual_address_map_t *)
- runtime->set_virtual_address_map;
+ if (!disable_runtime) {
/*
- * Make efi_get_time can be called before entering
- * virtual mode.
+ * Check out the runtime services table. We need to map
+ * the runtime services table so that we can grab the physical
+ * address of several of the EFI runtime functions, needed to
+ * set the firmware into virtual mode.
*/
- efi.get_time = phys_efi_get_time;
-
- set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
- } else
- printk(KERN_ERR "Could not map the EFI runtime service "
- "table!\n");
- early_iounmap(runtime, sizeof(efi_runtime_services_t));
+ runtime = early_ioremap((unsigned long)efi.systab->runtime,
+ sizeof(efi_runtime_services_t));
+ if (runtime != NULL) {
+ /*
+ * We will only need *early* access to the following
+ * two EFI runtime services before set_virtual_address_map
+ * is invoked.
+ */
+ efi_phys.get_time = (efi_get_time_t *)runtime->get_time;
+ efi_phys.set_virtual_address_map =
+ (efi_set_virtual_address_map_t *)
+ runtime->set_virtual_address_map;
+ /*
+ * Make efi_get_time can be called before entering
+ * virtual mode.
+ */
+ efi.get_time = phys_efi_get_time;
+
+ set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
+ } else
+ printk(KERN_ERR "Could not map the EFI runtime service "
+ "table!\n");
+ early_iounmap(runtime, sizeof(efi_runtime_services_t));
+ }
/* Map the EFI memory map */
memmap.map = early_ioremap((unsigned long)memmap.phys_map,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 087/153] ALSA: usb: Fix Processing Unit Descriptor parsers
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (85 preceding siblings ...)
2013-03-04 3:38 ` [ 086/153] x86, efi: Make "noefi" really disable EFI runtime serivces Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 088/153] posix-timer: Dont call idr_find() with out-of-range ID Ben Hutchings
` (67 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Pawel Moll, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pawel Moll <mail@pawelmoll.com>
commit b531f81b0d70ffbe8d70500512483227cc532608 upstream.
Commit 99fc86450c439039d2ef88d06b222fd51a779176 "ALSA: usb-mixer:
parse descriptors with structs" introduced a set of useful parsers
for descriptors. Unfortunately the parses for the Processing Unit
Descriptor came with a very subtle bug...
Functions uac_processing_unit_iProcessing() and
uac_processing_unit_specific() were indexing the baSourceID array
forgetting the fields before the iProcessing and process-specific
descriptors.
The problem was observed with Sound Blaster Extigy mixer,
where nNrModes in Up/Down-mix Processing Unit Descriptor
was accessed at offset 10 of the descriptor (value 0)
instead of offset 15 (value 7). In result the resulting
control had interesting limit values:
Simple mixer control 'Channel Routing Mode Select',0
Capabilities: volume volume-joined penum
Playback channels: Mono
Capture channels: Mono
Limits: 0 - -1
Mono: -1 [100%]
Fixed by starting from the bmControls, which was calculated
correctly, instead of baSourceID.
Now the mentioned control is fine:
Simple mixer control 'Channel Routing Mode Select',0
Capabilities: volume volume-joined penum
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 6
Mono: 0 [0%]
Signed-off-by: Pawel Moll <mail@pawelmoll.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/linux/usb/audio.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -384,14 +384,16 @@ static inline __u8 uac_processing_unit_i
int protocol)
{
__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return desc->baSourceID[desc->bNrInPins + control_size];
+ return *(uac_processing_unit_bmControls(desc, protocol)
+ + control_size);
}
static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
int protocol)
{
__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return &desc->baSourceID[desc->bNrInPins + control_size + 1];
+ return uac_processing_unit_bmControls(desc, protocol)
+ + control_size + 1;
}
/* 4.5.2 Class-Specific AS Interface Descriptor */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 088/153] posix-timer: Dont call idr_find() with out-of-range ID
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (86 preceding siblings ...)
2013-03-04 3:38 ` [ 087/153] ALSA: usb: Fix Processing Unit Descriptor parsers Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 089/153] inotify: remove broken mask checks causing unmount to be EINVAL Ben Hutchings
` (66 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Tejun Heo, Sasha Levin, Thomas Gleixner
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit e182bb38d7db7494fa5dcd82da17fe0dedf60ecf upstream.
When idr_find() was fed a negative ID, it used to look up the ID
ignoring the sign bit before recent ("idr: remove MAX_IDR_MASK and
move left MAX_IDR_* into idr.c") patch. Now a negative ID triggers
a WARN_ON_ONCE().
__lock_timer() feeds timer_id from userland directly to idr_find()
without sanitizing it which can trigger the above malfunctions. Add a
range check on @timer_id before invoking idr_find() in __lock_timer().
While timer_t is defined as int by all archs at the moment, Andrew
worries that it may be defined as a larger type later on. Make the
test cover larger integers too so that it at least is guaranteed to
not return the wrong timer.
Note that WARN_ON_ONCE() in idr_find() on id < 0 is transitional
precaution while moving away from ignoring MSB. Once it's gone we can
remove the guard as long as timer_t isn't larger than int.
Signed-off-by: Tejun Heo <tj@kernel.org>nnn
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130220232412.GL3570@htj.dyndns.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/posix-timers.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -639,6 +639,13 @@ static struct k_itimer *__lock_timer(tim
{
struct k_itimer *timr;
+ /*
+ * timer_t could be any type >= int and we want to make sure any
+ * @timer_id outside positive int range fails lookup.
+ */
+ if ((unsigned long long)timer_id > INT_MAX)
+ return NULL;
+
rcu_read_lock();
timr = idr_find(&posix_timers_id, (int)timer_id);
if (timr) {
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 089/153] inotify: remove broken mask checks causing unmount to be EINVAL
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (87 preceding siblings ...)
2013-03-04 3:38 ` [ 088/153] posix-timer: Dont call idr_find() with out-of-range ID Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 090/153] fs/block_dev.c: page cache wrongly left invalidated after revalidate_disk() Ben Hutchings
` (65 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jim Somerville, Paul Gortmaker, Jerome Marchand,
John McCutchan, Robert Love, Eric Paris, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jim Somerville <Jim.Somerville@windriver.com>
commit 676a0675cf9200ac047fb50825f80867b3bb733b upstream.
Running the command:
inotifywait -e unmount /mnt/disk
immediately aborts with a -EINVAL return code. This is however a valid
parameter. This abort occurs only if unmount is the sole event
parameter. If other event parameters are supplied, then the unmount
event wait will work.
The problem was introduced by commit 44b350fc23e ("inotify: Fix mask
checks"). In that commit, it states:
The mask checks in inotify_update_existing_watch() and
inotify_new_watch() are useless because inotify_arg_to_mask()
sets FS_IN_IGNORED and FS_EVENT_ON_CHILD bits anyway.
But instead of removing the useless checks, it did this:
mask = inotify_arg_to_mask(arg);
- if (unlikely(!mask))
+ if (unlikely(!(mask & IN_ALL_EVENTS)))
return -EINVAL;
The problem is that IN_ALL_EVENTS doesn't include IN_UNMOUNT, and other
parts of the code keep IN_UNMOUNT separate from IN_ALL_EVENTS. So the
check should be:
if (unlikely(!(mask & (IN_ALL_EVENTS | IN_UNMOUNT))))
But inotify_arg_to_mask(arg) always sets the IN_UNMOUNT bit in the mask
anyway, so the check is always going to pass and thus should simply be
removed. Also note that inotify_arg_to_mask completely controls what
mask bits get set from arg, there's no way for invalid bits to get
enabled there.
Lets fix it by simply removing the useless broken checks.
Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/notify/inotify/inotify_user.c | 4 ----
1 file changed, 4 deletions(-)
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -579,8 +579,6 @@ static int inotify_update_existing_watch
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!(mask & IN_ALL_EVENTS)))
- return -EINVAL;
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
@@ -632,8 +630,6 @@ static int inotify_new_watch(struct fsno
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!(mask & IN_ALL_EVENTS)))
- return -EINVAL;
tmp_i_mark = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
if (unlikely(!tmp_i_mark))
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 090/153] fs/block_dev.c: page cache wrongly left invalidated after revalidate_disk()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (88 preceding siblings ...)
2013-03-04 3:38 ` [ 089/153] inotify: remove broken mask checks causing unmount to be EINVAL Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 091/153] ocfs2: unlock super lock if lockres refresh failed Ben Hutchings
` (64 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, MITSUNARI Shigeo, Al Viro, Jeff Moyer, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: MITSUNARI Shigeo <herumi@nifty.com>
commit 7630b661da330b35dd57b6f5d6d62b386f2dd751 upstream.
We found that bdev->bd_invalidated was left set once revalidate_disk()
is called, which results in page cache flush every time that device is
open.
Specifically, we found this problem in MD block device. Once we resize
a MD device, mdadm --monitor periodically flush all page cache for that
device every 60 or 1000 seconds when it opens the device.
This bug lies since at least 3.2.0 till the latest kernel(3.6.2). Patch
is attached.
The following steps will reproduce the problem.
1. prepair a block device (eg /dev/sdb).
2. create two partitions:
sudo parted /dev/sdb
mklabel gpt
mkpart primary 0% 50%
mkpart primary 50% 100%
3. create a md device.
sudo mdadm -C /dev/md/hoge -l 1 -n 2 -e 1.2 --assume-clean --auto=md --symlink=no /dev/sdb1 /dev/sdb2
4. create file system and mount it
sudo mkfs.ext3 /dev/md/hoge
sudo mkdir /mnt/test
sudo mount /dev/md/hoge /mnt/test
5. try to resize the device
sudo mdadm -G /dev/md/hoge --size=max
6. create a file to fill file cache.
sudo dd if=/dev/urandom of=/mnt/test/data bs=1M count=10
and verify the current status of file by free command.
7. mdadm monitor will open the md device every 1000 seconds and you
will find all file cache on the device are cleared.
The timing can be reduced by the following steps.
a) kill mdadm and restart it with --delay option
/sbin/mdadm --monitor --delay=30 --pid-file /var/run/mdadm/monitor.pid --daemonise --scan --syslog
or open the md device directly.
sudo dd if=/dev/md/hoge of=/dev/null bs=4096 count=1
Signed-off-by: MITSUNARI Shigeo <herumi@nifty.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/block_dev.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1024,6 +1024,7 @@ int revalidate_disk(struct gendisk *disk
mutex_lock(&bdev->bd_mutex);
check_disk_size_change(disk, bdev);
+ bdev->bd_invalidated = 0;
mutex_unlock(&bdev->bd_mutex);
bdput(bdev);
return ret;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 091/153] ocfs2: unlock super lock if lockres refresh failed
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (89 preceding siblings ...)
2013-03-04 3:38 ` [ 090/153] fs/block_dev.c: page cache wrongly left invalidated after revalidate_disk() Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 092/153] drivers/video/backlight/adp88?0_bl.c: fix resume Ben Hutchings
` (63 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Junxiao Bi, Joel Becker, Mark Fasheh, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Junxiao Bi <junxiao.bi@oracle.com>
commit 3278bb748d2437eb1464765f36429e5d6aa91c38 upstream.
If lockres refresh failed, the super lock will never be released which
will cause some processes on other cluster nodes hung forever.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ocfs2/dlmglue.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2545,6 +2545,7 @@ int ocfs2_super_lock(struct ocfs2_super
* everything is up to the caller :) */
status = ocfs2_should_refresh_lock_res(lockres);
if (status < 0) {
+ ocfs2_cluster_unlock(osb, lockres, level);
mlog_errno(status);
goto bail;
}
@@ -2553,8 +2554,10 @@ int ocfs2_super_lock(struct ocfs2_super
ocfs2_complete_lock_res_refresh(lockres, status);
- if (status < 0)
+ if (status < 0) {
+ ocfs2_cluster_unlock(osb, lockres, level);
mlog_errno(status);
+ }
ocfs2_track_lock_refresh(lockres);
}
bail:
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 092/153] drivers/video/backlight/adp88?0_bl.c: fix resume
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (90 preceding siblings ...)
2013-03-04 3:38 ` [ 091/153] ocfs2: unlock super lock if lockres refresh failed Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable Ben Hutchings
` (62 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Lars-Peter Clausen, Michael Hennerich, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <lars@metafoo.de>
commit 5eb02c01bd1f3ef195989ab05e835e2b0711b5a9 upstream.
Clearing the NSTBY bit in the control register also automatically clears
the BLEN bit. So we need to make sure to set it again during resume,
otherwise the backlight will stay off.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/video/backlight/adp8860_bl.c | 2 +-
drivers/video/backlight/adp8870_bl.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -791,7 +791,7 @@ static int adp8860_i2c_suspend(struct i2
static int adp8860_i2c_resume(struct i2c_client *client)
{
- adp8860_set_bits(client, ADP8860_MDCR, NSTBY);
+ adp8860_set_bits(client, ADP8860_MDCR, NSTBY | BLEN);
return 0;
}
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -965,7 +965,7 @@ static int adp8870_i2c_suspend(struct i2
static int adp8870_i2c_resume(struct i2c_client *client)
{
- adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
+ adp8870_set_bits(client, ADP8870_MDCR, NSTBY | BLEN);
return 0;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (91 preceding siblings ...)
2013-03-04 3:38 ` [ 092/153] drivers/video/backlight/adp88?0_bl.c: fix resume Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 5:13 ` Ben Hutchings
2013-03-04 3:38 ` [ 094/153] ext4: fix free clusters calculation in bigalloc filesystem Ben Hutchings
` (61 subsequent siblings)
154 siblings, 1 reply; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, David Henningsson, Takashi Iwai
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Henningsson <david.henningsson@canonical.com>
commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.
Just as for analog codecs, a jack that isn't suitable for detection
(in this case, NO_PRESENCE was set) should be a phantom Jack
instead of a normal one.
Thanks to Raymond Yau for spotting.
BugLink: https://bugs.launchpad.net/bugs/961286
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
sound/pci/hda/patch_hdmi.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1228,6 +1228,9 @@ static int generic_hdmi_build_jack(struc
int pcmdev = spec->pcm_rec[pin_idx].device;
snprintf(hdmi_str, sizeof(hdmi_str), "HDMI/DP,pcm=%d", pcmdev);
+ if (!is_jack_detectable(codec, per_pin->pin_nid))
+ strncat(hdmi_str, " Phantom",
+ sizeof(hdmi_str) - strlen(hdmi_str) - 1);
err = snd_hda_input_jack_add(codec, per_pin->pin_nid,
SND_JACK_VIDEOOUT, pcmdev > 0 ? hdmi_str : NULL);
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable
2013-03-04 3:38 ` [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable Ben Hutchings
@ 2013-03-04 5:13 ` Ben Hutchings
2013-03-04 7:46 ` David Henningsson
0 siblings, 1 reply; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 5:13 UTC (permalink / raw)
To: David Henningsson; +Cc: stable, akpm, LKML, Takashi Iwai
[-- Attachment #1: Type: text/plain, Size: 1831 bytes --]
On Mon, 2013-03-04 at 03:38 +0000, Ben Hutchings wrote:
> 3.2-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: David Henningsson <david.henningsson@canonical.com>
>
> commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.
>
> Just as for analog codecs, a jack that isn't suitable for detection
> (in this case, NO_PRESENCE was set) should be a phantom Jack
> instead of a normal one.
>
> Thanks to Raymond Yau for spotting.
>
> BugLink: https://bugs.launchpad.net/bugs/961286
> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> [bwh: Backported to 3.2: adjust context]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
David, do I need to change this further for 3.2.y?
Ben.
> ---
> sound/pci/hda/patch_hdmi.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> --- a/sound/pci/hda/patch_hdmi.c
> +++ b/sound/pci/hda/patch_hdmi.c
> @@ -1228,6 +1228,9 @@ static int generic_hdmi_build_jack(struc
> int pcmdev = spec->pcm_rec[pin_idx].device;
>
> snprintf(hdmi_str, sizeof(hdmi_str), "HDMI/DP,pcm=%d", pcmdev);
> + if (!is_jack_detectable(codec, per_pin->pin_nid))
> + strncat(hdmi_str, " Phantom",
> + sizeof(hdmi_str) - strlen(hdmi_str) - 1);
>
> err = snd_hda_input_jack_add(codec, per_pin->pin_nid,
> SND_JACK_VIDEOOUT, pcmdev > 0 ? hdmi_str : NULL);
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread
* Re: [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable
2013-03-04 5:13 ` Ben Hutchings
@ 2013-03-04 7:46 ` David Henningsson
2013-03-04 7:48 ` Greg Kroah-Hartman
2013-03-04 13:57 ` Ben Hutchings
0 siblings, 2 replies; 172+ messages in thread
From: David Henningsson @ 2013-03-04 7:46 UTC (permalink / raw)
To: Ben Hutchings; +Cc: stable, akpm, LKML, Takashi Iwai, Greg Kroah-Hartman
On 03/04/2013 06:13 AM, Ben Hutchings wrote:
> On Mon, 2013-03-04 at 03:38 +0000, Ben Hutchings wrote:
>> 3.2-stable review patch. If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: David Henningsson <david.henningsson@canonical.com>
>>
>> commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.
>>
>> Just as for analog codecs, a jack that isn't suitable for detection
>> (in this case, NO_PRESENCE was set) should be a phantom Jack
>> instead of a normal one.
>>
>> Thanks to Raymond Yau for spotting.
>>
>> BugLink: https://bugs.launchpad.net/bugs/961286
>> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
>> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
>> Signed-off-by: Takashi Iwai <tiwai@suse.de>
>> [bwh: Backported to 3.2: adjust context]
>> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
>
> David, do I need to change this further for 3.2.y?
Greg and Ben,
Given some thought, the definition of is_jack_detectable has
changed/improved over kernels. Therefore I think it's safer not to apply
the patch at all for kernels earlier than 3.6. Let's revisit this
decision if there's actually a user demand for this fix.
>
> Ben.
>
>> ---
>> sound/pci/hda/patch_hdmi.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> --- a/sound/pci/hda/patch_hdmi.c
>> +++ b/sound/pci/hda/patch_hdmi.c
>> @@ -1228,6 +1228,9 @@ static int generic_hdmi_build_jack(struc
>> int pcmdev = spec->pcm_rec[pin_idx].device;
>>
>> snprintf(hdmi_str, sizeof(hdmi_str), "HDMI/DP,pcm=%d", pcmdev);
>> + if (!is_jack_detectable(codec, per_pin->pin_nid))
>> + strncat(hdmi_str, " Phantom",
>> + sizeof(hdmi_str) - strlen(hdmi_str) - 1);
>>
>> err = snd_hda_input_jack_add(codec, per_pin->pin_nid,
>> SND_JACK_VIDEOOUT, pcmdev > 0 ? hdmi_str : NULL);
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe stable" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
^ permalink raw reply [flat|nested] 172+ messages in thread
* Re: [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable
2013-03-04 7:46 ` David Henningsson
@ 2013-03-04 7:48 ` Greg Kroah-Hartman
2013-03-04 7:55 ` David Henningsson
2013-03-04 13:57 ` Ben Hutchings
1 sibling, 1 reply; 172+ messages in thread
From: Greg Kroah-Hartman @ 2013-03-04 7:48 UTC (permalink / raw)
To: David Henningsson; +Cc: Ben Hutchings, stable, akpm, LKML, Takashi Iwai
On Mon, Mar 04, 2013 at 08:46:16AM +0100, David Henningsson wrote:
> On 03/04/2013 06:13 AM, Ben Hutchings wrote:
> >On Mon, 2013-03-04 at 03:38 +0000, Ben Hutchings wrote:
> >>3.2-stable review patch. If anyone has any objections, please let me know.
> >>
> >>------------------
> >>
> >>From: David Henningsson <david.henningsson@canonical.com>
> >>
> >>commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.
> >>
> >>Just as for analog codecs, a jack that isn't suitable for detection
> >>(in this case, NO_PRESENCE was set) should be a phantom Jack
> >>instead of a normal one.
> >>
> >>Thanks to Raymond Yau for spotting.
> >>
> >>BugLink: https://bugs.launchpad.net/bugs/961286
> >>BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
> >>Signed-off-by: David Henningsson <david.henningsson@canonical.com>
> >>Signed-off-by: Takashi Iwai <tiwai@suse.de>
> >>[bwh: Backported to 3.2: adjust context]
> >>Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> >
> >David, do I need to change this further for 3.2.y?
>
> Greg and Ben,
>
> Given some thought, the definition of is_jack_detectable has
> changed/improved over kernels. Therefore I think it's safer not to
> apply the patch at all for kernels earlier than 3.6. Let's revisit
> this decision if there's actually a user demand for this fix.
So should I revert this in the next 3.4 release, as it's now in the
3.4.35 release.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 172+ messages in thread
* Re: [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable
2013-03-04 7:48 ` Greg Kroah-Hartman
@ 2013-03-04 7:55 ` David Henningsson
0 siblings, 0 replies; 172+ messages in thread
From: David Henningsson @ 2013-03-04 7:55 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: Ben Hutchings, stable, akpm, LKML, Takashi Iwai
On 03/04/2013 08:48 AM, Greg Kroah-Hartman wrote:
> On Mon, Mar 04, 2013 at 08:46:16AM +0100, David Henningsson wrote:
>> On 03/04/2013 06:13 AM, Ben Hutchings wrote:
>>> On Mon, 2013-03-04 at 03:38 +0000, Ben Hutchings wrote:
>>>> 3.2-stable review patch. If anyone has any objections, please let me know.
>>>>
>>>> ------------------
>>>>
>>>> From: David Henningsson <david.henningsson@canonical.com>
>>>>
>>>> commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.
>>>>
>>>> Just as for analog codecs, a jack that isn't suitable for detection
>>>> (in this case, NO_PRESENCE was set) should be a phantom Jack
>>>> instead of a normal one.
>>>>
>>>> Thanks to Raymond Yau for spotting.
>>>>
>>>> BugLink: https://bugs.launchpad.net/bugs/961286
>>>> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
>>>> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
>>>> Signed-off-by: Takashi Iwai <tiwai@suse.de>
>>>> [bwh: Backported to 3.2: adjust context]
>>>> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
>>>
>>> David, do I need to change this further for 3.2.y?
>>
>> Greg and Ben,
>>
>> Given some thought, the definition of is_jack_detectable has
>> changed/improved over kernels. Therefore I think it's safer not to
>> apply the patch at all for kernels earlier than 3.6. Let's revisit
>> this decision if there's actually a user demand for this fix.
>
> So should I revert this in the next 3.4 release, as it's now in the
> 3.4.35 release.
That seems to be the safest option; given that we don't get people with
the actual hardware to test the different options and report back which
one works best.
Sorry for the late reply.
--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic
^ permalink raw reply [flat|nested] 172+ messages in thread
* Re: [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable
2013-03-04 7:46 ` David Henningsson
2013-03-04 7:48 ` Greg Kroah-Hartman
@ 2013-03-04 13:57 ` Ben Hutchings
1 sibling, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 13:57 UTC (permalink / raw)
To: David Henningsson; +Cc: stable, akpm, LKML, Takashi Iwai, Greg Kroah-Hartman
[-- Attachment #1: Type: text/plain, Size: 1517 bytes --]
On Mon, 2013-03-04 at 08:46 +0100, David Henningsson wrote:
> On 03/04/2013 06:13 AM, Ben Hutchings wrote:
> > On Mon, 2013-03-04 at 03:38 +0000, Ben Hutchings wrote:
> >> 3.2-stable review patch. If anyone has any objections, please let me know.
> >>
> >> ------------------
> >>
> >> From: David Henningsson <david.henningsson@canonical.com>
> >>
> >> commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.
> >>
> >> Just as for analog codecs, a jack that isn't suitable for detection
> >> (in this case, NO_PRESENCE was set) should be a phantom Jack
> >> instead of a normal one.
> >>
> >> Thanks to Raymond Yau for spotting.
> >>
> >> BugLink: https://bugs.launchpad.net/bugs/961286
> >> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
> >> Signed-off-by: David Henningsson <david.henningsson@canonical.com>
> >> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> >> [bwh: Backported to 3.2: adjust context]
> >> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> >
> > David, do I need to change this further for 3.2.y?
>
> Greg and Ben,
>
> Given some thought, the definition of is_jack_detectable has
> changed/improved over kernels. Therefore I think it's safer not to apply
> the patch at all for kernels earlier than 3.6. Let's revisit this
> decision if there's actually a user demand for this fix.
OK, I've dropped this from the 3.2.y queue.
Ben.
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread
* [ 094/153] ext4: fix free clusters calculation in bigalloc filesystem
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (92 preceding siblings ...)
2013-03-04 3:38 ` [ 093/153] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 095/153] fs: Fix possible use-after-free with AIO Ben Hutchings
` (60 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Lukas Czerner, Theodore Tso
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Czerner <lczerner@redhat.com>
commit 304e220f0879198b1f5309ad6f0be862b4009491 upstream.
ext4_has_free_clusters() should tell us whether there is enough free
clusters to allocate, however number of free clusters in the file system
is converted to blocks using EXT4_C2B() which is not only wrong use of
the macro (we should have used EXT4_NUM_B2C) but it's also completely
wrong concept since everything else is in cluster units.
Moreover when calculating number of root clusters we should be using
macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be
off by one. However r_blocks_count should always be a multiple of the
cluster ratio so doing a plain bit shift should be enough here. We
avoid using EXT4_B2C() because it's confusing.
As a result of the first problem number of free clusters is much bigger
than it should have been and ext4_has_free_clusters() would return 1 even
if there is really not enough free clusters available.
Fix this by removing the EXT4_C2B() conversion of free clusters and
using bit shift when calculating number of root clusters. This bug
affects number of xfstests tests covering file system ENOSPC situation
handling. With this patch most of the ENOSPC problems with bigalloc file
system disappear, especially the errors caused by delayed allocation not
having enough space when the actual allocation is finally requested.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/balloc.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -420,11 +420,16 @@ static int ext4_has_free_clusters(struct
free_clusters = percpu_counter_read_positive(fcc);
dirty_clusters = percpu_counter_read_positive(dcc);
- root_clusters = EXT4_B2C(sbi, ext4_r_blocks_count(sbi->s_es));
+
+ /*
+ * r_blocks_count should always be multiple of the cluster ratio so
+ * we are safe to do a plane bit shift only.
+ */
+ root_clusters = ext4_r_blocks_count(sbi->s_es) >> sbi->s_cluster_bits;
if (free_clusters - (nclusters + root_clusters + dirty_clusters) <
EXT4_FREECLUSTERS_WATERMARK) {
- free_clusters = EXT4_C2B(sbi, percpu_counter_sum_positive(fcc));
+ free_clusters = percpu_counter_sum_positive(fcc);
dirty_clusters = percpu_counter_sum_positive(dcc);
}
/* Check whether we have space after accounting for current
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 095/153] fs: Fix possible use-after-free with AIO
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (93 preceding siblings ...)
2013-03-04 3:38 ` [ 094/153] ext4: fix free clusters calculation in bigalloc filesystem Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 096/153] powerpc/kexec: Disable hard IRQ before kexec Ben Hutchings
` (59 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jan Kara, Christoph Hellwig, Jens Axboe, Jeff Moyer,
Al Viro
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <jack@suse.cz>
commit 54c807e71d5ac59dee56c685f2b66e27cd54c475 upstream.
Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.
CC: Christoph Hellwig <hch@infradead.org>
CC: Jens Axboe <axboe@kernel.dk>
CC: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/direct-io.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -304,9 +304,9 @@ static ssize_t dio_complete(struct dio *
dio->end_io(dio->iocb, offset, transferred,
dio->private, ret, is_async);
} else {
+ inode_dio_done(dio->inode);
if (is_async)
aio_complete(dio->iocb, ret, 0);
- inode_dio_done(dio->inode);
}
return ret;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 096/153] powerpc/kexec: Disable hard IRQ before kexec
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (94 preceding siblings ...)
2013-03-04 3:38 ` [ 095/153] fs: Fix possible use-after-free with AIO Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 097/153] mm: mmu_notifier: have mmu_notifiers use a global SRCU so they may safely schedule Ben Hutchings
` (58 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Phileas Fogg, Benjamin Herrenschmidt
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phileas Fogg <phileas-fogg@mail.ru>
commit 8520e443aa56cc157b015205ea53e7b9fc831291 upstream.
Disable hard IRQ before kexec a new kernel image.
Not doing it can result in corrupted data in the memory segments
reserved for the new kernel.
Signed-off-by: Phileas Fogg <phileas-fogg@mail.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/powerpc/kernel/machine_kexec_64.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -162,6 +162,8 @@ static int kexec_all_irq_disabled = 0;
static void kexec_smp_down(void *arg)
{
local_irq_disable();
+ hard_irq_disable();
+
mb(); /* make sure our irqs are disabled before we say they are */
get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
while(kexec_all_irq_disabled == 0)
@@ -244,6 +246,8 @@ static void kexec_prepare_cpus(void)
wake_offline_cpus();
smp_call_function(kexec_smp_down, NULL, /* wait */0);
local_irq_disable();
+ hard_irq_disable();
+
mb(); /* make sure IRQs are disabled before we say they are */
get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
@@ -281,6 +285,7 @@ static void kexec_prepare_cpus(void)
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 0);
local_irq_disable();
+ hard_irq_disable();
}
#endif /* SMP */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 097/153] mm: mmu_notifier: have mmu_notifiers use a global SRCU so they may safely schedule
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (95 preceding siblings ...)
2013-03-04 3:38 ` [ 096/153] powerpc/kexec: Disable hard IRQ before kexec Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 098/153] mm: mmu_notifier: make the mmu_notifier srcu static Ben Hutchings
` (57 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Sagi Grimberg, Andrea Arcangeli, Peter Zijlstra,
Haggai Eran, Paul E. McKenney, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sagi Grimberg <sagig@mellanox.co.il>
commit 21a92735f660eaecf69a6f2e777f18463760ec32 upstream.
With an RCU based mmu_notifier implementation, any callout to
mmu_notifier_invalidate_range_{start,end}() or
mmu_notifier_invalidate_page() would not be allowed to call schedule()
as that could potentially allow a modification to the mmu_notifier
structure while it is currently being used.
Since srcu allocs 4 machine words per instance per cpu, we may end up
with memory exhaustion if we use srcu per mm. So all mms share a global
srcu. Note that during large mmu_notifier activity exit & unregister
paths might hang for longer periods, but it is tolerable for current
mmu_notifier clients.
Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/linux/mmu_notifier.h | 1 +
mm/mmu_notifier.c | 73 +++++++++++++++++++++++++++---------------
2 files changed, 49 insertions(+), 25 deletions(-)
--- a/include/linux/mmu_notifier.h
+++ b/include/linux/mmu_notifier.h
@@ -4,6 +4,7 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/mm_types.h>
+#include <linux/srcu.h>
struct mmu_notifier;
struct mmu_notifier_ops;
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -14,10 +14,14 @@
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/err.h>
+#include <linux/srcu.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
#include <linux/slab.h>
+/* global SRCU for all MMs */
+struct srcu_struct srcu;
+
/*
* This function can't run concurrently against mmu_notifier_register
* because mm->mm_users > 0 during mmu_notifier_register and exit_mmap
@@ -25,8 +29,8 @@
* in parallel despite there being no task using this mm any more,
* through the vmas outside of the exit_mmap context, such as with
* vmtruncate. This serializes against mmu_notifier_unregister with
- * the mmu_notifier_mm->lock in addition to RCU and it serializes
- * against the other mmu notifiers with RCU. struct mmu_notifier_mm
+ * the mmu_notifier_mm->lock in addition to SRCU and it serializes
+ * against the other mmu notifiers with SRCU. struct mmu_notifier_mm
* can't go away from under us as exit_mmap holds an mm_count pin
* itself.
*/
@@ -34,12 +38,13 @@ void __mmu_notifier_release(struct mm_st
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
/*
* RCU here will block mmu_notifier_unregister until
* ->release returns.
*/
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist)
/*
* if ->release runs before mmu_notifier_unregister it
@@ -50,7 +55,7 @@ void __mmu_notifier_release(struct mm_st
*/
if (mn->ops->release)
mn->ops->release(mn, mm);
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
spin_lock(&mm->mmu_notifier_mm->lock);
while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
@@ -68,7 +73,7 @@ void __mmu_notifier_release(struct mm_st
spin_unlock(&mm->mmu_notifier_mm->lock);
/*
- * synchronize_rcu here prevents mmu_notifier_release to
+ * synchronize_srcu here prevents mmu_notifier_release to
* return to exit_mmap (which would proceed freeing all pages
* in the mm) until the ->release method returns, if it was
* invoked by mmu_notifier_unregister.
@@ -76,7 +81,7 @@ void __mmu_notifier_release(struct mm_st
* The mmu_notifier_mm can't go away from under us because one
* mm_count is hold by exit_mmap.
*/
- synchronize_rcu();
+ synchronize_srcu(&srcu);
}
/*
@@ -89,14 +94,14 @@ int __mmu_notifier_clear_flush_young(str
{
struct mmu_notifier *mn;
struct hlist_node *n;
- int young = 0;
+ int young = 0, id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->clear_flush_young)
young |= mn->ops->clear_flush_young(mn, mm, address);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
return young;
}
@@ -106,9 +111,9 @@ int __mmu_notifier_test_young(struct mm_
{
struct mmu_notifier *mn;
struct hlist_node *n;
- int young = 0;
+ int young = 0, id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->test_young) {
young = mn->ops->test_young(mn, mm, address);
@@ -116,7 +121,7 @@ int __mmu_notifier_test_young(struct mm_
break;
}
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
return young;
}
@@ -126,8 +131,9 @@ void __mmu_notifier_change_pte(struct mm
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->change_pte)
mn->ops->change_pte(mn, mm, address, pte);
@@ -138,7 +144,7 @@ void __mmu_notifier_change_pte(struct mm
else if (mn->ops->invalidate_page)
mn->ops->invalidate_page(mn, mm, address);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
void __mmu_notifier_invalidate_page(struct mm_struct *mm,
@@ -146,13 +152,14 @@ void __mmu_notifier_invalidate_page(stru
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->invalidate_page)
mn->ops->invalidate_page(mn, mm, address);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
@@ -160,13 +167,14 @@ void __mmu_notifier_invalidate_range_sta
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->invalidate_range_start)
mn->ops->invalidate_range_start(mn, mm, start, end);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
@@ -174,13 +182,14 @@ void __mmu_notifier_invalidate_range_end
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->invalidate_range_end)
mn->ops->invalidate_range_end(mn, mm, start, end);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
static int do_mmu_notifier_register(struct mmu_notifier *mn,
@@ -192,6 +201,12 @@ static int do_mmu_notifier_register(stru
BUG_ON(atomic_read(&mm->mm_users) <= 0);
+ /*
+ * Verify that mmu_notifier_init() already run and the global srcu is
+ * initialized.
+ */
+ BUG_ON(!srcu.per_cpu_ref);
+
ret = -ENOMEM;
mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL);
if (unlikely(!mmu_notifier_mm))
@@ -274,8 +289,8 @@ void __mmu_notifier_mm_destroy(struct mm
/*
* This releases the mm_count pin automatically and frees the mm
* structure if it was the last user of it. It serializes against
- * running mmu notifiers with RCU and against mmu_notifier_unregister
- * with the unregister lock + RCU. All sptes must be dropped before
+ * running mmu notifiers with SRCU and against mmu_notifier_unregister
+ * with the unregister lock + SRCU. All sptes must be dropped before
* calling mmu_notifier_unregister. ->release or any other notifier
* method may be invoked concurrently with mmu_notifier_unregister,
* and only after mmu_notifier_unregister returned we're guaranteed
@@ -290,8 +305,9 @@ void mmu_notifier_unregister(struct mmu_
* RCU here will force exit_mmap to wait ->release to finish
* before freeing the pages.
*/
- rcu_read_lock();
+ int id;
+ id = srcu_read_lock(&srcu);
/*
* exit_mmap will block in mmu_notifier_release to
* guarantee ->release is called before freeing the
@@ -299,7 +315,7 @@ void mmu_notifier_unregister(struct mmu_
*/
if (mn->ops->release)
mn->ops->release(mn, mm);
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
spin_lock(&mm->mmu_notifier_mm->lock);
hlist_del_rcu(&mn->hlist);
@@ -310,10 +326,17 @@ void mmu_notifier_unregister(struct mmu_
* Wait any running method to finish, of course including
* ->release if it was run by mmu_notifier_relase instead of us.
*/
- synchronize_rcu();
+ synchronize_srcu(&srcu);
BUG_ON(atomic_read(&mm->mm_count) <= 0);
mmdrop(mm);
}
EXPORT_SYMBOL_GPL(mmu_notifier_unregister);
+
+static int __init mmu_notifier_init(void)
+{
+ return init_srcu_struct(&srcu);
+}
+
+module_init(mmu_notifier_init);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 098/153] mm: mmu_notifier: make the mmu_notifier srcu static
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (96 preceding siblings ...)
2013-03-04 3:38 ` [ 097/153] mm: mmu_notifier: have mmu_notifiers use a global SRCU so they may safely schedule Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 099/153] mmu_notifier_unregister NULL Pointer deref and multiple ->release() callouts Ben Hutchings
` (56 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Andrea Arcangeli, Xiao Guangrong, Sagi Grimberg,
Peter Zijlstra, Haggai Eran, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrea Arcangeli <aarcange@redhat.com>
commit 70400303ce0c4ced3139499c676d5c79636b0c72 upstream.
The variable must be static especially given the variable name.
s/RCU/SRCU/ over a few comments.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
mm/mmu_notifier.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -20,7 +20,7 @@
#include <linux/slab.h>
/* global SRCU for all MMs */
-struct srcu_struct srcu;
+static struct srcu_struct srcu;
/*
* This function can't run concurrently against mmu_notifier_register
@@ -41,7 +41,7 @@ void __mmu_notifier_release(struct mm_st
int id;
/*
- * RCU here will block mmu_notifier_unregister until
+ * SRCU here will block mmu_notifier_unregister until
* ->release returns.
*/
id = srcu_read_lock(&srcu);
@@ -302,7 +302,7 @@ void mmu_notifier_unregister(struct mmu_
if (!hlist_unhashed(&mn->hlist)) {
/*
- * RCU here will force exit_mmap to wait ->release to finish
+ * SRCU here will force exit_mmap to wait ->release to finish
* before freeing the pages.
*/
int id;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 099/153] mmu_notifier_unregister NULL Pointer deref and multiple ->release() callouts
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (97 preceding siblings ...)
2013-03-04 3:38 ` [ 098/153] mm: mmu_notifier: make the mmu_notifier srcu static Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 100/153] mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages Ben Hutchings
` (55 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Robin Holt, Andrea Arcangeli, Wanpeng Li, Xiao Guangrong,
Avi Kivity, Hugh Dickins, Marcelo Tosatti, Sagi Grimberg,
Haggai Eran, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Holt <holt@sgi.com>
commit 751efd8610d3d7d67b7bdf7f62646edea7365dd7 upstream.
There is a race condition between mmu_notifier_unregister() and
__mmu_notifier_release().
Assume two tasks, one calling mmu_notifier_unregister() as a result of a
filp_close() ->flush() callout (task A), and the other calling
mmu_notifier_release() from an mmput() (task B).
A B
t1 srcu_read_lock()
t2 if (!hlist_unhashed())
t3 srcu_read_unlock()
t4 srcu_read_lock()
t5 hlist_del_init_rcu()
t6 synchronize_srcu()
t7 srcu_read_unlock()
t8 hlist_del_rcu() <--- NULL pointer deref.
Additionally, the list traversal in __mmu_notifier_release() is not
protected by the by the mmu_notifier_mm->hlist_lock which can result in
callouts to the ->release() notifier from both mmu_notifier_unregister()
and __mmu_notifier_release().
-stable suggestions:
The stable trees prior to 3.7.y need commits 21a92735f660 and
70400303ce0c cherry-picked in that order prior to cherry-picking this
commit. The 3.7.y tree already has those two commits.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Sagi Grimberg <sagig@mellanox.co.il>
Cc: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
mm/mmu_notifier.c | 82 +++++++++++++++++++++++++++--------------------------
1 file changed, 42 insertions(+), 40 deletions(-)
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -37,49 +37,51 @@ static struct srcu_struct srcu;
void __mmu_notifier_release(struct mm_struct *mm)
{
struct mmu_notifier *mn;
- struct hlist_node *n;
int id;
/*
- * SRCU here will block mmu_notifier_unregister until
- * ->release returns.
+ * srcu_read_lock() here will block synchronize_srcu() in
+ * mmu_notifier_unregister() until all registered
+ * ->release() callouts this function makes have
+ * returned.
*/
id = srcu_read_lock(&srcu);
- hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist)
- /*
- * if ->release runs before mmu_notifier_unregister it
- * must be handled as it's the only way for the driver
- * to flush all existing sptes and stop the driver
- * from establishing any more sptes before all the
- * pages in the mm are freed.
- */
- if (mn->ops->release)
- mn->ops->release(mn, mm);
- srcu_read_unlock(&srcu, id);
-
spin_lock(&mm->mmu_notifier_mm->lock);
while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
mn = hlist_entry(mm->mmu_notifier_mm->list.first,
struct mmu_notifier,
hlist);
+
/*
- * We arrived before mmu_notifier_unregister so
- * mmu_notifier_unregister will do nothing other than
- * to wait ->release to finish and
- * mmu_notifier_unregister to return.
+ * Unlink. This will prevent mmu_notifier_unregister()
+ * from also making the ->release() callout.
*/
hlist_del_init_rcu(&mn->hlist);
+ spin_unlock(&mm->mmu_notifier_mm->lock);
+
+ /*
+ * Clear sptes. (see 'release' description in mmu_notifier.h)
+ */
+ if (mn->ops->release)
+ mn->ops->release(mn, mm);
+
+ spin_lock(&mm->mmu_notifier_mm->lock);
}
spin_unlock(&mm->mmu_notifier_mm->lock);
/*
- * synchronize_srcu here prevents mmu_notifier_release to
- * return to exit_mmap (which would proceed freeing all pages
- * in the mm) until the ->release method returns, if it was
- * invoked by mmu_notifier_unregister.
- *
- * The mmu_notifier_mm can't go away from under us because one
- * mm_count is hold by exit_mmap.
+ * All callouts to ->release() which we have done are complete.
+ * Allow synchronize_srcu() in mmu_notifier_unregister() to complete
+ */
+ srcu_read_unlock(&srcu, id);
+
+ /*
+ * mmu_notifier_unregister() may have unlinked a notifier and may
+ * still be calling out to it. Additionally, other notifiers
+ * may have been active via vmtruncate() et. al. Block here
+ * to ensure that all notifier callouts for this mm have been
+ * completed and the sptes are really cleaned up before returning
+ * to exit_mmap().
*/
synchronize_srcu(&srcu);
}
@@ -300,31 +302,31 @@ void mmu_notifier_unregister(struct mmu_
{
BUG_ON(atomic_read(&mm->mm_count) <= 0);
+ spin_lock(&mm->mmu_notifier_mm->lock);
if (!hlist_unhashed(&mn->hlist)) {
- /*
- * SRCU here will force exit_mmap to wait ->release to finish
- * before freeing the pages.
- */
int id;
- id = srcu_read_lock(&srcu);
/*
- * exit_mmap will block in mmu_notifier_release to
- * guarantee ->release is called before freeing the
- * pages.
+ * Ensure we synchronize up with __mmu_notifier_release().
*/
+ id = srcu_read_lock(&srcu);
+
+ hlist_del_rcu(&mn->hlist);
+ spin_unlock(&mm->mmu_notifier_mm->lock);
+
if (mn->ops->release)
mn->ops->release(mn, mm);
- srcu_read_unlock(&srcu, id);
- spin_lock(&mm->mmu_notifier_mm->lock);
- hlist_del_rcu(&mn->hlist);
+ /*
+ * Allow __mmu_notifier_release() to complete.
+ */
+ srcu_read_unlock(&srcu, id);
+ } else
spin_unlock(&mm->mmu_notifier_mm->lock);
- }
/*
- * Wait any running method to finish, of course including
- * ->release if it was run by mmu_notifier_relase instead of us.
+ * Wait for any running method to finish, including ->release() if it
+ * was run by __mmu_notifier_release() instead of us.
*/
synchronize_srcu(&srcu);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 100/153] mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (98 preceding siblings ...)
2013-03-04 3:38 ` [ 099/153] mmu_notifier_unregister NULL Pointer deref and multiple ->release() callouts Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 101/153] tmpfs: fix use-after-free of mempolicy object Ben Hutchings
` (54 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Mel Gorman, Rob van der Heij, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mel Gorman <mgorman@suse.de>
commit 67d46b296a1ba1477c0df8ff3bc5e0167a0b0732 upstream.
Rob van der Heij reported the following (paraphrased) on private mail.
The scenario is that I want to avoid backups to fill up the page
cache and purge stuff that is more likely to be used again (this is
with s390x Linux on z/VM, so I don't give it as much memory that
we don't care anymore). So I have something with LD_PRELOAD that
intercepts the close() call (from tar, in this case) and issues
a posix_fadvise() just before closing the file.
This mostly works, except for small files (less than 14 pages)
that remains in page cache after the face.
Unfortunately Rob has not had a chance to test this exact patch but the
test program below should be reproducing the problem he described.
The issue is the per-cpu pagevecs for LRU additions. If the pages are
added by one CPU but fadvise() is called on another then the pages
remain resident as the invalidate_mapping_pages() only drains the local
pagevecs via its call to pagevec_release(). The user-visible effect is
that a program that uses fadvise() properly is not obeyed.
A possible fix for this is to put the necessary smarts into
invalidate_mapping_pages() to globally drain the LRU pagevecs if a
pagevec page could not be discarded. The downside with this is that an
inode cache shrink would send a global IPI and memory pressure
potentially causing global IPI storms is very undesirable.
Instead, this patch adds a check during fadvise(POSIX_FADV_DONTNEED) to
check if invalidate_mapping_pages() discarded all the requested pages.
If a subset of pages are discarded it drains the LRU pagevecs and tries
again. If the second attempt fails, it assumes it is due to the pages
being mapped, locked or dirty and does not care. With this patch, an
application using fadvise() correctly will be obeyed but there is a
downside that a malicious application can force the kernel to send
global IPIs and increase overhead.
If accepted, I would like this to be considered as a -stable candidate.
It's not an urgent issue but it's a system call that is not working as
advertised which is weak.
The following test program demonstrates the problem. It should never
report that pages are still resident but will without this patch. It
assumes that CPU 0 and 1 exist.
int main() {
int fd;
int pagesize = getpagesize();
ssize_t written = 0, expected;
char *buf;
unsigned char *vec;
int resident, i;
cpu_set_t set;
/* Prepare a buffer for writing */
expected = FILESIZE_PAGES * pagesize;
buf = malloc(expected + 1);
if (buf == NULL) {
printf("ENOMEM\n");
exit(EXIT_FAILURE);
}
buf[expected] = 0;
memset(buf, 'a', expected);
/* Prepare the mincore vec */
vec = malloc(FILESIZE_PAGES);
if (vec == NULL) {
printf("ENOMEM\n");
exit(EXIT_FAILURE);
}
/* Bind ourselves to CPU 0 */
CPU_ZERO(&set);
CPU_SET(0, &set);
if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) {
perror("sched_setaffinity");
exit(EXIT_FAILURE);
}
/* open file, unlink and write buffer */
fd = open("fadvise-test-file", O_CREAT|O_EXCL|O_RDWR);
if (fd == -1) {
perror("open");
exit(EXIT_FAILURE);
}
unlink("fadvise-test-file");
while (written < expected) {
ssize_t this_write;
this_write = write(fd, buf + written, expected - written);
if (this_write == -1) {
perror("write");
exit(EXIT_FAILURE);
}
written += this_write;
}
free(buf);
/*
* Force ourselves to another CPU. If fadvise only flushes the local
* CPUs pagevecs then the fadvise will fail to discard all file pages
*/
CPU_ZERO(&set);
CPU_SET(1, &set);
if (sched_setaffinity(getpid(), sizeof(set), &set) == -1) {
perror("sched_setaffinity");
exit(EXIT_FAILURE);
}
/* sync and fadvise to discard the page cache */
fsync(fd);
if (posix_fadvise(fd, 0, expected, POSIX_FADV_DONTNEED) == -1) {
perror("posix_fadvise");
exit(EXIT_FAILURE);
}
/* map the file and use mincore to see which parts of it are resident */
buf = mmap(NULL, expected, PROT_READ, MAP_SHARED, fd, 0);
if (buf == NULL) {
perror("mmap");
exit(EXIT_FAILURE);
}
if (mincore(buf, expected, vec) == -1) {
perror("mincore");
exit(EXIT_FAILURE);
}
/* Check residency */
for (i = 0, resident = 0; i < FILESIZE_PAGES; i++) {
if (vec[i])
resident++;
}
if (resident != 0) {
printf("Nr unexpected pages resident: %d\n", resident);
exit(EXIT_FAILURE);
}
munmap(buf, expected);
close(fd);
free(vec);
exit(EXIT_SUCCESS);
}
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Rob van der Heij <rvdheij@gmail.com>
Tested-by: Rob van der Heij <rvdheij@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
mm/fadvise.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -17,6 +17,7 @@
#include <linux/fadvise.h>
#include <linux/writeback.h>
#include <linux/syscalls.h>
+#include <linux/swap.h>
#include <asm/unistd.h>
@@ -123,9 +124,22 @@ SYSCALL_DEFINE(fadvise64_64)(int fd, lof
start_index = (offset+(PAGE_CACHE_SIZE-1)) >> PAGE_CACHE_SHIFT;
end_index = (endbyte >> PAGE_CACHE_SHIFT);
- if (end_index >= start_index)
- invalidate_mapping_pages(mapping, start_index,
+ if (end_index >= start_index) {
+ unsigned long count = invalidate_mapping_pages(mapping,
+ start_index, end_index);
+
+ /*
+ * If fewer pages were invalidated than expected then
+ * it is possible that some of the pages were on
+ * a per-cpu pagevec for a remote CPU. Drain all
+ * pagevecs and try again.
+ */
+ if (count < (end_index - start_index + 1)) {
+ lru_add_drain_all();
+ invalidate_mapping_pages(mapping, start_index,
end_index);
+ }
+ }
break;
default:
ret = -EINVAL;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 101/153] tmpfs: fix use-after-free of mempolicy object
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (99 preceding siblings ...)
2013-03-04 3:38 ` [ 100/153] mm/fadvise.c: drain all pagevecs if POSIX_FADV_DONTNEED fails to discard all pages Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 102/153] mmc: sdhci-esdhc-imx: fix host version read Ben Hutchings
` (53 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Greg Thelen, Hugh Dickins, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Thelen <gthelen@google.com>
commit 5f00110f7273f9ff04ac69a5f85bb535a4fd0987 upstream.
The tmpfs remount logic preserves filesystem mempolicy if the mpol=M
option is not specified in the remount request. A new policy can be
specified if mpol=M is given.
Before this patch remounting an mpol bound tmpfs without specifying
mpol= mount option in the remount request would set the filesystem's
mempolicy object to a freed mempolicy object.
To reproduce the problem boot a DEBUG_PAGEALLOC kernel and run:
# mkdir /tmp/x
# mount -t tmpfs -o size=100M,mpol=interleave nodev /tmp/x
# grep /tmp/x /proc/mounts
nodev /tmp/x tmpfs rw,relatime,size=102400k,mpol=interleave:0-3 0 0
# mount -o remount,size=200M nodev /tmp/x
# grep /tmp/x /proc/mounts
nodev /tmp/x tmpfs rw,relatime,size=204800k,mpol=??? 0 0
# note ? garbage in mpol=... output above
# dd if=/dev/zero of=/tmp/x/f count=1
# panic here
Panic:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [< (null)>] (null)
[...]
Oops: 0010 [#1] SMP DEBUG_PAGEALLOC
Call Trace:
mpol_shared_policy_init+0xa5/0x160
shmem_get_inode+0x209/0x270
shmem_mknod+0x3e/0xf0
shmem_create+0x18/0x20
vfs_create+0xb5/0x130
do_last+0x9a1/0xea0
path_openat+0xb3/0x4d0
do_filp_open+0x42/0xa0
do_sys_open+0xfe/0x1e0
compat_sys_open+0x1b/0x20
cstar_dispatch+0x7/0x1f
Non-debug kernels will not crash immediately because referencing the
dangling mpol will not cause a fault. Instead the filesystem will
reference a freed mempolicy object, which will cause unpredictable
behavior.
The problem boils down to a dropped mpol reference below if
shmem_parse_options() does not allocate a new mpol:
config = *sbinfo
shmem_parse_options(data, &config, true)
mpol_put(sbinfo->mpol)
sbinfo->mpol = config.mpol /* BUG: saves unreferenced mpol */
This patch avoids the crash by not releasing the mempolicy if
shmem_parse_options() doesn't create a new mpol.
How far back does this issue go? I see it in both 2.6.36 and 3.3. I did
not look back further.
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
mm/shmem.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2121,6 +2121,7 @@ static int shmem_remount_fs(struct super
unsigned long inodes;
int error = -EINVAL;
+ config.mpol = NULL;
if (shmem_parse_options(data, &config, true))
return error;
@@ -2145,8 +2146,13 @@ static int shmem_remount_fs(struct super
sbinfo->max_inodes = config.max_inodes;
sbinfo->free_inodes = config.max_inodes - inodes;
- mpol_put(sbinfo->mpol);
- sbinfo->mpol = config.mpol; /* transfers initial ref */
+ /*
+ * Preserve previous mempolicy unless mpol remount option was specified.
+ */
+ if (config.mpol) {
+ mpol_put(sbinfo->mpol);
+ sbinfo->mpol = config.mpol; /* transfers initial ref */
+ }
out:
spin_unlock(&sbinfo->stat_lock);
return error;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 102/153] mmc: sdhci-esdhc-imx: fix host version read
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (100 preceding siblings ...)
2013-03-04 3:38 ` [ 101/153] tmpfs: fix use-after-free of mempolicy object Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 103/153] doc, xen: Mention earlyprintk=xen in the documentation Ben Hutchings
` (52 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Shawn Guo, Chris Ball
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Guo <shawn.guo@linaro.org>
commit ef4d0888bb7e1b963880f086575081c3d39cad2d upstream.
When commit 95a2482 (mmc: sdhci-esdhc-imx: add basic imx6q usdhc
support) works around host version issue on imx6q, it gets the
register address fixup "reg ^= 2" lost for imx25/35/51/53 esdhc.
Thus, the controller version on these SoCs is wrongly identified
as v1 while it's actually v2.
Add the address fixup back and take a different approach to correct
imx6q host version, so that the host version read gets back to work
for all SoCs.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 19 +++++++++++--------
1 file changed, 11 insertions(+), 8 deletions(-)
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -232,15 +232,18 @@ static void esdhc_writel_le(struct sdhci
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
if (unlikely(reg == SDHCI_HOST_VERSION)) {
- u16 val = readw(host->ioaddr + (reg ^ 2));
- /*
- * uSDHC supports SDHCI v3.0, but it's encoded as value
- * 0x3 in host controller version register, which violates
- * SDHCI_SPEC_300 definition. Work it around here.
- */
- if ((val & SDHCI_SPEC_VER_MASK) == 3)
- return --val;
+ reg ^= 2;
+ if (is_imx6q_usdhc(imx_data)) {
+ /*
+ * The usdhc register returns a wrong host version.
+ * Correct it here.
+ */
+ return SDHCI_SPEC_300;
+ }
}
return readw(host->ioaddr + reg);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 103/153] doc, xen: Mention earlyprintk=xen in the documentation.
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (101 preceding siblings ...)
2013-03-04 3:38 ` [ 102/153] mmc: sdhci-esdhc-imx: fix host version read Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 104/153] doc, kernel-parameters: Document console=hvc<n> Ben Hutchings
` (51 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Konrad Rzeszutek Wilk, H. Peter Anvin, H. Peter Anvin
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit 2482a92e7d17187301d7313cfe5021b13393a0b4 upstream.
The earlyprintk for Xen PV guests utilizes a simple hypercall
(console_io) to provide output to Xen emergency console.
Note that the Xen hypervisor should be booted with 'loglevel=all'
to output said information.
Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-2-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
Documentation/kernel-parameters.txt | 3 +++
1 file changed, 3 insertions(+)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -703,6 +703,7 @@ bytes respectively. Such letter suffixes
earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
+ earlyprintk=xen
earlyprintk=serial[,ttySn[,baudrate]]
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
@@ -720,6 +721,8 @@ bytes respectively. Such letter suffixes
The VGA output is eventually overwritten by the real
console.
+ The xen output can only be used by Xen PV guests.
+
ekgdboc= [X86,KGDB] Allow early kernel console debugging
ekgdboc=kbd
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 104/153] doc, kernel-parameters: Document console=hvc<n>
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (102 preceding siblings ...)
2013-03-04 3:38 ` [ 103/153] doc, xen: Mention earlyprintk=xen in the documentation Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 105/153] ocfs2: fix possible use-after-free with AIO Ben Hutchings
` (50 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Konrad Rzeszutek Wilk, Greg KH, H. Peter Anvin
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
commit a2fd6419174470f5ae6383f5037d0ee21ed9833f upstream.
Both the PowerPC hypervisor and Xen hypervisor can utilize the
hvc driver.
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-3-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
Documentation/kernel-parameters.txt | 2 ++
1 file changed, 2 insertions(+)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -552,6 +552,8 @@ bytes respectively. Such letter suffixes
UART at the specified I/O port or MMIO address,
switching to the matching ttyS device later. The
options are the same as for ttyS, above.
+ hvc<n> Use the hypervisor console device <n>. This is for
+ both Xen and PowerPC hypervisors.
If the device connected to the port is not a TTY but a braille
device, prepend "brl," before the device type, for instance
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 105/153] ocfs2: fix possible use-after-free with AIO
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (103 preceding siblings ...)
2013-03-04 3:38 ` [ 104/153] doc, kernel-parameters: Document console=hvc<n> Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 106/153] x86: Make sure we can boot in the case the BDA contains pure garbage Ben Hutchings
` (49 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jan Kara, Jeff Moyer, Joel Becker, Mark Fasheh, Al Viro
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <jack@suse.cz>
commit 9b171e0c74ca0549d0610990a862dd895870f04a upstream.
Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ocfs2/aops.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -593,9 +593,9 @@ static void ocfs2_dio_end_io(struct kioc
level = ocfs2_iocb_rw_locked_level(iocb);
ocfs2_rw_unlock(inode, level);
+ inode_dio_done(inode);
if (is_async)
aio_complete(iocb, ret, 0);
- inode_dio_done(inode);
}
/*
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 106/153] x86: Make sure we can boot in the case the BDA contains pure garbage
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (104 preceding siblings ...)
2013-03-04 3:38 ` [ 105/153] ocfs2: fix possible use-after-free with AIO Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 107/153] ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly Ben Hutchings
` (48 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, H. Peter Anvin, Darren Hart, Matt Fleming
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "H. Peter Anvin" <hpa@linux.intel.com>
commit 7c10093692ed2e6f318387d96b829320aa0ca64c upstream.
On non-BIOS platforms it is possible that the BIOS data area contains
garbage instead of being zeroed or something equivalent (firmware
people: we are talking of 1.5K here, so please do the sane thing.)
We need on the order of 20-30K of low memory in order to boot, which
may grow up to < 64K in the future. We probably want to avoid the
lowest of the low memory. At the same time, it seems extremely
unlikely that a legitimate EBDA would ever reach down to the 128K
(which would require it to be over half a megabyte in size.) Thus,
pick 128K as the cutoff for "this is insane, ignore." We may still
end up reserving a bunch of extra memory on the low megabyte, but that
is not really a major issue these days. In the worst case we lose
512K of RAM.
This code really should be merged with trim_bios_range() in
arch/x86/kernel/setup.c, but that is a bigger patch for a later merge
window.
Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/n/tip-oebml055yyfm8yxmria09rja@git.kernel.org
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/x86/kernel/head.c | 53 +++++++++++++++++++++++++++++++-----------------
1 file changed, 34 insertions(+), 19 deletions(-)
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -5,8 +5,6 @@
#include <asm/setup.h>
#include <asm/bios_ebda.h>
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
/*
* The BIOS places the EBDA/XBDA at the top of conventional
* memory, and usually decreases the reported amount of
@@ -16,17 +14,30 @@
* chipset: reserve a page before VGA to prevent PCI prefetch
* into it (errata #56). Usually the page is reserved anyways,
* unless you have no PS/2 mouse plugged in.
+ *
+ * This functions is deliberately very conservative. Losing
+ * memory in the bottom megabyte is rarely a problem, as long
+ * as we have enough memory to install the trampoline. Using
+ * memory that is in use by the BIOS or by some DMA device
+ * the BIOS didn't shut down *is* a big problem.
*/
+
+#define BIOS_LOWMEM_KILOBYTES 0x413
+#define LOWMEM_CAP 0x9f000U /* Absolute maximum */
+#define INSANE_CUTOFF 0x20000U /* Less than this = insane */
+
void __init reserve_ebda_region(void)
{
unsigned int lowmem, ebda_addr;
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
+ /*
+ * To determine the position of the EBDA and the
+ * end of conventional memory, we need to look at
+ * the BIOS data area. In a paravirtual environment
+ * that area is absent. We'll just have to assume
+ * that the paravirt case can handle memory setup
+ * correctly, without our help.
+ */
if (paravirt_enabled())
return;
@@ -37,19 +48,23 @@ void __init reserve_ebda_region(void)
/* start of EBDA area */
ebda_addr = get_bios_ebda();
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
-
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
-
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
+ /*
+ * Note: some old Dells seem to need 4k EBDA without
+ * reporting so, so just consider the memory above 0x9f000
+ * to be off limits (bugzilla 2990).
+ */
+
+ /* If the EBDA address is below 128K, assume it is bogus */
+ if (ebda_addr < INSANE_CUTOFF)
+ ebda_addr = LOWMEM_CAP;
+
+ /* If lowmem is less than 128K, assume it is bogus */
+ if (lowmem < INSANE_CUTOFF)
+ lowmem = LOWMEM_CAP;
+
+ /* Use the lower of the lowmem and EBDA markers as the cutoff */
+ lowmem = min(lowmem, ebda_addr);
+ lowmem = min(lowmem, LOWMEM_CAP); /* Absolute cap */
/* reserve all memory between lowmem and the 1MB mark */
memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved");
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 107/153] ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (105 preceding siblings ...)
2013-03-04 3:38 ` [ 106/153] x86: Make sure we can boot in the case the BDA contains pure garbage Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 108/153] ocfs2: ac->ac_allow_chain_relink=0 wont disable group relink Ben Hutchings
` (47 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jeff Liu, Tao Ma, Mimi Zohar, Joel Becker, Mark Fasheh,
Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Liu <jeff.liu@oracle.com>
commit 32918dd9f19e5960af4cdfa41190bb843fb2247b upstream.
We need to re-initialize the security for a new reflinked inode with its
parent dirs if it isn't specified to be preserved for ocfs2_reflink().
However, the code logic is broken at ocfs2_init_security_and_acl()
although ocfs2_init_security_get() succeed. As a result,
ocfs2_acl_init() does not involked and therefore the default ACL of
parent dir was missing on the new inode.
Note this was introduced by 9d8f13ba3 ("security: new
security_inode_init_security API adds function callback")
To reproduce:
set default ACL for the parent dir(ocfs2 in this case):
$ setfacl -m default:user:jeff:rwx ../ocfs2/
$ getfacl ../ocfs2/
# file: ../ocfs2/
# owner: jeff
# group: jeff
user::rwx
group::r-x
other::r-x
default:user::rwx
default:user:jeff:rwx
default:group::r-x
default:mask::rwx
default:other::r-x
$ touch a
$ getfacl a
# file: a
# owner: jeff
# group: jeff
user::rw-
group::rw-
other::r--
Before patching, create reflink file b from a, the user
default ACL entry(user:jeff:rwx)was missing:
$ ./ocfs2_reflink a b
$ getfacl b
# file: b
# owner: jeff
# group: jeff
user::rw-
group::rw-
other::r--
In this case, the end user can also observed an error message at syslog:
(ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0
After applying this patch, create reflink file c from a:
$ ./ocfs2_reflink a c
$ getfacl c
# file: c
# owner: jeff
# group: jeff
user::rw-
user:jeff:rwx #effective:rw-
group::r-x #effective:r--
mask::rw-
other::r--
Test program:
/* Usage: reflink <source> <dest> */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>
static int
reflink_file(char const *src_name, char const *dst_name,
bool preserve_attrs)
{
int fd;
#ifndef REFLINK_ATTR_NONE
# define REFLINK_ATTR_NONE 0
#endif
#ifndef REFLINK_ATTR_PRESERVE
# define REFLINK_ATTR_PRESERVE 1
#endif
#ifndef OCFS2_IOC_REFLINK
struct reflink_arguments {
uint64_t old_path;
uint64_t new_path;
uint64_t preserve;
};
# define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments)
#endif
struct reflink_arguments args = {
.old_path = (unsigned long) src_name,
.new_path = (unsigned long) dst_name,
.preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE :
REFLINK_ATTR_NONE,
};
fd = open(src_name, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "Failed to open %s: %s\n",
src_name, strerror(errno));
return -1;
}
if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) {
fprintf(stderr, "Failed to reflink %s to %s: %s\n",
src_name, dst_name, strerror(errno));
return -1;
}
}
int
main(int argc, char *argv[])
{
if (argc != 3) {
fprintf(stdout, "Usage: %s source dest\n", argv[0]);
return 1;
}
return reflink_file(argv[1], argv[2], 0);
}
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ocfs2/xattr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -7189,7 +7189,7 @@ int ocfs2_init_security_and_acl(struct i
struct buffer_head *dir_bh = NULL;
ret = ocfs2_init_security_get(inode, dir, qstr, NULL);
- if (!ret) {
+ if (ret) {
mlog_errno(ret);
goto leave;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 108/153] ocfs2: ac->ac_allow_chain_relink=0 wont disable group relink
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (106 preceding siblings ...)
2013-03-04 3:38 ` [ 107/153] ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 109/153] block: fix ext_devt_idr handling Ben Hutchings
` (46 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Xiaowei.Hu, Srinivas Eeda, Mark Fasheh, Joel Becker,
Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Xiaowei.Hu" <xiaowei.hu@oracle.com>
commit 309a85b6861fedbb48a22d45e0e079d1be993b3a upstream.
ocfs2_block_group_alloc_discontig() disables chain relink by setting
ac->ac_allow_chain_relink = 0 because it grabs clusters from multiple
cluster groups.
It doesn't keep the credits for all chain relink,but
ocfs2_claim_suballoc_bits overrides this in this call trace:
ocfs2_block_group_claim_bits()->ocfs2_claim_clusters()->
__ocfs2_claim_clusters()->ocfs2_claim_suballoc_bits()
ocfs2_claim_suballoc_bits set ac->ac_allow_chain_relink = 1; then call
ocfs2_search_chain() one time and disable it again, and then we run out
of credits.
Fix is to allow relink by default and disable it in
ocfs2_block_group_alloc_discontig.
Without this patch, End-users will run into a crash due to run out of
credits, backtrace like this:
RIP: 0010:[<ffffffffa0808b14>] [<ffffffffa0808b14>]
jbd2_journal_dirty_metadata+0x164/0x170 [jbd2]
RSP: 0018:ffff8801b919b5b8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88022139ddc0 RCX: ffff880159f652d0
RDX: ffff880178aa3000 RSI: ffff880159f652d0 RDI: ffff880087f09bf8
RBP: ffff8801b919b5e8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000001e00 R11: 00000000000150b0 R12: ffff880159f652d0
R13: ffff8801a0cae908 R14: ffff880087f09bf8 R15: ffff88018d177800
FS: 00007fc9b0b6b6e0(0000) GS:ffff88022fd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000040819c CR3: 0000000184017000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process dd (pid: 9945, threadinfo ffff8801b919a000, task ffff880149a264c0)
Call Trace:
ocfs2_journal_dirty+0x2f/0x70 [ocfs2]
ocfs2_relink_block_group+0x111/0x480 [ocfs2]
ocfs2_search_chain+0x455/0x9a0 [ocfs2]
...
Signed-off-by: Xiaowei.Hu <xiaowei.hu@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ocfs2/suballoc.c | 7 +++----
fs/ocfs2/suballoc.h | 2 +-
2 files changed, 4 insertions(+), 5 deletions(-)
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -642,7 +642,7 @@ ocfs2_block_group_alloc_discontig(handle
* cluster groups will be staying in cache for the duration of
* this operation.
*/
- ac->ac_allow_chain_relink = 0;
+ ac->ac_disable_chain_relink = 1;
/* Claim the first region */
status = ocfs2_block_group_claim_bits(osb, handle, ac, min_bits,
@@ -1823,7 +1823,7 @@ static int ocfs2_search_chain(struct ocf
* Do this *after* figuring out how many bits we're taking out
* of our target group.
*/
- if (ac->ac_allow_chain_relink &&
+ if (!ac->ac_disable_chain_relink &&
(prev_group_bh) &&
(ocfs2_block_group_reasonably_empty(bg, res->sr_bits))) {
status = ocfs2_relink_block_group(handle, alloc_inode,
@@ -1928,7 +1928,6 @@ static int ocfs2_claim_suballoc_bits(str
victim = ocfs2_find_victim_chain(cl);
ac->ac_chain = victim;
- ac->ac_allow_chain_relink = 1;
status = ocfs2_search_chain(ac, handle, bits_wanted, min_bits,
res, &bits_left);
@@ -1947,7 +1946,7 @@ static int ocfs2_claim_suballoc_bits(str
* searching each chain in order. Don't allow chain relinking
* because we only calculate enough journal credits for one
* relink per alloc. */
- ac->ac_allow_chain_relink = 0;
+ ac->ac_disable_chain_relink = 1;
for (i = 0; i < le16_to_cpu(cl->cl_next_free_rec); i ++) {
if (i == victim)
continue;
--- a/fs/ocfs2/suballoc.h
+++ b/fs/ocfs2/suballoc.h
@@ -49,7 +49,7 @@ struct ocfs2_alloc_context {
/* these are used by the chain search */
u16 ac_chain;
- int ac_allow_chain_relink;
+ int ac_disable_chain_relink;
group_search_t *ac_group_search;
u64 ac_last_group;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 109/153] block: fix ext_devt_idr handling
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (107 preceding siblings ...)
2013-03-04 3:38 ` [ 108/153] ocfs2: ac->ac_allow_chain_relink=0 wont disable group relink Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 110/153] idr: fix a subtle bug in idr_get_next() Ben Hutchings
` (45 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Tomas Henzl, Jens Axboe, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomas Henzl <thenzl@redhat.com>
commit 7b74e912785a11572da43292786ed07ada7e3e0c upstream.
While adding and removing a lot of disks disks and partitions this
sometimes shows up:
WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted)
Hardware name:
sysfs: cannot create duplicate filename '/dev/block/259:751'
Modules linked in: raid1 autofs4 bnx2fc cnic uio fcoe libfcoe libfc 8021q scsi_transport_fc scsi_tgt garp stp llc sunrpc cpufreq_ondemand powernow_k8 freq_table mperf ipv6 dm_mirror dm_region_hash dm_log power_meter microcode dcdbas serio_raw amd64_edac_mod edac_core edac_mce_amd i2c_piix4 i2c_core k10temp bnx2 sg ixgbe dca mdio ext4 mbcache jbd2 dm_round_robin sr_mod cdrom sd_mod crc_t10dif ata_generic pata_acpi pata_atiixp ahci mptsas mptscsih mptbase scsi_transport_sas dm_multipath dm_mod [last unloaded: scsi_wait_scan]
Pid: 44103, comm: async/16 Not tainted 2.6.32-195.el6.x86_64 #1
Call Trace:
warn_slowpath_common+0x87/0xc0
warn_slowpath_fmt+0x46/0x50
sysfs_add_one+0xc9/0x130
sysfs_do_create_link+0x12b/0x170
sysfs_create_link+0x13/0x20
device_add+0x317/0x650
idr_get_new+0x13/0x50
add_partition+0x21c/0x390
rescan_partitions+0x32b/0x470
sd_open+0x81/0x1f0 [sd_mod]
__blkdev_get+0x1b6/0x3c0
blkdev_get+0x10/0x20
register_disk+0x155/0x170
add_disk+0xa6/0x160
sd_probe_async+0x13b/0x210 [sd_mod]
add_wait_queue+0x46/0x60
async_thread+0x102/0x250
default_wake_function+0x0/0x20
async_thread+0x0/0x250
kthread+0x96/0xa0
child_rip+0xa/0x20
kthread+0x0/0xa0
child_rip+0x0/0x20
This most likely happens because dev_t is freed while the number is
still used and idr_get_new() is not protected on every use. The fix
adds a mutex where it wasn't before and moves the dev_t free function so
it is called after device del.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
block/genhd.c | 6 +++++-
block/partition-generic.c | 2 +-
2 files changed, 6 insertions(+), 2 deletions(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -421,14 +421,18 @@ int blk_alloc_devt(struct hd_struct *par
do {
if (!idr_pre_get(&ext_devt_idr, GFP_KERNEL))
return -ENOMEM;
+ mutex_lock(&ext_devt_mutex);
rc = idr_get_new(&ext_devt_idr, part, &idx);
+ mutex_unlock(&ext_devt_mutex);
} while (rc == -EAGAIN);
if (rc)
return rc;
if (idx > MAX_EXT_DEVT) {
+ mutex_lock(&ext_devt_mutex);
idr_remove(&ext_devt_idr, idx);
+ mutex_unlock(&ext_devt_mutex);
return -EBUSY;
}
@@ -645,7 +649,6 @@ void del_gendisk(struct gendisk *disk)
disk_part_iter_exit(&piter);
invalidate_partition(disk, 0);
- blk_free_devt(disk_to_dev(disk)->devt);
set_capacity(disk, 0);
disk->flags &= ~GENHD_FL_UP;
@@ -663,6 +666,7 @@ void del_gendisk(struct gendisk *disk)
if (!sysfs_deprecated)
sysfs_remove_link(block_depr, dev_name(disk_to_dev(disk)));
device_del(disk_to_dev(disk));
+ blk_free_devt(disk_to_dev(disk)->devt);
}
EXPORT_SYMBOL(del_gendisk);
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -399,11 +399,11 @@ void delete_partition(struct gendisk *di
if (!part)
return;
- blk_free_devt(part_devt(part));
rcu_assign_pointer(ptbl->part[partno], NULL);
rcu_assign_pointer(ptbl->last_lookup, NULL);
kobject_put(part->holder_dir);
device_del(part_to_dev(part));
+ blk_free_devt(part_devt(part));
hd_struct_put(part);
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 110/153] idr: fix a subtle bug in idr_get_next()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (108 preceding siblings ...)
2013-03-04 3:38 ` [ 109/153] block: fix ext_devt_idr handling Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 111/153] block: fix synchronization and limit check in blk_alloc_devt() Ben Hutchings
` (44 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Tejun Heo, David Teigland, KAMEZAWA Hiroyuki,
Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit 6cdae7416a1c45c2ce105a78187d9b7e8feb9e24 upstream.
The iteration logic of idr_get_next() is borrowed mostly verbatim from
idr_for_each(). It walks down the tree looking for the slot matching
the current ID. If the matching slot is not found, the ID is
incremented by the distance of single slot at the given level and
repeats.
The implementation assumes that during the whole iteration id is aligned
to the layer boundaries of the level closest to the leaf, which is true
for all iterations starting from zero or an existing element and thus is
fine for idr_for_each().
However, idr_get_next() may be given any point and if the starting id
hits in the middle of a non-existent layer, increment to the next layer
will end up skipping the same offset into it. For example, an IDR with
IDs filled between [64, 127] would look like the following.
[ 0 64 ... ]
/----/ |
| |
NULL [ 64 ... 127 ]
If idr_get_next() is called with 63 as the starting point, it will try
to follow down the pointer from 0. As it is NULL, it will then try to
proceed to the next slot in the same level by adding the slot distance
at that level which is 64 - making the next try 127. It goes around the
loop and finds and returns 127 skipping [64, 126].
Note that this bug also triggers in idr_for_each_entry() loop which
deletes during iteration as deletions can make layers go away leaving
the iteration with unaligned ID into missing layers.
Fix it by ensuring proceeding to the next slot doesn't carry over the
unaligned offset - ie. use round_up(id + 1, slot_distance) instead of
id += slot_distance.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Teigland <teigland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
lib/idr.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -623,7 +623,14 @@ void *idr_get_next(struct idr *idp, int
return p;
}
- id += 1 << n;
+ /*
+ * Proceed to the next layer at the current level. Unlike
+ * idr_for_each(), @id isn't guaranteed to be aligned to
+ * layer boundary at this point and adding 1 << n may
+ * incorrectly skip IDs. Make sure we jump to the
+ * beginning of the next layer using round_up().
+ */
+ id = round_up(id + 1, 1 << n);
while (n < fls(id)) {
n += IDR_BITS;
p = *--paa;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 111/153] block: fix synchronization and limit check in blk_alloc_devt()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (109 preceding siblings ...)
2013-03-04 3:38 ` [ 110/153] idr: fix a subtle bug in idr_get_next() Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:38 ` [ 112/153] firewire: add minor number range check to fw_device_init() Ben Hutchings
` (43 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Tejun Heo, Jens Axboe, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit ce23bba842aee98092225d9576dba47c82352521 upstream.
idr allocation in blk_alloc_devt() wasn't synchronized against lookup
and removal, and its limit check was off by one - 1 << MINORBITS is
the number of minors allowed, not the maximum allowed minor.
Add locking and rename MAX_EXT_DEVT to NR_EXT_DEVT and fix limit
checking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
block/genhd.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -26,7 +26,7 @@ static DEFINE_MUTEX(block_class_lock);
struct kobject *block_depr;
/* for extended dynamic devt allocation, currently only one major is used */
-#define MAX_EXT_DEVT (1 << MINORBITS)
+#define NR_EXT_DEVT (1 << MINORBITS)
/* For extended devt allocation. ext_devt_mutex prevents look up
* results from going away underneath its user.
@@ -423,19 +423,16 @@ int blk_alloc_devt(struct hd_struct *par
return -ENOMEM;
mutex_lock(&ext_devt_mutex);
rc = idr_get_new(&ext_devt_idr, part, &idx);
+ if (!rc && idx >= NR_EXT_DEVT) {
+ idr_remove(&ext_devt_idr, idx);
+ rc = -EBUSY;
+ }
mutex_unlock(&ext_devt_mutex);
} while (rc == -EAGAIN);
if (rc)
return rc;
- if (idx > MAX_EXT_DEVT) {
- mutex_lock(&ext_devt_mutex);
- idr_remove(&ext_devt_idr, idx);
- mutex_unlock(&ext_devt_mutex);
- return -EBUSY;
- }
-
*devt = MKDEV(BLOCK_EXT_MAJOR, blk_mangle_minor(idx));
return 0;
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 112/153] firewire: add minor number range check to fw_device_init()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (110 preceding siblings ...)
2013-03-04 3:38 ` [ 111/153] block: fix synchronization and limit check in blk_alloc_devt() Ben Hutchings
@ 2013-03-04 3:38 ` Ben Hutchings
2013-03-04 3:39 ` [ 113/153] idr: make idr_get_next() good for rcu_read_lock() Ben Hutchings
` (42 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:38 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Tejun Heo, Stefan Richter, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit 3bec60d511179853138836ae6e1b61fe34d9235f upstream.
fw_device_init() didn't check whether the allocated minor number isn't
too large. Fail if it goes overflows MINORBITS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/firewire/core-device.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -995,6 +995,10 @@ static void fw_device_init(struct work_s
ret = idr_pre_get(&fw_device_idr, GFP_KERNEL) ?
idr_get_new(&fw_device_idr, device, &minor) :
-ENOMEM;
+ if (minor >= 1 << MINORBITS) {
+ idr_remove(&fw_device_idr, minor);
+ minor = -ENOSPC;
+ }
up_write(&fw_device_rwsem);
if (ret < 0)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 113/153] idr: make idr_get_next() good for rcu_read_lock()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (111 preceding siblings ...)
2013-03-04 3:38 ` [ 112/153] firewire: add minor number range check to fw_device_init() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 114/153] idr: fix top layer handling Ben Hutchings
` (41 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Hugh Dickins, KAMEZAWA Hiroyuki, Li Zefan, Eric Dumazet,
Tejun Heo, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hugh Dickins <hughd@google.com>
commit 9f7de8275b46d9d11b1505adbfe6c2bb48df4741 upstream.
Make one small adjustment to idr_get_next(): take the height from the top
layer (stable under RCU) instead of from the root (unprotected by RCU), as
idr_find() does: so that it can be used with RCU locking. Copied comment
on RCU locking from idr_find().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
lib/idr.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -595,8 +595,10 @@ EXPORT_SYMBOL(idr_for_each);
* Returns pointer to registered object with id, which is next number to
* given id. After being looked up, *@nextidp will be updated for the next
* iteration.
+ *
+ * This function can be called under rcu_read_lock(), given that the leaf
+ * pointers lifetimes are correctly managed.
*/
-
void *idr_get_next(struct idr *idp, int *nextidp)
{
struct idr_layer *p, *pa[MAX_LEVEL];
@@ -605,11 +607,11 @@ void *idr_get_next(struct idr *idp, int
int n, max;
/* find first ent */
- n = idp->layers * IDR_BITS;
- max = 1 << n;
p = rcu_dereference_raw(idp->top);
if (!p)
return NULL;
+ n = (p->layer + 1) * IDR_BITS;
+ max = 1 << n;
while (id < max) {
while (n > 0 && p) {
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 114/153] idr: fix top layer handling
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (112 preceding siblings ...)
2013-03-04 3:39 ` [ 113/153] idr: make idr_get_next() good for rcu_read_lock() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 17:37 ` Luis Henriques
2013-03-04 3:39 ` [ 115/153] sysctl: fix null checking in bin_dn_node_address() Ben Hutchings
` (40 subsequent siblings)
154 siblings, 1 reply; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Tejun Heo, Rusty Russell, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit 326cf0f0f308933c10236280a322031f0097205d upstream.
Most functions in idr fail to deal with the high bits when the idr
tree grows to the maximum height.
* idr_get_empty_slot() stops growing idr tree once the depth reaches
MAX_IDR_LEVEL - 1, which is one depth shallower than necessary to
cover the whole range. The function doesn't even notice that it
didn't grow the tree enough and ends up allocating the wrong ID
given sufficiently high @starting_id.
For example, on 64 bit, if the starting id is 0x7fffff01,
idr_get_empty_slot() will grow the tree 5 layer deep, which only
covers the 30 bits and then proceed to allocate as if the bit 30
wasn't specified. It ends up allocating 0x3fffff01 without the bit
30 but still returns 0x7fffff01.
* __idr_remove_all() will not remove anything if the tree is fully
grown.
* idr_find() can't find anything if the tree is fully grown.
* idr_for_each() and idr_get_next() can't iterate anything if the tree
is fully grown.
Fix it by introducing idr_max() which returns the maximum possible ID
given the depth of tree and replacing the id limit checks in all
affected places.
As the idr_layer pointer array pa[] needs to be 1 larger than the
maximum depth, enlarge pa[] arrays by one.
While this plugs the discovered issues, the whole code base is
horrible and in desparate need of rewrite. It's fragile like hell,
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
- Adjust context
- s/MAX_IDR_LEVEL/MAX_LEVEL/; s/MAX_IDR_SHIFT/MAX_ID_SHIFT/
- Drop change to idr_alloc()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
lib/idr.c | 38 +++++++++++++++++++++++---------------
1 file changed, 23 insertions(+), 15 deletions(-)
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -39,6 +39,14 @@
static struct kmem_cache *idr_layer_cache;
static DEFINE_SPINLOCK(simple_ida_lock);
+/* the maximum ID which can be allocated given idr->layers */
+static int idr_max(int layers)
+{
+ int bits = min_t(int, layers * IDR_BITS, MAX_ID_SHIFT);
+
+ return (1 << bits) - 1;
+}
+
static struct idr_layer *get_from_free_list(struct idr *idp)
{
struct idr_layer *p;
@@ -223,7 +231,7 @@ build_up:
* Add a new layer to the top of the tree if the requested
* id is larger than the currently allocated space.
*/
- while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) {
+ while (id > idr_max(layers)) {
layers++;
if (!p->count) {
/* special case: if the tree is currently empty,
@@ -265,7 +273,7 @@ build_up:
static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
{
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
int id;
id = idr_get_empty_slot(idp, starting_id, pa);
@@ -357,7 +365,7 @@ static void idr_remove_warning(int id)
static void sub_remove(struct idr *idp, int shift, int id)
{
struct idr_layer *p = idp->top;
- struct idr_layer **pa[MAX_LEVEL];
+ struct idr_layer **pa[MAX_LEVEL + 1];
struct idr_layer ***paa = &pa[0];
struct idr_layer *to_free;
int n;
@@ -451,16 +459,16 @@ void idr_remove_all(struct idr *idp)
int n, id, max;
int bt_mask;
struct idr_layer *p;
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
struct idr_layer **paa = &pa[0];
n = idp->layers * IDR_BITS;
p = idp->top;
rcu_assign_pointer(idp->top, NULL);
- max = 1 << n;
+ max = idr_max(idp->layers);
id = 0;
- while (id < max) {
+ while (id >= 0 && id <= max) {
while (n > IDR_BITS && p) {
n -= IDR_BITS;
*paa++ = p;
@@ -519,7 +527,7 @@ void *idr_find(struct idr *idp, int id)
/* Mask off upper bits we don't use for the search. */
id &= MAX_ID_MASK;
- if (id >= (1 << n))
+ if (id > idr_max(p->layer + 1))
return NULL;
BUG_ON(n == 0);
@@ -555,15 +563,15 @@ int idr_for_each(struct idr *idp,
{
int n, id, max, error = 0;
struct idr_layer *p;
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
struct idr_layer **paa = &pa[0];
n = idp->layers * IDR_BITS;
p = rcu_dereference_raw(idp->top);
- max = 1 << n;
+ max = idr_max(idp->layers);
id = 0;
- while (id < max) {
+ while (id >= 0 && id <= max) {
while (n > 0 && p) {
n -= IDR_BITS;
*paa++ = p;
@@ -601,7 +609,7 @@ EXPORT_SYMBOL(idr_for_each);
*/
void *idr_get_next(struct idr *idp, int *nextidp)
{
- struct idr_layer *p, *pa[MAX_LEVEL];
+ struct idr_layer *p, *pa[MAX_LEVEL + 1];
struct idr_layer **paa = &pa[0];
int id = *nextidp;
int n, max;
@@ -611,9 +619,9 @@ void *idr_get_next(struct idr *idp, int
if (!p)
return NULL;
n = (p->layer + 1) * IDR_BITS;
- max = 1 << n;
+ max = idr_max(p->layer + 1);
- while (id < max) {
+ while (id >= 0 && id <= max) {
while (n > 0 && p) {
n -= IDR_BITS;
*paa++ = p;
@@ -787,7 +795,7 @@ EXPORT_SYMBOL(ida_pre_get);
*/
int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
{
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
struct ida_bitmap *bitmap;
unsigned long flags;
int idr_id = starting_id / IDA_BITMAP_BITS;
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 114/153] idr: fix top layer handling
2013-03-04 3:39 ` [ 114/153] idr: fix top layer handling Ben Hutchings
@ 2013-03-04 17:37 ` Luis Henriques
0 siblings, 0 replies; 172+ messages in thread
From: Luis Henriques @ 2013-03-04 17:37 UTC (permalink / raw)
To: Ben Hutchings
Cc: linux-kernel, stable, akpm, Tejun Heo, Rusty Russell,
Linus Torvalds
On Mon, Mar 04, 2013 at 03:39:01AM +0000, Ben Hutchings wrote:
> 3.2-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Tejun Heo <tj@kernel.org>
>
> commit 326cf0f0f308933c10236280a322031f0097205d upstream.
>
> Most functions in idr fail to deal with the high bits when the idr
> tree grows to the maximum height.
>
> * idr_get_empty_slot() stops growing idr tree once the depth reaches
> MAX_IDR_LEVEL - 1, which is one depth shallower than necessary to
> cover the whole range. The function doesn't even notice that it
> didn't grow the tree enough and ends up allocating the wrong ID
> given sufficiently high @starting_id.
>
> For example, on 64 bit, if the starting id is 0x7fffff01,
> idr_get_empty_slot() will grow the tree 5 layer deep, which only
> covers the 30 bits and then proceed to allocate as if the bit 30
> wasn't specified. It ends up allocating 0x3fffff01 without the bit
> 30 but still returns 0x7fffff01.
>
> * __idr_remove_all() will not remove anything if the tree is fully
> grown.
>
> * idr_find() can't find anything if the tree is fully grown.
>
> * idr_for_each() and idr_get_next() can't iterate anything if the tree
> is fully grown.
>
> Fix it by introducing idr_max() which returns the maximum possible ID
> given the depth of tree and replacing the id limit checks in all
> affected places.
>
> As the idr_layer pointer array pa[] needs to be 1 larger than the
> maximum depth, enlarge pa[] arrays by one.
>
> While this plugs the discovered issues, the whole code base is
> horrible and in desparate need of rewrite. It's fragile like hell,
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Cc: Rusty Russell <rusty@rustcorp.com.au>
>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
> [bwh: Backported to 3.2:
> - Adjust context
> - s/MAX_IDR_LEVEL/MAX_LEVEL/; s/MAX_IDR_SHIFT/MAX_ID_SHIFT/
> - Drop change to idr_alloc()]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
> lib/idr.c | 38 +++++++++++++++++++++++---------------
> 1 file changed, 23 insertions(+), 15 deletions(-)
>
> --- a/lib/idr.c
> +++ b/lib/idr.c
> @@ -39,6 +39,14 @@
> static struct kmem_cache *idr_layer_cache;
> static DEFINE_SPINLOCK(simple_ida_lock);
>
> +/* the maximum ID which can be allocated given idr->layers */
> +static int idr_max(int layers)
> +{
> + int bits = min_t(int, layers * IDR_BITS, MAX_ID_SHIFT);
> +
> + return (1 << bits) - 1;
> +}
> +
> static struct idr_layer *get_from_free_list(struct idr *idp)
> {
> struct idr_layer *p;
> @@ -223,7 +231,7 @@ build_up:
> * Add a new layer to the top of the tree if the requested
> * id is larger than the currently allocated space.
> */
> - while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) {
> + while (id > idr_max(layers)) {
> layers++;
> if (!p->count) {
> /* special case: if the tree is currently empty,
> @@ -265,7 +273,7 @@ build_up:
>
> static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
> {
> - struct idr_layer *pa[MAX_LEVEL];
> + struct idr_layer *pa[MAX_LEVEL + 1];
> int id;
>
> id = idr_get_empty_slot(idp, starting_id, pa);
> @@ -357,7 +365,7 @@ static void idr_remove_warning(int id)
> static void sub_remove(struct idr *idp, int shift, int id)
> {
> struct idr_layer *p = idp->top;
> - struct idr_layer **pa[MAX_LEVEL];
> + struct idr_layer **pa[MAX_LEVEL + 1];
> struct idr_layer ***paa = &pa[0];
> struct idr_layer *to_free;
> int n;
> @@ -451,16 +459,16 @@ void idr_remove_all(struct idr *idp)
> int n, id, max;
> int bt_mask;
> struct idr_layer *p;
> - struct idr_layer *pa[MAX_LEVEL];
> + struct idr_layer *pa[MAX_LEVEL + 1];
> struct idr_layer **paa = &pa[0];
>
> n = idp->layers * IDR_BITS;
> p = idp->top;
> rcu_assign_pointer(idp->top, NULL);
> - max = 1 << n;
> + max = idr_max(idp->layers);
>
> id = 0;
> - while (id < max) {
> + while (id >= 0 && id <= max) {
> while (n > IDR_BITS && p) {
> n -= IDR_BITS;
> *paa++ = p;
> @@ -519,7 +527,7 @@ void *idr_find(struct idr *idp, int id)
> /* Mask off upper bits we don't use for the search. */
> id &= MAX_ID_MASK;
>
> - if (id >= (1 << n))
> + if (id > idr_max(p->layer + 1))
> return NULL;
> BUG_ON(n == 0);
>
> @@ -555,15 +563,15 @@ int idr_for_each(struct idr *idp,
> {
> int n, id, max, error = 0;
> struct idr_layer *p;
> - struct idr_layer *pa[MAX_LEVEL];
> + struct idr_layer *pa[MAX_LEVEL + 1];
> struct idr_layer **paa = &pa[0];
>
> n = idp->layers * IDR_BITS;
> p = rcu_dereference_raw(idp->top);
> - max = 1 << n;
> + max = idr_max(idp->layers);
>
> id = 0;
> - while (id < max) {
> + while (id >= 0 && id <= max) {
> while (n > 0 && p) {
> n -= IDR_BITS;
> *paa++ = p;
> @@ -601,7 +609,7 @@ EXPORT_SYMBOL(idr_for_each);
> */
> void *idr_get_next(struct idr *idp, int *nextidp)
> {
> - struct idr_layer *p, *pa[MAX_LEVEL];
> + struct idr_layer *p, *pa[MAX_LEVEL + 1];
> struct idr_layer **paa = &pa[0];
> int id = *nextidp;
> int n, max;
> @@ -611,9 +619,9 @@ void *idr_get_next(struct idr *idp, int
> if (!p)
> return NULL;
> n = (p->layer + 1) * IDR_BITS;
> - max = 1 << n;
> + max = idr_max(p->layer + 1);
>
> - while (id < max) {
> + while (id >= 0 && id <= max) {
> while (n > 0 && p) {
> n -= IDR_BITS;
> *paa++ = p;
> @@ -787,7 +795,7 @@ EXPORT_SYMBOL(ida_pre_get);
> */
> int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
> {
> - struct idr_layer *pa[MAX_LEVEL];
> + struct idr_layer *pa[MAX_LEVEL + 1];
> struct ida_bitmap *bitmap;
> unsigned long flags;
> int idr_id = starting_id / IDA_BITMAP_BITS;
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
I've reviewed this backport and it looks correct to me. I've queued it
in the 3.5 tree as well.
Cheers,
--
Luis
^ permalink raw reply [flat|nested] 172+ messages in thread
* [ 115/153] sysctl: fix null checking in bin_dn_node_address()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (113 preceding siblings ...)
2013-03-04 3:39 ` [ 114/153] idr: fix top layer handling Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 116/153] nbd: fsync and kill block device on shutdown Ben Hutchings
` (39 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Xi Wang, Eric W. Biederman, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xi Wang <xi.wang@gmail.com>
commit df1778be1a33edffa51d094eeda87c858ded6560 upstream.
The null check of `strchr() + 1' is broken, which is always non-null,
leading to OOB read. Instead, check the result of strchr().
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/sysctl_binary.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1194,9 +1194,10 @@ static ssize_t bin_dn_node_address(struc
/* Convert the decnet address to binary */
result = -EIO;
- nodep = strchr(buf, '.') + 1;
+ nodep = strchr(buf, '.');
if (!nodep)
goto out;
+ ++nodep;
area = simple_strtoul(buf, NULL, 10);
node = simple_strtoul(nodep, NULL, 10);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 116/153] nbd: fsync and kill block device on shutdown
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (114 preceding siblings ...)
2013-03-04 3:39 ` [ 115/153] sysctl: fix null checking in bin_dn_node_address() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 117/153] igb: Remove artificial restriction on RQDPC stat reading Ben Hutchings
` (38 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Paolo Bonzini, Paul Clements, Alex Bligh, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini <pbonzini@redhat.com>
commit 3a2d63f87989e01437ba994df5f297528c353d7d upstream.
There are two problems with shutdown in the NBD driver.
1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem.
This patch adds the sync operation into __nbd_ioctl()'s
NBD_DISCONNECT handler. This is useful because BLKFLSBUF is restricted
to processes that have CAP_SYS_ADMIN, and the NBD client may not
possess it (fsync of the block device does not sync the filesystem,
either).
2: Once we clear the socket we have no guarantee that later reads will
come from the same backing storage.
The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket
clearing code so the page cache is cleaned, lest reads that hit on the
page cache will return stale data from the previously-accessible disk.
Example:
# qemu-nbd -r -c/dev/nbd0 /dev/sr0
# file -s /dev/nbd0
/dev/stdin: # UDF filesystem data (version 1.5) etc.
# qemu-nbd -d /dev/nbd0
# qemu-nbd -r -c/dev/nbd0 /dev/sda
# file -s /dev/nbd0
/dev/stdin: # UDF filesystem data (version 1.5) etc.
While /dev/sda has:
# file -s /dev/sda
/dev/sda: x86 boot sector; etc.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paul Clements <Paul.Clements@steeleye.com>
Cc: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
- Adjusted context
- s/\bnbd\b/lo/
- Incorporate export of kill_bdev() from commit ff01bb483265
('fs: move code out of buffer.c')]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -584,12 +584,20 @@ static int __nbd_ioctl(struct block_devi
struct request sreq;
dev_info(disk_to_dev(lo->disk), "NBD_DISCONNECT\n");
+ if (!lo->sock)
+ return -EINVAL;
+ mutex_unlock(&lo->tx_lock);
+ fsync_bdev(bdev);
+ mutex_lock(&lo->tx_lock);
blk_rq_init(NULL, &sreq);
sreq.cmd_type = REQ_TYPE_SPECIAL;
nbd_cmd(&sreq) = NBD_CMD_DISC;
+
+ /* Check again after getting mutex back. */
if (!lo->sock)
return -EINVAL;
+
nbd_send_req(lo, &sreq);
return 0;
}
@@ -603,6 +611,7 @@ static int __nbd_ioctl(struct block_devi
nbd_clear_que(lo);
BUG_ON(!list_empty(&lo->queue_head));
BUG_ON(!list_empty(&lo->waiting_queue));
+ kill_bdev(bdev);
if (file)
fput(file);
return 0;
@@ -683,6 +692,7 @@ static int __nbd_ioctl(struct block_devi
lo->file = NULL;
nbd_clear_que(lo);
dev_warn(disk_to_dev(lo->disk), "queue cleared\n");
+ kill_bdev(bdev);
if (file)
fput(file);
lo->bytesize = 0;
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -82,13 +82,14 @@ sector_t blkdev_max_block(struct block_d
}
/* Kill _all_ buffers and pagecache , dirty or not.. */
-static void kill_bdev(struct block_device *bdev)
+void kill_bdev(struct block_device *bdev)
{
if (bdev->bd_inode->i_mapping->nrpages == 0)
return;
invalidate_bh_lrus();
truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
}
+EXPORT_SYMBOL(kill_bdev);
int set_blocksize(struct block_device *bdev, int size)
{
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2103,6 +2103,7 @@ extern void bd_forget(struct inode *inod
extern void bdput(struct block_device *);
extern void invalidate_bdev(struct block_device *);
extern int sync_blockdev(struct block_device *bdev);
+extern void kill_bdev(struct block_device *);
extern struct super_block *freeze_bdev(struct block_device *);
extern void emergency_thaw_all(void);
extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
@@ -2110,6 +2111,7 @@ extern int fsync_bdev(struct block_devic
#else
static inline void bd_forget(struct inode *inode) {}
static inline int sync_blockdev(struct block_device *bdev) { return 0; }
+static inline void kill_bdev(struct block_device *bdev) {}
static inline void invalidate_bdev(struct block_device *bdev) {}
static inline struct super_block *freeze_bdev(struct block_device *sb)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 117/153] igb: Remove artificial restriction on RQDPC stat reading
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (115 preceding siblings ...)
2013-03-04 3:39 ` [ 116/153] nbd: fsync and kill block device on shutdown Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 118/153] drm/radeon/evergreen+: wait for the MC to settle after MC blackout Ben Hutchings
` (37 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Alexander Duyck, Jeff Pieper, Jeff Kirsher
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Duyck <alexander.h.duyck@intel.com>
commit ae1c07a6b7ced6c0c94c99e3b53f4e7856fa8bff upstream.
For some reason the reading of the RQDPC register was being artificially
limited to 4K. Instead of limiting the value we should read the value and
add the full amount. Otherwise this can lead to a misleading number of
dropped packets when the actual value is in fact much higher.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/ethernet/intel/igb/igb_main.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 19d7666..246646b 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4681,11 +4681,13 @@ void igb_update_stats(struct igb_adapter *adapter,
bytes = 0;
packets = 0;
for (i = 0; i < adapter->num_rx_queues; i++) {
- u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
+ u32 rqdpc = rd32(E1000_RQDPC(i));
struct igb_ring *ring = adapter->rx_ring[i];
- ring->rx_stats.drops += rqdpc_tmp;
- net_stats->rx_fifo_errors += rqdpc_tmp;
+ if (rqdpc) {
+ ring->rx_stats.drops += rqdpc;
+ net_stats->rx_fifo_errors += rqdpc;
+ }
do {
start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 118/153] drm/radeon/evergreen+: wait for the MC to settle after MC blackout
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (116 preceding siblings ...)
2013-03-04 3:39 ` [ 117/153] igb: Remove artificial restriction on RQDPC stat reading Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 119/153] s390/timer: avoid overflow when programming clock comparator Ben Hutchings
` (36 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Alex Deucher
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit ed39fadd6df01095378e499fac3674883f16b853 upstream.
Some chips seem to need a little delay after blacking out
the MC before the requests actually stop.
May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=56139
https://bugs.freedesktop.org/show_bug.cgi?id=57567
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/gpu/drm/radeon/evergreen.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1137,6 +1137,8 @@ void evergreen_mc_stop(struct radeon_dev
blackout &= ~BLACKOUT_MODE_MASK;
WREG32(MC_SHARED_BLACKOUT_CNTL, blackout | 1);
}
+ /* wait for the MC to settle */
+ udelay(100);
}
void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 119/153] s390/timer: avoid overflow when programming clock comparator
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (117 preceding siblings ...)
2013-03-04 3:39 ` [ 118/153] drm/radeon/evergreen+: wait for the MC to settle after MC blackout Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 120/153] unbreak automounter support on 64-bit kernel with 32-bit userspace (v2) Ben Hutchings
` (35 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Heiko Carstens, Christian Borntraeger
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <heiko.carstens@de.ibm.com>
commit d911e03d097bdc01363df5d81c43f69432eb785c upstream.
Since ed4f209 "s390/time: fix sched_clock() overflow" a new helper function
is used to avoid overflows when converting TOD format values to nanosecond
values.
The kvm interrupt code formerly however only worked by accident because of
an overflow. It tried to program a timer that would expire in more than ~29
years. Because of the old TOD-to-nanoseconds overflow bug the real expiry
value however was much smaller, but now it isn't anymore.
This however triggers yet another bug in the function that programs the clock
comparator s390_next_ktime(): if the absolute "expires" value is after 2042
this will result in an overflow and the programmed value is lower than the
current TOD value which immediatly triggers a clock comparator (= timer)
interrupt.
Since the timer isn't expired it will be programmed immediately again and so
on... the result is a dead system.
To fix this simply program the maximum possible value if an overflow is
detected.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/s390/kernel/time.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index a5f4f5a..0aa98db 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -120,6 +120,9 @@ static int s390_next_ktime(ktime_t expires,
nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
do_div(nsecs, 125);
S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
+ /* Program the maximum value if we have an overflow (== year 2042) */
+ if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
+ S390_lowcore.clock_comparator = -1ULL;
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 120/153] unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (118 preceding siblings ...)
2013-03-04 3:39 ` [ 119/153] s390/timer: avoid overflow when programming clock comparator Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 121/153] xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}() Ben Hutchings
` (34 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Helge Deller, H. Peter Anvin, Ian Kent, Catalin Marinas,
James Bottomley, Rolf Eike Beer
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <deller@gmx.de>
commit 4f4ffc3a5398ef9bdbb32db04756d7d34e356fcf upstream.
automount-support is broken on the parisc architecture, because the existing
#if list does not include a check for defined(__hppa__). The HPPA (parisc)
architecture is similiar to other 64bit Linux targets where we have to define
autofs_wqt_t (which is passed back and forth to user space) as int type which
has a size of 32bit across 32 and 64bit kernels.
During the discussion on the mailing list, H. Peter Anvin suggested to invert
the #if list since only specific platforms (specifically those who do not have
a 32bit userspace, like IA64 and Alpha) should have autofs_wqt_t as unsigned
long type.
This suggestion is probably the best way to go, since Arm64 (and maybe others?)
seems to have a non-working automounter. So in the long run even for other new
upcoming architectures this inverted check seem to be the best solution, since
it will not require them to change this #if again (unless they are 64bit only).
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Rolf Eike Beer <eike-kernel@sf-tec.de>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -31,25 +31,16 @@
#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION
/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this. This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode 32 bit 64 bit
- * -------------------------
- * int 32 bit 32 bit
- * long 32 bit 64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
+ * The wait_queue_token (autofs_wqt_t) is part of a structure which is passed
+ * back to the kernel via ioctl from userspace. On architectures where 32- and
+ * 64-bit userspace binaries can be executed it's important that the size of
+ * autofs_wqt_t stays constant between 32- and 64-bit Linux kernels so that we
+ * do not break the binary ABI interface by changing the structure size.
*/
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
+#if defined(__ia64__) || defined(__alpha__) /* pure 64bit architectures */
typedef unsigned long autofs_wqt_t;
+#else
+typedef unsigned int autofs_wqt_t;
#endif
/* Packet types */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 121/153] xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (119 preceding siblings ...)
2013-03-04 3:39 ` [ 120/153] unbreak automounter support on 64-bit kernel with 32-bit userspace (v2) Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 122/153] bridge: set priority of STP packets Ben Hutchings
` (33 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Jan Beulich, Ian Campbell, Konrad Rzeszutek Wilk
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Beulich <jbeulich@suse.com>
commit 51ac8893a7a51b196501164e645583bf78138699 upstream.
... as being guest triggerable (e.g. by invoking
XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable).
This is CVE-2013-0231 / XSA-43.
Also make the two messages uniform in both their wording and severity.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[bwh: Backported to 3.2: add #include <linux/ratelimited.h>, needed by
printk_ratelimited()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/xen/xen-pciback/pciback_ops.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -8,6 +8,7 @@
#include <linux/bitops.h>
#include <xen/events.h>
#include <linux/sched.h>
+#include <linux/ratelimit.h>
#include "pciback.h"
int verbose_request;
@@ -135,7 +136,6 @@ int xen_pcibk_enable_msi(struct xen_pcib
struct pci_dev *dev, struct xen_pci_op *op)
{
struct xen_pcibk_dev_data *dev_data;
- int otherend = pdev->xdev->otherend_id;
int status;
if (unlikely(verbose_request))
@@ -144,8 +144,9 @@ int xen_pcibk_enable_msi(struct xen_pcib
status = pci_enable_msi(dev);
if (status) {
- printk(KERN_ERR "error enable msi for guest %x status %x\n",
- otherend, status);
+ pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI for guest %u: err %d\n",
+ pci_name(dev), pdev->xdev->otherend_id,
+ status);
op->value = 0;
return XEN_PCI_ERR_op_failed;
}
@@ -223,10 +224,10 @@ int xen_pcibk_enable_msix(struct xen_pci
pci_name(dev), i,
op->msix_entries[i].vector);
}
- } else {
- printk(KERN_WARNING DRV_NAME ": %s: failed to enable MSI-X: err %d!\n",
- pci_name(dev), result);
- }
+ } else
+ pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI-X for guest %u: err %d!\n",
+ pci_name(dev), pdev->xdev->otherend_id,
+ result);
kfree(entries);
op->value = result;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 122/153] bridge: set priority of STP packets
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (120 preceding siblings ...)
2013-03-04 3:39 ` [ 121/153] xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 123/153] xen-netback: correctly return errors from netbk_count_requests() Ben Hutchings
` (32 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Stephen Hemminger, David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephen Hemminger <stephen@networkplumber.org>
[ Upstream commit 547b4e718115eea74087e28d7fa70aec619200db ]
Spanning Tree Protocol packets should have always been marked as
control packets, this causes them to get queued in the high prirority
FIFO. As Radia Perlman mentioned in her LCA talk, STP dies if bridge
gets overloaded and can't communicate. This is a long-standing bug back
to the first versions of Linux bridge.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
net/bridge/br_stp_bpdu.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index e16aade..718cbe8 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -16,6 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/llc.h>
#include <linux/slab.h>
+#include <linux/pkt_sched.h>
#include <net/net_namespace.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
@@ -40,6 +41,7 @@ static void br_send_bpdu(struct net_bridge_port *p,
skb->dev = p->dev;
skb->protocol = htons(ETH_P_802_2);
+ skb->priority = TC_PRIO_CONTROL;
skb_reserve(skb, LLC_RESERVE);
memcpy(__skb_put(skb, length), data, length);
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 123/153] xen-netback: correctly return errors from netbk_count_requests()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (121 preceding siblings ...)
2013-03-04 3:39 ` [ 122/153] bridge: set priority of STP packets Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 124/153] xen-netback: cancel the credit timer when taking the vif down Ben Hutchings
` (31 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, David Vrabel, Wei Liu, Jan Beulich, Christopher S. Aker,
Ian Campbell, David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Vrabel <david.vrabel@citrix.com>
[ Upstream commit 35876b5ffc154c357476b2c3bdab10feaf4bd8f0 ]
netbk_count_requests() could detect an error, call
netbk_fatal_tx_error() but return 0. The vif may then be used
afterwards (e.g., in a call to netbk_tx_error().
Since netbk_fatal_tx_error() could set vif->refcnt to 1, the vif may
be freed immediately after the call to netbk_fatal_tx_error() (e.g.,
if the vif is also removed).
Netback thread Xenwatch thread
-------------------------------------------
netbk_fatal_tx_err() netback_remove()
xenvif_disconnect()
...
free_netdev()
netbk_tx_err() Oops!
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Christopher S. Aker <caker@theshore.net>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/xen-netback/netback.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index b802bb3..185a0eb 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -883,13 +883,13 @@ static int netbk_count_requests(struct xenvif *vif,
if (frags >= work_to_do) {
netdev_err(vif->dev, "Need more frags\n");
netbk_fatal_tx_err(vif);
- return -frags;
+ return -ENODATA;
}
if (unlikely(frags >= MAX_SKB_FRAGS)) {
netdev_err(vif->dev, "Too many frags\n");
netbk_fatal_tx_err(vif);
- return -frags;
+ return -E2BIG;
}
memcpy(txp, RING_GET_REQUEST(&vif->tx, cons + frags),
@@ -897,7 +897,7 @@ static int netbk_count_requests(struct xenvif *vif,
if (txp->size > first->size) {
netdev_err(vif->dev, "Frag is bigger than frame.\n");
netbk_fatal_tx_err(vif);
- return -frags;
+ return -EIO;
}
first->size -= txp->size;
@@ -907,7 +907,7 @@ static int netbk_count_requests(struct xenvif *vif,
netdev_err(vif->dev, "txp->offset: %x, size: %u\n",
txp->offset, txp->size);
netbk_fatal_tx_err(vif);
- return -frags;
+ return -EINVAL;
}
} while ((txp++)->flags & XEN_NETTXF_more_data);
return frags;
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 124/153] xen-netback: cancel the credit timer when taking the vif down
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (122 preceding siblings ...)
2013-03-04 3:39 ` [ 123/153] xen-netback: correctly return errors from netbk_count_requests() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 125/153] ipv4: fix a bug in ping_err() Ben Hutchings
` (30 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, David Vrabel, Ian Campbell, Christopher S. Aker,
David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Vrabel <david.vrabel@citrix.com>
[ Upstream commit 3e55f8b306cf305832a4ac78aa82e1b40e818ece ]
If the credit timer is left armed after calling
xen_netbk_remove_xenvif(), then it may fire and attempt to schedule
the vif which will then oops as vif->netbk == NULL.
This may happen both in the fatal error path and during normal
disconnection from the front end.
The sequencing during shutdown is critical to ensure that: a)
vif->netbk doesn't become unexpectedly NULL; and b) the net device/vif
is not freed.
1. Mark as unschedulable (netif_carrier_off()).
2. Synchronously cancel the timer.
3. Remove the vif from the schedule list.
4. Remove it from it netback thread group.
5. Wait for vif->refcnt to become 0.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reported-by: Christopher S. Aker <caker@theshore.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/xen-netback/interface.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 5925e0b..8eaf0e2 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -132,6 +132,7 @@ static void xenvif_up(struct xenvif *vif)
static void xenvif_down(struct xenvif *vif)
{
disable_irq(vif->irq);
+ del_timer_sync(&vif->credit_timeout);
xen_netbk_deschedule_xenvif(vif);
xen_netbk_remove_xenvif(vif);
}
@@ -362,8 +363,6 @@ void xenvif_disconnect(struct xenvif *vif)
atomic_dec(&vif->refcnt);
wait_event(vif->waiting_to_free, atomic_read(&vif->refcnt) == 0);
- del_timer_sync(&vif->credit_timeout);
-
if (vif->irq)
unbind_from_irqhandler(vif->irq, vif);
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 125/153] ipv4: fix a bug in ping_err().
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (123 preceding siblings ...)
2013-03-04 3:39 ` [ 124/153] xen-netback: cancel the credit timer when taking the vif down Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 126/153] ipv6: use a stronger hash for tcp Ben Hutchings
` (29 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Li Wei, David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Wei <lw@cn.fujitsu.com>
[ Upstream commit b531ed61a2a2a77eeb2f7c88b49aa5ec7d9880d8 ]
We should get 'type' and 'code' from the outer ICMP header.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
net/ipv4/ping.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 43d4c3b..294a380 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -321,8 +321,8 @@ void ping_err(struct sk_buff *skb, u32 info)
struct iphdr *iph = (struct iphdr *)skb->data;
struct icmphdr *icmph = (struct icmphdr *)(skb->data+(iph->ihl<<2));
struct inet_sock *inet_sock;
- int type = icmph->type;
- int code = icmph->code;
+ int type = icmp_hdr(skb)->type;
+ int code = icmp_hdr(skb)->code;
struct net *net = dev_net(skb->dev);
struct sock *sk;
int harderr;
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 126/153] ipv6: use a stronger hash for tcp
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (124 preceding siblings ...)
2013-03-04 3:39 ` [ 125/153] ipv4: fix a bug in ping_err() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 127/153] staging: comedi: ni_labpc: correct differential channel sequence for AI commands Ben Hutchings
` (28 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Eric Dumazet, Neal Cardwell, Yuchung Cheng, David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit 08dcdbf6a7b9d14c2302c5bd0c5390ddf122f664 ]
It looks like its possible to open thousands of TCP IPv6
sessions on a server, all landing in a single slot of TCP hash
table. Incoming packets have to lookup sockets in a very
long list.
We should hash all bits from foreign IPv6 addresses, using
a salt and hash mix, not a simple XOR.
inet6_ehashfn() can also separately use the ports, instead
of xoring them.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/net/inet6_hashtables.h | 8 ++++----
include/net/inet_sock.h | 1 +
include/net/ipv6.h | 12 ++++++++++++
net/ipv4/af_inet.c | 9 +++++++--
4 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index e46674d..f9ce2fa 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -28,16 +28,16 @@
struct inet_hashinfo;
-/* I have no idea if this is a good hash for v6 or not. -DaveM */
static inline unsigned int inet6_ehashfn(struct net *net,
const struct in6_addr *laddr, const u16 lport,
const struct in6_addr *faddr, const __be16 fport)
{
- u32 ports = (lport ^ (__force u16)fport);
+ u32 ports = (((u32)lport) << 16) | (__force u32)fport;
return jhash_3words((__force u32)laddr->s6_addr32[3],
- (__force u32)faddr->s6_addr32[3],
- ports, inet_ehash_secret + net_hash_mix(net));
+ ipv6_addr_jhash(faddr),
+ ports,
+ inet_ehash_secret + net_hash_mix(net));
}
static inline int inet6_sk_ehashfn(const struct sock *sk)
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index f941964..ee4ee91 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -199,6 +199,7 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to,
extern int inet_sk_rebuild_header(struct sock *sk);
extern u32 inet_ehash_secret;
+extern u32 ipv6_hash_secret;
extern void build_ehash_secret(void);
static inline unsigned int inet_ehashfn(struct net *net,
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index a366a8a..4d549cf 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -15,6 +15,7 @@
#include <linux/ipv6.h>
#include <linux/hardirq.h>
+#include <linux/jhash.h>
#include <net/if_inet6.h>
#include <net/ndisc.h>
#include <net/flow.h>
@@ -386,6 +387,17 @@ struct ip6_create_arg {
void ip6_frag_init(struct inet_frag_queue *q, void *a);
int ip6_frag_match(struct inet_frag_queue *q, void *a);
+/* more secured version of ipv6_addr_hash() */
+static inline u32 ipv6_addr_jhash(const struct in6_addr *a)
+{
+ u32 v = (__force u32)a->s6_addr32[0] ^ (__force u32)a->s6_addr32[1];
+
+ return jhash_3words(v,
+ (__force u32)a->s6_addr32[2],
+ (__force u32)a->s6_addr32[3],
+ ipv6_hash_secret);
+}
+
static inline int ipv6_addr_any(const struct in6_addr *a)
{
return (a->s6_addr32[0] | a->s6_addr32[1] |
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 1b5096a..5d228de 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -226,8 +226,12 @@ EXPORT_SYMBOL(inet_listen);
u32 inet_ehash_secret __read_mostly;
EXPORT_SYMBOL(inet_ehash_secret);
+u32 ipv6_hash_secret __read_mostly;
+EXPORT_SYMBOL(ipv6_hash_secret);
+
/*
- * inet_ehash_secret must be set exactly once
+ * inet_ehash_secret must be set exactly once, and to a non nul value
+ * ipv6_hash_secret must be set exactly once.
*/
void build_ehash_secret(void)
{
@@ -237,7 +241,8 @@ void build_ehash_secret(void)
get_random_bytes(&rnd, sizeof(rnd));
} while (rnd == 0);
- cmpxchg(&inet_ehash_secret, 0, rnd);
+ if (cmpxchg(&inet_ehash_secret, 0, rnd) == 0)
+ get_random_bytes(&ipv6_hash_secret, sizeof(ipv6_hash_secret));
}
EXPORT_SYMBOL(build_ehash_secret);
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 127/153] staging: comedi: ni_labpc: correct differential channel sequence for AI commands
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (125 preceding siblings ...)
2013-03-04 3:39 ` [ 126/153] ipv6: use a stronger hash for tcp Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 128/153] staging: comedi: ni_labpc: set up command4 register *after* command3 Ben Hutchings
` (27 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Ian Abbott
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Abbott <abbotti@mev.co.uk>
commit 4c4bc25d0fa6beaf054c0b4c3b324487f266c820 upstream.
Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings. He tracked it down to two
problems, one of which is addressed by this patch.
It seems the setting of the channel bits for particular scanning modes
was incorrect for differential mode. (Only half the number of channels
are available in differential mode; comedi refers to them as channels 0,
1, 2 and 3, but the hardware documentation refers to them as channels 0,
2, 4 and 6.) In differential mode, the setting of the channel enable
bits in the command1 register should depend on whether the scan enable
bit is set. Effectively, we need to double the comedi channel number
when the scan enable bit is not set in differential mode. The scan
enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or
`MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is
`MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`. The existing test
for whether the comedi channel number needs to be doubled in
differential mode is incorrect in `labpc_ai_cmd()`. This patch corrects
the test.
Thanks to Tuomas for suggesting the fix.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/staging/comedi/drivers/ni_labpc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1264,7 +1264,9 @@ static int labpc_ai_cmd(struct comedi_de
else
channel = CR_CHAN(cmd->chanlist[0]);
/* munge channel bits for differential / scan disabled mode */
- if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF)
+ if ((labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN ||
+ labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN_INTERVAL) &&
+ aref == AREF_DIFF)
channel *= 2;
devpriv->command1_bits |= ADC_CHAN_BITS(channel);
devpriv->command1_bits |= thisboard->ai_range_code[range];
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 128/153] staging: comedi: ni_labpc: set up command4 register *after* command3
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (126 preceding siblings ...)
2013-03-04 3:39 ` [ 127/153] staging: comedi: ni_labpc: correct differential channel sequence for AI commands Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 129/153] pstore: Avoid deadlock in panic and emergency-restart path Ben Hutchings
` (26 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Ian Abbott
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Abbott <abbotti@mev.co.uk>
commit 22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.
Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings. He tracked it down to two
problems, one of which is addressed by this patch.
It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register. Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.
Thanks to Tuomas for suggesting the fix.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/staging/comedi/drivers/ni_labpc.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1282,21 +1282,6 @@ static int labpc_ai_cmd(struct comedi_de
devpriv->write_byte(devpriv->command1_bits,
dev->iobase + COMMAND1_REG);
}
- /* setup any external triggering/pacing (command4 register) */
- devpriv->command4_bits = 0;
- if (cmd->convert_src != TRIG_EXT)
- devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
- /* XXX should discard first scan when using interval scanning
- * since manual says it is not synced with scan clock */
- if (labpc_use_continuous_mode(cmd) == 0) {
- devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
- if (cmd->scan_begin_src == TRIG_EXT)
- devpriv->command4_bits |= EXT_SCAN_EN_BIT;
- }
- /* single-ended/differential */
- if (aref == AREF_DIFF)
- devpriv->command4_bits |= ADC_DIFF_BIT;
- devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
devpriv->write_byte(cmd->chanlist_len,
dev->iobase + INTERVAL_COUNT_REG);
@@ -1376,6 +1361,22 @@ static int labpc_ai_cmd(struct comedi_de
devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+ /* setup any external triggering/pacing (command4 register) */
+ devpriv->command4_bits = 0;
+ if (cmd->convert_src != TRIG_EXT)
+ devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+ /* XXX should discard first scan when using interval scanning
+ * since manual says it is not synced with scan clock */
+ if (labpc_use_continuous_mode(cmd) == 0) {
+ devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
+ if (cmd->scan_begin_src == TRIG_EXT)
+ devpriv->command4_bits |= EXT_SCAN_EN_BIT;
+ }
+ /* single-ended/differential */
+ if (aref == AREF_DIFF)
+ devpriv->command4_bits |= ADC_DIFF_BIT;
+ devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+
/* startup acquisition */
/* command2 reg */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 129/153] pstore: Avoid deadlock in panic and emergency-restart path
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (127 preceding siblings ...)
2013-03-04 3:39 ` [ 128/153] staging: comedi: ni_labpc: set up command4 register *after* command3 Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 130/153] ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDs Ben Hutchings
` (25 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Seiji Aguchi, Don Zickus, Tony Luck
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seiji Aguchi <seiji.aguchi@hds.com>
commit 9f244e9cfd70c7c0f82d3c92ce772ab2a92d9f64 upstream.
[Issue]
When pstore is in panic and emergency-restart paths, it may be blocked
in those paths because it simply takes spin_lock.
This is an example scenario which pstore may hang up in a panic path:
- cpuA grabs psinfo->buf_lock
- cpuB panics and calls smp_send_stop
- smp_send_stop sends IRQ to cpuA
- after 1 second, cpuB gives up on cpuA and sends an NMI instead
- cpuA is now in an NMI handler while still holding buf_lock
- cpuB is deadlocked
This case may happen if a firmware has a bug and
cpuA is stuck talking with it more than one second.
Also, this is a similar scenario in an emergency-restart path:
- cpuA grabs psinfo->buf_lock and stucks in a firmware
- cpuB kicks emergency-restart via either sysrq-b or hangcheck timer.
And then, cpuB is deadlocked by taking psinfo->buf_lock again.
[Solution]
This patch avoids the deadlocking issues in both panic and emergency_restart
paths by introducing a function, is_non_blocking_path(), to check if a cpu
can be blocked in current path.
With this patch, pstore is not blocked even if another cpu has
taken a spin_lock, in those paths by changing from spin_lock_irqsave
to spin_trylock_irqsave.
In addition, according to a comment of emergency_restart() in kernel/sys.c,
spin_lock shouldn't be taken in an emergency_restart path to avoid
deadlock. This patch fits the comment below.
<snip>
/**
* emergency_restart - reboot the system
*
* Without shutting down any hardware or taking any locks
* reboot the system. This is called when we know we are in
* trouble so this is our best effort to reboot. This is
* safe to call in interrupt context.
*/
void emergency_restart(void)
<snip>
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
[bwh: Backported to 3.2:
- Adjust context
- Add #include <linux/kmsg_dump.h>]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -72,6 +72,27 @@ static char *reason_str[] = {
"Oops", "Panic", "Kexec", "Restart", "Halt", "Poweroff", "Emergency"
};
+bool pstore_cannot_block_path(enum kmsg_dump_reason reason)
+{
+ /*
+ * In case of NMI path, pstore shouldn't be blocked
+ * regardless of reason.
+ */
+ if (in_nmi())
+ return true;
+
+ switch (reason) {
+ /* In panic case, other cpus are stopped by smp_send_stop(). */
+ case KMSG_DUMP_PANIC:
+ /* Emergency restart shouldn't be blocked by spin lock. */
+ case KMSG_DUMP_EMERG:
+ return true;
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(pstore_cannot_block_path);
+
/*
* callback from kmsg_dump. (s2,l2) has the most recently
* written bytes, older bytes are in (s1,l1). Save as much
@@ -97,10 +118,12 @@ static void pstore_dump(struct kmsg_dump
else
why = "Unknown";
- if (in_nmi()) {
- is_locked = spin_trylock(&psinfo->buf_lock);
- if (!is_locked)
- pr_err("pstore dump routine blocked in NMI, may corrupt error record\n");
+ if (pstore_cannot_block_path(reason)) {
+ is_locked = spin_trylock_irqsave(&psinfo->buf_lock, flags);
+ if (!is_locked) {
+ pr_err("pstore dump routine blocked in %s path, may corrupt error record\n"
+ , in_nmi() ? "NMI" : why);
+ }
} else
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
@@ -131,9 +154,9 @@ static void pstore_dump(struct kmsg_dump
total += l1_cpy + l2_cpy;
part++;
}
- if (in_nmi()) {
+ if (pstore_cannot_block_path(reason)) {
if (is_locked)
- spin_unlock(&psinfo->buf_lock);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
} else
spin_unlock_irqrestore(&psinfo->buf_lock, flags);
}
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -22,6 +22,8 @@
#ifndef _LINUX_PSTORE_H
#define _LINUX_PSTORE_H
+#include <linux/kmsg_dump.h>
+
/* types */
enum pstore_type_id {
PSTORE_TYPE_DMESG = 0,
@@ -50,6 +52,7 @@ struct pstore_info {
#ifdef CONFIG_PSTORE
extern int pstore_register(struct pstore_info *);
+extern bool pstore_cannot_block_path(enum kmsg_dump_reason reason);
extern int pstore_write(enum pstore_type_id type, char *buf, size_t size);
#else
static inline int
@@ -57,6 +60,11 @@ pstore_register(struct pstore_info *psi)
{
return -ENODEV;
}
+static inline bool
+pstore_cannot_block_path(enum kmsg_dump_reason reason)
+{
+ return false;
+}
static inline int
pstore_write(enum pstore_type_id type, char *buf, size_t size)
{
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 130/153] ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDs
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (128 preceding siblings ...)
2013-03-04 3:39 ` [ 129/153] pstore: Avoid deadlock in panic and emergency-restart path Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 131/153] ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs Ben Hutchings
` (24 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Seth Heasley, Jeff Garzik
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seth Heasley <seth.heasley@intel.com>
commit 78140cfec503c60a178b11fbaae2fef63e9abdc0 upstream.
This patch adds the IDE-mode SATA DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/ata/ata_piix.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -321,6 +321,14 @@ static const struct pci_device_id piix_p
{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
{ 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 131/153] ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (129 preceding siblings ...)
2013-03-04 3:39 ` [ 130/153] ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDs Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 132/153] ata_piix: Add Device IDs for Intel Lynx Point-LP PCH Ben Hutchings
` (23 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Seth Heasley, Jeff Garzik
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seth Heasley <seth.heasley@intel.com>
commit 96d5d96aedc29c75bb16433f6ecf8664ec3c1b46 upstream.
This patch adds the IDE-mode SATA DeviceIDs for the Intel DH89xxCC PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/ata/ata_piix.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -329,6 +329,8 @@ static const struct pci_device_id piix_p
{ 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Lynx Point) */
{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (DH89xxCC) */
+ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 132/153] ata_piix: Add Device IDs for Intel Lynx Point-LP PCH
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (130 preceding siblings ...)
2013-03-04 3:39 ` [ 131/153] ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 133/153] ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs Ben Hutchings
` (22 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, James Ralston, Jeff Garzik
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Ralston <james.d.ralston@intel.com>
commit 389cd784969e9148fedcde0608f15bd74d6b769e upstream.
This patch adds the IDE-mode SATA Device IDs for the Intel Lynx Point-LP PCH
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/ata/ata_piix.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -329,6 +329,14 @@ static const struct pci_device_id piix_p
{ 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Lynx Point) */
{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (DH89xxCC) */
{ 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 133/153] ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (131 preceding siblings ...)
2013-03-04 3:39 ` [ 132/153] ata_piix: Add Device IDs for Intel Lynx Point-LP PCH Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 134/153] ata_piix: Add Device IDs for Intel Wellsburg PCH Ben Hutchings
` (21 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Seth Heasley, Jeff Garzik
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seth Heasley <seth.heasley@intel.com>
commit aaa515277db9585eeb4fdeb4637b9f9df50a1dd9 upstream.
This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/ata/ata_piix.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -339,6 +339,14 @@ static const struct pci_device_id piix_p
{ 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (DH89xxCC) */
{ 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
{ } /* terminate list */
};
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 134/153] ata_piix: Add Device IDs for Intel Wellsburg PCH
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (132 preceding siblings ...)
2013-03-04 3:39 ` [ 133/153] ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 135/153] [hid] usb hid quirks for Masterkit MA901 usb radio Ben Hutchings
` (20 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, James Ralston, Jeff Garzik
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Ralston <james.d.ralston@intel.com>
commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream.
This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH
Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/ata/ata_piix.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -347,6 +347,15 @@ static const struct pci_device_id piix_p
{ 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Avoton) */
{ 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+
{ } /* terminate list */
};
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 135/153] [hid] usb hid quirks for Masterkit MA901 usb radio
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (133 preceding siblings ...)
2013-03-04 3:39 ` [ 134/153] ata_piix: Add Device IDs for Intel Wellsburg PCH Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 136/153] [media] Avoid sysfs oops when an rc_devs raw device is absent Ben Hutchings
` (19 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Alexey Klimov, Hans Verkuil, Jiri Kosina,
Mauro Carvalho Chehab
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Klimov <klimov.linux@gmail.com>
commit 0322bd3980b3ebf7dde8474e22614cb443d6479a upstream.
Don't let Masterkit MA901 USB radio be handled by usb hid drivers.
This device will be handled by radio-ma901.c driver.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/hid/hid-core.c | 1 +
drivers/hid/hid-ids.h | 3 +++
2 files changed, 4 insertions(+)
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1900,6 +1900,7 @@ static const struct hid_device_id hid_ig
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -506,6 +506,9 @@
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+#define USB_VENDOR_ID_MASTERKIT 0x16c0
+#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 136/153] [media] Avoid sysfs oops when an rc_devs raw device is absent
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (134 preceding siblings ...)
2013-03-04 3:39 ` [ 135/153] [hid] usb hid quirks for Masterkit MA901 usb radio Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 137/153] [media] rc: unlock on error in show_protocols() Ben Hutchings
` (18 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Douglas Bagnall, Mauro Carvalho Chehab
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Douglas Bagnall <douglas@paradise.net.nz>
commit 720bb6436ff30fccad05cf5bdf961ea5b1f5686d upstream.
For some reason, when the lirc daemon learns that a usb remote control
has been unplugged, it wants to read the sysfs attributes of the
disappearing device. This is useful for uncovering transient
inconsistencies, but less so for keeping the system running when such
inconsistencies exist.
Under some circumstances (like every time I unplug my dvb stick from
my laptop), lirc catches an rc_dev whose raw event handler has been
removed (presumably by ir_raw_event_unregister), and proceeds to
interrogate the raw protocols supported by the NULL pointer.
This patch avoids the NULL dereference, and ignores the issue of how
this state of affairs came about in the first place.
Version 2 incorporates changes recommended by Mauro Carvalho Chehab
(-ENODEV instead of -EINVAL, and a signed-off-by).
Signed-off-by: Douglas Bagnall <douglas@paradise.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/media/rc/rc-main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -774,10 +774,11 @@ static ssize_t show_protocols(struct dev
if (dev->driver_type == RC_DRIVER_SCANCODE) {
enabled = dev->rc_map.rc_type;
allowed = dev->allowed_protos;
- } else {
+ } else if (dev->raw) {
enabled = dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
- }
+ } else
+ return -ENODEV;
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 137/153] [media] rc: unlock on error in show_protocols()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (135 preceding siblings ...)
2013-03-04 3:39 ` [ 136/153] [media] Avoid sysfs oops when an rc_devs raw device is absent Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 138/153] vhost: fix length for cross region descriptor Ben Hutchings
` (17 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Dan Carpenter, Herton R. Krzesinski, Douglas Bagnall,
Mauro Carvalho Chehab
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <dan.carpenter@oracle.com>
commit 30ebc5e44d057a1619ad63fe32c8c1670c37c4b8 upstream.
We recently introduced a new return -ENODEV in this function but we need
to unlock before returning.
[mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch]
Acked-by: Herton R. Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Douglas Bagnall <douglas@paradise.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/media/rc/rc-main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -777,8 +777,10 @@ static ssize_t show_protocols(struct dev
} else if (dev->raw) {
enabled = dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
- } else
+ } else {
+ mutex_unlock(&dev->lock);
return -ENODEV;
+ }
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
(long long)allowed,
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 138/153] vhost: fix length for cross region descriptor
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (136 preceding siblings ...)
2013-03-04 3:39 ` [ 137/153] [media] rc: unlock on error in show_protocols() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 139/153] 8250: use correct value for PORT_BRCM_TRUMANAGE Ben Hutchings
` (16 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Michael S. Tsirkin, Jason Wang, David S. Miller
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Michael S. Tsirkin" <mst@redhat.com>
commit bd97120fc3d1a11f3124c7c9ba1d91f51829eb85 upstream.
If a single descriptor crosses a region, the
second chunk length should be decremented
by size translated so far, instead it includes
the full descriptor length.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/vhost/vhost.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1073,7 +1073,7 @@ static int translate_desc(struct vhost_d
}
_iov = iov + ret;
size = reg->memory_size - addr + reg->guest_phys_addr;
- _iov->iov_len = min((u64)len, size);
+ _iov->iov_len = min((u64)len - s, size);
_iov->iov_base = (void __user *)(unsigned long)
(reg->userspace_addr + addr - reg->guest_phys_addr);
s += size;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 139/153] 8250: use correct value for PORT_BRCM_TRUMANAGE
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (137 preceding siblings ...)
2013-03-04 3:39 ` [ 138/153] vhost: fix length for cross region descriptor Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 140/153] usb: Add quirk detection based on interface information Ben Hutchings
` (15 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <ben@decadent.org.uk>
When backporting commit ebebd49a8eab ('8250/16?50: Add support for
Broadcom TruManage redirected serial port') I took the next
available port type number for PORT_BRCM_TRUMANAGE (22).
However, the 8250 port type numbers are exposed to userland through
the TIOC{G,S}SERIAL ioctls and so must remain stable. Redefine
PORT_BRCM_TRUMANAGE as 25, matching mainline as of commit
85f024401bf807.
This leaves port types 22-24 within the valid range for 8250 but not
implemented there. Change serial8250_verify_port() to specifically
reject these and change serial8250_type() to return "unknown" for them
(though I'm not sure why it would ever see them).
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -2695,7 +2695,7 @@ serial8250_verify_port(struct uart_port
if (ser->irq >= nr_irqs || ser->irq < 0 ||
ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
+ ser->type == PORT_STARTECH || uart_config[ser->type].name == NULL)
return -EINVAL;
return 0;
}
@@ -2705,7 +2705,7 @@ serial8250_type(struct uart_port *port)
{
int type = port->type;
- if (type >= ARRAY_SIZE(uart_config))
+ if (type >= ARRAY_SIZE(uart_config) || uart_config[type].name == NULL)
type = 0;
return uart_config[type].name;
}
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -47,8 +47,8 @@
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_BRCM_TRUMANAGE 22
-#define PORT_MAX_8250 22 /* max port ID */
+#define PORT_BRCM_TRUMANAGE 25
+#define PORT_MAX_8250 25 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 140/153] usb: Add quirk detection based on interface information
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (138 preceding siblings ...)
2013-03-04 3:39 ` [ 139/153] 8250: use correct value for PORT_BRCM_TRUMANAGE Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 141/153] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Ben Hutchings
` (14 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Laurent Pinchart, Alan Stern, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
commit 80da2e0df5af700518611b7d1cc4fc9945bcaf95 upstream.
When a whole class of devices (possibly from a specific vendor, or
across multiple vendors) require a quirk, explictly listing all devices
in the class make the quirks table unnecessarily large. Fix this by
allowing matching devices based on interface information.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/core/driver.c | 38 ++++++++++--------
drivers/usb/core/hub.c | 10 +++--
drivers/usb/core/quirks.c | 93 +++++++++++++++++++++++++++++++++++----------
drivers/usb/core/usb.h | 4 ++
4 files changed, 106 insertions(+), 39 deletions(-)
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -541,22 +541,10 @@ int usb_match_device(struct usb_device *
}
/* returns 0 if no match, 1 if match */
-int usb_match_one_id(struct usb_interface *interface,
- const struct usb_device_id *id)
+int usb_match_one_id_intf(struct usb_device *dev,
+ struct usb_host_interface *intf,
+ const struct usb_device_id *id)
{
- struct usb_host_interface *intf;
- struct usb_device *dev;
-
- /* proc_connectinfo in devio.c may call us with id == NULL. */
- if (id == NULL)
- return 0;
-
- intf = interface->cur_altsetting;
- dev = interface_to_usbdev(interface);
-
- if (!usb_match_device(dev, id))
- return 0;
-
/* The interface class, subclass, and protocol should never be
* checked for a match if the device class is Vendor Specific,
* unless the match record specifies the Vendor ID. */
@@ -581,6 +569,26 @@ int usb_match_one_id(struct usb_interfac
return 1;
}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *intf;
+ struct usb_device *dev;
+
+ /* proc_connectinfo in devio.c may call us with id == NULL. */
+ if (id == NULL)
+ return 0;
+
+ intf = interface->cur_altsetting;
+ dev = interface_to_usbdev(interface);
+
+ if (!usb_match_device(dev, id))
+ return 0;
+
+ return usb_match_one_id_intf(dev, intf, id);
+}
EXPORT_SYMBOL_GPL(usb_match_one_id);
/**
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1883,7 +1883,7 @@ static int usb_enumerate_device(struct u
if (err < 0) {
dev_err(&udev->dev, "can't read configurations, error %d\n",
err);
- goto fail;
+ return err;
}
}
if (udev->wusb == 1 && udev->authorized == 0) {
@@ -1899,8 +1899,12 @@ static int usb_enumerate_device(struct u
udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
}
err = usb_enumerate_device_otg(udev);
-fail:
- return err;
+ if (err < 0)
+ return err;
+
+ usb_detect_interface_quirks(udev);
+
+ return 0;
}
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -15,17 +15,22 @@
#include <linux/usb/quirks.h>
#include "usb.h"
-/* List of quirky USB devices. Please keep this list ordered by:
+/* Lists of quirky USB devices, split in device quirks and interface quirks.
+ * Device quirks are applied at the very beginning of the enumeration process,
+ * right after reading the device descriptor. They can thus only match on device
+ * information.
+ *
+ * Interface quirks are applied after reading all the configuration descriptors.
+ * They can match on both device and interface information.
+ *
+ * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
+ * interface quirks, as they only influence the enumeration process which is run
+ * before processing the interface quirks.
+ *
+ * Please keep the lists ordered by:
* 1) Vendor ID
* 2) Product ID
* 3) Class ID
- *
- * as we want specific devices to be overridden first, and only after that, any
- * class specific quirks.
- *
- * Right now the logic aborts if it finds a valid device in the table, we might
- * want to change that in the future if it turns out that a whole class of
- * devices is broken...
*/
static const struct usb_device_id usb_quirk_list[] = {
/* CBM - Flash disk */
@@ -163,16 +168,53 @@ static const struct usb_device_id usb_qu
{ } /* terminating entry must be last */
};
-static const struct usb_device_id *find_id(struct usb_device *udev)
+static const struct usb_device_id usb_interface_quirk_list[] = {
+ { } /* terminating entry must be last */
+};
+
+static bool usb_match_any_interface(struct usb_device *udev,
+ const struct usb_device_id *id)
+{
+ unsigned int i;
+
+ for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
+ struct usb_host_config *cfg = &udev->config[i];
+ unsigned int j;
+
+ for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
+ struct usb_interface_cache *cache;
+ struct usb_host_interface *intf;
+
+ cache = cfg->intf_cache[j];
+ if (cache->num_altsetting == 0)
+ continue;
+
+ intf = &cache->altsetting[0];
+ if (usb_match_one_id_intf(udev, intf, id))
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static u32 __usb_detect_quirks(struct usb_device *udev,
+ const struct usb_device_id *id)
{
- const struct usb_device_id *id = usb_quirk_list;
+ u32 quirks = 0;
- for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass ||
- id->driver_info; id++) {
- if (usb_match_device(udev, id))
- return id;
+ for (; id->match_flags; id++) {
+ if (!usb_match_device(udev, id))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
+ !usb_match_any_interface(udev, id))
+ continue;
+
+ quirks |= (u32)(id->driver_info);
}
- return NULL;
+
+ return quirks;
}
/*
@@ -180,14 +222,10 @@ static const struct usb_device_id *find_
*/
void usb_detect_quirks(struct usb_device *udev)
{
- const struct usb_device_id *id = usb_quirk_list;
-
- id = find_id(udev);
- if (id)
- udev->quirks = (u32)(id->driver_info);
+ udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
- udev->quirks);
+ udev->quirks);
/* For the present, all devices default to USB-PERSIST enabled */
#if 0 /* was: #ifdef CONFIG_PM */
@@ -204,3 +242,16 @@ void usb_detect_quirks(struct usb_device
udev->persist_enabled = 1;
#endif /* CONFIG_PM */
}
+
+void usb_detect_interface_quirks(struct usb_device *udev)
+{
+ u32 quirks;
+
+ quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
+ if (quirks == 0)
+ return;
+
+ dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
+ quirks);
+ udev->quirks |= quirks;
+}
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -24,6 +24,7 @@ extern void usb_disable_device(struct us
extern int usb_deauthorize_device(struct usb_device *);
extern int usb_authorize_device(struct usb_device *);
extern void usb_detect_quirks(struct usb_device *udev);
+extern void usb_detect_interface_quirks(struct usb_device *udev);
extern int usb_remove_device(struct usb_device *udev);
extern int usb_get_device_descriptor(struct usb_device *dev,
@@ -35,6 +36,9 @@ extern int usb_set_configuration(struct
extern int usb_choose_configuration(struct usb_device *udev);
extern void usb_kick_khubd(struct usb_device *dev);
+extern int usb_match_one_id_intf(struct usb_device *dev,
+ struct usb_host_interface *intf,
+ const struct usb_device_id *id);
extern int usb_match_device(struct usb_device *dev,
const struct usb_device_id *id);
extern void usb_forced_unbind_intf(struct usb_interface *intf);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 141/153] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (139 preceding siblings ...)
2013-03-04 3:39 ` [ 140/153] usb: Add quirk detection based on interface information Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 142/153] speakup: lower default software speech rate Ben Hutchings
` (13 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Laurent Pinchart, Alan Stern, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
commit e387ef5c47ddeaeaa3cbdc54424cdb7a28dae2c0 upstream.
Most Logitech UVC webcams (both early models that don't advertise UVC
compatibility and newer UVC-advertised devices) require the RESET_RESUME
quirk. Instead of listing each and every model, match the devices based
on the UVC interface information.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Adjust context to apply after 3.2.38]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/core/quirks.c | 58 +++++++++++++--------------------------------
1 file changed, 16 insertions(+), 42 deletions(-)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -46,53 +46,23 @@ static const struct usb_device_id usb_qu
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C200 */
- { USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Fusion */
+ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C250 */
- { USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Orbit MP */
+ { USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C300 */
- { USB_DEVICE(0x046d, 0x0805), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Pro for Notebook */
+ { USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam B/C500 */
- { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Pro 5000 */
+ { USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C600 */
- { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam OEM Dell Notebook */
+ { USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam Pro 9000 */
- { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C905 */
- { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C210 */
- { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C260 */
- { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C310 */
- { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C910 */
- { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C160 */
- { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C270 */
- { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Quickcam Pro 9000 */
- { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Quickcam E3500 */
- { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Quickcam Vision Pro */
- { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam OEM Cisco VT Camera II */
+ { USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
@@ -169,6 +139,10 @@ static const struct usb_device_id usb_qu
};
static const struct usb_device_id usb_interface_quirk_list[] = {
+ /* Logitech UVC Cameras */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
+ .driver_info = USB_QUIRK_RESET_RESUME },
+
{ } /* terminating entry must be last */
};
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 142/153] speakup: lower default software speech rate
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (140 preceding siblings ...)
2013-03-04 3:39 ` [ 141/153] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 143/153] asus-laptop: Do not call HWRS on init Ben Hutchings
` (12 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Samuel Thibault, Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Samuel Thibault <samuel.thibault@ens-lyon.org>
commit cfd757010691eae4e17acc246f74e7622c3a2f05 upstream.
Speech synthesis beginners need a low speech rate, and trained people
want a high speech rate. A medium speech rate is thus actually not a
good default for neither. Since trained people will typically know how
to change the rate, better default for a low speech rate, which
beginners can grasp and learn how to increase it afterwards
This was agreed with users on the speakup mailing list.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/staging/speakup/speakup_soft.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c
index 42cdafe..2a67610 100644
--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -46,7 +46,7 @@ static int misc_registered;
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\x01+3p" } },
{ CAPS_STOP, .u.s = {"\x01-3p" } },
- { RATE, .u.n = {"\x01%ds", 5, 0, 9, 0, 0, NULL } },
+ { RATE, .u.n = {"\x01%ds", 2, 0, 9, 0, 0, NULL } },
{ PITCH, .u.n = {"\x01%dp", 5, 0, 9, 0, 0, NULL } },
{ VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
{ TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
^ permalink raw reply related [flat|nested] 172+ messages in thread* [ 143/153] asus-laptop: Do not call HWRS on init
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (141 preceding siblings ...)
2013-03-04 3:39 ` [ 142/153] speakup: lower default software speech rate Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 144/153] usermodehelper: introduce umh_complete(sub_info) Ben Hutchings
` (11 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, ryan, Corentin Chary, Matthew Garrett
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <ben@decadent.org.uk>
commit cb7da022450cdaaebd33078b6b32fb7dd2aaf6db upstream.
Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module
initialisation is very slow on the Asus UL30A. The HWRS method takes
about 12 seconds to run, and subsequent initialisation also seems to
be delayed. Since we don't really need the result, don't bother
calling it on init. Those who are curious can still get the result
through the 'infos' device attribute.
Update the comment about HWRS in show_infos().
Reported-by: ryan <draziw+deb@gmail.com>
References: http://bugs.debian.org/692436
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
---
drivers/platform/x86/asus-laptop.c | 17 ++++-------------
1 file changed, 4 insertions(+), 13 deletions(-)
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -820,8 +820,10 @@ static ssize_t show_infos(struct device
/*
* The HWRS method return informations about the hardware.
* 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * 0x40 for WWAN, 0x10 for WIMAX.
* The significance of others is yet to be found.
- * If we don't find the method, we assume the device are present.
+ * We don't currently use this for device detection, and it
+ * takes several seconds to run on some systems.
*/
rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
@@ -1591,7 +1593,7 @@ static int asus_laptop_get_info(struct a
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
- unsigned long long bsts_result, hwrs_result;
+ unsigned long long bsts_result;
char *string = NULL;
acpi_status status;
@@ -1653,17 +1655,6 @@ static int asus_laptop_get_info(struct a
if (*string)
pr_notice(" %s model detected\n", string);
- /*
- * The HWRS method return informations about the hardware.
- * 0x80 bit is for WLAN, 0x100 for Bluetooth,
- * 0x40 for WWAN, 0x10 for WIMAX.
- * The significance of others is yet to be found.
- */
- status =
- acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
- if (!ACPI_FAILURE(status))
- pr_notice(" HWRS returned %x", (int)hwrs_result);
-
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 144/153] usermodehelper: introduce umh_complete(sub_info)
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (142 preceding siblings ...)
2013-03-04 3:39 ` [ 143/153] asus-laptop: Do not call HWRS on init Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 145/153] usermodehelper: implement UMH_KILLABLE Ben Hutchings
` (10 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Oleg Nesterov, Tetsuo Handa, Rusty Russell, Tejun Heo,
David Rientjes, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit b3449922502f5a161ee2b5022a33aec8472fbf18 upstream.
Preparation. Add the new trivial helper, umh_complete(). Currently it
simply does complete(sub_info->complete).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/kmod.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -197,6 +197,11 @@ void call_usermodehelper_freeinfo(struct
}
EXPORT_SYMBOL(call_usermodehelper_freeinfo);
+static void umh_complete(struct subprocess_info *sub_info)
+{
+ complete(sub_info->complete);
+}
+
/* Keventd can't block, but this (a child) can. */
static int wait_for_helper(void *data)
{
@@ -233,7 +238,7 @@ static int wait_for_helper(void *data)
sub_info->retval = ret;
}
- complete(sub_info->complete);
+ umh_complete(sub_info);
return 0;
}
@@ -267,7 +272,7 @@ static void __call_usermodehelper(struct
case UMH_WAIT_EXEC:
if (pid < 0)
sub_info->retval = pid;
- complete(sub_info->complete);
+ umh_complete(sub_info);
}
}
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 145/153] usermodehelper: implement UMH_KILLABLE
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (143 preceding siblings ...)
2013-03-04 3:39 ` [ 144/153] usermodehelper: introduce umh_complete(sub_info) Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 146/153] usermodehelper: ____call_usermodehelper() doesnt need do_exit() Ben Hutchings
` (9 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Oleg Nesterov, Tetsuo Handa, Rusty Russell, Tejun Heo,
David Rientjes, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit d0bd587a80960d7ba7e0c8396e154028c9045c54 upstream.
Implement UMH_KILLABLE, should be used along with UMH_WAIT_EXEC/PROC.
The caller must ensure that subprocess_info->path/etc can not go away
until call_usermodehelper_freeinfo().
call_usermodehelper_exec(UMH_KILLABLE) does
wait_for_completion_killable. If it fails, it uses
xchg(&sub_info->complete, NULL) to serialize with umh_complete() which
does the same xhcg() to access sub_info->complete.
If call_usermodehelper_exec wins, it can safely return. umh_complete()
should get NULL and call call_usermodehelper_freeinfo().
Otherwise we know that umh_complete() was already called, in this case
call_usermodehelper_exec() falls back to wait_for_completion() which
should succeed "very soon".
Note: UMH_NO_WAIT == -1 but it obviously should not be used with
UMH_KILLABLE. We delay the neccessary cleanup to simplify the back
porting.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/linux/kmod.h | 2 ++
kernel/kmod.c | 27 +++++++++++++++++++++++++--
2 files changed, 27 insertions(+), 2 deletions(-)
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -54,6 +54,8 @@ enum umh_wait {
UMH_WAIT_PROC = 1, /* wait for the process to complete */
};
+#define UMH_KILLABLE 4 /* wait for EXEC/PROC killable */
+
struct subprocess_info {
struct work_struct work;
struct completion *complete;
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -199,7 +199,15 @@ EXPORT_SYMBOL(call_usermodehelper_freein
static void umh_complete(struct subprocess_info *sub_info)
{
- complete(sub_info->complete);
+ struct completion *comp = xchg(&sub_info->complete, NULL);
+ /*
+ * See call_usermodehelper_exec(). If xchg() returns NULL
+ * we own sub_info, the UMH_KILLABLE caller has gone away.
+ */
+ if (comp)
+ complete(comp);
+ else
+ call_usermodehelper_freeinfo(sub_info);
}
/* Keventd can't block, but this (a child) can. */
@@ -250,6 +258,9 @@ static void __call_usermodehelper(struct
enum umh_wait wait = sub_info->wait;
pid_t pid;
+ if (wait != UMH_NO_WAIT)
+ wait &= ~UMH_KILLABLE;
+
/* CLONE_VFORK: wait until the usermode helper has execve'd
* successfully We need the data structures to stay around
* until that is done. */
@@ -440,9 +451,21 @@ int call_usermodehelper_exec(struct subp
queue_work(khelper_wq, &sub_info->work);
if (wait == UMH_NO_WAIT) /* task has freed sub_info */
goto unlock;
+
+ if (wait & UMH_KILLABLE) {
+ retval = wait_for_completion_killable(&done);
+ if (!retval)
+ goto wait_done;
+
+ /* umh_complete() will see NULL and free sub_info */
+ if (xchg(&sub_info->complete, NULL))
+ goto unlock;
+ /* fallthrough, umh_complete() was already called */
+ }
+
wait_for_completion(&done);
+wait_done:
retval = sub_info->retval;
-
out:
call_usermodehelper_freeinfo(sub_info);
unlock:
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 146/153] usermodehelper: ____call_usermodehelper() doesnt need do_exit()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (144 preceding siblings ...)
2013-03-04 3:39 ` [ 145/153] usermodehelper: implement UMH_KILLABLE Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 147/153] kmod: introduce call_modprobe() helper Ben Hutchings
` (8 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Oleg Nesterov, Tetsuo Handa, Rusty Russell, Tejun Heo,
David Rientjes, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit 5b9bd473e3b8a8c6c4ae99be475e6e9b27568555 upstream.
Minor cleanup. ____call_usermodehelper() can simply return, no need to
call do_exit() explicitely.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/kmod.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -186,7 +186,7 @@ static int ____call_usermodehelper(void
/* Exec failed? */
fail:
sub_info->retval = retval;
- do_exit(0);
+ return 0;
}
void call_usermodehelper_freeinfo(struct subprocess_info *info)
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 147/153] kmod: introduce call_modprobe() helper
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (145 preceding siblings ...)
2013-03-04 3:39 ` [ 146/153] usermodehelper: ____call_usermodehelper() doesnt need do_exit() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 148/153] kmod: make __request_module() killable Ben Hutchings
` (7 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Oleg Nesterov, Tetsuo Handa, Rusty Russell, Tejun Heo,
David Rientjes, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit 3e63a93b987685f02421e18b2aa452d20553a88b upstream.
No functional changes. Move the call_usermodehelper code from
__request_module() into the new simple helper, call_modprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/kmod.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -58,6 +58,21 @@ static DEFINE_SPINLOCK(umh_sysctl_lock);
*/
char modprobe_path[KMOD_PATH_LEN] = "/sbin/modprobe";
+static int call_modprobe(char *module_name, int wait)
+{
+ static char *envp[] = {
+ "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL
+ };
+
+ char *argv[] = { modprobe_path, "-q", "--", module_name, NULL };
+
+ return call_usermodehelper_fns(modprobe_path, argv, envp,
+ wait, NULL, NULL, NULL);
+}
+
/**
* __request_module - try to load a kernel module
* @wait: wait (or not) for the operation to complete
@@ -79,11 +94,6 @@ int __request_module(bool wait, const ch
char module_name[MODULE_NAME_LEN];
unsigned int max_modprobes;
int ret;
- char *argv[] = { modprobe_path, "-q", "--", module_name, NULL };
- static char *envp[] = { "HOME=/",
- "TERM=linux",
- "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
- NULL };
static atomic_t kmod_concurrent = ATOMIC_INIT(0);
#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
@@ -126,9 +136,7 @@ int __request_module(bool wait, const ch
trace_module_request(module_name, wait, _RET_IP_);
- ret = call_usermodehelper_fns(modprobe_path, argv, envp,
- wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC,
- NULL, NULL, NULL);
+ ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC);
atomic_dec(&kmod_concurrent);
return ret;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 148/153] kmod: make __request_module() killable
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (146 preceding siblings ...)
2013-03-04 3:39 ` [ 147/153] kmod: introduce call_modprobe() helper Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 149/153] exec: use -ELOOP for max recursion depth Ben Hutchings
` (6 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Oleg Nesterov, Tetsuo Handa, Rusty Russell, Tejun Heo,
David Rientjes, Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit 1cc684ab75123efe7ff446eb821d44375ba8fa30 upstream.
As Tetsuo Handa pointed out, request_module() can stress the system
while the oom-killed caller sleeps in TASK_UNINTERRUPTIBLE.
The task T uses "almost all" memory, then it does something which
triggers request_module(). Say, it can simply call sys_socket(). This
in turn needs more memory and leads to OOM. oom-killer correctly
chooses T and kills it, but this can't help because it sleeps in
TASK_UNINTERRUPTIBLE and after that oom-killer becomes "disabled" by the
TIF_MEMDIE task T.
Make __request_module() killable. The only necessary change is that
call_modprobe() should kmalloc argv and module_name, they can't live in
the stack if we use UMH_KILLABLE. This memory is freed via
call_usermodehelper_freeinfo()->cleanup.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
kernel/kmod.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -58,6 +58,12 @@ static DEFINE_SPINLOCK(umh_sysctl_lock);
*/
char modprobe_path[KMOD_PATH_LEN] = "/sbin/modprobe";
+static void free_modprobe_argv(struct subprocess_info *info)
+{
+ kfree(info->argv[3]); /* check call_modprobe() */
+ kfree(info->argv);
+}
+
static int call_modprobe(char *module_name, int wait)
{
static char *envp[] = {
@@ -67,10 +73,26 @@ static int call_modprobe(char *module_na
NULL
};
- char *argv[] = { modprobe_path, "-q", "--", module_name, NULL };
+ char **argv = kmalloc(sizeof(char *[5]), GFP_KERNEL);
+ if (!argv)
+ goto out;
+
+ module_name = kstrdup(module_name, GFP_KERNEL);
+ if (!module_name)
+ goto free_argv;
+
+ argv[0] = modprobe_path;
+ argv[1] = "-q";
+ argv[2] = "--";
+ argv[3] = module_name; /* check free_modprobe_argv() */
+ argv[4] = NULL;
return call_usermodehelper_fns(modprobe_path, argv, envp,
- wait, NULL, NULL, NULL);
+ wait | UMH_KILLABLE, NULL, free_modprobe_argv, NULL);
+free_argv:
+ kfree(argv);
+out:
+ return -ENOMEM;
}
/**
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 149/153] exec: use -ELOOP for max recursion depth
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (147 preceding siblings ...)
2013-03-04 3:39 ` [ 148/153] kmod: make __request_module() killable Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 150/153] fs: cachefiles: add support for large files in filesystem caching Ben Hutchings
` (5 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Kees Cook, halfdog, P J P, Alexander Viro
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <keescook@chromium.org>
commit d740269867021faf4ce38a449353d2b986c34a67 upstream.
To avoid an explosion of request_module calls on a chain of abusive
scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon
as maximum recursion depth is hit, the error will fail all the way back
up the chain, aborting immediately.
This also has the side-effect of stopping the user's shell from attempting
to reexecute the top-level file as a shell script. As seen in the
dash source:
if (cmd != path_bshell && errno == ENOEXEC) {
*argv-- = cmd;
*argv = cmd = path_bshell;
goto repeat;
}
The above logic was designed for running scripts automatically that lacked
the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC,
things continue to behave as the shell expects.
Additionally, when tracking recursion, the binfmt handlers should not be
involved. The recursion being tracked is the depth of calls through
search_binary_handler(), so that function should be exclusively responsible
for tracking the depth.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/binfmt_em86.c | 1 -
fs/binfmt_misc.c | 6 ------
fs/binfmt_script.c | 4 +---
fs/exec.c | 10 +++++-----
include/linux/binfmts.h | 2 --
5 files changed, 6 insertions(+), 17 deletions(-)
--- a/fs/binfmt_em86.c
+++ b/fs/binfmt_em86.c
@@ -42,7 +42,6 @@ static int load_em86(struct linux_binprm
return -ENOEXEC;
}
- bprm->recursion_depth++; /* Well, the bang-shell is implicit... */
allow_write_access(bprm->file);
fput(bprm->file);
bprm->file = NULL;
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -116,10 +116,6 @@ static int load_misc_binary(struct linux
if (!enabled)
goto _ret;
- retval = -ENOEXEC;
- if (bprm->recursion_depth > BINPRM_MAX_RECURSION)
- goto _ret;
-
/* to keep locking time low, we copy the interpreter string */
read_lock(&entries_lock);
fmt = check_file(bprm);
@@ -199,8 +195,6 @@ static int load_misc_binary(struct linux
if (retval < 0)
goto _error;
- bprm->recursion_depth++;
-
retval = search_binary_handler (bprm, regs);
if (retval < 0)
goto _error;
--- a/fs/binfmt_script.c
+++ b/fs/binfmt_script.c
@@ -22,15 +22,13 @@ static int load_script(struct linux_binp
char interp[BINPRM_BUF_SIZE];
int retval;
- if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!') ||
- (bprm->recursion_depth > BINPRM_MAX_RECURSION))
+ if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!'))
return -ENOEXEC;
/*
* This section does the #! interpretation.
* Sorta complicated, but hopefully it will work. -TYT
*/
- bprm->recursion_depth++;
allow_write_access(bprm->file);
fput(bprm->file);
bprm->file = NULL;
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1385,6 +1385,10 @@ int search_binary_handler(struct linux_b
struct linux_binfmt *fmt;
pid_t old_pid;
+ /* This allows 4 levels of binfmt rewrites before failing hard. */
+ if (depth > 5)
+ return -ELOOP;
+
retval = security_bprm_check(bprm);
if (retval)
return retval;
@@ -1408,12 +1412,8 @@ int search_binary_handler(struct linux_b
if (!try_module_get(fmt->module))
continue;
read_unlock(&binfmt_lock);
+ bprm->recursion_depth = depth + 1;
retval = fn(bprm, regs);
- /*
- * Restore the depth counter to its starting value
- * in this call, so we don't have to rely on every
- * load_binary function to restore it on return.
- */
bprm->recursion_depth = depth;
if (retval >= 0) {
if (depth == 0)
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -67,8 +67,6 @@ struct linux_binprm {
#define BINPRM_FLAGS_EXECFD_BIT 1
#define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT)
-#define BINPRM_MAX_RECURSION 4
-
/* Function parameter for binfmt->coredump */
struct coredump_params {
long signr;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 150/153] fs: cachefiles: add support for large files in filesystem caching
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (148 preceding siblings ...)
2013-03-04 3:39 ` [ 149/153] exec: use -ELOOP for max recursion depth Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 151/153] ext4: rewrite punch hole to use ext4_ext_remove_space() Ben Hutchings
` (4 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Justin Lecher, Suresh Jayaraman, David Howells,
Linus Torvalds
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Justin Lecher <jlec@gentoo.org>
commit 98c350cda2c14a343d34ea01a3d9c24fea5ec66d upstream.
Support the caching of large files.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=31182
Signed-off-by: Justin Lecher <jlec@gentoo.org>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Tested-by: Suresh Jayaraman <sjayaraman@suse.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2:
- Adjust context
- dentry_open() takes dentry and vfsmount pointers, not a path pointer]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -918,7 +918,7 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page)
* own time */
dget(object->backer);
mntget(cache->mnt);
- file = dentry_open(object->backer, cache->mnt, O_RDWR,
+ file = dentry_open(object->backer, cache->mnt, O_RDWR | O_LARGEFILE,
cache->cache_cred);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 151/153] ext4: rewrite punch hole to use ext4_ext_remove_space()
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (149 preceding siblings ...)
2013-03-04 3:39 ` [ 150/153] fs: cachefiles: add support for large files in filesystem caching Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 152/153] ext4: fix hole punch failure when depth is greater than 0 Ben Hutchings
` (3 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: akpm, Lukas Czerner, Theodore Tso
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Czerner <lczerner@redhat.com>
commit 5f95d21fb6f2aaa52830e5b7fb405f6c71d3ab85 upstream.
This commit rewrites ext4 punch hole implementation to use
ext4_ext_remove_space() instead of its home gown way of doing this via
ext4_ext_map_blocks(). There are several reasons for changing this.
Firstly it is quite non obvious that punching hole needs to
ext4_ext_map_blocks() to punch a hole, especially given that this
function should map blocks, not unmap it. It also required a lot of new
code in ext4_ext_map_blocks().
Secondly the design of it is not very effective. The reason is that we
are trying to punch out blocks in ext4_ext_punch_hole() in opposite
direction than in ext4_ext_rm_leaf() which causes the ext4_ext_rm_leaf()
to iterate through the whole tree from the end to the start to find the
requested extent for every extent we are going to punch out.
And finally the current implementation does not use the existing code,
but bring a lot of new code, which is IMO unnecessary since there
already is some infrastructure we can use. Specifically
ext4_ext_remove_space().
This commit changes ext4_ext_remove_space() to accept 'end' parameter so
we can not only truncate to the end of file, but also remove the space
in the middle of the file (punch a hole). Moreover, because the last
block to punch out, might be in the middle of the extent, we have to
split the extent at 'end + 1' so ext4_ext_rm_leaf() can easily either
remove the whole fist part of split extent, or change its size.
ext4_ext_remove_space() is then used to actually remove the space
(extents) from within the hole, instead of ext4_ext_map_blocks().
Note that this also fix the issue with punch hole, where we would forget
to remove empty index blocks from the extent tree, resulting in double
free block error and file system corruption. This is simply because we
now use different code path, where this problem does not exist.
This has been tested with fsx running for several days and xfstests,
plus xfstest #251 with '-o discard' run on the loop image (which
converts discard requestes into punch hole to the backing file). All of
it on 1K and 4K file system block size.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
[bwh: Backported to 3.2.y: move EXT4_EXT_DATA_VALID{1,2} along with the
other extent splitting flags]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/extents.c | 170 ++++++++++++++++++++++++++++--------------------------
1 file changed, 88 insertions(+), 82 deletions(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -45,6 +45,17 @@
#include <trace/events/ext4.h>
+/*
+ * used by extent splitting.
+ */
+#define EXT4_EXT_MAY_ZEROOUT 0x1 /* safe to zeroout if split fails \
+ due to ENOSPC */
+#define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */
+#define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */
+
+#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
+#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
+
static int ext4_split_extent(handle_t *handle,
struct inode *inode,
struct ext4_ext_path *path,
@@ -52,6 +63,13 @@ static int ext4_split_extent(handle_t *h
int split_flag,
int flags);
+static int ext4_split_extent_at(handle_t *handle,
+ struct inode *inode,
+ struct ext4_ext_path *path,
+ ext4_lblk_t split,
+ int split_flag,
+ int flags);
+
static int ext4_ext_truncate_extend_restart(handle_t *handle,
struct inode *inode,
int needed)
@@ -2324,7 +2342,7 @@ ext4_ext_rm_leaf(handle_t *handle, struc
struct ext4_extent *ex;
/* the header must be checked already in ext4_ext_remove_space() */
- ext_debug("truncate since %u in leaf\n", start);
+ ext_debug("truncate since %u in leaf to %u\n", start, end);
if (!path[depth].p_hdr)
path[depth].p_hdr = ext_block_hdr(path[depth].p_bh);
eh = path[depth].p_hdr;
@@ -2359,7 +2377,7 @@ ext4_ext_rm_leaf(handle_t *handle, struc
ext_debug(" border %u:%u\n", a, b);
/* If this extent is beyond the end of the hole, skip it */
- if (end <= ex_ee_block) {
+ if (end < ex_ee_block) {
ex--;
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
@@ -2498,7 +2516,8 @@ ext4_ext_more_to_rm(struct ext4_ext_path
return 1;
}
-static int ext4_ext_remove_space(struct inode *inode, ext4_lblk_t start)
+static int ext4_ext_remove_space(struct inode *inode, ext4_lblk_t start,
+ ext4_lblk_t end)
{
struct super_block *sb = inode->i_sb;
int depth = ext_depth(inode);
@@ -2507,7 +2526,7 @@ static int ext4_ext_remove_space(struct
handle_t *handle;
int i, err;
- ext_debug("truncate since %u\n", start);
+ ext_debug("truncate since %u to %u\n", start, end);
/* probably first extent we're gonna free will be last in block */
handle = ext4_journal_start(inode, depth + 1);
@@ -2520,6 +2539,61 @@ again:
trace_ext4_ext_remove_space(inode, start, depth);
/*
+ * Check if we are removing extents inside the extent tree. If that
+ * is the case, we are going to punch a hole inside the extent tree
+ * so we have to check whether we need to split the extent covering
+ * the last block to remove so we can easily remove the part of it
+ * in ext4_ext_rm_leaf().
+ */
+ if (end < EXT_MAX_BLOCKS - 1) {
+ struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+
+ /* find extent for this block */
+ path = ext4_ext_find_extent(inode, end, NULL);
+ if (IS_ERR(path)) {
+ ext4_journal_stop(handle);
+ return PTR_ERR(path);
+ }
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ if (!ex)
+ goto cont;
+
+ ee_block = le32_to_cpu(ex->ee_block);
+
+ /*
+ * See if the last block is inside the extent, if so split
+ * the extent at 'end' block so we can easily remove the
+ * tail of the first part of the split extent in
+ * ext4_ext_rm_leaf().
+ */
+ if (end >= ee_block &&
+ end < ee_block + ext4_ext_get_actual_len(ex) - 1) {
+ int split_flag = 0;
+
+ if (ext4_ext_is_uninitialized(ex))
+ split_flag = EXT4_EXT_MARK_UNINIT1 |
+ EXT4_EXT_MARK_UNINIT2;
+
+ /*
+ * Split the extent in two so that 'end' is the last
+ * block in the first new extent
+ */
+ err = ext4_split_extent_at(handle, inode, path,
+ end + 1, split_flag,
+ EXT4_GET_BLOCKS_PRE_IO |
+ EXT4_GET_BLOCKS_PUNCH_OUT_EXT);
+
+ if (err < 0)
+ goto out;
+ }
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
+cont:
+
+ /*
* We start scanning from right side, freeing all the blocks
* after i_size and walking into the tree depth-wise.
*/
@@ -2531,6 +2605,7 @@ again:
}
path[0].p_depth = depth;
path[0].p_hdr = ext_inode_hdr(inode);
+
if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
err = -EIO;
goto out;
@@ -2542,7 +2617,7 @@ again:
/* this is leaf block */
err = ext4_ext_rm_leaf(handle, inode, path,
&partial_cluster, start,
- EXT_MAX_BLOCKS - 1);
+ end);
/* root level has p_bh == NULL, brelse() eats this */
brelse(path[i].p_bh);
path[i].p_bh = NULL;
@@ -2725,17 +2800,6 @@ static int ext4_ext_zeroout(struct inode
}
/*
- * used by extent splitting.
- */
-#define EXT4_EXT_MAY_ZEROOUT 0x1 /* safe to zeroout if split fails \
- due to ENOSPC */
-#define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */
-#define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */
-
-#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
-#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
-
-/*
* ext4_split_extent_at() splits an extent at given block.
*
* @handle: the journal handle
@@ -4277,7 +4341,7 @@ void ext4_ext_truncate(struct inode *ino
last_block = (inode->i_size + sb->s_blocksize - 1)
>> EXT4_BLOCK_SIZE_BITS(sb);
- err = ext4_ext_remove_space(inode, last_block);
+ err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCKS - 1);
/* In a multi-transaction truncate, we only make the final
* transaction synchronous.
@@ -4754,14 +4818,12 @@ int ext4_ext_punch_hole(struct file *fil
{
struct inode *inode = file->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
- struct ext4_ext_cache cache_ex;
- ext4_lblk_t first_block, last_block, num_blocks, iblock, max_blocks;
+ ext4_lblk_t first_block, stop_block;
struct address_space *mapping = inode->i_mapping;
- struct ext4_map_blocks map;
handle_t *handle;
loff_t first_page, last_page, page_len;
loff_t first_page_offset, last_page_offset;
- int ret, credits, blocks_released, err = 0;
+ int credits, err = 0;
/* No need to punch hole beyond i_size */
if (offset >= inode->i_size)
@@ -4777,10 +4839,6 @@ int ext4_ext_punch_hole(struct file *fil
offset;
}
- first_block = (offset + sb->s_blocksize - 1) >>
- EXT4_BLOCK_SIZE_BITS(sb);
- last_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
-
first_page = (offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
last_page = (offset + length) >> PAGE_CACHE_SHIFT;
@@ -4859,7 +4917,6 @@ int ext4_ext_punch_hole(struct file *fil
}
}
-
/*
* If i_size is contained in the last page, we need to
* unmap and zero the partial page after i_size
@@ -4879,73 +4936,22 @@ int ext4_ext_punch_hole(struct file *fil
}
}
+ first_block = (offset + sb->s_blocksize - 1) >>
+ EXT4_BLOCK_SIZE_BITS(sb);
+ stop_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
+
/* If there are no blocks to remove, return now */
- if (first_block >= last_block)
+ if (first_block >= stop_block)
goto out;
down_write(&EXT4_I(inode)->i_data_sem);
ext4_ext_invalidate_cache(inode);
ext4_discard_preallocations(inode);
- /*
- * Loop over all the blocks and identify blocks
- * that need to be punched out
- */
- iblock = first_block;
- blocks_released = 0;
- while (iblock < last_block) {
- max_blocks = last_block - iblock;
- num_blocks = 1;
- memset(&map, 0, sizeof(map));
- map.m_lblk = iblock;
- map.m_len = max_blocks;
- ret = ext4_ext_map_blocks(handle, inode, &map,
- EXT4_GET_BLOCKS_PUNCH_OUT_EXT);
-
- if (ret > 0) {
- blocks_released += ret;
- num_blocks = ret;
- } else if (ret == 0) {
- /*
- * If map blocks could not find the block,
- * then it is in a hole. If the hole was
- * not already cached, then map blocks should
- * put it in the cache. So we can get the hole
- * out of the cache
- */
- memset(&cache_ex, 0, sizeof(cache_ex));
- if ((ext4_ext_check_cache(inode, iblock, &cache_ex)) &&
- !cache_ex.ec_start) {
-
- /* The hole is cached */
- num_blocks = cache_ex.ec_block +
- cache_ex.ec_len - iblock;
-
- } else {
- /* The block could not be identified */
- err = -EIO;
- break;
- }
- } else {
- /* Map blocks error */
- err = ret;
- break;
- }
+ err = ext4_ext_remove_space(inode, first_block, stop_block - 1);
- if (num_blocks == 0) {
- /* This condition should never happen */
- ext_debug("Block lookup failed");
- err = -EIO;
- break;
- }
-
- iblock += num_blocks;
- }
-
- if (blocks_released > 0) {
- ext4_ext_invalidate_cache(inode);
- ext4_discard_preallocations(inode);
- }
+ ext4_ext_invalidate_cache(inode);
+ ext4_discard_preallocations(inode);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 152/153] ext4: fix hole punch failure when depth is greater than 0
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (150 preceding siblings ...)
2013-03-04 3:39 ` [ 151/153] ext4: rewrite punch hole to use ext4_ext_remove_space() Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 3:39 ` [ 153/153] ext4: fix kernel BUG on large-scale rm -rf commands Ben Hutchings
` (2 subsequent siblings)
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Ashish Sangwan, Ashish Sangwan, Namjae Jeon, Lukas Czerner,
Greg Kroah-Hartman
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ashish Sangwan <ashishsangwan2@gmail.com>
commit 968dee77220768a5f52cf8b21d0bdb73486febef upstream.
Whether to continue removing extents or not is decided by the return
value of function ext4_ext_more_to_rm() which checks 2 conditions:
a) if there are no more indexes to process.
b) if the number of entries are decreased in the header of "depth -1".
In case of hole punch, if the last block to be removed is not part of
the last extent index than this index will not be deleted, hence the
number of valid entries in the extent header of "depth - 1" will
remain as it is and ext4_ext_more_to_rm will return 0 although the
required blocks are not yet removed.
This patch fixes the above mentioned problem as instead of removing
the extents from the end of file, it starts removing the blocks from
the particular extent from which removing blocks is actually required
and continue backward until done.
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/extents.c | 46 +++++++++++++++++++++++++++++-----------------
1 file changed, 29 insertions(+), 17 deletions(-)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2521,10 +2521,10 @@ static int ext4_ext_remove_space(struct
{
struct super_block *sb = inode->i_sb;
int depth = ext_depth(inode);
- struct ext4_ext_path *path;
+ struct ext4_ext_path *path = NULL;
ext4_fsblk_t partial_cluster = 0;
handle_t *handle;
- int i, err;
+ int i = 0, err;
ext_debug("truncate since %u to %u\n", start, end);
@@ -2557,8 +2557,12 @@ again:
}
depth = ext_depth(inode);
ex = path[depth].p_ext;
- if (!ex)
+ if (!ex) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ path = NULL;
goto cont;
+ }
ee_block = le32_to_cpu(ex->ee_block);
@@ -2588,8 +2592,6 @@ again:
if (err < 0)
goto out;
}
- ext4_ext_drop_refs(path);
- kfree(path);
}
cont:
@@ -2598,19 +2600,27 @@ cont:
* after i_size and walking into the tree depth-wise.
*/
depth = ext_depth(inode);
- path = kzalloc(sizeof(struct ext4_ext_path) * (depth + 1), GFP_NOFS);
- if (path == NULL) {
- ext4_journal_stop(handle);
- return -ENOMEM;
- }
- path[0].p_depth = depth;
- path[0].p_hdr = ext_inode_hdr(inode);
-
- if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
- err = -EIO;
- goto out;
+ if (path) {
+ int k = i = depth;
+ while (--k > 0)
+ path[k].p_block =
+ le16_to_cpu(path[k].p_hdr->eh_entries)+1;
+ } else {
+ path = kzalloc(sizeof(struct ext4_ext_path) * (depth + 1),
+ GFP_NOFS);
+ if (path == NULL) {
+ ext4_journal_stop(handle);
+ return -ENOMEM;
+ }
+ path[0].p_depth = depth;
+ path[0].p_hdr = ext_inode_hdr(inode);
+
+ if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
+ err = -EIO;
+ goto out;
+ }
}
- i = err = 0;
+ err = 0;
while (i >= 0 && err == 0) {
if (i == depth) {
@@ -2724,8 +2734,10 @@ cont:
out:
ext4_ext_drop_refs(path);
kfree(path);
- if (err == -EAGAIN)
+ if (err == -EAGAIN) {
+ path = NULL;
goto again;
+ }
ext4_journal_stop(handle);
return err;
^ permalink raw reply [flat|nested] 172+ messages in thread* [ 153/153] ext4: fix kernel BUG on large-scale rm -rf commands
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (151 preceding siblings ...)
2013-03-04 3:39 ` [ 152/153] ext4: fix hole punch failure when depth is greater than 0 Ben Hutchings
@ 2013-03-04 3:39 ` Ben Hutchings
2013-03-04 4:29 ` [ 000/153] 3.2.40-stable review Ben Hutchings
2013-03-05 14:07 ` Satoru Takeuchi
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 3:39 UTC (permalink / raw)
To: linux-kernel, stable
Cc: akpm, Theodore Tso, Maciej Żenczykowski,
Marti Raudsepp, Fengguang Wu
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2395 bytes --]
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Theodore Ts'o <tytso@mit.edu>
commit 89a4e48f8479f8145eca9698f39fe188c982212f upstream.
Commit 968dee7722: "ext4: fix hole punch failure when depth is greater
than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel
crashes when users ran run "rm -rf" on large directory hierarchy on
ext4 filesystems on RAID devices:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710)
Call Trace:
[<ffffffff81236483>] ? __ext4_handle_dirty_metadata+0x83/0x110
[<ffffffff812353d3>] ext4_ext_truncate+0x193/0x1d0
[<ffffffff8120a8cf>] ? ext4_mark_inode_dirty+0x7f/0x1f0
[<ffffffff81207e05>] ext4_truncate+0xf5/0x100
[<ffffffff8120cd51>] ext4_evict_inode+0x461/0x490
[<ffffffff811a1312>] evict+0xa2/0x1a0
[<ffffffff811a1513>] iput+0x103/0x1f0
[<ffffffff81196d84>] do_unlinkat+0x154/0x1c0
[<ffffffff8118cc3a>] ? sys_newfstatat+0x2a/0x40
[<ffffffff81197b0b>] sys_unlinkat+0x1b/0x50
[<ffffffff816135e9>] system_call_fastpath+0x16/0x1b
Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00
RIP [<ffffffff81233164>] ext4_ext_remove_space+0xa34/0xdf0
This could be reproduced as follows:
The problem in commit 968dee7722 was that caused the variable 'i' to
be left uninitialized if the truncate required more space than was
available in the journal. This resulted in the function
ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused
ext4_ext_remove_space() to restart the truncate operation after
starting a new jbd2 handle.
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: Marti Raudsepp <marti@juffo.org>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
fs/ext4/extents.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2614,6 +2614,7 @@ cont:
}
path[0].p_depth = depth;
path[0].p_hdr = ext_inode_hdr(inode);
+ i = 0;
if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
err = -EIO;
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 000/153] 3.2.40-stable review
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (152 preceding siblings ...)
2013-03-04 3:39 ` [ 153/153] ext4: fix kernel BUG on large-scale rm -rf commands Ben Hutchings
@ 2013-03-04 4:29 ` Ben Hutchings
2013-03-05 14:07 ` Satoru Takeuchi
154 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-04 4:29 UTC (permalink / raw)
To: linux-kernel; +Cc: stable, torvalds, akpm
[-- Attachment #1.1: Type: text/plain, Size: 173 bytes --]
This is the combined patch for 3.2.40-rc1 relative to 3.2.39.
Ben.
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #1.2: linux-3.2.40-rc1.patch --]
[-- Type: text/x-patch, Size: 212357 bytes --]
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 81c287f..ddbf18e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -552,6 +552,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
UART at the specified I/O port or MMIO address,
switching to the matching ttyS device later. The
options are the same as for ttyS, above.
+ hvc<n> Use the hypervisor console device <n>. This is for
+ both Xen and PowerPC hypervisors.
If the device connected to the port is not a TTY but a braille
device, prepend "brl," before the device type, for instance
@@ -703,6 +705,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
+ earlyprintk=xen
earlyprintk=serial[,ttySn[,baudrate]]
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
@@ -720,6 +723,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
The VGA output is eventually overwritten by the real
console.
+ The xen output can only be used by Xen PV guests.
+
ekgdboc= [X86,KGDB] Allow early kernel console debugging
ekgdboc=kbd
diff --git a/Makefile b/Makefile
index 0fceb8b..1d23339 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
-SUBLEVEL = 39
-EXTRAVERSION =
+SUBLEVEL = 40
+EXTRAVERSION = -rc1
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
index b7de471..b802f28 100644
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -37,6 +37,7 @@
#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+#define CSMSADRCFG (SMEMC_VIRT + 0xA0) /* Chip Select Configuration Register */
/*
* More handy macros for PCMCIA
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index 7992305..f38aa89 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -40,6 +40,8 @@ static void pxa3xx_smemc_resume(void)
__raw_writel(csadrcfg[1], CSADRCFG1);
__raw_writel(csadrcfg[2], CSADRCFG2);
__raw_writel(csadrcfg[3], CSADRCFG3);
+ /* CSMSADRCFG wakes up in its default state (0), so we need to set it */
+ __raw_writel(0x2, CSMSADRCFG);
}
static struct syscore_ops smemc_syscore_ops = {
@@ -49,8 +51,19 @@ static struct syscore_ops smemc_syscore_ops = {
static int __init smemc_init(void)
{
- if (cpu_is_pxa3xx())
+ if (cpu_is_pxa3xx()) {
+ /*
+ * The only documentation we have on the
+ * Chip Select Configuration Register (CSMSADRCFG) is that
+ * it must be programmed to 0x2.
+ * Moreover, in the bit definitions, the second bit
+ * (CSMSADRCFG[1]) is called "SETALWAYS".
+ * Other bits are reserved in this register.
+ */
+ __raw_writel(0x2, CSMSADRCFG);
+
register_syscore_ops(&smemc_syscore_ops);
+ }
return 0;
}
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 4135de8..13ed33c 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -40,17 +40,17 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
1004:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
moveq \rd, \rd, lsr #SHIFT_2440TXF
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
.macro fifo_full_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
@@ -68,18 +68,18 @@
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
- ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+ ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
10000:
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
.macro fifo_level_s3c2410 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2410_UFSTAT_TXMASK
.endm
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
index 473b3cd..ef2287b 100644
--- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -34,10 +34,10 @@
@@ try the interrupt offset register, since it is there
- ldr \irqstat, [ \base, #INTPND ]
+ ldr \irqstat, [\base, #INTPND ]
teq \irqstat, #0
beq 1002f
- ldr \irqnr, [ \base, #INTOFFSET ]
+ ldr \irqnr, [\base, #INTOFFSET ]
mov \tmp, #1
tst \irqstat, \tmp, lsl \irqnr
bne 1001f
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index c93bf2d..6183a68 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -30,4 +30,4 @@
h1940_pm_return:
mov r0, #S3C2410_PA_GPIO
- ldr pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+ ldr pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index dd5b638..65200ae 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
ldr r4, =S3C2410_REFRESH
ldr r5, =S3C24XX_MISCCR
ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
+ ldr r7, [r4] @ get REFRESH (and ensure in TLB)
+ ldr r8, [r5] @ get MISCCR (and ensure in TLB)
+ ldr r9, [r6] @ get CLKCON (and ensure in TLB)
orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
@@ align next bit of code to cache line
.align 5
s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
+ streq r7, [r4] @ SDRAM sleep command
+ streq r8, [r5] @ SDRAM power-down config
+ streq r9, [r6] @ CPU sleep
1: beq 1b
mov pc, r14
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index c82418e..5adaceb 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
* retry, as simply returning causes the system to lock.
*/
- ldrne r9, [ r1 ]
- strne r9, [ r1 ]
- ldrne r9, [ r2 ]
- strne r9, [ r2 ]
- ldrne r9, [ r3 ]
- strne r9, [ r3 ]
+ ldrne r9, [r1]
+ strne r9, [r1]
+ ldrne r9, [r2]
+ strne r9, [r2]
+ ldrne r9, [r3]
+ strne r9, [r3]
bne s3c2412_sleep_enter1
mov pc, r14
diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S
index d39aca5..08436cf 100644
--- a/arch/arm/mach-w90x900/include/mach/entry-macro.S
+++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S
@@ -22,8 +22,8 @@
mov \base, #AIC_BA
- ldr \irqnr, [ \base, #AIC_IPER]
- ldr \irqnr, [ \base, #AIC_ISNR]
+ ldr \irqnr, [\base, #AIC_IPER]
+ ldr \irqnr, [\base, #AIC_ISNR]
cmp \irqnr, #0
.endm
diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
index 207e275..f3a9cff 100644
--- a/arch/arm/plat-samsung/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -14,12 +14,12 @@
/* The S5PV210/S5PC110 implementations are as belows. */
.macro fifo_level_s5pv210 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S5PV210_UFSTAT_TXMASK
.endm
.macro fifo_full_s5pv210 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S5PV210_UFSTAT_TXFULL
.endm
@@ -27,7 +27,7 @@
* most widely re-used */
.macro fifo_level_s3c2440 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
and \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
@@ -36,7 +36,7 @@
#endif
.macro fifo_full_s3c2440 rd, rx
- ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ ldr \rd, [\rx, # S3C2410_UFSTAT]
tst \rd, #S3C2440_UFSTAT_TXFULL
.endm
@@ -45,11 +45,11 @@
#endif
.macro senduart,rd,rx
- strb \rd, [\rx, # S3C2410_UTXH ]
+ strb \rd, [\rx, # S3C2410_UTXH]
.endm
.macro busyuart, rd, rx
- ldr \rd, [ \rx, # S3C2410_UFCON ]
+ ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
@@ -60,7 +60,7 @@
1001:
@ busy waiting for non fifo
- ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
@@ -68,7 +68,7 @@
.endm
.macro waituart,rd,rx
- ldr \rd, [ \rx, # S3C2410_UFCON ]
+ ldr \rd, [\rx, # S3C2410_UFCON]
tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled?
beq 1001f @
@ FIFO enabled...
@@ -79,7 +79,7 @@
b 1002f
1001:
@ idle waiting for non fifo
- ldr \rd, [ \rx, # S3C2410_UTRSTAT ]
+ ldr \rd, [\rx, # S3C2410_UTRSTAT]
tst \rd, #S3C2410_UTRSTAT_TXFE
beq 1001b
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 22dadeb..9d35a3e 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -12,11 +12,10 @@
#include <linux/bitops.h>
#include <linux/spinlock.h>
+#include <linux/mm_types.h>
#include <asm/processor.h>
#include <asm/cache.h>
-struct vm_area_struct;
-
/*
* kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
* memory. For the return value to be meaningful, ADDR must be >=
@@ -40,7 +39,14 @@ struct vm_area_struct;
do{ \
*(pteptr) = (pteval); \
} while(0)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+extern void purge_tlb_entries(struct mm_struct *, unsigned long);
+
+#define set_pte_at(mm, addr, ptep, pteval) \
+ do { \
+ set_pte(ptep, pteval); \
+ purge_tlb_entries(mm, addr); \
+ } while (0)
#endif /* !__ASSEMBLY__ */
@@ -464,6 +470,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
old = pte_val(*ptep);
new = pte_val(pte_wrprotect(__pte (old)));
} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+ purge_tlb_entries(mm, addr);
#else
pte_t old_pte = *ptep;
set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 83335f3..5241698 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -421,6 +421,24 @@ void kunmap_parisc(void *addr)
EXPORT_SYMBOL(kunmap_parisc);
#endif
+void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
+{
+ unsigned long flags;
+
+ /* Note: purge_tlb_entries can be called at startup with
+ no context. */
+
+ /* Disable preemption while we play with %sr1. */
+ preempt_disable();
+ mtsp(mm->context, 1);
+ purge_tlb_start(flags);
+ pdtlb(addr);
+ pitlb(addr);
+ purge_tlb_end(flags);
+ preempt_enable();
+}
+EXPORT_SYMBOL(purge_tlb_entries);
+
void __flush_tlb_range(unsigned long sid, unsigned long start,
unsigned long end)
{
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 66ea9b8..21165a4 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -61,6 +61,7 @@ void __init pci_addr_cache_build(void);
*/
void eeh_add_device_tree_early(struct device_node *);
void eeh_add_device_tree_late(struct pci_bus *);
+void eeh_add_sysfs_files(struct pci_bus *);
/**
* eeh_remove_device_recursive - undo EEH for device & children.
@@ -105,6 +106,8 @@ static inline void eeh_add_device_tree_early(struct device_node *dn) { }
static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
+
static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 26ccbf7..4c0908d 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -162,6 +162,8 @@ static int kexec_all_irq_disabled = 0;
static void kexec_smp_down(void *arg)
{
local_irq_disable();
+ hard_irq_disable();
+
mb(); /* make sure our irqs are disabled before we say they are */
get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
while(kexec_all_irq_disabled == 0)
@@ -244,6 +246,8 @@ static void kexec_prepare_cpus(void)
wake_offline_cpus();
smp_call_function(kexec_smp_down, NULL, /* wait */0);
local_irq_disable();
+ hard_irq_disable();
+
mb(); /* make sure IRQs are disabled before we say they are */
get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
@@ -281,6 +285,7 @@ static void kexec_prepare_cpus(void)
if (ppc_md.kexec_cpu_down)
ppc_md.kexec_cpu_down(0, 0);
local_irq_disable();
+ hard_irq_disable();
}
#endif /* SMP */
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index e1612df..b10beef 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -91,6 +91,9 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev)
/* Add probed PCI devices to the device model */
pci_bus_add_devices(phb->bus);
+ /* sysfs files should only be added after devices are added */
+ eeh_add_sysfs_files(phb->bus);
+
return 0;
}
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 458ed3b..a3cd949 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1536,11 +1536,14 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
pcibios_allocate_bus_resources(bus);
pcibios_claim_one_bus(bus);
+ /* Fixup EEH */
+ eeh_add_device_tree_late(bus);
+
/* Add new devices to global lists. Register in proc, sysfs. */
pci_bus_add_devices(bus);
- /* Fixup EEH */
- eeh_add_device_tree_late(bus);
+ /* sysfs files should only be added after devices are added */
+ eeh_add_sysfs_files(bus);
}
EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 5658690..389e06b 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -1238,7 +1238,6 @@ static void eeh_add_device_late(struct pci_dev *dev)
pdn->pcidev = dev;
pci_addr_cache_insert_device(dev);
- eeh_sysfs_add_device(dev);
}
void eeh_add_device_tree_late(struct pci_bus *bus)
@@ -1257,6 +1256,29 @@ void eeh_add_device_tree_late(struct pci_bus *bus)
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
/**
+ * eeh_add_sysfs_files - Add EEH sysfs files for the indicated PCI bus
+ * @bus: PCI bus
+ *
+ * This routine must be used to add EEH sysfs files for PCI
+ * devices which are attached to the indicated PCI bus. The PCI bus
+ * is added after system boot through hotplug or dlpar.
+ */
+void eeh_add_sysfs_files(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_sysfs_add_device(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_sysfs_files(subbus);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
+
+/**
* eeh_remove_device - undo EEH setup for the indicated pci device
* @dev: pci device to be removed
*
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 8644366..b2f44de 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -121,6 +121,9 @@ static int s390_next_ktime(ktime_t expires,
nsecs = ktime_to_ns(ktime_add(timespec_to_ktime(ts), expires));
do_div(nsecs, 125);
S390_lowcore.clock_comparator = sched_clock_base_cc + (nsecs << 9);
+ /* Program the maximum value if we have an overflow (== year 2042) */
+ if (unlikely(S390_lowcore.clock_comparator < sched_clock_base_cc))
+ S390_lowcore.clock_comparator = -1ULL;
set_clock_comparator(S390_lowcore.clock_comparator);
return 0;
}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index dffcaa4..4db9b1e 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -597,6 +597,14 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
} else
prefix = 0;
+ /*
+ * The guest FPRS and ACRS are in the host FPRS/ACRS due to the lazy
+ * copying in vcpu load/put. Lets update our copies before we save
+ * it into the save area
+ */
+ save_fp_regs(&vcpu->arch.guest_fpregs);
+ save_access_regs(vcpu->arch.guest_acrs);
+
if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs),
vcpu->arch.guest_fpregs.fprs, 128, prefix))
return -EFAULT;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index efb4294..9a42703 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1150,7 +1150,7 @@ config DIRECT_GBPAGES
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && BROKEN)
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
---help---
Enable NUMA (Non Uniform Memory Access) support.
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 884507e..6be9909 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -142,6 +142,11 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
+static inline unsigned long pud_pfn(pud_t pud)
+{
+ return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
static inline int pmd_large(pmd_t pte)
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index f5373df..db4f704 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -20,12 +20,19 @@ static int set_x2apic_phys_mode(char *arg)
}
early_param("x2apic_phys", set_x2apic_phys_mode);
+static bool x2apic_fadt_phys(void)
+{
+ if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+ (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
+ printk(KERN_DEBUG "System requires x2apic physical mode\n");
+ return true;
+ }
+ return false;
+}
+
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- if (x2apic_phys)
- return x2apic_enabled();
- else
- return 0;
+ return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
}
static void
@@ -108,7 +115,7 @@ static void init_x2apic_ldr(void)
static int x2apic_phys_probe(void)
{
- if (x2apic_mode && x2apic_phys)
+ if (x2apic_mode && (x2apic_phys || x2apic_fadt_phys()))
return 1;
return apic == &apic_x2apic_phys;
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 0a630dd..646d192 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -68,7 +68,8 @@ static void __init ms_hyperv_init_platform(void)
printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
- clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
+ if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
+ clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
diff --git a/arch/x86/kernel/head.c b/arch/x86/kernel/head.c
index af0699b..f6c4674 100644
--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -5,8 +5,6 @@
#include <asm/setup.h>
#include <asm/bios_ebda.h>
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
/*
* The BIOS places the EBDA/XBDA at the top of conventional
* memory, and usually decreases the reported amount of
@@ -16,17 +14,30 @@
* chipset: reserve a page before VGA to prevent PCI prefetch
* into it (errata #56). Usually the page is reserved anyways,
* unless you have no PS/2 mouse plugged in.
+ *
+ * This functions is deliberately very conservative. Losing
+ * memory in the bottom megabyte is rarely a problem, as long
+ * as we have enough memory to install the trampoline. Using
+ * memory that is in use by the BIOS or by some DMA device
+ * the BIOS didn't shut down *is* a big problem.
*/
+
+#define BIOS_LOWMEM_KILOBYTES 0x413
+#define LOWMEM_CAP 0x9f000U /* Absolute maximum */
+#define INSANE_CUTOFF 0x20000U /* Less than this = insane */
+
void __init reserve_ebda_region(void)
{
unsigned int lowmem, ebda_addr;
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
+ /*
+ * To determine the position of the EBDA and the
+ * end of conventional memory, we need to look at
+ * the BIOS data area. In a paravirtual environment
+ * that area is absent. We'll just have to assume
+ * that the paravirt case can handle memory setup
+ * correctly, without our help.
+ */
if (paravirt_enabled())
return;
@@ -37,19 +48,23 @@ void __init reserve_ebda_region(void)
/* start of EBDA area */
ebda_addr = get_bios_ebda();
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
+ /*
+ * Note: some old Dells seem to need 4k EBDA without
+ * reporting so, so just consider the memory above 0x9f000
+ * to be off limits (bugzilla 2990).
+ */
+
+ /* If the EBDA address is below 128K, assume it is bogus */
+ if (ebda_addr < INSANE_CUTOFF)
+ ebda_addr = LOWMEM_CAP;
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
+ /* If lowmem is less than 128K, assume it is bogus */
+ if (lowmem < INSANE_CUTOFF)
+ lowmem = LOWMEM_CAP;
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
+ /* Use the lower of the lowmem and EBDA markers as the cutoff */
+ lowmem = min(lowmem, ebda_addr);
+ lowmem = min(lowmem, LOWMEM_CAP); /* Absolute cap */
/* reserve all memory between lowmem and the 1MB mark */
memblock_x86_reserve_range(lowmem, 0x100000, "* BIOS reserved");
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 5db0490..7b73c88 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -738,13 +738,15 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
return;
}
#endif
+ /* Kernel addresses are always protection faults: */
+ if (address >= TASK_SIZE)
+ error_code |= PF_PROT;
- if (unlikely(show_unhandled_signals))
+ if (likely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);
- /* Kernel addresses are always protection faults: */
tsk->thread.cr2 = address;
- tsk->thread.error_code = error_code | (address >= TASK_SIZE);
+ tsk->thread.error_code = error_code;
tsk->thread.trap_no = 14;
force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index bbaaa00..44b93da 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -831,6 +831,9 @@ int kern_addr_valid(unsigned long addr)
if (pud_none(*pud))
return 0;
+ if (pud_large(*pud))
+ return pfn_valid(pud_pfn(*pud));
+
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return 0;
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index bef9991..1de542b 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -83,9 +83,10 @@ int efi_enabled(int facility)
}
EXPORT_SYMBOL(efi_enabled);
+static bool disable_runtime = false;
static int __init setup_noefi(char *arg)
{
- clear_bit(EFI_BOOT, &x86_efi_facility);
+ disable_runtime = true;
return 0;
}
early_param("noefi", setup_noefi);
@@ -549,35 +550,37 @@ void __init efi_init(void)
set_bit(EFI_CONFIG_TABLES, &x86_efi_facility);
- /*
- * Check out the runtime services table. We need to map
- * the runtime services table so that we can grab the physical
- * address of several of the EFI runtime functions, needed to
- * set the firmware into virtual mode.
- */
- runtime = early_ioremap((unsigned long)efi.systab->runtime,
- sizeof(efi_runtime_services_t));
- if (runtime != NULL) {
- /*
- * We will only need *early* access to the following
- * two EFI runtime services before set_virtual_address_map
- * is invoked.
- */
- efi_phys.get_time = (efi_get_time_t *)runtime->get_time;
- efi_phys.set_virtual_address_map =
- (efi_set_virtual_address_map_t *)
- runtime->set_virtual_address_map;
+ if (!disable_runtime) {
/*
- * Make efi_get_time can be called before entering
- * virtual mode.
+ * Check out the runtime services table. We need to map
+ * the runtime services table so that we can grab the physical
+ * address of several of the EFI runtime functions, needed to
+ * set the firmware into virtual mode.
*/
- efi.get_time = phys_efi_get_time;
-
- set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
- } else
- printk(KERN_ERR "Could not map the EFI runtime service "
- "table!\n");
- early_iounmap(runtime, sizeof(efi_runtime_services_t));
+ runtime = early_ioremap((unsigned long)efi.systab->runtime,
+ sizeof(efi_runtime_services_t));
+ if (runtime != NULL) {
+ /*
+ * We will only need *early* access to the following
+ * two EFI runtime services before set_virtual_address_map
+ * is invoked.
+ */
+ efi_phys.get_time = (efi_get_time_t *)runtime->get_time;
+ efi_phys.set_virtual_address_map =
+ (efi_set_virtual_address_map_t *)
+ runtime->set_virtual_address_map;
+ /*
+ * Make efi_get_time can be called before entering
+ * virtual mode.
+ */
+ efi.get_time = phys_efi_get_time;
+
+ set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
+ } else
+ printk(KERN_ERR "Could not map the EFI runtime service "
+ "table!\n");
+ early_iounmap(runtime, sizeof(efi_runtime_services_t));
+ }
/* Map the EFI memory map */
memmap.map = early_ioremap((unsigned long)memmap.phys_map,
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index d69cc6c..67bc7ba 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -328,7 +328,6 @@ static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
if (per_cpu(lock_spinners, cpu) == xl) {
ADD_STATS(released_slow_kicked, 1);
xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
- break;
}
}
}
diff --git a/block/genhd.c b/block/genhd.c
index 4927476..6edf228 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -26,7 +26,7 @@ static DEFINE_MUTEX(block_class_lock);
struct kobject *block_depr;
/* for extended dynamic devt allocation, currently only one major is used */
-#define MAX_EXT_DEVT (1 << MINORBITS)
+#define NR_EXT_DEVT (1 << MINORBITS)
/* For extended devt allocation. ext_devt_mutex prevents look up
* results from going away underneath its user.
@@ -421,17 +421,18 @@ int blk_alloc_devt(struct hd_struct *part, dev_t *devt)
do {
if (!idr_pre_get(&ext_devt_idr, GFP_KERNEL))
return -ENOMEM;
+ mutex_lock(&ext_devt_mutex);
rc = idr_get_new(&ext_devt_idr, part, &idx);
+ if (!rc && idx >= NR_EXT_DEVT) {
+ idr_remove(&ext_devt_idr, idx);
+ rc = -EBUSY;
+ }
+ mutex_unlock(&ext_devt_mutex);
} while (rc == -EAGAIN);
if (rc)
return rc;
- if (idx > MAX_EXT_DEVT) {
- idr_remove(&ext_devt_idr, idx);
- return -EBUSY;
- }
-
*devt = MKDEV(BLOCK_EXT_MAJOR, blk_mangle_minor(idx));
return 0;
}
@@ -645,7 +646,6 @@ void del_gendisk(struct gendisk *disk)
disk_part_iter_exit(&piter);
invalidate_partition(disk, 0);
- blk_free_devt(disk_to_dev(disk)->devt);
set_capacity(disk, 0);
disk->flags &= ~GENHD_FL_UP;
@@ -663,6 +663,7 @@ void del_gendisk(struct gendisk *disk)
if (!sysfs_deprecated)
sysfs_remove_link(block_depr, dev_name(disk_to_dev(disk)));
device_del(disk_to_dev(disk));
+ blk_free_devt(disk_to_dev(disk)->devt);
}
EXPORT_SYMBOL(del_gendisk);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index d790791..cc9d020 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -156,6 +156,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
},
{
.callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-FW41E_H",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
+ },
+ },
+ {
+ .callback = init_nvs_nosave,
.ident = "Sony Vaio VGN-FW21E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 69ac373..df47397 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -321,6 +321,41 @@ static const struct pci_device_id piix_pci_tbl[] = {
{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
{ 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point) */
+ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Lynx Point-LP) */
+ { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (DH89xxCC) */
+ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Avoton) */
+ { 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+ /* SATA Controller IDE (Wellsburg) */
+ { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+
{ } /* terminate list */
};
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 000e7b2..8b8e8c0 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -289,7 +289,7 @@ int bus_for_each_dev(struct bus_type *bus, struct device *start,
struct device *dev;
int error = 0;
- if (!bus)
+ if (!bus || !bus->p)
return -EINVAL;
klist_iter_init_node(&bus->p->klist_devices, &i,
@@ -323,7 +323,7 @@ struct device *bus_find_device(struct bus_type *bus,
struct klist_iter i;
struct device *dev;
- if (!bus)
+ if (!bus || !bus->p)
return NULL;
klist_iter_init_node(&bus->p->klist_devices, &i,
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 86848c6..40a0fcb 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -584,12 +584,20 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
struct request sreq;
dev_info(disk_to_dev(lo->disk), "NBD_DISCONNECT\n");
+ if (!lo->sock)
+ return -EINVAL;
+ mutex_unlock(&lo->tx_lock);
+ fsync_bdev(bdev);
+ mutex_lock(&lo->tx_lock);
blk_rq_init(NULL, &sreq);
sreq.cmd_type = REQ_TYPE_SPECIAL;
nbd_cmd(&sreq) = NBD_CMD_DISC;
+
+ /* Check again after getting mutex back. */
if (!lo->sock)
return -EINVAL;
+
nbd_send_req(lo, &sreq);
return 0;
}
@@ -603,6 +611,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
nbd_clear_que(lo);
BUG_ON(!list_empty(&lo->queue_head));
BUG_ON(!list_empty(&lo->waiting_queue));
+ kill_bdev(bdev);
if (file)
fput(file);
return 0;
@@ -683,6 +692,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
lo->file = NULL;
nbd_clear_que(lo);
dev_warn(disk_to_dev(lo->disk), "queue cleared\n");
+ kill_bdev(bdev);
if (file)
fput(file);
lo->bytesize = 0;
diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c
index 48e8fee..94f6ae2 100644
--- a/drivers/block/sunvdc.c
+++ b/drivers/block/sunvdc.c
@@ -461,7 +461,7 @@ static int generic_request(struct vdc_port *port, u8 op, void *buf, int len)
int op_len, err;
void *req_buf;
- if (!(((u64)1 << ((u64)op - 1)) & port->operations))
+ if (!(((u64)1 << (u64)op) & port->operations))
return -EOPNOTSUPP;
switch (op) {
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index f759ad4..674e3c2 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -364,6 +364,7 @@ static int xen_blkbk_remove(struct xenbus_device *dev)
be->blkif = NULL;
}
+ kfree(be->mode);
kfree(be);
dev_set_drvdata(&dev->dev, NULL);
return 0;
@@ -513,6 +514,7 @@ static void backend_changed(struct xenbus_watch *watch,
= container_of(watch, struct backend_info, backend_watch);
struct xenbus_device *dev = be->dev;
int cdrom = 0;
+ unsigned long handle;
char *device_type;
DPRINTK("");
@@ -532,10 +534,10 @@ static void backend_changed(struct xenbus_watch *watch,
return;
}
- if ((be->major || be->minor) &&
- ((be->major != major) || (be->minor != minor))) {
- pr_warn(DRV_PFX "changing physical device (from %x:%x to %x:%x) not supported.\n",
- be->major, be->minor, major, minor);
+ if (be->major | be->minor) {
+ if (be->major != major || be->minor != minor)
+ pr_warn(DRV_PFX "changing physical device (from %x:%x to %x:%x) not supported.\n",
+ be->major, be->minor, major, minor);
return;
}
@@ -553,36 +555,33 @@ static void backend_changed(struct xenbus_watch *watch,
kfree(device_type);
}
- if (be->major == 0 && be->minor == 0) {
- /* Front end dir is a number, which is used as the handle. */
-
- char *p = strrchr(dev->otherend, '/') + 1;
- long handle;
- err = strict_strtoul(p, 0, &handle);
- if (err)
- return;
+ /* Front end dir is a number, which is used as the handle. */
+ err = strict_strtoul(strrchr(dev->otherend, '/') + 1, 0, &handle);
+ if (err)
+ return;
- be->major = major;
- be->minor = minor;
+ be->major = major;
+ be->minor = minor;
- err = xen_vbd_create(be->blkif, handle, major, minor,
- (NULL == strchr(be->mode, 'w')), cdrom);
- if (err) {
- be->major = 0;
- be->minor = 0;
- xenbus_dev_fatal(dev, err, "creating vbd structure");
- return;
- }
+ err = xen_vbd_create(be->blkif, handle, major, minor,
+ !strchr(be->mode, 'w'), cdrom);
+ if (err)
+ xenbus_dev_fatal(dev, err, "creating vbd structure");
+ else {
err = xenvbd_sysfs_addif(dev);
if (err) {
xen_vbd_free(&be->blkif->vbd);
- be->major = 0;
- be->minor = 0;
xenbus_dev_fatal(dev, err, "creating sysfs entries");
- return;
}
+ }
+ if (err) {
+ kfree(be->mode);
+ be->mode = NULL;
+ be->major = 0;
+ be->minor = 0;
+ } else {
/* We're potentially connected now */
xen_update_blkif_status(be->blkif);
}
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index bc6f5fa..819dfda 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -420,6 +420,11 @@ void unregister_dca_provider(struct dca_provider *dca, struct device *dev)
raw_spin_lock_irqsave(&dca_lock, flags);
+ if (list_empty(&dca_domains)) {
+ raw_spin_unlock_irqrestore(&dca_lock, flags);
+ return;
+ }
+
list_del(&dca->node);
pci_rc = dca_pci_rc_from_dev(dev);
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index f3b890d..1f3dd51 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -995,6 +995,10 @@ static void fw_device_init(struct work_struct *work)
ret = idr_pre_get(&fw_device_idr, GFP_KERNEL) ?
idr_get_new(&fw_device_idr, device, &minor) :
-ENOMEM;
+ if (minor >= 1 << MINORBITS) {
+ idr_remove(&fw_device_idr, minor);
+ minor = -ENOSPC;
+ }
up_write(&fw_device_rwsem);
if (ret < 0)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index bb95d59..9080eb7 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -87,9 +87,6 @@ static struct edid_quirk {
int product_id;
u32 quirks;
} edid_quirk_list[] = {
- /* ASUS VW222S */
- { "ACI", 0x22a2, EDID_QUIRK_FORCE_REDUCED_BLANKING },
-
/* Acer AL1706 */
{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
/* Acer F51 */
@@ -1743,7 +1740,8 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
num_modes += add_cvt_modes(connector, edid);
num_modes += add_standard_modes(connector, edid);
num_modes += add_established_modes(connector, edid);
- num_modes += add_inferred_modes(connector, edid);
+ if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF)
+ num_modes += add_inferred_modes(connector, edid);
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
edid_fixup_preferred(connector, quirks);
diff --git a/drivers/gpu/drm/drm_usb.c b/drivers/gpu/drm/drm_usb.c
index 445003f..471f453 100644
--- a/drivers/gpu/drm/drm_usb.c
+++ b/drivers/gpu/drm/drm_usb.c
@@ -19,7 +19,7 @@ int drm_get_usb_dev(struct usb_interface *interface,
usbdev = interface_to_usbdev(interface);
dev->usbdev = usbdev;
- dev->dev = &usbdev->dev;
+ dev->dev = &interface->dev;
mutex_lock(&drm_global_mutex);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 10fe480..5620192 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -756,7 +756,7 @@ static int i915_error_state(struct seq_file *m, void *unused)
seq_printf(m, "Time: %ld s %ld us\n", error->time.tv_sec,
error->time.tv_usec);
- seq_printf(m, "Kernel: " UTS_RELEASE);
+ seq_printf(m, "Kernel: " UTS_RELEASE "\n");
seq_printf(m, "PCI ID: 0x%04x\n", dev->pci_device);
seq_printf(m, "EIR: 0x%08x\n", error->eir);
seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7817429..2303c2b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -138,8 +138,8 @@ static const intel_limit_t intel_limits_i9xx_sdvo = {
.vco = { .min = 1400000, .max = 2800000 },
.n = { .min = 1, .max = 6 },
.m = { .min = 70, .max = 120 },
- .m1 = { .min = 10, .max = 22 },
- .m2 = { .min = 5, .max = 9 },
+ .m1 = { .min = 8, .max = 18 },
+ .m2 = { .min = 3, .max = 7 },
.p = { .min = 5, .max = 80 },
.p1 = { .min = 1, .max = 8 },
.p2 = { .dot_limit = 200000,
@@ -3242,6 +3242,7 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
+ u32 pctl;
if (!intel_crtc->active)
return;
@@ -3257,6 +3258,13 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
intel_disable_plane(dev_priv, plane, pipe);
intel_disable_pipe(dev_priv, pipe);
+
+ /* Disable pannel fitter if it is on this pipe. */
+ pctl = I915_READ(PFIT_CONTROL);
+ if ((pctl & PFIT_ENABLE) &&
+ ((pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT) == pipe)
+ I915_WRITE(PFIT_CONTROL, 0);
+
intel_disable_pll(dev_priv, pipe);
intel_crtc->active = false;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 0977849..60d13fe 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1137,6 +1137,8 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav
blackout &= ~BLACKOUT_MODE_MASK;
WREG32(MC_SHARED_BLACKOUT_CNTL, blackout | 1);
}
+ /* wait for the MC to settle */
+ udelay(100);
}
void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 279b863d..a23b63a 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1900,6 +1900,7 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index c15c38e..25f3290 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -506,6 +506,9 @@
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+#define USB_VENDOR_ID_MASTERKIT 0x16c0
+#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index dffdca8..f44a067 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -4140,13 +4140,19 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
{
/*
* Mobile 4 Series Chipset neglects to set RWBF capability,
- * but needs it:
+ * but needs it. Same seems to hold for the desktop versions.
*/
printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n");
rwbf_quirk = 1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e00, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e10, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e20, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e30, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e40, quirk_iommu_rwbf);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e90, quirk_iommu_rwbf);
#define GGC 0x52
#define GGC_MEMORY_SIZE_MASK (0xf << 8)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 29f9000..a47ba33 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -774,9 +774,12 @@ static ssize_t show_protocols(struct device *device,
if (dev->driver_type == RC_DRIVER_SCANCODE) {
enabled = dev->rc_map.rc_type;
allowed = dev->allowed_protos;
- } else {
+ } else if (dev->raw) {
enabled = dev->raw->enabled_protocols;
allowed = ir_raw_get_allowed_protocols();
+ } else {
+ mutex_unlock(&dev->lock);
+ return -ENODEV;
}
IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index ee0d0b3..d345215 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -206,19 +206,21 @@ static u32 omap_vout_uservirt_to_phys(u32 virtp)
struct vm_area_struct *vma;
struct mm_struct *mm = current->mm;
- vma = find_vma(mm, virtp);
/* For kernel direct-mapped memory, take the easy way */
- if (virtp >= PAGE_OFFSET) {
- physp = virt_to_phys((void *) virtp);
- } else if (vma && (vma->vm_flags & VM_IO) && vma->vm_pgoff) {
+ if (virtp >= PAGE_OFFSET)
+ return virt_to_phys((void *) virtp);
+
+ down_read(¤t->mm->mmap_sem);
+ vma = find_vma(mm, virtp);
+ if (vma && (vma->vm_flags & VM_IO) && vma->vm_pgoff) {
/* this will catch, kernel-allocated, mmaped-to-usermode
addresses */
physp = (vma->vm_pgoff << PAGE_SHIFT) + (virtp - vma->vm_start);
+ up_read(¤t->mm->mmap_sem);
} else {
/* otherwise, use get_user_pages() for general userland pages */
int res, nr_pages = 1;
struct page *pages;
- down_read(¤t->mm->mmap_sem);
res = get_user_pages(current, current->mm, virtp, nr_pages, 1,
0, &pages, NULL);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 0edd618..8b0777f 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -159,31 +159,21 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
sd->v4l2_dev = v4l2_dev;
if (sd->internal_ops && sd->internal_ops->registered) {
err = sd->internal_ops->registered(sd);
- if (err) {
- module_put(sd->owner);
- return err;
- }
+ if (err)
+ goto error_module;
}
/* This just returns 0 if either of the two args is NULL */
err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler);
- if (err) {
- if (sd->internal_ops && sd->internal_ops->unregistered)
- sd->internal_ops->unregistered(sd);
- module_put(sd->owner);
- return err;
- }
+ if (err)
+ goto error_unregister;
#if defined(CONFIG_MEDIA_CONTROLLER)
/* Register the entity. */
if (v4l2_dev->mdev) {
err = media_device_register_entity(v4l2_dev->mdev, entity);
- if (err < 0) {
- if (sd->internal_ops && sd->internal_ops->unregistered)
- sd->internal_ops->unregistered(sd);
- module_put(sd->owner);
- return err;
- }
+ if (err < 0)
+ goto error_unregister;
}
#endif
@@ -192,6 +182,14 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
spin_unlock(&v4l2_dev->lock);
return 0;
+
+error_unregister:
+ if (sd->internal_ops && sd->internal_ops->unregistered)
+ sd->internal_ops->unregistered(sd);
+error_module:
+ module_put(sd->owner);
+ sd->v4l2_dev = NULL;
+ return err;
}
EXPORT_SYMBOL_GPL(v4l2_device_register_subdev);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 1b47937..85a074f 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -232,15 +232,18 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg)
static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
if (unlikely(reg == SDHCI_HOST_VERSION)) {
- u16 val = readw(host->ioaddr + (reg ^ 2));
- /*
- * uSDHC supports SDHCI v3.0, but it's encoded as value
- * 0x3 in host controller version register, which violates
- * SDHCI_SPEC_300 definition. Work it around here.
- */
- if ((val & SDHCI_SPEC_VER_MASK) == 3)
- return --val;
+ reg ^= 2;
+ if (is_imx6q_usdhc(imx_data)) {
+ /*
+ * The usdhc register returns a wrong host version.
+ * Correct it here.
+ */
+ return SDHCI_SPEC_300;
+ }
}
return readw(host->ioaddr + reg);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index cf177b8..df5a09a 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4559,11 +4559,13 @@ void igb_update_stats(struct igb_adapter *adapter,
bytes = 0;
packets = 0;
for (i = 0; i < adapter->num_rx_queues; i++) {
- u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
+ u32 rqdpc = rd32(E1000_RQDPC(i));
struct igb_ring *ring = adapter->rx_ring[i];
- ring->rx_stats.drops += rqdpc_tmp;
- net_stats->rx_fifo_errors += rqdpc_tmp;
+ if (rqdpc) {
+ ring->rx_stats.drops += rqdpc;
+ net_stats->rx_fifo_errors += rqdpc;
+ }
do {
start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index 315b96e..9fdd198 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -169,7 +169,7 @@ struct b43_dmadesc_generic {
/* DMA engine tuning knobs */
#define B43_TXRING_SLOTS 256
-#define B43_RXRING_SLOTS 64
+#define B43_RXRING_SLOTS 256
#define B43_DMA0_RX_FW598_BUFSIZE (B43_DMA0_RX_FW598_FO + IEEE80211_MAX_FRAME_LEN)
#define B43_DMA0_RX_FW351_BUFSIZE (B43_DMA0_RX_FW351_FO + IEEE80211_MAX_FRAME_LEN)
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 7ca84c3..564218c 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -84,8 +84,8 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
- {USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
+ {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
{USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
{USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index a99be2d0..0984dcf 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -295,6 +295,7 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x817f, rtl92cu_hal_cfg)},
/* RTL8188CUS-VL */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x818a, rtl92cu_hal_cfg)},
+ {RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x819a, rtl92cu_hal_cfg)},
/* 8188 Combo for BC4 */
{RTL_USB_DEVICE(USB_VENDER_ID_REALTEK, 0x8754, rtl92cu_hal_cfg)},
@@ -372,9 +373,15 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids);
+static int rtl8192cu_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return rtl_usb_probe(intf, id, &rtl92cu_hal_cfg);
+}
+
static struct usb_driver rtl8192cu_driver = {
.name = "rtl8192cu",
- .probe = rtl_usb_probe,
+ .probe = rtl8192cu_probe,
.disconnect = rtl_usb_disconnect,
.id_table = rtl8192c_usb_ids,
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 30dd0a9..c04ee92 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -44,8 +44,12 @@
static void usbctrl_async_callback(struct urb *urb)
{
- if (urb)
- kfree(urb->context);
+ if (urb) {
+ /* free dr */
+ kfree(urb->setup_packet);
+ /* free databuf */
+ kfree(urb->transfer_buffer);
+ }
}
static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request,
@@ -57,38 +61,46 @@ static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request,
u8 reqtype;
struct usb_ctrlrequest *dr;
struct urb *urb;
- struct rtl819x_async_write_data {
- u8 data[REALTEK_USB_VENQT_MAX_BUF_SIZE];
- struct usb_ctrlrequest dr;
- } *buf;
+ const u16 databuf_maxlen = REALTEK_USB_VENQT_MAX_BUF_SIZE;
+ u8 *databuf;
+
+ if (WARN_ON_ONCE(len > databuf_maxlen))
+ len = databuf_maxlen;
pipe = usb_sndctrlpipe(udev, 0); /* write_out */
reqtype = REALTEK_USB_VENQT_WRITE;
- buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
- if (!buf)
+ dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
+ if (!dr)
return -ENOMEM;
+ databuf = kmalloc(databuf_maxlen, GFP_ATOMIC);
+ if (!databuf) {
+ kfree(dr);
+ return -ENOMEM;
+ }
+
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
- kfree(buf);
+ kfree(databuf);
+ kfree(dr);
return -ENOMEM;
}
- dr = &buf->dr;
-
dr->bRequestType = reqtype;
dr->bRequest = request;
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(len);
- memcpy(buf, pdata, len);
+ memcpy(databuf, pdata, len);
usb_fill_control_urb(urb, udev, pipe,
- (unsigned char *)dr, buf, len,
- usbctrl_async_callback, buf);
+ (unsigned char *)dr, databuf, len,
+ usbctrl_async_callback, NULL);
rc = usb_submit_urb(urb, GFP_ATOMIC);
- if (rc < 0)
- kfree(buf);
+ if (rc < 0) {
+ kfree(databuf);
+ kfree(dr);
+ }
usb_free_urb(urb);
return rc;
}
@@ -894,7 +906,8 @@ static struct rtl_intf_ops rtl_usb_ops = {
};
int __devinit rtl_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id,
+ struct rtl_hal_cfg *rtl_hal_cfg)
{
int err;
struct ieee80211_hw *hw = NULL;
@@ -928,7 +941,7 @@ int __devinit rtl_usb_probe(struct usb_interface *intf,
usb_set_intfdata(intf, hw);
/* init cfg & intf_ops */
rtlpriv->rtlhal.interface = INTF_USB;
- rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_info);
+ rtlpriv->cfg = rtl_hal_cfg;
rtlpriv->intf_ops = &rtl_usb_ops;
rtl_dbgp_flag_init(hw);
/* Init IO handler */
diff --git a/drivers/net/wireless/rtlwifi/usb.h b/drivers/net/wireless/rtlwifi/usb.h
index d2a63fb..4dc4b1c 100644
--- a/drivers/net/wireless/rtlwifi/usb.h
+++ b/drivers/net/wireless/rtlwifi/usb.h
@@ -158,7 +158,8 @@ struct rtl_usb_priv {
int __devinit rtl_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id);
+ const struct usb_device_id *id,
+ struct rtl_hal_cfg *rtl92cu_hal_cfg);
void rtl_usb_disconnect(struct usb_interface *intf);
int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
int rtl_usb_resume(struct usb_interface *pusb_intf);
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 5925e0b..8eaf0e2 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -132,6 +132,7 @@ static void xenvif_up(struct xenvif *vif)
static void xenvif_down(struct xenvif *vif)
{
disable_irq(vif->irq);
+ del_timer_sync(&vif->credit_timeout);
xen_netbk_deschedule_xenvif(vif);
xen_netbk_remove_xenvif(vif);
}
@@ -362,8 +363,6 @@ void xenvif_disconnect(struct xenvif *vif)
atomic_dec(&vif->refcnt);
wait_event(vif->waiting_to_free, atomic_read(&vif->refcnt) == 0);
- del_timer_sync(&vif->credit_timeout);
-
if (vif->irq)
unbind_from_irqhandler(vif->irq, vif);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index b802bb3..185a0eb 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -883,13 +883,13 @@ static int netbk_count_requests(struct xenvif *vif,
if (frags >= work_to_do) {
netdev_err(vif->dev, "Need more frags\n");
netbk_fatal_tx_err(vif);
- return -frags;
+ return -ENODATA;
}
if (unlikely(frags >= MAX_SKB_FRAGS)) {
netdev_err(vif->dev, "Too many frags\n");
netbk_fatal_tx_err(vif);
- return -frags;
+ return -E2BIG;
}
memcpy(txp, RING_GET_REQUEST(&vif->tx, cons + frags),
@@ -897,7 +897,7 @@ static int netbk_count_requests(struct xenvif *vif,
if (txp->size > first->size) {
netdev_err(vif->dev, "Frag is bigger than frame.\n");
netbk_fatal_tx_err(vif);
- return -frags;
+ return -EIO;
}
first->size -= txp->size;
@@ -907,7 +907,7 @@ static int netbk_count_requests(struct xenvif *vif,
netdev_err(vif->dev, "txp->offset: %x, size: %u\n",
txp->offset, txp->size);
netbk_fatal_tx_err(vif);
- return -frags;
+ return -EINVAL;
}
} while ((txp++)->flags & XEN_NETTXF_more_data);
return frags;
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 7f87bee..f53da9e 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -19,6 +19,8 @@ static void pci_free_resources(struct pci_dev *dev)
static void pci_stop_dev(struct pci_dev *dev)
{
+ pci_pme_active(dev, false);
+
if (dev->is_added) {
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index 86e4a1a..6bb02ab 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -246,6 +246,7 @@ static int pccard_init(struct pcmcia_socket *sock)
socket = &vrc4171_sockets[slot];
socket->csc_irq = search_nonuse_irq();
socket->io_irq = search_nonuse_irq();
+ spin_lock_init(&socket->lock);
return 0;
}
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index f75a4c8..3a09460 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -820,8 +820,10 @@ static ssize_t show_infos(struct device *dev,
/*
* The HWRS method return informations about the hardware.
* 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * 0x40 for WWAN, 0x10 for WIMAX.
* The significance of others is yet to be found.
- * If we don't find the method, we assume the device are present.
+ * We don't currently use this for device detection, and it
+ * takes several seconds to run on some systems.
*/
rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
@@ -1591,7 +1593,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
- unsigned long long bsts_result, hwrs_result;
+ unsigned long long bsts_result;
char *string = NULL;
acpi_status status;
@@ -1653,17 +1655,6 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
if (*string)
pr_notice(" %s model detected\n", string);
- /*
- * The HWRS method return informations about the hardware.
- * 0x80 bit is for WLAN, 0x100 for Bluetooth,
- * 0x40 for WWAN, 0x10 for WIMAX.
- * The significance of others is yet to be found.
- */
- status =
- acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
- if (!ACPI_FAILURE(status))
- pr_notice(" HWRS returned %x", (int)hwrs_result);
-
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
diff --git a/drivers/pps/clients/pps-ldisc.c b/drivers/pps/clients/pps-ldisc.c
index 79451f2..60cee9e 100644
--- a/drivers/pps/clients/pps-ldisc.c
+++ b/drivers/pps/clients/pps-ldisc.c
@@ -31,7 +31,7 @@
static void pps_tty_dcd_change(struct tty_struct *tty, unsigned int status,
struct pps_event_time *ts)
{
- struct pps_device *pps = (struct pps_device *)tty->disc_data;
+ struct pps_device *pps = pps_lookup_dev(tty);
BUG_ON(pps == NULL);
@@ -67,9 +67,9 @@ static int pps_tty_open(struct tty_struct *tty)
pr_err("cannot register PPS source \"%s\"\n", info.path);
return -ENOMEM;
}
- tty->disc_data = pps;
+ pps->lookup_cookie = tty;
- /* Should open N_TTY ldisc too */
+ /* Now open the base class N_TTY ldisc */
ret = alias_n_tty_open(tty);
if (ret < 0) {
pr_err("cannot open tty ldisc \"%s\"\n", info.path);
@@ -81,7 +81,6 @@ static int pps_tty_open(struct tty_struct *tty)
return 0;
err_unregister:
- tty->disc_data = NULL;
pps_unregister_source(pps);
return ret;
}
@@ -90,11 +89,10 @@ static void (*alias_n_tty_close)(struct tty_struct *tty);
static void pps_tty_close(struct tty_struct *tty)
{
- struct pps_device *pps = (struct pps_device *)tty->disc_data;
+ struct pps_device *pps = pps_lookup_dev(tty);
alias_n_tty_close(tty);
- tty->disc_data = NULL;
dev_info(pps->dev, "removed\n");
pps_unregister_source(pps);
}
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c
index 2baadd2..e83669f 100644
--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -247,12 +247,15 @@ static int pps_cdev_open(struct inode *inode, struct file *file)
struct pps_device *pps = container_of(inode->i_cdev,
struct pps_device, cdev);
file->private_data = pps;
-
+ kobject_get(&pps->dev->kobj);
return 0;
}
static int pps_cdev_release(struct inode *inode, struct file *file)
{
+ struct pps_device *pps = container_of(inode->i_cdev,
+ struct pps_device, cdev);
+ kobject_put(&pps->dev->kobj);
return 0;
}
@@ -274,8 +277,10 @@ static void pps_device_destruct(struct device *dev)
{
struct pps_device *pps = dev_get_drvdata(dev);
- /* release id here to protect others from using it while it's
- * still in use */
+ cdev_del(&pps->cdev);
+
+ /* Now we can release the ID for re-use */
+ pr_debug("deallocating pps%d\n", pps->id);
mutex_lock(&pps_idr_lock);
idr_remove(&pps_idr, pps->id);
mutex_unlock(&pps_idr_lock);
@@ -330,6 +335,7 @@ int pps_register_cdev(struct pps_device *pps)
if (IS_ERR(pps->dev))
goto del_cdev;
+ /* Override the release function with our own */
pps->dev->release = pps_device_destruct;
pr_debug("source %s got cdev (%d:%d)\n", pps->info.name,
@@ -350,11 +356,44 @@ free_idr:
void pps_unregister_cdev(struct pps_device *pps)
{
+ pr_debug("unregistering pps%d\n", pps->id);
+ pps->lookup_cookie = NULL;
device_destroy(pps_class, pps->dev->devt);
- cdev_del(&pps->cdev);
}
/*
+ * Look up a pps device by magic cookie.
+ * The cookie is usually a pointer to some enclosing device, but this
+ * code doesn't care; you should never be dereferencing it.
+ *
+ * This is a bit of a kludge that is currently used only by the PPS
+ * serial line discipline. It may need to be tweaked when a second user
+ * is found.
+ *
+ * There is no function interface for setting the lookup_cookie field.
+ * It's initialized to NULL when the pps device is created, and if a
+ * client wants to use it, just fill it in afterward.
+ *
+ * The cookie is automatically set to NULL in pps_unregister_source()
+ * so that it will not be used again, even if the pps device cannot
+ * be removed from the idr due to pending references holding the minor
+ * number in use.
+ */
+struct pps_device *pps_lookup_dev(void const *cookie)
+{
+ struct pps_device *pps;
+ unsigned id;
+
+ rcu_read_lock();
+ idr_for_each_entry(&pps_idr, pps, id)
+ if (cookie == pps->lookup_cookie)
+ break;
+ rcu_read_unlock();
+ return pps;
+}
+EXPORT_SYMBOL(pps_lookup_dev);
+
+/*
* Module stuff
*/
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 73816d8..1f94073 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -344,7 +344,9 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
/* Enable the clockwatch on ST Variants */
if (ldata->hw_designer == AMBA_VENDOR_ST)
data |= RTC_CR_CWEN;
- writel(data | RTC_CR_EN, ldata->base + RTC_CR);
+ else
+ data |= RTC_CR_EN;
+ writel(data, ldata->base + RTC_CR);
/*
* On ST PL031 variants, the RTC reset value does not provide correct
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 94f49ff..b1e8f6c 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -414,6 +414,26 @@ static void kvm_extint_handler(unsigned int ext_int_code,
}
/*
+ * For s390-virtio, we expect a page above main storage containing
+ * the virtio configuration. Try to actually load from this area
+ * in order to figure out if the host provides this page.
+ */
+static int __init test_devices_support(unsigned long addr)
+{
+ int ret = -EIO;
+
+ asm volatile(
+ "0: lura 0,%1\n"
+ "1: xgr %0,%0\n"
+ "2:\n"
+ EX_TABLE(0b,2b)
+ EX_TABLE(1b,2b)
+ : "+d" (ret)
+ : "a" (addr)
+ : "0", "cc");
+ return ret;
+}
+/*
* Init function for virtio
* devices are in a single page above top of "normal" mem
*/
@@ -424,21 +444,23 @@ static int __init kvm_devices_init(void)
if (!MACHINE_IS_KVM)
return -ENODEV;
+ if (test_devices_support(real_memory_size) < 0)
+ return -ENODEV;
+
+ rc = vmem_add_mapping(real_memory_size, PAGE_SIZE);
+ if (rc)
+ return rc;
+
+ kvm_devices = (void *) real_memory_size;
+
kvm_root = root_device_register("kvm_s390");
if (IS_ERR(kvm_root)) {
rc = PTR_ERR(kvm_root);
printk(KERN_ERR "Could not register kvm_s390 root device");
+ vmem_remove_mapping(real_memory_size, PAGE_SIZE);
return rc;
}
- rc = vmem_add_mapping(real_memory_size, PAGE_SIZE);
- if (rc) {
- root_device_unregister(kvm_root);
- return rc;
- }
-
- kvm_devices = (void *) real_memory_size;
-
INIT_WORK(&hotplug_work, hotplug_devices);
service_subclass_irq_register();
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index ab9f5ed..a023f52 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -136,6 +136,11 @@ static long comedi_unlocked_ioctl(struct file *file, unsigned int cmd,
/* Device config is special, because it must work on
* an unconfigured device. */
if (cmd == COMEDI_DEVCONFIG) {
+ if (minor >= COMEDI_NUM_BOARD_MINORS) {
+ /* Device config not appropriate on non-board minors. */
+ rc = -ENOTTY;
+ goto done;
+ }
rc = do_devconfig_ioctl(dev,
(struct comedi_devconfig __user *)arg);
goto done;
@@ -1569,7 +1574,7 @@ static unsigned int comedi_poll(struct file *file, poll_table * wait)
mask = 0;
read_subdev = comedi_get_read_subdevice(dev_file_info);
- if (read_subdev) {
+ if (read_subdev && read_subdev->async) {
poll_wait(file, &read_subdev->async->wait_head, wait);
if (!read_subdev->busy
|| comedi_buf_read_n_available(read_subdev->async) > 0
@@ -1579,7 +1584,7 @@ static unsigned int comedi_poll(struct file *file, poll_table * wait)
}
}
write_subdev = comedi_get_write_subdevice(dev_file_info);
- if (write_subdev) {
+ if (write_subdev && write_subdev->async) {
poll_wait(file, &write_subdev->async->wait_head, wait);
comedi_buf_write_alloc(write_subdev->async,
write_subdev->async->prealloc_bufsz);
@@ -1621,7 +1626,7 @@ static ssize_t comedi_write(struct file *file, const char __user *buf,
}
s = comedi_get_write_subdevice(dev_file_info);
- if (s == NULL) {
+ if (s == NULL || s->async == NULL) {
retval = -EIO;
goto done;
}
@@ -1732,7 +1737,7 @@ static ssize_t comedi_read(struct file *file, char __user *buf, size_t nbytes,
}
s = comedi_get_read_subdevice(dev_file_info);
- if (s == NULL) {
+ if (s == NULL || s->async == NULL) {
retval = -EIO;
goto done;
}
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 721b2be..0517a23 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1264,7 +1264,9 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
else
channel = CR_CHAN(cmd->chanlist[0]);
/* munge channel bits for differential / scan disabled mode */
- if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF)
+ if ((labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN ||
+ labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN_INTERVAL) &&
+ aref == AREF_DIFF)
channel *= 2;
devpriv->command1_bits |= ADC_CHAN_BITS(channel);
devpriv->command1_bits |= thisboard->ai_range_code[range];
@@ -1280,21 +1282,6 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->write_byte(devpriv->command1_bits,
dev->iobase + COMMAND1_REG);
}
- /* setup any external triggering/pacing (command4 register) */
- devpriv->command4_bits = 0;
- if (cmd->convert_src != TRIG_EXT)
- devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
- /* XXX should discard first scan when using interval scanning
- * since manual says it is not synced with scan clock */
- if (labpc_use_continuous_mode(cmd) == 0) {
- devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
- if (cmd->scan_begin_src == TRIG_EXT)
- devpriv->command4_bits |= EXT_SCAN_EN_BIT;
- }
- /* single-ended/differential */
- if (aref == AREF_DIFF)
- devpriv->command4_bits |= ADC_DIFF_BIT;
- devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
devpriv->write_byte(cmd->chanlist_len,
dev->iobase + INTERVAL_COUNT_REG);
@@ -1374,6 +1361,22 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
+ /* setup any external triggering/pacing (command4 register) */
+ devpriv->command4_bits = 0;
+ if (cmd->convert_src != TRIG_EXT)
+ devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+ /* XXX should discard first scan when using interval scanning
+ * since manual says it is not synced with scan clock */
+ if (labpc_use_continuous_mode(cmd) == 0) {
+ devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
+ if (cmd->scan_begin_src == TRIG_EXT)
+ devpriv->command4_bits |= EXT_SCAN_EN_BIT;
+ }
+ /* single-ended/differential */
+ if (aref == AREF_DIFF)
+ devpriv->command4_bits |= ADC_DIFF_BIT;
+ devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+
/* startup acquisition */
/* command2 reg */
diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c
index b5130c8..e2f5c81 100644
--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -46,7 +46,7 @@ static int misc_registered;
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\x01+3p" } },
{ CAPS_STOP, .u.s = {"\x01-3p" } },
- { RATE, .u.n = {"\x01%ds", 5, 0, 9, 0, 0, NULL } },
+ { RATE, .u.n = {"\x01%ds", 2, 0, 9, 0, 0, NULL } },
{ PITCH, .u.n = {"\x01%dp", 5, 0, 9, 0, 0, NULL } },
{ VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
{ TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 09de99f..2594a31 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -242,7 +242,7 @@ static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
if (is_partial_io(bvec)) {
/* Use a temporary buffer to decompress the page */
- uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
if (!uncmem) {
pr_info("Error allocating temp memory!\n");
return -ENOMEM;
@@ -338,7 +338,7 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
* This is a partial IO. We need to read the full page
* before to write the changes.
*/
- uncmem = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ uncmem = kmalloc(PAGE_SIZE, GFP_NOIO);
if (!uncmem) {
pr_info("Error allocating temp memory!\n");
ret = -ENOMEM;
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index a0143a0..5def359 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1439,24 +1439,18 @@ static struct se_lun *core_dev_get_lun(struct se_portal_group *tpg, u32 unpacked
struct se_lun_acl *core_dev_init_initiator_node_lun_acl(
struct se_portal_group *tpg,
+ struct se_node_acl *nacl,
u32 mapped_lun,
- char *initiatorname,
int *ret)
{
struct se_lun_acl *lacl;
- struct se_node_acl *nacl;
- if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) {
+ if (strlen(nacl->initiatorname) >= TRANSPORT_IQN_LEN) {
pr_err("%s InitiatorName exceeds maximum size.\n",
tpg->se_tpg_tfo->get_fabric_name());
*ret = -EOVERFLOW;
return NULL;
}
- nacl = core_tpg_get_initiator_node_acl(tpg, initiatorname);
- if (!nacl) {
- *ret = -EINVAL;
- return NULL;
- }
lacl = kzalloc(sizeof(struct se_lun_acl), GFP_KERNEL);
if (!lacl) {
pr_err("Unable to allocate memory for struct se_lun_acl.\n");
@@ -1467,7 +1461,8 @@ struct se_lun_acl *core_dev_init_initiator_node_lun_acl(
INIT_LIST_HEAD(&lacl->lacl_list);
lacl->mapped_lun = mapped_lun;
lacl->se_lun_nacl = nacl;
- snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname);
+ snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s",
+ nacl->initiatorname);
return lacl;
}
diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c
index 09b6f87..60009bd 100644
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -354,9 +354,17 @@ static struct config_group *target_fabric_make_mappedlun(
ret = -EINVAL;
goto out;
}
+ if (mapped_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) {
+ pr_err("Mapped LUN: %lu exceeds TRANSPORT_MAX_LUNS_PER_TPG"
+ "-1: %u for Target Portal Group: %u\n", mapped_lun,
+ TRANSPORT_MAX_LUNS_PER_TPG-1,
+ se_tpg->se_tpg_tfo->tpg_get_tag(se_tpg));
+ ret = -EINVAL;
+ goto out;
+ }
- lacl = core_dev_init_initiator_node_lun_acl(se_tpg, mapped_lun,
- config_item_name(acl_ci), &ret);
+ lacl = core_dev_init_initiator_node_lun_acl(se_tpg, se_nacl,
+ mapped_lun, &ret);
if (!lacl) {
ret = -EINVAL;
goto out;
diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c
index d91fe44..d048e33 100644
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -117,16 +117,10 @@ struct se_node_acl *core_tpg_get_initiator_node_acl(
struct se_node_acl *acl;
spin_lock_irq(&tpg->acl_node_lock);
- list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
- if (!strcmp(acl->initiatorname, initiatorname) &&
- !acl->dynamic_node_acl) {
- spin_unlock_irq(&tpg->acl_node_lock);
- return acl;
- }
- }
+ acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
spin_unlock_irq(&tpg->acl_node_lock);
- return NULL;
+ return acl;
}
/* core_tpg_add_node_to_devs():
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 90dad17..6748568 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -2695,7 +2695,7 @@ serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
if (ser->irq >= nr_irqs || ser->irq < 0 ||
ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
+ ser->type == PORT_STARTECH || uart_config[ser->type].name == NULL)
return -EINVAL;
return 0;
}
@@ -2705,7 +2705,7 @@ serial8250_type(struct uart_port *port)
{
int type = port->type;
- if (type >= ARRAY_SIZE(uart_config))
+ if (type >= ARRAY_SIZE(uart_config) || uart_config[type].name == NULL)
type = 0;
return uart_config[type].name;
}
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 9314d93..937f927 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -618,7 +618,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt)
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
- return -EINTR;
+ return -ERESTARTSYS;
}
tty_set_termios(tty, &tmp_termios);
@@ -685,7 +685,7 @@ static int set_termiox(struct tty_struct *tty, void __user *arg, int opt)
if (opt & TERMIOS_WAIT) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
- return -EINTR;
+ return -ERESTARTSYS;
}
mutex_lock(&tty->termios_mutex);
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index e716839..632df54 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -657,7 +657,7 @@ static inline void save_screen(struct vc_data *vc)
* Redrawing of screen
*/
-static void clear_buffer_attributes(struct vc_data *vc)
+void clear_buffer_attributes(struct vc_data *vc)
{
unsigned short *p = (unsigned short *)vc->vc_origin;
int count = vc->vc_screenbuf_size / 2;
@@ -3016,7 +3016,7 @@ int __init vty_init(const struct file_operations *console_fops)
static struct class *vtconsole_class;
-static int bind_con_driver(const struct consw *csw, int first, int last,
+static int do_bind_con_driver(const struct consw *csw, int first, int last,
int deflt)
{
struct module *owner = csw->owner;
@@ -3027,7 +3027,7 @@ static int bind_con_driver(const struct consw *csw, int first, int last,
if (!try_module_get(owner))
return -ENODEV;
- console_lock();
+ WARN_CONSOLE_UNLOCKED();
/* check if driver is registered */
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
@@ -3112,11 +3112,22 @@ static int bind_con_driver(const struct consw *csw, int first, int last,
retval = 0;
err:
- console_unlock();
module_put(owner);
return retval;
};
+
+static int bind_con_driver(const struct consw *csw, int first, int last,
+ int deflt)
+{
+ int ret;
+
+ console_lock();
+ ret = do_bind_con_driver(csw, first, last, deflt);
+ console_unlock();
+ return ret;
+}
+
#ifdef CONFIG_VT_HW_CONSOLE_BINDING
static int con_is_graphics(const struct consw *csw, int first, int last)
{
@@ -3153,6 +3164,18 @@ static int con_is_graphics(const struct consw *csw, int first, int last)
*/
int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
{
+ int retval;
+
+ console_lock();
+ retval = do_unbind_con_driver(csw, first, last, deflt);
+ console_unlock();
+ return retval;
+}
+EXPORT_SYMBOL(unbind_con_driver);
+
+/* unlocked version of unbind_con_driver() */
+int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
+{
struct module *owner = csw->owner;
const struct consw *defcsw = NULL;
struct con_driver *con_driver = NULL, *con_back = NULL;
@@ -3161,7 +3184,7 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
if (!try_module_get(owner))
return -ENODEV;
- console_lock();
+ WARN_CONSOLE_UNLOCKED();
/* check if driver is registered and if it is unbindable */
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
@@ -3174,10 +3197,8 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
}
}
- if (retval) {
- console_unlock();
+ if (retval)
goto err;
- }
retval = -ENODEV;
@@ -3193,15 +3214,11 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
}
}
- if (retval) {
- console_unlock();
+ if (retval)
goto err;
- }
- if (!con_is_bound(csw)) {
- console_unlock();
+ if (!con_is_bound(csw))
goto err;
- }
first = max(first, con_driver->first);
last = min(last, con_driver->last);
@@ -3228,15 +3245,14 @@ int unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
if (!con_is_bound(csw))
con_driver->flag &= ~CON_DRIVER_FLAG_INIT;
- console_unlock();
/* ignore return value, binding should not fail */
- bind_con_driver(defcsw, first, last, deflt);
+ do_bind_con_driver(defcsw, first, last, deflt);
err:
module_put(owner);
return retval;
}
-EXPORT_SYMBOL(unbind_con_driver);
+EXPORT_SYMBOL_GPL(do_unbind_con_driver);
static int vt_bind(struct con_driver *con)
{
@@ -3508,28 +3524,18 @@ int con_debug_leave(void)
}
EXPORT_SYMBOL_GPL(con_debug_leave);
-/**
- * register_con_driver - register console driver to console layer
- * @csw: console driver
- * @first: the first console to take over, minimum value is 0
- * @last: the last console to take over, maximum value is MAX_NR_CONSOLES -1
- *
- * DESCRIPTION: This function registers a console driver which can later
- * bind to a range of consoles specified by @first and @last. It will
- * also initialize the console driver by calling con_startup().
- */
-int register_con_driver(const struct consw *csw, int first, int last)
+static int do_register_con_driver(const struct consw *csw, int first, int last)
{
struct module *owner = csw->owner;
struct con_driver *con_driver;
const char *desc;
int i, retval = 0;
+ WARN_CONSOLE_UNLOCKED();
+
if (!try_module_get(owner))
return -ENODEV;
- console_lock();
-
for (i = 0; i < MAX_NR_CON_DRIVER; i++) {
con_driver = ®istered_con_driver[i];
@@ -3582,10 +3588,29 @@ int register_con_driver(const struct consw *csw, int first, int last)
}
err:
- console_unlock();
module_put(owner);
return retval;
}
+
+/**
+ * register_con_driver - register console driver to console layer
+ * @csw: console driver
+ * @first: the first console to take over, minimum value is 0
+ * @last: the last console to take over, maximum value is MAX_NR_CONSOLES -1
+ *
+ * DESCRIPTION: This function registers a console driver which can later
+ * bind to a range of consoles specified by @first and @last. It will
+ * also initialize the console driver by calling con_startup().
+ */
+int register_con_driver(const struct consw *csw, int first, int last)
+{
+ int retval;
+
+ console_lock();
+ retval = do_register_con_driver(csw, first, last);
+ console_unlock();
+ return retval;
+}
EXPORT_SYMBOL(register_con_driver);
/**
@@ -3601,9 +3626,18 @@ EXPORT_SYMBOL(register_con_driver);
*/
int unregister_con_driver(const struct consw *csw)
{
- int i, retval = -ENODEV;
+ int retval;
console_lock();
+ retval = do_unregister_con_driver(csw);
+ console_unlock();
+ return retval;
+}
+EXPORT_SYMBOL(unregister_con_driver);
+
+int do_unregister_con_driver(const struct consw *csw)
+{
+ int i, retval = -ENODEV;
/* cannot unregister a bound driver */
if (con_is_bound(csw))
@@ -3629,27 +3663,53 @@ int unregister_con_driver(const struct consw *csw)
}
}
err:
- console_unlock();
return retval;
}
-EXPORT_SYMBOL(unregister_con_driver);
+EXPORT_SYMBOL_GPL(do_unregister_con_driver);
/*
* If we support more console drivers, this function is used
* when a driver wants to take over some existing consoles
* and become default driver for newly opened ones.
*
- * take_over_console is basically a register followed by unbind
+ * take_over_console is basically a register followed by unbind
+ */
+int do_take_over_console(const struct consw *csw, int first, int last, int deflt)
+{
+ int err;
+
+ err = do_register_con_driver(csw, first, last);
+ /*
+ * If we get an busy error we still want to bind the console driver
+ * and return success, as we may have unbound the console driver
+ * but not unregistered it.
+ */
+ if (err == -EBUSY)
+ err = 0;
+ if (!err)
+ do_bind_con_driver(csw, first, last, deflt);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(do_take_over_console);
+
+/*
+ * If we support more console drivers, this function is used
+ * when a driver wants to take over some existing consoles
+ * and become default driver for newly opened ones.
+ *
+ * take_over_console is basically a register followed by unbind
*/
int take_over_console(const struct consw *csw, int first, int last, int deflt)
{
int err;
err = register_con_driver(csw, first, last);
- /* if we get an busy error we still want to bind the console driver
+ /*
+ * If we get an busy error we still want to bind the console driver
* and return success, as we may have unbound the console driver
- * but not unregistered it.
- */
+ * but not unregistered it.
+ */
if (err == -EBUSY)
err = 0;
if (!err)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index c77f0d6..9f3003e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -541,22 +541,10 @@ int usb_match_device(struct usb_device *dev, const struct usb_device_id *id)
}
/* returns 0 if no match, 1 if match */
-int usb_match_one_id(struct usb_interface *interface,
- const struct usb_device_id *id)
+int usb_match_one_id_intf(struct usb_device *dev,
+ struct usb_host_interface *intf,
+ const struct usb_device_id *id)
{
- struct usb_host_interface *intf;
- struct usb_device *dev;
-
- /* proc_connectinfo in devio.c may call us with id == NULL. */
- if (id == NULL)
- return 0;
-
- intf = interface->cur_altsetting;
- dev = interface_to_usbdev(interface);
-
- if (!usb_match_device(dev, id))
- return 0;
-
/* The interface class, subclass, and protocol should never be
* checked for a match if the device class is Vendor Specific,
* unless the match record specifies the Vendor ID. */
@@ -581,6 +569,26 @@ int usb_match_one_id(struct usb_interface *interface,
return 1;
}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *intf;
+ struct usb_device *dev;
+
+ /* proc_connectinfo in devio.c may call us with id == NULL. */
+ if (id == NULL)
+ return 0;
+
+ intf = interface->cur_altsetting;
+ dev = interface_to_usbdev(interface);
+
+ if (!usb_match_device(dev, id))
+ return 0;
+
+ return usb_match_one_id_intf(dev, intf, id);
+}
EXPORT_SYMBOL_GPL(usb_match_one_id);
/**
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 0ff8e9a..2564d8d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1883,7 +1883,7 @@ static int usb_enumerate_device(struct usb_device *udev)
if (err < 0) {
dev_err(&udev->dev, "can't read configurations, error %d\n",
err);
- goto fail;
+ return err;
}
}
if (udev->wusb == 1 && udev->authorized == 0) {
@@ -1899,8 +1899,12 @@ static int usb_enumerate_device(struct usb_device *udev)
udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
}
err = usb_enumerate_device_otg(udev);
-fail:
- return err;
+ if (err < 0)
+ return err;
+
+ usb_detect_interface_quirks(udev);
+
+ return 0;
}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 3f08c09..0aaa4f1 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -15,17 +15,22 @@
#include <linux/usb/quirks.h>
#include "usb.h"
-/* List of quirky USB devices. Please keep this list ordered by:
+/* Lists of quirky USB devices, split in device quirks and interface quirks.
+ * Device quirks are applied at the very beginning of the enumeration process,
+ * right after reading the device descriptor. They can thus only match on device
+ * information.
+ *
+ * Interface quirks are applied after reading all the configuration descriptors.
+ * They can match on both device and interface information.
+ *
+ * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
+ * interface quirks, as they only influence the enumeration process which is run
+ * before processing the interface quirks.
+ *
+ * Please keep the lists ordered by:
* 1) Vendor ID
* 2) Product ID
* 3) Class ID
- *
- * as we want specific devices to be overridden first, and only after that, any
- * class specific quirks.
- *
- * Right now the logic aborts if it finds a valid device in the table, we might
- * want to change that in the future if it turns out that a whole class of
- * devices is broken...
*/
static const struct usb_device_id usb_quirk_list[] = {
/* CBM - Flash disk */
@@ -41,53 +46,23 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C200 */
- { USB_DEVICE(0x046d, 0x0802), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C250 */
- { USB_DEVICE(0x046d, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C300 */
- { USB_DEVICE(0x046d, 0x0805), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam B/C500 */
- { USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C600 */
- { USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam Pro 9000 */
- { USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Fusion */
+ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C905 */
- { USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Orbit MP */
+ { USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C210 */
- { USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Pro for Notebook */
+ { USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C260 */
- { USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam Pro 5000 */
+ { USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C310 */
- { USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam OEM Dell Notebook */
+ { USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech Webcam C910 */
- { USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C160 */
- { USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Webcam C270 */
- { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Quickcam Pro 9000 */
- { USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Quickcam E3500 */
- { USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
-
- /* Logitech Quickcam Vision Pro */
- { USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech Quickcam OEM Cisco VT Camera II */
+ { USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
@@ -163,16 +138,57 @@ static const struct usb_device_id usb_quirk_list[] = {
{ } /* terminating entry must be last */
};
-static const struct usb_device_id *find_id(struct usb_device *udev)
+static const struct usb_device_id usb_interface_quirk_list[] = {
+ /* Logitech UVC Cameras */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
+ .driver_info = USB_QUIRK_RESET_RESUME },
+
+ { } /* terminating entry must be last */
+};
+
+static bool usb_match_any_interface(struct usb_device *udev,
+ const struct usb_device_id *id)
{
- const struct usb_device_id *id = usb_quirk_list;
+ unsigned int i;
- for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass ||
- id->driver_info; id++) {
- if (usb_match_device(udev, id))
- return id;
+ for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
+ struct usb_host_config *cfg = &udev->config[i];
+ unsigned int j;
+
+ for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
+ struct usb_interface_cache *cache;
+ struct usb_host_interface *intf;
+
+ cache = cfg->intf_cache[j];
+ if (cache->num_altsetting == 0)
+ continue;
+
+ intf = &cache->altsetting[0];
+ if (usb_match_one_id_intf(udev, intf, id))
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static u32 __usb_detect_quirks(struct usb_device *udev,
+ const struct usb_device_id *id)
+{
+ u32 quirks = 0;
+
+ for (; id->match_flags; id++) {
+ if (!usb_match_device(udev, id))
+ continue;
+
+ if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
+ !usb_match_any_interface(udev, id))
+ continue;
+
+ quirks |= (u32)(id->driver_info);
}
- return NULL;
+
+ return quirks;
}
/*
@@ -180,14 +196,10 @@ static const struct usb_device_id *find_id(struct usb_device *udev)
*/
void usb_detect_quirks(struct usb_device *udev)
{
- const struct usb_device_id *id = usb_quirk_list;
-
- id = find_id(udev);
- if (id)
- udev->quirks = (u32)(id->driver_info);
+ udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
- udev->quirks);
+ udev->quirks);
/* For the present, all devices default to USB-PERSIST enabled */
#if 0 /* was: #ifdef CONFIG_PM */
@@ -204,3 +216,16 @@ void usb_detect_quirks(struct usb_device *udev)
udev->persist_enabled = 1;
#endif /* CONFIG_PM */
}
+
+void usb_detect_interface_quirks(struct usb_device *udev)
+{
+ u32 quirks;
+
+ quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
+ if (quirks == 0)
+ return;
+
+ dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
+ quirks);
+ udev->quirks |= quirks;
+}
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 45e8479..3e1159b 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -24,6 +24,7 @@ extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
extern int usb_deauthorize_device(struct usb_device *);
extern int usb_authorize_device(struct usb_device *);
extern void usb_detect_quirks(struct usb_device *udev);
+extern void usb_detect_interface_quirks(struct usb_device *udev);
extern int usb_remove_device(struct usb_device *udev);
extern int usb_get_device_descriptor(struct usb_device *dev,
@@ -35,6 +36,9 @@ extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern int usb_choose_configuration(struct usb_device *udev);
extern void usb_kick_khubd(struct usb_device *dev);
+extern int usb_match_one_id_intf(struct usb_device *dev,
+ struct usb_host_interface *intf,
+ const struct usb_device_id *id);
extern int usb_match_device(struct usb_device *dev,
const struct usb_device_id *id);
extern void usb_forced_unbind_intf(struct usb_interface *intf);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e39b029..d4159b8 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -337,7 +337,7 @@ static const struct hc_driver ehci_omap_hc_driver = {
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
-MODULE_ALIAS("platform:omap-ehci");
+MODULE_ALIAS("platform:ehci-omap");
MODULE_AUTHOR("Texas Instruments, Inc.");
MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d644a66..71c4696 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1916,24 +1916,22 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected) {
- /* Disable flow control */
- if (!on && usb_control_msg(port->serial->dev,
+ /* Disable flow control */
+ if (!on) {
+ if (usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_FLOW_CTRL_REQUEST,
FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
0, priv->interface, NULL, 0,
WDR_TIMEOUT) < 0) {
- dev_err(&port->dev, "error from flowcontrol urb\n");
+ dev_err(&port->dev, "error from flowcontrol urb\n");
}
- /* drop RTS and DTR */
- if (on)
- set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- else
- clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
- mutex_unlock(&port->serial->disc_mutex);
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/*
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d3addb2..de0bb8e 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -558,19 +558,15 @@ static void mct_u232_dtr_rts(struct usb_serial_port *port, int on)
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected) {
- /* drop DTR and RTS */
- spin_lock_irq(&priv->lock);
- if (on)
- priv->control_state |= TIOCM_DTR | TIOCM_RTS;
- else
- priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- control_state = priv->control_state;
- spin_unlock_irq(&priv->lock);
- mct_u232_set_modem_ctrl(port->serial, control_state);
- }
- mutex_unlock(&port->serial->disc_mutex);
+ spin_lock_irq(&priv->lock);
+ if (on)
+ priv->control_state |= TIOCM_DTR | TIOCM_RTS;
+ else
+ priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ control_state = priv->control_state;
+ spin_unlock_irq(&priv->lock);
+
+ mct_u232_set_modem_ctrl(port->serial, control_state);
}
static void mct_u232_close(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 52cd814..24a3ea6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -479,6 +479,7 @@ static const struct option_blacklist_info four_g_w14_blacklist = {
static const struct option_blacklist_info alcatel_x200_blacklist = {
.sendsetup = BIT(0) | BIT(1),
+ .reserved = BIT(4),
};
static const struct option_blacklist_info zte_0037_blacklist = {
@@ -575,8 +576,14 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
+ { USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -1215,7 +1222,14 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
- { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
+ .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052),
+ .driver_info = (kernel_ulong_t)&net_intf6_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index e1f1ebd..a7fa673 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -891,19 +891,13 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
static void sierra_dtr_rts(struct usb_serial_port *port, int on)
{
- struct usb_serial *serial = port->serial;
struct sierra_port_private *portdata;
portdata = usb_get_serial_port_data(port);
portdata->rts_state = on;
portdata->dtr_state = on;
- if (serial->dev) {
- mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
- sierra_send_setup(port);
- mutex_unlock(&serial->disc_mutex);
- }
+ sierra_send_setup(port);
}
static int sierra_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 87362e4..fff7f17 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -533,19 +533,16 @@ static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
dbg("%s\n", __func__);
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected) {
- /* Disable flow control */
- if (!on &&
- ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
+ /* Disable flow control */
+ if (!on) {
+ if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
dev_err(&port->dev, "error from flowcontrol urb\n");
- /* drop RTS and DTR */
- if (on)
- set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
- else
- clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
}
- mutex_unlock(&port->serial->disc_mutex);
+ /* drop RTS and DTR */
+ if (on)
+ set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+ else
+ clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
}
static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e5206de..dc1ce62 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -697,9 +697,20 @@ static int serial_carrier_raised(struct tty_port *port)
static void serial_dtr_rts(struct tty_port *port, int on)
{
struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
- struct usb_serial_driver *drv = p->serial->type;
- if (drv->dtr_rts)
+ struct usb_serial *serial = p->serial;
+ struct usb_serial_driver *drv = serial->type;
+
+ if (!drv->dtr_rts)
+ return;
+ /*
+ * Work-around bug in the tty-layer which can result in dtr_rts
+ * being called after a disconnect (and tty_unregister_device
+ * has returned). Remove once bug has been squashed.
+ */
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
drv->dtr_rts(p, on);
+ mutex_unlock(&serial->disc_mutex);
}
static const struct tty_port_operations serial_port_ops = {
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index d555ca9..6c92301 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -41,7 +41,6 @@ static int debug;
void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
{
- struct usb_serial *serial = port->serial;
struct usb_wwan_port_private *portdata;
struct usb_wwan_intf_private *intfdata;
@@ -54,12 +53,11 @@ void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
return;
portdata = usb_get_serial_port_data(port);
- mutex_lock(&serial->disc_mutex);
+ /* FIXME: locking */
portdata->rts_state = on;
portdata->dtr_state = on;
- if (serial->dev)
- intfdata->send_setup(port);
- mutex_unlock(&serial->disc_mutex);
+
+ intfdata->send_setup(port);
}
EXPORT_SYMBOL(usb_wwan_dtr_rts);
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 16b0bf0..7ab9046 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -147,7 +147,7 @@ static int usb_stor_huawei_dongles_pid(struct us_data *us)
int idProduct;
idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = us->pusb_dev->descriptor.idProduct;
+ idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
/* The first port is CDROM,
* means the dongle in the single port mode,
* and a switch command is required to be sent. */
@@ -169,7 +169,7 @@ int usb_stor_huawei_init(struct us_data *us)
int result = 0;
if (usb_stor_huawei_dongles_pid(us)) {
- if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+ if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
result = usb_stor_huawei_scsi_init(us);
else
result = usb_stor_huawei_feature_init(us);
diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h
index 2c85530..65a6a75 100644
--- a/drivers/usb/storage/unusual_cypress.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -31,7 +31,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x9999,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219,
"Super Top",
"USB 2.0 SATA BRIDGE",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index ae66278..be32b1b 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1073,7 +1073,7 @@ static int translate_desc(struct vhost_dev *dev, u64 addr, u32 len,
}
_iov = iov + ret;
size = reg->memory_size - addr + reg->guest_phys_addr;
- _iov->iov_len = min((u64)len, size);
+ _iov->iov_len = min((u64)len - s, size);
_iov->iov_base = (void __user *)(unsigned long)
(reg->userspace_addr + addr - reg->guest_phys_addr);
s += size;
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 66bc74d..b35c857 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -791,7 +791,7 @@ static int adp8860_i2c_suspend(struct i2c_client *client, pm_message_t message)
static int adp8860_i2c_resume(struct i2c_client *client)
{
- adp8860_set_bits(client, ADP8860_MDCR, NSTBY);
+ adp8860_set_bits(client, ADP8860_MDCR, NSTBY | BLEN);
return 0;
}
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 6c68a68..25a9b3a 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -965,7 +965,7 @@ static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message)
static int adp8870_i2c_resume(struct i2c_client *client)
{
- adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
+ adp8870_set_bits(client, ADP8870_MDCR, NSTBY | BLEN);
return 0;
}
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index bf9a9b7..9b8bcab 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -530,6 +530,33 @@ static int search_for_mapped_con(void)
return retval;
}
+static int do_fbcon_takeover(int show_logo)
+{
+ int err, i;
+
+ if (!num_registered_fb)
+ return -ENODEV;
+
+ if (!show_logo)
+ logo_shown = FBCON_LOGO_DONTSHOW;
+
+ for (i = first_fb_vc; i <= last_fb_vc; i++)
+ con2fb_map[i] = info_idx;
+
+ err = do_take_over_console(&fb_con, first_fb_vc, last_fb_vc,
+ fbcon_is_default);
+
+ if (err) {
+ for (i = first_fb_vc; i <= last_fb_vc; i++)
+ con2fb_map[i] = -1;
+ info_idx = -1;
+ } else {
+ fbcon_has_console_bind = 1;
+ }
+
+ return err;
+}
+
static int fbcon_takeover(int show_logo)
{
int err, i;
@@ -991,7 +1018,7 @@ static const char *fbcon_startup(void)
}
/* Setup default font */
- if (!p->fontdata) {
+ if (!p->fontdata && !vc->vc_font.data) {
if (!fontname[0] || !(font = find_font(fontname)))
font = get_default_font(info->var.xres,
info->var.yres,
@@ -1001,6 +1028,8 @@ static const char *fbcon_startup(void)
vc->vc_font.height = font->height;
vc->vc_font.data = (void *)(p->fontdata = font->data);
vc->vc_font.charcount = 256; /* FIXME Need to support more fonts */
+ } else {
+ p->fontdata = vc->vc_font.data;
}
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
@@ -1160,9 +1189,9 @@ static void fbcon_init(struct vc_data *vc, int init)
ops->p = &fb_display[fg_console];
}
-static void fbcon_free_font(struct display *p)
+static void fbcon_free_font(struct display *p, bool freefont)
{
- if (p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
+ if (freefont && p->userfont && p->fontdata && (--REFCOUNT(p->fontdata) == 0))
kfree(p->fontdata - FONT_EXTRA_WORDS * sizeof(int));
p->fontdata = NULL;
p->userfont = 0;
@@ -1174,8 +1203,8 @@ static void fbcon_deinit(struct vc_data *vc)
struct fb_info *info;
struct fbcon_ops *ops;
int idx;
+ bool free_font = true;
- fbcon_free_font(p);
idx = con2fb_map[vc->vc_num];
if (idx == -1)
@@ -1186,6 +1215,8 @@ static void fbcon_deinit(struct vc_data *vc)
if (!info)
goto finished;
+ if (info->flags & FBINFO_MISC_FIRMWARE)
+ free_font = false;
ops = info->fbcon_par;
if (!ops)
@@ -1197,6 +1228,8 @@ static void fbcon_deinit(struct vc_data *vc)
ops->flags &= ~FBCON_FLAGS_INIT;
finished:
+ fbcon_free_font(p, free_font);
+
if (!con_is_bound(&fb_con))
fbcon_exit();
@@ -2978,7 +3011,7 @@ static int fbcon_unbind(void)
{
int ret;
- ret = unbind_con_driver(&fb_con, first_fb_vc, last_fb_vc,
+ ret = do_unbind_con_driver(&fb_con, first_fb_vc, last_fb_vc,
fbcon_is_default);
if (!ret)
@@ -3051,7 +3084,7 @@ static int fbcon_fb_unregistered(struct fb_info *info)
primary_device = -1;
if (!num_registered_fb)
- unregister_con_driver(&fb_con);
+ do_unregister_con_driver(&fb_con);
return 0;
}
@@ -3116,7 +3149,7 @@ static int fbcon_fb_registered(struct fb_info *info)
}
if (info_idx != -1)
- ret = fbcon_takeover(1);
+ ret = do_fbcon_takeover(1);
} else {
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map_boot[i] == idx)
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index d449a74..5855d17 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1064,7 +1064,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
unsigned short video_port_status = vga_video_port_reg + 6;
int font_select = 0x00, beg, i;
char *charmap;
-
+ bool clear_attribs = false;
if (vga_video_type != VIDEO_TYPE_EGAM) {
charmap = (char *) VGA_MAP_MEM(colourmap, 0);
beg = 0x0e;
@@ -1169,12 +1169,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
/* if 512 char mode is already enabled don't re-enable it. */
if ((set) && (ch512 != vga_512_chars)) {
- /* attribute controller */
- for (i = 0; i < MAX_NR_CONSOLES; i++) {
- struct vc_data *c = vc_cons[i].d;
- if (c && c->vc_sw == &vga_con)
- c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
- }
vga_512_chars = ch512;
/* 256-char: enable intensity bit
512-char: disable intensity bit */
@@ -1185,8 +1179,22 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
it means, but it works, and it appears necessary */
inb_p(video_port_status);
vga_wattr(state->vgabase, VGA_AR_ENABLE_DISPLAY, 0);
+ clear_attribs = true;
}
raw_spin_unlock_irq(&vga_lock);
+
+ if (clear_attribs) {
+ for (i = 0; i < MAX_NR_CONSOLES; i++) {
+ struct vc_data *c = vc_cons[i].d;
+ if (c && c->vc_sw == &vga_con) {
+ /* force hi font mask to 0, so we always clear
+ the bit on either transition */
+ c->vc_hi_font_mask = 0x00;
+ clear_buffer_attributes(c);
+ c->vc_hi_font_mask = ch512 ? 0x0800 : 0;
+ }
+ }
+ }
return 0;
}
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 7a41220..c133dde 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1628,7 +1628,9 @@ static int do_register_framebuffer(struct fb_info *fb_info)
event.info = fb_info;
if (!lock_fb_info(fb_info))
return -ENODEV;
+ console_lock();
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+ console_unlock();
unlock_fb_info(fb_info);
return 0;
}
@@ -1644,8 +1646,10 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
if (!lock_fb_info(fb_info))
return -ENODEV;
+ console_lock();
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ console_unlock();
unlock_fb_info(fb_info);
if (ret)
@@ -1660,7 +1664,9 @@ static int do_unregister_framebuffer(struct fb_info *fb_info)
num_registered_fb--;
fb_cleanup_device(fb_info);
event.info = fb_info;
+ console_lock();
fb_notifier_call_chain(FB_EVENT_FB_UNREGISTERED, &event);
+ console_unlock();
/* this may free fb info */
put_fb_info(fb_info);
@@ -1831,11 +1837,8 @@ int fb_new_modelist(struct fb_info *info)
err = 1;
if (!list_empty(&info->modelist)) {
- if (!lock_fb_info(info))
- return -ENODEV;
event.info = info;
err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
- unlock_fb_info(info);
}
return err;
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index 67afa9c..303fb9f 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -175,6 +175,8 @@ static ssize_t store_modes(struct device *device,
if (i * sizeof(struct fb_videomode) != count)
return -EINVAL;
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
console_lock();
list_splice(&fb_info->modelist, &old_list);
fb_videomode_to_modelist((const struct fb_videomode *)buf, i,
@@ -186,6 +188,7 @@ static ssize_t store_modes(struct device *device,
fb_destroy_modelist(&old_list);
console_unlock();
+ unlock_fb_info(fb_info);
return 0;
}
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index dbc13e9..c93d59e 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -269,6 +269,14 @@ static int evtchn_bind_to_user(struct per_user_data *u, int port)
u->name, (void *)(unsigned long)port);
if (rc >= 0)
rc = 0;
+ else {
+ /* bind failed, should close the port now */
+ struct evtchn_close close;
+ close.port = port;
+ if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0)
+ BUG();
+ set_port_user(port, NULL);
+ }
return rc;
}
@@ -277,6 +285,8 @@ static void evtchn_unbind_from_user(struct per_user_data *u, int port)
{
int irq = irq_from_evtchn(port);
+ BUG_ON(irq < 0);
+
unbind_from_irqhandler(irq, (void *)(unsigned long)port);
set_port_user(port, NULL);
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 63616d7..d07c4cd 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -8,6 +8,7 @@
#include <linux/bitops.h>
#include <xen/events.h>
#include <linux/sched.h>
+#include <linux/ratelimit.h>
#include "pciback.h"
int verbose_request;
@@ -135,7 +136,6 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev,
struct pci_dev *dev, struct xen_pci_op *op)
{
struct xen_pcibk_dev_data *dev_data;
- int otherend = pdev->xdev->otherend_id;
int status;
if (unlikely(verbose_request))
@@ -144,8 +144,9 @@ int xen_pcibk_enable_msi(struct xen_pcibk_device *pdev,
status = pci_enable_msi(dev);
if (status) {
- printk(KERN_ERR "error enable msi for guest %x status %x\n",
- otherend, status);
+ pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI for guest %u: err %d\n",
+ pci_name(dev), pdev->xdev->otherend_id,
+ status);
op->value = 0;
return XEN_PCI_ERR_op_failed;
}
@@ -223,10 +224,10 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
pci_name(dev), i,
op->msix_entries[i].vector);
}
- } else {
- printk(KERN_WARNING DRV_NAME ": %s: failed to enable MSI-X: err %d!\n",
- pci_name(dev), result);
- }
+ } else
+ pr_warn_ratelimited(DRV_NAME ": %s: error enabling MSI-X for guest %u: err %d!\n",
+ pci_name(dev), pdev->xdev->otherend_id,
+ result);
kfree(entries);
op->value = result;
diff --git a/fs/binfmt_em86.c b/fs/binfmt_em86.c
index b8e8b0a..4a1b984 100644
--- a/fs/binfmt_em86.c
+++ b/fs/binfmt_em86.c
@@ -42,7 +42,6 @@ static int load_em86(struct linux_binprm *bprm,struct pt_regs *regs)
return -ENOEXEC;
}
- bprm->recursion_depth++; /* Well, the bang-shell is implicit... */
allow_write_access(bprm->file);
fput(bprm->file);
bprm->file = NULL;
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index ca52e92..7423cb9 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -116,10 +116,6 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
if (!enabled)
goto _ret;
- retval = -ENOEXEC;
- if (bprm->recursion_depth > BINPRM_MAX_RECURSION)
- goto _ret;
-
/* to keep locking time low, we copy the interpreter string */
read_lock(&entries_lock);
fmt = check_file(bprm);
@@ -199,8 +195,6 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
if (retval < 0)
goto _error;
- bprm->recursion_depth++;
-
retval = search_binary_handler (bprm, regs);
if (retval < 0)
goto _error;
diff --git a/fs/binfmt_script.c b/fs/binfmt_script.c
index e39c18a..211ede0 100644
--- a/fs/binfmt_script.c
+++ b/fs/binfmt_script.c
@@ -22,15 +22,13 @@ static int load_script(struct linux_binprm *bprm,struct pt_regs *regs)
char interp[BINPRM_BUF_SIZE];
int retval;
- if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!') ||
- (bprm->recursion_depth > BINPRM_MAX_RECURSION))
+ if ((bprm->buf[0] != '#') || (bprm->buf[1] != '!'))
return -ENOEXEC;
/*
* This section does the #! interpretation.
* Sorta complicated, but hopefully it will work. -TYT
*/
- bprm->recursion_depth++;
allow_write_access(bprm->file);
fput(bprm->file);
bprm->file = NULL;
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 9b98987..613edd8 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -82,13 +82,14 @@ sector_t blkdev_max_block(struct block_device *bdev)
}
/* Kill _all_ buffers and pagecache , dirty or not.. */
-static void kill_bdev(struct block_device *bdev)
+void kill_bdev(struct block_device *bdev)
{
if (bdev->bd_inode->i_mapping->nrpages == 0)
return;
invalidate_bh_lrus();
truncate_inode_pages(bdev->bd_inode->i_mapping, 0);
}
+EXPORT_SYMBOL(kill_bdev);
int set_blocksize(struct block_device *bdev, int size)
{
@@ -1024,6 +1025,7 @@ int revalidate_disk(struct gendisk *disk)
mutex_lock(&bdev->bd_mutex);
check_disk_size_change(disk, bdev);
+ bdev->bd_invalidated = 0;
mutex_unlock(&bdev->bd_mutex);
bdput(bdev);
return ret;
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 0e3c092..b4d2438 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -918,7 +918,7 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page)
* own time */
dget(object->backer);
mntget(cache->mnt);
- file = dentry_open(object->backer, cache->mnt, O_RDWR,
+ file = dentry_open(object->backer, cache->mnt, O_RDWR | O_LARGEFILE,
cache->cache_cred);
if (IS_ERR(file)) {
ret = PTR_ERR(file);
diff --git a/fs/direct-io.c b/fs/direct-io.c
index d740ab6..ac401d2 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -304,9 +304,9 @@ static ssize_t dio_complete(struct dio *dio, loff_t offset, ssize_t ret, bool is
dio->end_io(dio->iocb, offset, transferred,
dio->private, ret, is_async);
} else {
+ inode_dio_done(dio->inode);
if (is_async)
aio_complete(dio->iocb, ret, 0);
- inode_dio_done(dio->inode);
}
return ret;
diff --git a/fs/exec.c b/fs/exec.c
index c27fa0d..312e297 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1385,6 +1385,10 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
struct linux_binfmt *fmt;
pid_t old_pid;
+ /* This allows 4 levels of binfmt rewrites before failing hard. */
+ if (depth > 5)
+ return -ELOOP;
+
retval = security_bprm_check(bprm);
if (retval)
return retval;
@@ -1408,12 +1412,8 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
if (!try_module_get(fmt->module))
continue;
read_unlock(&binfmt_lock);
+ bprm->recursion_depth = depth + 1;
retval = fn(bprm, regs);
- /*
- * Restore the depth counter to its starting value
- * in this call, so we don't have to rely on every
- * load_binary function to restore it on return.
- */
bprm->recursion_depth = depth;
if (retval >= 0) {
if (depth == 0)
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index d6970f7..484ffee 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -420,11 +420,16 @@ static int ext4_has_free_clusters(struct ext4_sb_info *sbi,
free_clusters = percpu_counter_read_positive(fcc);
dirty_clusters = percpu_counter_read_positive(dcc);
- root_clusters = EXT4_B2C(sbi, ext4_r_blocks_count(sbi->s_es));
+
+ /*
+ * r_blocks_count should always be multiple of the cluster ratio so
+ * we are safe to do a plane bit shift only.
+ */
+ root_clusters = ext4_r_blocks_count(sbi->s_es) >> sbi->s_cluster_bits;
if (free_clusters - (nclusters + root_clusters + dirty_clusters) <
EXT4_FREECLUSTERS_WATERMARK) {
- free_clusters = EXT4_C2B(sbi, percpu_counter_sum_positive(fcc));
+ free_clusters = percpu_counter_sum_positive(fcc);
dirty_clusters = percpu_counter_sum_positive(dcc);
}
/* Check whether we have space after accounting for current
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index fbb92e6..b48e0dc 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -45,6 +45,17 @@
#include <trace/events/ext4.h>
+/*
+ * used by extent splitting.
+ */
+#define EXT4_EXT_MAY_ZEROOUT 0x1 /* safe to zeroout if split fails \
+ due to ENOSPC */
+#define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */
+#define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */
+
+#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
+#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
+
static int ext4_split_extent(handle_t *handle,
struct inode *inode,
struct ext4_ext_path *path,
@@ -52,6 +63,13 @@ static int ext4_split_extent(handle_t *handle,
int split_flag,
int flags);
+static int ext4_split_extent_at(handle_t *handle,
+ struct inode *inode,
+ struct ext4_ext_path *path,
+ ext4_lblk_t split,
+ int split_flag,
+ int flags);
+
static int ext4_ext_truncate_extend_restart(handle_t *handle,
struct inode *inode,
int needed)
@@ -636,6 +654,7 @@ ext4_ext_find_extent(struct inode *inode, ext4_lblk_t block,
struct ext4_extent_header *eh;
struct buffer_head *bh;
short int depth, i, ppos = 0, alloc = 0;
+ int ret;
eh = ext_inode_hdr(inode);
depth = ext_depth(inode);
@@ -665,12 +684,15 @@ ext4_ext_find_extent(struct inode *inode, ext4_lblk_t block,
path[ppos].p_ext = NULL;
bh = sb_getblk(inode->i_sb, path[ppos].p_block);
- if (unlikely(!bh))
+ if (unlikely(!bh)) {
+ ret = -ENOMEM;
goto err;
+ }
if (!bh_uptodate_or_lock(bh)) {
trace_ext4_ext_load_extent(inode, block,
path[ppos].p_block);
- if (bh_submit_read(bh) < 0) {
+ ret = bh_submit_read(bh);
+ if (ret < 0) {
put_bh(bh);
goto err;
}
@@ -683,13 +705,15 @@ ext4_ext_find_extent(struct inode *inode, ext4_lblk_t block,
put_bh(bh);
EXT4_ERROR_INODE(inode,
"ppos %d > depth %d", ppos, depth);
+ ret = -EIO;
goto err;
}
path[ppos].p_bh = bh;
path[ppos].p_hdr = eh;
i--;
- if (need_to_validate && ext4_ext_check(inode, eh, i))
+ ret = need_to_validate ? ext4_ext_check(inode, eh, i) : 0;
+ if (ret < 0)
goto err;
}
@@ -711,7 +735,7 @@ err:
ext4_ext_drop_refs(path);
if (alloc)
kfree(path);
- return ERR_PTR(-EIO);
+ return ERR_PTR(ret);
}
/*
@@ -866,7 +890,7 @@ static int ext4_ext_split(handle_t *handle, struct inode *inode,
}
bh = sb_getblk(inode->i_sb, newblock);
if (!bh) {
- err = -EIO;
+ err = -ENOMEM;
goto cleanup;
}
lock_buffer(bh);
@@ -938,7 +962,7 @@ static int ext4_ext_split(handle_t *handle, struct inode *inode,
newblock = ablocks[--a];
bh = sb_getblk(inode->i_sb, newblock);
if (!bh) {
- err = -EIO;
+ err = -ENOMEM;
goto cleanup;
}
lock_buffer(bh);
@@ -1049,11 +1073,8 @@ static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
return err;
bh = sb_getblk(inode->i_sb, newblock);
- if (!bh) {
- err = -EIO;
- ext4_std_error(inode->i_sb, err);
- return err;
- }
+ if (!bh)
+ return -ENOMEM;
lock_buffer(bh);
err = ext4_journal_get_create_access(handle, bh);
@@ -2321,7 +2342,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
struct ext4_extent *ex;
/* the header must be checked already in ext4_ext_remove_space() */
- ext_debug("truncate since %u in leaf\n", start);
+ ext_debug("truncate since %u in leaf to %u\n", start, end);
if (!path[depth].p_hdr)
path[depth].p_hdr = ext_block_hdr(path[depth].p_bh);
eh = path[depth].p_hdr;
@@ -2356,7 +2377,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
ext_debug(" border %u:%u\n", a, b);
/* If this extent is beyond the end of the hole, skip it */
- if (end <= ex_ee_block) {
+ if (end < ex_ee_block) {
ex--;
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
@@ -2495,16 +2516,17 @@ ext4_ext_more_to_rm(struct ext4_ext_path *path)
return 1;
}
-static int ext4_ext_remove_space(struct inode *inode, ext4_lblk_t start)
+static int ext4_ext_remove_space(struct inode *inode, ext4_lblk_t start,
+ ext4_lblk_t end)
{
struct super_block *sb = inode->i_sb;
int depth = ext_depth(inode);
- struct ext4_ext_path *path;
+ struct ext4_ext_path *path = NULL;
ext4_fsblk_t partial_cluster = 0;
handle_t *handle;
- int i, err;
+ int i = 0, err;
- ext_debug("truncate since %u\n", start);
+ ext_debug("truncate since %u to %u\n", start, end);
/* probably first extent we're gonna free will be last in block */
handle = ext4_journal_start(inode, depth + 1);
@@ -2517,29 +2539,96 @@ again:
trace_ext4_ext_remove_space(inode, start, depth);
/*
+ * Check if we are removing extents inside the extent tree. If that
+ * is the case, we are going to punch a hole inside the extent tree
+ * so we have to check whether we need to split the extent covering
+ * the last block to remove so we can easily remove the part of it
+ * in ext4_ext_rm_leaf().
+ */
+ if (end < EXT_MAX_BLOCKS - 1) {
+ struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+
+ /* find extent for this block */
+ path = ext4_ext_find_extent(inode, end, NULL);
+ if (IS_ERR(path)) {
+ ext4_journal_stop(handle);
+ return PTR_ERR(path);
+ }
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ if (!ex) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ path = NULL;
+ goto cont;
+ }
+
+ ee_block = le32_to_cpu(ex->ee_block);
+
+ /*
+ * See if the last block is inside the extent, if so split
+ * the extent at 'end' block so we can easily remove the
+ * tail of the first part of the split extent in
+ * ext4_ext_rm_leaf().
+ */
+ if (end >= ee_block &&
+ end < ee_block + ext4_ext_get_actual_len(ex) - 1) {
+ int split_flag = 0;
+
+ if (ext4_ext_is_uninitialized(ex))
+ split_flag = EXT4_EXT_MARK_UNINIT1 |
+ EXT4_EXT_MARK_UNINIT2;
+
+ /*
+ * Split the extent in two so that 'end' is the last
+ * block in the first new extent
+ */
+ err = ext4_split_extent_at(handle, inode, path,
+ end + 1, split_flag,
+ EXT4_GET_BLOCKS_PRE_IO |
+ EXT4_GET_BLOCKS_PUNCH_OUT_EXT);
+
+ if (err < 0)
+ goto out;
+ }
+ }
+cont:
+
+ /*
* We start scanning from right side, freeing all the blocks
* after i_size and walking into the tree depth-wise.
*/
depth = ext_depth(inode);
- path = kzalloc(sizeof(struct ext4_ext_path) * (depth + 1), GFP_NOFS);
- if (path == NULL) {
- ext4_journal_stop(handle);
- return -ENOMEM;
- }
- path[0].p_depth = depth;
- path[0].p_hdr = ext_inode_hdr(inode);
- if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
- err = -EIO;
- goto out;
+ if (path) {
+ int k = i = depth;
+ while (--k > 0)
+ path[k].p_block =
+ le16_to_cpu(path[k].p_hdr->eh_entries)+1;
+ } else {
+ path = kzalloc(sizeof(struct ext4_ext_path) * (depth + 1),
+ GFP_NOFS);
+ if (path == NULL) {
+ ext4_journal_stop(handle);
+ return -ENOMEM;
+ }
+ path[0].p_depth = depth;
+ path[0].p_hdr = ext_inode_hdr(inode);
+ i = 0;
+
+ if (ext4_ext_check(inode, path[0].p_hdr, depth)) {
+ err = -EIO;
+ goto out;
+ }
}
- i = err = 0;
+ err = 0;
while (i >= 0 && err == 0) {
if (i == depth) {
/* this is leaf block */
err = ext4_ext_rm_leaf(handle, inode, path,
&partial_cluster, start,
- EXT_MAX_BLOCKS - 1);
+ end);
/* root level has p_bh == NULL, brelse() eats this */
brelse(path[i].p_bh);
path[i].p_bh = NULL;
@@ -2646,8 +2735,10 @@ again:
out:
ext4_ext_drop_refs(path);
kfree(path);
- if (err == -EAGAIN)
+ if (err == -EAGAIN) {
+ path = NULL;
goto again;
+ }
ext4_journal_stop(handle);
return err;
@@ -2722,17 +2813,6 @@ static int ext4_ext_zeroout(struct inode *inode, struct ext4_extent *ex)
}
/*
- * used by extent splitting.
- */
-#define EXT4_EXT_MAY_ZEROOUT 0x1 /* safe to zeroout if split fails \
- due to ENOSPC */
-#define EXT4_EXT_MARK_UNINIT1 0x2 /* mark first half uninitialized */
-#define EXT4_EXT_MARK_UNINIT2 0x4 /* mark second half uninitialized */
-
-#define EXT4_EXT_DATA_VALID1 0x8 /* first half contains valid data */
-#define EXT4_EXT_DATA_VALID2 0x10 /* second half contains valid data */
-
-/*
* ext4_split_extent_at() splits an extent at given block.
*
* @handle: the journal handle
@@ -4274,7 +4354,7 @@ void ext4_ext_truncate(struct inode *inode)
last_block = (inode->i_size + sb->s_blocksize - 1)
>> EXT4_BLOCK_SIZE_BITS(sb);
- err = ext4_ext_remove_space(inode, last_block);
+ err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCKS - 1);
/* In a multi-transaction truncate, we only make the final
* transaction synchronous.
@@ -4751,14 +4831,12 @@ int ext4_ext_punch_hole(struct file *file, loff_t offset, loff_t length)
{
struct inode *inode = file->f_path.dentry->d_inode;
struct super_block *sb = inode->i_sb;
- struct ext4_ext_cache cache_ex;
- ext4_lblk_t first_block, last_block, num_blocks, iblock, max_blocks;
+ ext4_lblk_t first_block, stop_block;
struct address_space *mapping = inode->i_mapping;
- struct ext4_map_blocks map;
handle_t *handle;
loff_t first_page, last_page, page_len;
loff_t first_page_offset, last_page_offset;
- int ret, credits, blocks_released, err = 0;
+ int credits, err = 0;
/* No need to punch hole beyond i_size */
if (offset >= inode->i_size)
@@ -4774,10 +4852,6 @@ int ext4_ext_punch_hole(struct file *file, loff_t offset, loff_t length)
offset;
}
- first_block = (offset + sb->s_blocksize - 1) >>
- EXT4_BLOCK_SIZE_BITS(sb);
- last_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
-
first_page = (offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
last_page = (offset + length) >> PAGE_CACHE_SHIFT;
@@ -4856,7 +4930,6 @@ int ext4_ext_punch_hole(struct file *file, loff_t offset, loff_t length)
}
}
-
/*
* If i_size is contained in the last page, we need to
* unmap and zero the partial page after i_size
@@ -4876,73 +4949,22 @@ int ext4_ext_punch_hole(struct file *file, loff_t offset, loff_t length)
}
}
+ first_block = (offset + sb->s_blocksize - 1) >>
+ EXT4_BLOCK_SIZE_BITS(sb);
+ stop_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
+
/* If there are no blocks to remove, return now */
- if (first_block >= last_block)
+ if (first_block >= stop_block)
goto out;
down_write(&EXT4_I(inode)->i_data_sem);
ext4_ext_invalidate_cache(inode);
ext4_discard_preallocations(inode);
- /*
- * Loop over all the blocks and identify blocks
- * that need to be punched out
- */
- iblock = first_block;
- blocks_released = 0;
- while (iblock < last_block) {
- max_blocks = last_block - iblock;
- num_blocks = 1;
- memset(&map, 0, sizeof(map));
- map.m_lblk = iblock;
- map.m_len = max_blocks;
- ret = ext4_ext_map_blocks(handle, inode, &map,
- EXT4_GET_BLOCKS_PUNCH_OUT_EXT);
-
- if (ret > 0) {
- blocks_released += ret;
- num_blocks = ret;
- } else if (ret == 0) {
- /*
- * If map blocks could not find the block,
- * then it is in a hole. If the hole was
- * not already cached, then map blocks should
- * put it in the cache. So we can get the hole
- * out of the cache
- */
- memset(&cache_ex, 0, sizeof(cache_ex));
- if ((ext4_ext_check_cache(inode, iblock, &cache_ex)) &&
- !cache_ex.ec_start) {
-
- /* The hole is cached */
- num_blocks = cache_ex.ec_block +
- cache_ex.ec_len - iblock;
+ err = ext4_ext_remove_space(inode, first_block, stop_block - 1);
- } else {
- /* The block could not be identified */
- err = -EIO;
- break;
- }
- } else {
- /* Map blocks error */
- err = ret;
- break;
- }
-
- if (num_blocks == 0) {
- /* This condition should never happen */
- ext_debug("Block lookup failed");
- err = -EIO;
- break;
- }
-
- iblock += num_blocks;
- }
-
- if (blocks_released > 0) {
- ext4_ext_invalidate_cache(inode);
- ext4_discard_preallocations(inode);
- }
+ ext4_ext_invalidate_cache(inode);
+ ext4_discard_preallocations(inode);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
index 3cfc73f..26d6dbf 100644
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -146,6 +146,7 @@ static Indirect *ext4_get_branch(struct inode *inode, int depth,
struct super_block *sb = inode->i_sb;
Indirect *p = chain;
struct buffer_head *bh;
+ int ret = -EIO;
*err = 0;
/* i_data is not going away, no lock needed */
@@ -154,8 +155,10 @@ static Indirect *ext4_get_branch(struct inode *inode, int depth,
goto no_block;
while (--depth) {
bh = sb_getblk(sb, le32_to_cpu(p->key));
- if (unlikely(!bh))
+ if (unlikely(!bh)) {
+ ret = -ENOMEM;
goto failure;
+ }
if (!bh_uptodate_or_lock(bh)) {
if (bh_submit_read(bh) < 0) {
@@ -177,7 +180,7 @@ static Indirect *ext4_get_branch(struct inode *inode, int depth,
return NULL;
failure:
- *err = -EIO;
+ *err = ret;
no_block:
return p;
}
@@ -471,7 +474,7 @@ static int ext4_alloc_branch(handle_t *handle, struct inode *inode,
*/
bh = sb_getblk(inode->i_sb, new_blocks[n-1]);
if (unlikely(!bh)) {
- err = -EIO;
+ err = -ENOMEM;
goto failed;
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8424dda..4b2bb75 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -661,7 +661,7 @@ struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode,
bh = sb_getblk(inode->i_sb, map.m_pblk);
if (!bh) {
- *errp = -EIO;
+ *errp = -ENOMEM;
return NULL;
}
if (map.m_flags & EXT4_MAP_NEW) {
@@ -2795,9 +2795,9 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
ext4_free_io_end(io_end);
out:
+ inode_dio_done(inode);
if (is_async)
aio_complete(iocb, ret, 0);
- inode_dio_done(inode);
return;
}
@@ -3575,11 +3575,8 @@ static int __ext4_get_inode_loc(struct inode *inode,
iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb);
bh = sb_getblk(sb, block);
- if (!bh) {
- EXT4_ERROR_INODE_BLOCK(inode, block,
- "unable to read itable block");
- return -EIO;
- }
+ if (!bh)
+ return -ENOMEM;
if (!buffer_uptodate(bh)) {
lock_buffer(bh);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 1d07c12..553ff71 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4178,7 +4178,7 @@ static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
/* The max size of hash table is PREALLOC_TB_SIZE */
order = PREALLOC_TB_SIZE - 1;
/* Add the prealloc space to lg */
- rcu_read_lock();
+ spin_lock(&lg->lg_prealloc_lock);
list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
pa_inode_list) {
spin_lock(&tmp_pa->pa_lock);
@@ -4202,12 +4202,12 @@ static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac)
if (!added)
list_add_tail_rcu(&pa->pa_inode_list,
&lg->lg_prealloc_list[order]);
- rcu_read_unlock();
+ spin_unlock(&lg->lg_prealloc_lock);
/* Now trim the list to be not more than 8 elements */
if (lg_prealloc_count > 8) {
ext4_mb_discard_lg_preallocations(sb, lg,
- order, lg_prealloc_count);
+ order, lg_prealloc_count);
return;
}
return ;
diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c
index 7ea4ba4..f3358ab 100644
--- a/fs/ext4/mmp.c
+++ b/fs/ext4/mmp.c
@@ -41,6 +41,8 @@ static int read_mmp_block(struct super_block *sb, struct buffer_head **bh,
* is not blocked in the elevator. */
if (!*bh)
*bh = sb_getblk(sb, mmp_block);
+ if (!*bh)
+ return -ENOMEM;
if (*bh) {
get_bh(*bh);
lock_buffer(*bh);
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 24feb1c..54f566d 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -108,14 +108,13 @@ int ext4_end_io_nolock(ext4_io_end_t *io)
inode->i_ino, offset, size, ret);
}
- if (io->iocb)
- aio_complete(io->iocb, io->result, 0);
-
- if (io->flag & EXT4_IO_END_DIRECT)
- inode_dio_done(inode);
/* Wake up anyone waiting on unwritten extent conversion */
if (atomic_dec_and_test(&EXT4_I(inode)->i_aiodio_unwritten))
wake_up_all(ext4_ioend_wq(io->inode));
+ if (io->flag & EXT4_IO_END_DIRECT)
+ inode_dio_done(inode);
+ if (io->iocb)
+ aio_complete(io->iocb, io->result, 0);
return ret;
}
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 4eac337..33129c0 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -142,7 +142,7 @@ static struct buffer_head *bclean(handle_t *handle, struct super_block *sb,
bh = sb_getblk(sb, blk);
if (!bh)
- return ERR_PTR(-EIO);
+ return ERR_PTR(-ENOMEM);
if ((err = ext4_journal_get_write_access(handle, bh))) {
brelse(bh);
bh = ERR_PTR(err);
@@ -220,7 +220,7 @@ static int setup_new_group_blocks(struct super_block *sb,
gdb = sb_getblk(sb, block);
if (!gdb) {
- err = -EIO;
+ err = -ENOMEM;
goto exit_journal;
}
if ((err = ext4_journal_get_write_access(handle, gdb))) {
@@ -694,7 +694,7 @@ static void update_backups(struct super_block *sb,
bh = sb_getblk(sb, group * bpg + blk_off);
if (!bh) {
- err = -EIO;
+ err = -ENOMEM;
break;
}
ext4_debug("update metadata backup %#04lx\n",
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 4410ae7..d5498b2 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -496,7 +496,7 @@ ext4_xattr_release_block(handle_t *handle, struct inode *inode,
error = ext4_handle_dirty_metadata(handle, inode, bh);
if (IS_SYNC(inode))
ext4_handle_sync(handle);
- dquot_free_block(inode, 1);
+ dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
ea_bdebug(bh, "refcount now=%d; releasing",
le32_to_cpu(BHDR(bh)->h_refcount));
}
@@ -785,7 +785,8 @@ inserted:
else {
/* The old block is released after updating
the inode. */
- error = dquot_alloc_block(inode, 1);
+ error = dquot_alloc_block(inode,
+ EXT4_C2B(EXT4_SB(sb), 1));
if (error)
goto cleanup;
error = ext4_journal_get_write_access(handle,
@@ -839,16 +840,17 @@ inserted:
new_bh = sb_getblk(sb, block);
if (!new_bh) {
+ error = -ENOMEM;
getblk_failed:
ext4_free_blocks(handle, inode, NULL, block, 1,
EXT4_FREE_BLOCKS_METADATA);
- error = -EIO;
goto cleanup;
}
lock_buffer(new_bh);
error = ext4_journal_get_create_access(handle, new_bh);
if (error) {
unlock_buffer(new_bh);
+ error = -EIO;
goto getblk_failed;
}
memcpy(new_bh->b_data, s->base, new_bh->b_size);
@@ -880,7 +882,7 @@ cleanup:
return error;
cleanup_dquot:
- dquot_free_block(inode, 1);
+ dquot_free_block(inode, EXT4_C2B(EXT4_SB(sb), 1));
goto cleanup;
bad_block:
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 8392cb8..a3a0987 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -551,6 +551,9 @@ again:
status = nlmclnt_block(block, req, NLMCLNT_POLL_TIMEOUT);
if (status < 0)
break;
+ /* Resend the blocking lock request after a server reboot */
+ if (resp->status == nlm_lck_denied_grace_period)
+ continue;
if (resp->status != nlm_lck_blocked)
break;
}
diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c
index 1aaa0ee..b17a81c 100644
--- a/fs/nfs/blocklayout/blocklayout.c
+++ b/fs/nfs/blocklayout/blocklayout.c
@@ -1101,6 +1101,7 @@ static const struct nfs_pageio_ops bl_pg_write_ops = {
static struct pnfs_layoutdriver_type blocklayout_type = {
.id = LAYOUT_BLOCK_VOLUME,
.name = "LAYOUT_BLOCK_VOLUME",
+ .owner = THIS_MODULE,
.read_pagelist = bl_read_pagelist,
.write_pagelist = bl_write_pagelist,
.alloc_layout_hdr = bl_alloc_layout_hdr,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 2f98c53..6d7c53d 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -5891,7 +5891,8 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp, gfp_t gfp_flags)
status = nfs4_wait_for_completion_rpc_task(task);
if (status == 0)
status = task->tk_status;
- if (status == 0)
+ /* if layoutp->len is 0, nfs4_layoutget_prepare called rpc_exit */
+ if (status == 0 && lgp->res.layoutp->len)
status = pnfs_layout_process(lgp);
rpc_put_task(task);
dprintk("<-- %s status=%d\n", __func__, status);
diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c
index a03ee52..c1897f7 100644
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -569,6 +569,7 @@ static struct pnfs_layoutdriver_type objlayout_type = {
.flags = PNFS_LAYOUTRET_ON_SETATTR |
PNFS_LAYOUTRET_ON_ERROR,
+ .owner = THIS_MODULE,
.alloc_layout_hdr = objlayout_alloc_layout_hdr,
.free_layout_hdr = objlayout_free_layout_hdr,
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 8b197d2..7d189dc 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1009,6 +1009,8 @@ free_client(struct nfs4_client *clp)
put_group_info(clp->cl_cred.cr_group_info);
kfree(clp->cl_principal);
kfree(clp->cl_name.data);
+ idr_remove_all(&clp->cl_stateids);
+ idr_destroy(&clp->cl_stateids);
kfree(clp);
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 8445fbc..6f292dd 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -579,8 +579,6 @@ static int inotify_update_existing_watch(struct fsnotify_group *group,
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!(mask & IN_ALL_EVENTS)))
- return -EINVAL;
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark)
@@ -632,8 +630,6 @@ static int inotify_new_watch(struct fsnotify_group *group,
/* don't allow invalid bits: we don't want flags set */
mask = inotify_arg_to_mask(arg);
- if (unlikely(!(mask & IN_ALL_EVENTS)))
- return -EINVAL;
tmp_i_mark = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
if (unlikely(!tmp_i_mark))
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 78b68af..4402b18 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -593,9 +593,9 @@ static void ocfs2_dio_end_io(struct kiocb *iocb,
level = ocfs2_iocb_rw_locked_level(iocb);
ocfs2_rw_unlock(inode, level);
+ inode_dio_done(inode);
if (is_async)
aio_complete(iocb, ret, 0);
- inode_dio_done(inode);
}
/*
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 81a4cd2..231eab2 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2545,6 +2545,7 @@ int ocfs2_super_lock(struct ocfs2_super *osb,
* everything is up to the caller :) */
status = ocfs2_should_refresh_lock_res(lockres);
if (status < 0) {
+ ocfs2_cluster_unlock(osb, lockres, level);
mlog_errno(status);
goto bail;
}
@@ -2553,8 +2554,10 @@ int ocfs2_super_lock(struct ocfs2_super *osb,
ocfs2_complete_lock_res_refresh(lockres, status);
- if (status < 0)
+ if (status < 0) {
+ ocfs2_cluster_unlock(osb, lockres, level);
mlog_errno(status);
+ }
ocfs2_track_lock_refresh(lockres);
}
bail:
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index f169da4..b7e74b5 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -642,7 +642,7 @@ ocfs2_block_group_alloc_discontig(handle_t *handle,
* cluster groups will be staying in cache for the duration of
* this operation.
*/
- ac->ac_allow_chain_relink = 0;
+ ac->ac_disable_chain_relink = 1;
/* Claim the first region */
status = ocfs2_block_group_claim_bits(osb, handle, ac, min_bits,
@@ -1823,7 +1823,7 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
* Do this *after* figuring out how many bits we're taking out
* of our target group.
*/
- if (ac->ac_allow_chain_relink &&
+ if (!ac->ac_disable_chain_relink &&
(prev_group_bh) &&
(ocfs2_block_group_reasonably_empty(bg, res->sr_bits))) {
status = ocfs2_relink_block_group(handle, alloc_inode,
@@ -1928,7 +1928,6 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
victim = ocfs2_find_victim_chain(cl);
ac->ac_chain = victim;
- ac->ac_allow_chain_relink = 1;
status = ocfs2_search_chain(ac, handle, bits_wanted, min_bits,
res, &bits_left);
@@ -1947,7 +1946,7 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
* searching each chain in order. Don't allow chain relinking
* because we only calculate enough journal credits for one
* relink per alloc. */
- ac->ac_allow_chain_relink = 0;
+ ac->ac_disable_chain_relink = 1;
for (i = 0; i < le16_to_cpu(cl->cl_next_free_rec); i ++) {
if (i == victim)
continue;
diff --git a/fs/ocfs2/suballoc.h b/fs/ocfs2/suballoc.h
index b8afabf..a36d0aa 100644
--- a/fs/ocfs2/suballoc.h
+++ b/fs/ocfs2/suballoc.h
@@ -49,7 +49,7 @@ struct ocfs2_alloc_context {
/* these are used by the chain search */
u16 ac_chain;
- int ac_allow_chain_relink;
+ int ac_disable_chain_relink;
group_search_t *ac_group_search;
u64 ac_last_group;
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index aa9e877..0d5ea9c 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -7189,7 +7189,7 @@ int ocfs2_init_security_and_acl(struct inode *dir,
struct buffer_head *dir_bh = NULL;
ret = ocfs2_init_security_get(inode, dir, qstr, NULL);
- if (!ret) {
+ if (ret) {
mlog_errno(ret);
goto leave;
}
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 6b5fcc5..1ef15cc 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -399,11 +399,11 @@ void delete_partition(struct gendisk *disk, int partno)
if (!part)
return;
- blk_free_devt(part_devt(part));
rcu_assign_pointer(ptbl->part[partno], NULL);
rcu_assign_pointer(ptbl->last_lookup, NULL);
kobject_put(part->holder_dir);
device_del(part_to_dev(part));
+ blk_free_devt(part_devt(part));
hd_struct_put(part);
}
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 57bbf90..45d18d1 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -72,6 +72,27 @@ static char *reason_str[] = {
"Oops", "Panic", "Kexec", "Restart", "Halt", "Poweroff", "Emergency"
};
+bool pstore_cannot_block_path(enum kmsg_dump_reason reason)
+{
+ /*
+ * In case of NMI path, pstore shouldn't be blocked
+ * regardless of reason.
+ */
+ if (in_nmi())
+ return true;
+
+ switch (reason) {
+ /* In panic case, other cpus are stopped by smp_send_stop(). */
+ case KMSG_DUMP_PANIC:
+ /* Emergency restart shouldn't be blocked by spin lock. */
+ case KMSG_DUMP_EMERG:
+ return true;
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(pstore_cannot_block_path);
+
/*
* callback from kmsg_dump. (s2,l2) has the most recently
* written bytes, older bytes are in (s1,l1). Save as much
@@ -97,10 +118,12 @@ static void pstore_dump(struct kmsg_dumper *dumper,
else
why = "Unknown";
- if (in_nmi()) {
- is_locked = spin_trylock(&psinfo->buf_lock);
- if (!is_locked)
- pr_err("pstore dump routine blocked in NMI, may corrupt error record\n");
+ if (pstore_cannot_block_path(reason)) {
+ is_locked = spin_trylock_irqsave(&psinfo->buf_lock, flags);
+ if (!is_locked) {
+ pr_err("pstore dump routine blocked in %s path, may corrupt error record\n"
+ , in_nmi() ? "NMI" : why);
+ }
} else
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
@@ -131,9 +154,9 @@ static void pstore_dump(struct kmsg_dumper *dumper,
total += l1_cpy + l2_cpy;
part++;
}
- if (in_nmi()) {
+ if (pstore_cannot_block_path(reason)) {
if (is_locked)
- spin_unlock(&psinfo->buf_lock);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
} else
spin_unlock_irqrestore(&psinfo->buf_lock, flags);
}
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index c542c73..f9c90b5 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -130,13 +130,14 @@ void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum)
else if (inum > o->inum)
p = p->rb_right;
else {
- if (o->dnext) {
+ if (o->del) {
spin_unlock(&c->orphan_lock);
dbg_gen("deleted twice ino %lu",
(unsigned long)inum);
return;
}
if (o->cnext) {
+ o->del = 1;
o->dnext = c->orph_dnext;
c->orph_dnext = o;
spin_unlock(&c->orphan_lock);
@@ -447,6 +448,7 @@ static void erase_deleted(struct ubifs_info *c)
orphan = dnext;
dnext = orphan->dnext;
ubifs_assert(!orphan->new);
+ ubifs_assert(orphan->del);
rb_erase(&orphan->rb, &c->orph_tree);
list_del(&orphan->list);
c->tot_orphans -= 1;
@@ -536,6 +538,7 @@ static int insert_dead_orphan(struct ubifs_info *c, ino_t inum)
rb_link_node(&orphan->rb, parent, p);
rb_insert_color(&orphan->rb, &c->orph_tree);
list_add_tail(&orphan->list, &c->orph_list);
+ orphan->del = 1;
orphan->dnext = c->orph_dnext;
c->orph_dnext = orphan;
dbg_mnt("ino %lu, new %d, tot %d", (unsigned long)inum,
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 8bbc99e..a39fce5 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -908,6 +908,7 @@ struct ubifs_budget_req {
* @dnext: next orphan to delete
* @inum: inode number
* @new: %1 => added since the last commit, otherwise %0
+ * @del: %1 => delete pending, otherwise %0
*/
struct ubifs_orphan {
struct rb_node rb;
@@ -917,6 +918,7 @@ struct ubifs_orphan {
struct ubifs_orphan *dnext;
ino_t inum;
int new;
+ unsigned del:1;
};
/**
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index da64e15..6cdabb4 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -31,25 +31,16 @@
#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION
/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this. This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode 32 bit 64 bit
- * -------------------------
- * int 32 bit 32 bit
- * long 32 bit 64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
+ * The wait_queue_token (autofs_wqt_t) is part of a structure which is passed
+ * back to the kernel via ioctl from userspace. On architectures where 32- and
+ * 64-bit userspace binaries can be executed it's important that the size of
+ * autofs_wqt_t stays constant between 32- and 64-bit Linux kernels so that we
+ * do not break the binary ABI interface by changing the structure size.
*/
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
+#if defined(__ia64__) || defined(__alpha__) /* pure 64bit architectures */
typedef unsigned long autofs_wqt_t;
+#else
+typedef unsigned int autofs_wqt_t;
#endif
/* Packet types */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index f606406..acd8d4b 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -67,8 +67,6 @@ struct linux_binprm {
#define BINPRM_FLAGS_EXECFD_BIT 1
#define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT)
-#define BINPRM_MAX_RECURSION 4
-
/* Function parameter for binfmt->coredump */
struct coredump_params {
long signr;
diff --git a/include/linux/console.h b/include/linux/console.h
index 7453cfd..6ae6a15 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -77,7 +77,9 @@ extern const struct consw prom_con; /* SPARC PROM console */
int con_is_bound(const struct consw *csw);
int register_con_driver(const struct consw *csw, int first, int last);
int unregister_con_driver(const struct consw *csw);
+int do_unregister_con_driver(const struct consw *csw);
int take_over_console(const struct consw *sw, int first, int last, int deflt);
+int do_take_over_console(const struct consw *sw, int first, int last, int deflt);
void give_up_console(const struct consw *sw);
#ifdef CONFIG_HW_CONSOLE
int con_debug_enter(struct vc_data *vc);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 29b6353..a276817 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2103,6 +2103,7 @@ extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern void invalidate_bdev(struct block_device *);
extern int sync_blockdev(struct block_device *bdev);
+extern void kill_bdev(struct block_device *);
extern struct super_block *freeze_bdev(struct block_device *);
extern void emergency_thaw_all(void);
extern int thaw_bdev(struct block_device *bdev, struct super_block *sb);
@@ -2110,6 +2111,7 @@ extern int fsync_bdev(struct block_device *);
#else
static inline void bd_forget(struct inode *inode) {}
static inline int sync_blockdev(struct block_device *bdev) { return 0; }
+static inline void kill_bdev(struct block_device *bdev) {}
static inline void invalidate_bdev(struct block_device *bdev) {}
static inline struct super_block *freeze_bdev(struct block_device *sb)
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 255491c..52a9da2 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -152,4 +152,15 @@ void ida_simple_remove(struct ida *ida, unsigned int id);
void __init idr_init_cache(void);
+/**
+ * idr_for_each_entry - iterate over an idr's elements of a given type
+ * @idp: idr handle
+ * @entry: the type * to use as cursor
+ * @id: id entry's key
+ */
+#define idr_for_each_entry(idp, entry, id) \
+ for (id = 0, entry = (typeof(entry))idr_get_next((idp), &(id)); \
+ entry != NULL; \
+ ++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
+
#endif /* __IDR_H__ */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index b16f653..f8d4b27 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -54,6 +54,8 @@ enum umh_wait {
UMH_WAIT_PROC = 1, /* wait for the process to complete */
};
+#define UMH_KILLABLE 4 /* wait for EXEC/PROC killable */
+
struct subprocess_info {
struct work_struct work;
struct completion *complete;
diff --git a/include/linux/mmu_notifier.h b/include/linux/mmu_notifier.h
index 1d1b1e1..ee2baf0 100644
--- a/include/linux/mmu_notifier.h
+++ b/include/linux/mmu_notifier.h
@@ -4,6 +4,7 @@
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/mm_types.h>
+#include <linux/srcu.h>
struct mmu_notifier;
struct mmu_notifier_ops;
diff --git a/include/linux/pps_kernel.h b/include/linux/pps_kernel.h
index 9404854..ce2ab3d 100644
--- a/include/linux/pps_kernel.h
+++ b/include/linux/pps_kernel.h
@@ -43,7 +43,7 @@ struct pps_source_info {
int event, void *data); /* PPS echo function */
struct module *owner;
- struct device *dev;
+ struct device *dev; /* Parent device for device_create */
};
struct pps_event_time {
@@ -69,6 +69,7 @@ struct pps_device {
wait_queue_head_t queue; /* PPS event queue */
unsigned int id; /* PPS source unique ID */
+ void const *lookup_cookie; /* pps_lookup_dev only */
struct cdev cdev;
struct device *dev;
struct fasync_struct *async_queue; /* fasync method */
@@ -82,16 +83,26 @@ struct pps_device {
extern struct device_attribute pps_attrs[];
/*
+ * Internal functions.
+ *
+ * These are not actually part of the exported API, but this is a
+ * convenient header file to put them in.
+ */
+
+extern int pps_register_cdev(struct pps_device *pps);
+extern void pps_unregister_cdev(struct pps_device *pps);
+
+/*
* Exported functions
*/
extern struct pps_device *pps_register_source(
struct pps_source_info *info, int default_params);
extern void pps_unregister_source(struct pps_device *pps);
-extern int pps_register_cdev(struct pps_device *pps);
-extern void pps_unregister_cdev(struct pps_device *pps);
extern void pps_event(struct pps_device *pps,
struct pps_event_time *ts, int event, void *data);
+/* Look up a pps device by magic cookie */
+struct pps_device *pps_lookup_dev(void const *cookie);
static inline void timespec_to_pps_ktime(struct pps_ktime *kt,
struct timespec ts)
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index 2ca8cde..9b16969 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -22,6 +22,8 @@
#ifndef _LINUX_PSTORE_H
#define _LINUX_PSTORE_H
+#include <linux/kmsg_dump.h>
+
/* types */
enum pstore_type_id {
PSTORE_TYPE_DMESG = 0,
@@ -50,6 +52,7 @@ struct pstore_info {
#ifdef CONFIG_PSTORE
extern int pstore_register(struct pstore_info *);
+extern bool pstore_cannot_block_path(enum kmsg_dump_reason reason);
extern int pstore_write(enum pstore_type_id type, char *buf, size_t size);
#else
static inline int
@@ -57,6 +60,11 @@ pstore_register(struct pstore_info *psi)
{
return -ENODEV;
}
+static inline bool
+pstore_cannot_block_path(enum kmsg_dump_reason reason)
+{
+ return false;
+}
static inline int
pstore_write(enum pstore_type_id type, char *buf, size_t size)
{
diff --git a/include/linux/quota.h b/include/linux/quota.h
index cb78556..1162580 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -413,6 +413,7 @@ struct quota_module_name {
#define INIT_QUOTA_MODULE_NAMES {\
{QFMT_VFS_OLD, "quota_v1"},\
{QFMT_VFS_V0, "quota_v2"},\
+ {QFMT_VFS_V1, "quota_v2"},\
{0, NULL}}
#endif /* __KERNEL__ */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 8bec265..bae516e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -47,8 +47,8 @@
#define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
#define PORT_XR17D15X 21 /* Exar XR17D15x UART */
-#define PORT_BRCM_TRUMANAGE 22
-#define PORT_MAX_8250 22 /* max port ID */
+#define PORT_BRCM_TRUMANAGE 25
+#define PORT_MAX_8250 25 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index a54b825..6f8b026 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -384,14 +384,16 @@ static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_de
int protocol)
{
__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return desc->baSourceID[desc->bNrInPins + control_size];
+ return *(uac_processing_unit_bmControls(desc, protocol)
+ + control_size);
}
static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
int protocol)
{
__u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
- return &desc->baSourceID[desc->bNrInPins + control_size + 1];
+ return uac_processing_unit_bmControls(desc, protocol)
+ + control_size + 1;
}
/* 4.5.2 Class-Specific AS Interface Descriptor */
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index c2164fa..644921f 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -47,6 +47,7 @@ int con_set_cmap(unsigned char __user *cmap);
int con_get_cmap(unsigned char __user *cmap);
void scrollback(struct vc_data *vc, int lines);
void scrollfront(struct vc_data *vc, int lines);
+void clear_buffer_attributes(struct vc_data *vc);
void update_region(struct vc_data *vc, unsigned long start, int count);
void redraw_screen(struct vc_data *vc, int is_switch);
#define update_screen(x) redraw_screen(x, 0)
@@ -131,6 +132,8 @@ void vt_event_post(unsigned int event, unsigned int old, unsigned int new);
int vt_waitactive(int n);
void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
+extern int do_unbind_con_driver(const struct consw *csw, int first, int last,
+ int deflt);
extern int unbind_con_driver(const struct consw *csw, int first, int last,
int deflt);
int vty_init(const struct file_operations *console_fops);
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index e46674d..f9ce2fa 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -28,16 +28,16 @@
struct inet_hashinfo;
-/* I have no idea if this is a good hash for v6 or not. -DaveM */
static inline unsigned int inet6_ehashfn(struct net *net,
const struct in6_addr *laddr, const u16 lport,
const struct in6_addr *faddr, const __be16 fport)
{
- u32 ports = (lport ^ (__force u16)fport);
+ u32 ports = (((u32)lport) << 16) | (__force u32)fport;
return jhash_3words((__force u32)laddr->s6_addr32[3],
- (__force u32)faddr->s6_addr32[3],
- ports, inet_ehash_secret + net_hash_mix(net));
+ ipv6_addr_jhash(faddr),
+ ports,
+ inet_ehash_secret + net_hash_mix(net));
}
static inline int inet6_sk_ehashfn(const struct sock *sk)
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index f941964..ee4ee91 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -199,6 +199,7 @@ static inline void inet_sk_copy_descendant(struct sock *sk_to,
extern int inet_sk_rebuild_header(struct sock *sk);
extern u32 inet_ehash_secret;
+extern u32 ipv6_hash_secret;
extern void build_ehash_secret(void);
static inline unsigned int inet_ehashfn(struct net *net,
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index a366a8a..4d549cf 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -15,6 +15,7 @@
#include <linux/ipv6.h>
#include <linux/hardirq.h>
+#include <linux/jhash.h>
#include <net/if_inet6.h>
#include <net/ndisc.h>
#include <net/flow.h>
@@ -386,6 +387,17 @@ struct ip6_create_arg {
void ip6_frag_init(struct inet_frag_queue *q, void *a);
int ip6_frag_match(struct inet_frag_queue *q, void *a);
+/* more secured version of ipv6_addr_hash() */
+static inline u32 ipv6_addr_jhash(const struct in6_addr *a)
+{
+ u32 v = (__force u32)a->s6_addr32[0] ^ (__force u32)a->s6_addr32[1];
+
+ return jhash_3words(v,
+ (__force u32)a->s6_addr32[2],
+ (__force u32)a->s6_addr32[3],
+ ipv6_hash_secret);
+}
+
static inline int ipv6_addr_any(const struct in6_addr *a)
{
return (a->s6_addr32[0] | a->s6_addr32[1] |
diff --git a/include/target/target_core_device.h b/include/target/target_core_device.h
index 2be31ff..6f30e70 100644
--- a/include/target/target_core_device.h
+++ b/include/target/target_core_device.h
@@ -50,7 +50,7 @@ extern struct se_lun *core_dev_add_lun(struct se_portal_group *, struct se_hba *
extern int core_dev_del_lun(struct se_portal_group *, u32);
extern struct se_lun *core_get_lun_from_tpg(struct se_portal_group *, u32);
extern struct se_lun_acl *core_dev_init_initiator_node_lun_acl(struct se_portal_group *,
- u32, char *, int *);
+ struct se_node_acl *, u32, int *);
extern int core_dev_add_initiator_node_lun_acl(struct se_portal_group *,
struct se_lun_acl *, u32, u32);
extern int core_dev_del_initiator_node_lun_acl(struct se_portal_group *,
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index b6cacf1..c0739f8 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -361,12 +361,20 @@ static void __put_css_set(struct css_set *cg, int taskexit)
struct cgroup *cgrp = link->cgrp;
list_del(&link->cg_link_list);
list_del(&link->cgrp_link_list);
+
+ /*
+ * We may not be holding cgroup_mutex, and if cgrp->count is
+ * dropped to 0 the cgroup can be destroyed at any time, hence
+ * rcu_read_lock is used to keep it alive.
+ */
+ rcu_read_lock();
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
+ rcu_read_unlock();
kfree(link);
}
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 84a524b..835eee6 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2507,8 +2507,16 @@ void cpuset_print_task_mems_allowed(struct task_struct *tsk)
dentry = task_cs(tsk)->css.cgroup->dentry;
spin_lock(&cpuset_buffer_lock);
- snprintf(cpuset_name, CPUSET_NAME_LEN,
- dentry ? (const char *)dentry->d_name.name : "/");
+
+ if (!dentry) {
+ strcpy(cpuset_name, "/");
+ } else {
+ spin_lock(&dentry->d_lock);
+ strlcpy(cpuset_name, (const char *)dentry->d_name.name,
+ CPUSET_NAME_LEN);
+ spin_unlock(&dentry->d_lock);
+ }
+
nodelist_scnprintf(cpuset_nodelist, CPUSET_NODELIST_LEN,
tsk->mems_allowed);
printk(KERN_INFO "%s cpuset=%s mems_allowed=%s\n",
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 6db7a5e..cdd5607 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -640,21 +640,9 @@ static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
* and expiry check is done in the hrtimer_interrupt or in the softirq.
*/
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
- struct hrtimer_clock_base *base,
- int wakeup)
+ struct hrtimer_clock_base *base)
{
- if (base->cpu_base->hres_active && hrtimer_reprogram(timer, base)) {
- if (wakeup) {
- raw_spin_unlock(&base->cpu_base->lock);
- raise_softirq_irqoff(HRTIMER_SOFTIRQ);
- raw_spin_lock(&base->cpu_base->lock);
- } else
- __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
-
- return 1;
- }
-
- return 0;
+ return base->cpu_base->hres_active && hrtimer_reprogram(timer, base);
}
static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
@@ -735,8 +723,7 @@ static inline int hrtimer_switch_to_hres(void) { return 0; }
static inline void
hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
- struct hrtimer_clock_base *base,
- int wakeup)
+ struct hrtimer_clock_base *base)
{
return 0;
}
@@ -995,8 +982,21 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
*
* XXX send_remote_softirq() ?
*/
- if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases))
- hrtimer_enqueue_reprogram(timer, new_base, wakeup);
+ if (leftmost && new_base->cpu_base == &__get_cpu_var(hrtimer_bases)
+ && hrtimer_enqueue_reprogram(timer, new_base)) {
+ if (wakeup) {
+ /*
+ * We need to drop cpu_base->lock to avoid a
+ * lock ordering issue vs. rq->lock.
+ */
+ raw_spin_unlock(&new_base->cpu_base->lock);
+ raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+ local_irq_restore(flags);
+ return ret;
+ } else {
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+ }
+ }
unlock_hrtimer_base(timer, &flags);
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index dc813a9..63633a3 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -80,13 +80,11 @@ static int try_one_irq(int irq, struct irq_desc *desc, bool force)
/*
* All handlers must agree on IRQF_SHARED, so we test just the
- * first. Check for action->next as well.
+ * first.
*/
action = desc->action;
if (!action || !(action->flags & IRQF_SHARED) ||
- (action->flags & __IRQF_TIMER) ||
- (action->handler(irq, action->dev_id) == IRQ_HANDLED) ||
- !action->next)
+ (action->flags & __IRQF_TIMER))
goto out;
/* Already running on another processor */
@@ -104,6 +102,7 @@ static int try_one_irq(int irq, struct irq_desc *desc, bool force)
do {
if (handle_irq_event(desc) == IRQ_HANDLED)
ret = IRQ_HANDLED;
+ /* Make sure that there is still a valid action */
action = desc->action;
} while ((desc->istate & IRQS_PENDING) && action);
desc->istate &= ~IRQS_POLL_INPROGRESS;
diff --git a/kernel/kmod.c b/kernel/kmod.c
index a4bea97..d6fe08a 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -58,6 +58,43 @@ static DEFINE_SPINLOCK(umh_sysctl_lock);
*/
char modprobe_path[KMOD_PATH_LEN] = "/sbin/modprobe";
+static void free_modprobe_argv(struct subprocess_info *info)
+{
+ kfree(info->argv[3]); /* check call_modprobe() */
+ kfree(info->argv);
+}
+
+static int call_modprobe(char *module_name, int wait)
+{
+ static char *envp[] = {
+ "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL
+ };
+
+ char **argv = kmalloc(sizeof(char *[5]), GFP_KERNEL);
+ if (!argv)
+ goto out;
+
+ module_name = kstrdup(module_name, GFP_KERNEL);
+ if (!module_name)
+ goto free_argv;
+
+ argv[0] = modprobe_path;
+ argv[1] = "-q";
+ argv[2] = "--";
+ argv[3] = module_name; /* check free_modprobe_argv() */
+ argv[4] = NULL;
+
+ return call_usermodehelper_fns(modprobe_path, argv, envp,
+ wait | UMH_KILLABLE, NULL, free_modprobe_argv, NULL);
+free_argv:
+ kfree(argv);
+out:
+ return -ENOMEM;
+}
+
/**
* __request_module - try to load a kernel module
* @wait: wait (or not) for the operation to complete
@@ -79,11 +116,6 @@ int __request_module(bool wait, const char *fmt, ...)
char module_name[MODULE_NAME_LEN];
unsigned int max_modprobes;
int ret;
- char *argv[] = { modprobe_path, "-q", "--", module_name, NULL };
- static char *envp[] = { "HOME=/",
- "TERM=linux",
- "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
- NULL };
static atomic_t kmod_concurrent = ATOMIC_INIT(0);
#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
@@ -126,9 +158,7 @@ int __request_module(bool wait, const char *fmt, ...)
trace_module_request(module_name, wait, _RET_IP_);
- ret = call_usermodehelper_fns(modprobe_path, argv, envp,
- wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC,
- NULL, NULL, NULL);
+ ret = call_modprobe(module_name, wait ? UMH_WAIT_PROC : UMH_WAIT_EXEC);
atomic_dec(&kmod_concurrent);
return ret;
@@ -186,7 +216,7 @@ static int ____call_usermodehelper(void *data)
/* Exec failed? */
fail:
sub_info->retval = retval;
- do_exit(0);
+ return 0;
}
void call_usermodehelper_freeinfo(struct subprocess_info *info)
@@ -197,6 +227,19 @@ void call_usermodehelper_freeinfo(struct subprocess_info *info)
}
EXPORT_SYMBOL(call_usermodehelper_freeinfo);
+static void umh_complete(struct subprocess_info *sub_info)
+{
+ struct completion *comp = xchg(&sub_info->complete, NULL);
+ /*
+ * See call_usermodehelper_exec(). If xchg() returns NULL
+ * we own sub_info, the UMH_KILLABLE caller has gone away.
+ */
+ if (comp)
+ complete(comp);
+ else
+ call_usermodehelper_freeinfo(sub_info);
+}
+
/* Keventd can't block, but this (a child) can. */
static int wait_for_helper(void *data)
{
@@ -233,7 +276,7 @@ static int wait_for_helper(void *data)
sub_info->retval = ret;
}
- complete(sub_info->complete);
+ umh_complete(sub_info);
return 0;
}
@@ -245,6 +288,9 @@ static void __call_usermodehelper(struct work_struct *work)
enum umh_wait wait = sub_info->wait;
pid_t pid;
+ if (wait != UMH_NO_WAIT)
+ wait &= ~UMH_KILLABLE;
+
/* CLONE_VFORK: wait until the usermode helper has execve'd
* successfully We need the data structures to stay around
* until that is done. */
@@ -267,7 +313,7 @@ static void __call_usermodehelper(struct work_struct *work)
case UMH_WAIT_EXEC:
if (pid < 0)
sub_info->retval = pid;
- complete(sub_info->complete);
+ umh_complete(sub_info);
}
}
@@ -435,9 +481,21 @@ int call_usermodehelper_exec(struct subprocess_info *sub_info,
queue_work(khelper_wq, &sub_info->work);
if (wait == UMH_NO_WAIT) /* task has freed sub_info */
goto unlock;
+
+ if (wait & UMH_KILLABLE) {
+ retval = wait_for_completion_killable(&done);
+ if (!retval)
+ goto wait_done;
+
+ /* umh_complete() will see NULL and free sub_info */
+ if (xchg(&sub_info->complete, NULL))
+ goto unlock;
+ /* fallthrough, umh_complete() was already called */
+ }
+
wait_for_completion(&done);
+wait_done:
retval = sub_info->retval;
-
out:
call_usermodehelper_freeinfo(sub_info);
unlock:
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index e7cb76d..962c291 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1450,8 +1450,10 @@ static int do_cpu_nanosleep(const clockid_t which_clock, int flags,
while (!signal_pending(current)) {
if (timer.it.cpu.expires.sched == 0) {
/*
- * Our timer fired and was reset.
+ * Our timer fired and was reset, below
+ * deletion can not fail.
*/
+ posix_cpu_timer_del(&timer);
spin_unlock_irq(&timer.it_lock);
return 0;
}
@@ -1469,9 +1471,26 @@ static int do_cpu_nanosleep(const clockid_t which_clock, int flags,
* We were interrupted by a signal.
*/
sample_to_timespec(which_clock, timer.it.cpu.expires, rqtp);
- posix_cpu_timer_set(&timer, 0, &zero_it, it);
+ error = posix_cpu_timer_set(&timer, 0, &zero_it, it);
+ if (!error) {
+ /*
+ * Timer is now unarmed, deletion can not fail.
+ */
+ posix_cpu_timer_del(&timer);
+ }
spin_unlock_irq(&timer.it_lock);
+ while (error == TIMER_RETRY) {
+ /*
+ * We need to handle case when timer was or is in the
+ * middle of firing. In other cases we already freed
+ * resources.
+ */
+ spin_lock_irq(&timer.it_lock);
+ error = posix_cpu_timer_del(&timer);
+ spin_unlock_irq(&timer.it_lock);
+ }
+
if ((it->it_value.tv_sec | it->it_value.tv_nsec) == 0) {
/*
* It actually did fire already.
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 69185ae..e885be1 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -639,6 +639,13 @@ static struct k_itimer *__lock_timer(timer_t timer_id, unsigned long *flags)
{
struct k_itimer *timr;
+ /*
+ * timer_t could be any type >= int and we want to make sure any
+ * @timer_id outside positive int range fails lookup.
+ */
+ if ((unsigned long long)timer_id > INT_MAX)
+ return NULL;
+
rcu_read_lock();
timr = idr_find(&posix_timers_id, (int)timer_id);
if (timr) {
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index a650694..9f9aa32 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1194,9 +1194,10 @@ static ssize_t bin_dn_node_address(struct file *file,
/* Convert the decnet address to binary */
result = -EIO;
- nodep = strchr(buf, '.') + 1;
+ nodep = strchr(buf, '.');
if (!nodep)
goto out;
+ ++nodep;
area = simple_strtoul(buf, NULL, 10);
node = simple_strtoul(nodep, NULL, 10);
diff --git a/kernel/timeconst.pl b/kernel/timeconst.pl
index eb51d76..3f42652 100644
--- a/kernel/timeconst.pl
+++ b/kernel/timeconst.pl
@@ -369,10 +369,8 @@ if ($hz eq '--can') {
die "Usage: $0 HZ\n";
}
- @val = @{$canned_values{$hz}};
- if (!defined(@val)) {
- @val = compute_values($hz);
- }
+ $cv = $canned_values{$hz};
+ @val = defined($cv) ? @$cv : compute_values($hz);
output($hz, @val);
}
exit 0;
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 4b1a96b..6c880e8 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3454,37 +3454,51 @@ static void ftrace_init_module(struct module *mod,
ftrace_process_locs(mod, start, end);
}
-static int ftrace_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+ unsigned long val, void *data)
{
struct module *mod = data;
- switch (val) {
- case MODULE_STATE_COMING:
+ if (val == MODULE_STATE_COMING)
ftrace_init_module(mod, mod->ftrace_callsites,
mod->ftrace_callsites +
mod->num_ftrace_callsites);
- break;
- case MODULE_STATE_GOING:
+ return 0;
+}
+
+static int ftrace_module_notify_exit(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct module *mod = data;
+
+ if (val == MODULE_STATE_GOING)
ftrace_release_mod(mod);
- break;
- }
return 0;
}
#else
-static int ftrace_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ return 0;
+}
+static int ftrace_module_notify_exit(struct notifier_block *self,
+ unsigned long val, void *data)
{
return 0;
}
#endif /* CONFIG_MODULES */
-struct notifier_block ftrace_module_nb = {
- .notifier_call = ftrace_module_notify,
+struct notifier_block ftrace_module_enter_nb = {
+ .notifier_call = ftrace_module_notify_enter,
.priority = INT_MAX, /* Run before anything that can use kprobes */
};
+struct notifier_block ftrace_module_exit_nb = {
+ .notifier_call = ftrace_module_notify_exit,
+ .priority = INT_MIN, /* Run after anything that can remove kprobes */
+};
+
extern unsigned long __start_mcount_loc[];
extern unsigned long __stop_mcount_loc[];
@@ -3516,9 +3530,13 @@ void __init ftrace_init(void)
__start_mcount_loc,
__stop_mcount_loc);
- ret = register_module_notifier(&ftrace_module_nb);
+ ret = register_module_notifier(&ftrace_module_enter_nb);
+ if (ret)
+ pr_warning("Failed to register trace ftrace module enter notifier\n");
+
+ ret = register_module_notifier(&ftrace_module_exit_nb);
if (ret)
- pr_warning("Failed to register trace ftrace module notifier\n");
+ pr_warning("Failed to register trace ftrace module exit notifier\n");
set_ftrace_early_filters();
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 7bf068a..0ad2420 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -128,6 +128,7 @@ struct worker {
};
struct work_struct *current_work; /* L: work being processed */
+ work_func_t current_func; /* L: current_work's fn */
struct cpu_workqueue_struct *current_cwq; /* L: current_work's cwq */
struct list_head scheduled; /* L: scheduled works */
struct task_struct *task; /* I: worker task */
@@ -843,7 +844,8 @@ static struct worker *__find_worker_executing_work(struct global_cwq *gcwq,
struct hlist_node *tmp;
hlist_for_each_entry(worker, tmp, bwh, hentry)
- if (worker->current_work == work)
+ if (worker->current_work == work &&
+ worker->current_func == work->func)
return worker;
return NULL;
}
@@ -853,9 +855,27 @@ static struct worker *__find_worker_executing_work(struct global_cwq *gcwq,
* @gcwq: gcwq of interest
* @work: work to find worker for
*
- * Find a worker which is executing @work on @gcwq. This function is
- * identical to __find_worker_executing_work() except that this
- * function calculates @bwh itself.
+ * Find a worker which is executing @work on @gcwq by searching
+ * @gcwq->busy_hash which is keyed by the address of @work. For a worker
+ * to match, its current execution should match the address of @work and
+ * its work function. This is to avoid unwanted dependency between
+ * unrelated work executions through a work item being recycled while still
+ * being executed.
+ *
+ * This is a bit tricky. A work item may be freed once its execution
+ * starts and nothing prevents the freed area from being recycled for
+ * another work item. If the same work item address ends up being reused
+ * before the original execution finishes, workqueue will identify the
+ * recycled work item as currently executing and make it wait until the
+ * current execution finishes, introducing an unwanted dependency.
+ *
+ * This function checks the work item address, work function and workqueue
+ * to avoid false positives. Note that this isn't complete as one may
+ * construct a work function which can introduce dependency onto itself
+ * through a recycled work item. Well, if somebody wants to shoot oneself
+ * in the foot that badly, there's only so much we can do, and if such
+ * deadlock actually occurs, it should be easy to locate the culprit work
+ * function.
*
* CONTEXT:
* spin_lock_irq(gcwq->lock).
@@ -1816,7 +1836,6 @@ __acquires(&gcwq->lock)
struct global_cwq *gcwq = cwq->gcwq;
struct hlist_head *bwh = busy_worker_head(gcwq, work);
bool cpu_intensive = cwq->wq->flags & WQ_CPU_INTENSIVE;
- work_func_t f = work->func;
int work_color;
struct worker *collision;
#ifdef CONFIG_LOCKDEP
@@ -1845,6 +1864,7 @@ __acquires(&gcwq->lock)
debug_work_deactivate(work);
hlist_add_head(&worker->hentry, bwh);
worker->current_work = work;
+ worker->current_func = work->func;
worker->current_cwq = cwq;
work_color = get_work_color(work);
@@ -1882,7 +1902,7 @@ __acquires(&gcwq->lock)
lock_map_acquire_read(&cwq->wq->lockdep_map);
lock_map_acquire(&lockdep_map);
trace_workqueue_execute_start(work);
- f(work);
+ worker->current_func(work);
/*
* While we must be careful to not use "work" after this, the trace
* point will only record its address.
@@ -1892,11 +1912,10 @@ __acquires(&gcwq->lock)
lock_map_release(&cwq->wq->lockdep_map);
if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
- printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
- "%s/0x%08x/%d\n",
- current->comm, preempt_count(), task_pid_nr(current));
- printk(KERN_ERR " last function: ");
- print_symbol("%s\n", (unsigned long)f);
+ pr_err("BUG: workqueue leaked lock or atomic: %s/0x%08x/%d\n"
+ " last function: %pf\n",
+ current->comm, preempt_count(), task_pid_nr(current),
+ worker->current_func);
debug_show_held_locks(current);
dump_stack();
}
@@ -1910,6 +1929,7 @@ __acquires(&gcwq->lock)
/* we're done with it, release */
hlist_del_init(&worker->hentry);
worker->current_work = NULL;
+ worker->current_func = NULL;
worker->current_cwq = NULL;
cwq_dec_nr_in_flight(cwq, work_color, false);
}
diff --git a/lib/idr.c b/lib/idr.c
index ed055b2..aadc525 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -39,6 +39,14 @@
static struct kmem_cache *idr_layer_cache;
static DEFINE_SPINLOCK(simple_ida_lock);
+/* the maximum ID which can be allocated given idr->layers */
+static int idr_max(int layers)
+{
+ int bits = min_t(int, layers * IDR_BITS, MAX_ID_SHIFT);
+
+ return (1 << bits) - 1;
+}
+
static struct idr_layer *get_from_free_list(struct idr *idp)
{
struct idr_layer *p;
@@ -223,7 +231,7 @@ build_up:
* Add a new layer to the top of the tree if the requested
* id is larger than the currently allocated space.
*/
- while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) {
+ while (id > idr_max(layers)) {
layers++;
if (!p->count) {
/* special case: if the tree is currently empty,
@@ -265,7 +273,7 @@ build_up:
static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
{
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
int id;
id = idr_get_empty_slot(idp, starting_id, pa);
@@ -357,7 +365,7 @@ static void idr_remove_warning(int id)
static void sub_remove(struct idr *idp, int shift, int id)
{
struct idr_layer *p = idp->top;
- struct idr_layer **pa[MAX_LEVEL];
+ struct idr_layer **pa[MAX_LEVEL + 1];
struct idr_layer ***paa = &pa[0];
struct idr_layer *to_free;
int n;
@@ -451,16 +459,16 @@ void idr_remove_all(struct idr *idp)
int n, id, max;
int bt_mask;
struct idr_layer *p;
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
struct idr_layer **paa = &pa[0];
n = idp->layers * IDR_BITS;
p = idp->top;
rcu_assign_pointer(idp->top, NULL);
- max = 1 << n;
+ max = idr_max(idp->layers);
id = 0;
- while (id < max) {
+ while (id >= 0 && id <= max) {
while (n > IDR_BITS && p) {
n -= IDR_BITS;
*paa++ = p;
@@ -519,7 +527,7 @@ void *idr_find(struct idr *idp, int id)
/* Mask off upper bits we don't use for the search. */
id &= MAX_ID_MASK;
- if (id >= (1 << n))
+ if (id > idr_max(p->layer + 1))
return NULL;
BUG_ON(n == 0);
@@ -555,15 +563,15 @@ int idr_for_each(struct idr *idp,
{
int n, id, max, error = 0;
struct idr_layer *p;
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
struct idr_layer **paa = &pa[0];
n = idp->layers * IDR_BITS;
p = rcu_dereference_raw(idp->top);
- max = 1 << n;
+ max = idr_max(idp->layers);
id = 0;
- while (id < max) {
+ while (id >= 0 && id <= max) {
while (n > 0 && p) {
n -= IDR_BITS;
*paa++ = p;
@@ -595,23 +603,25 @@ EXPORT_SYMBOL(idr_for_each);
* Returns pointer to registered object with id, which is next number to
* given id. After being looked up, *@nextidp will be updated for the next
* iteration.
+ *
+ * This function can be called under rcu_read_lock(), given that the leaf
+ * pointers lifetimes are correctly managed.
*/
-
void *idr_get_next(struct idr *idp, int *nextidp)
{
- struct idr_layer *p, *pa[MAX_LEVEL];
+ struct idr_layer *p, *pa[MAX_LEVEL + 1];
struct idr_layer **paa = &pa[0];
int id = *nextidp;
int n, max;
/* find first ent */
- n = idp->layers * IDR_BITS;
- max = 1 << n;
p = rcu_dereference_raw(idp->top);
if (!p)
return NULL;
+ n = (p->layer + 1) * IDR_BITS;
+ max = idr_max(p->layer + 1);
- while (id < max) {
+ while (id >= 0 && id <= max) {
while (n > 0 && p) {
n -= IDR_BITS;
*paa++ = p;
@@ -623,7 +633,14 @@ void *idr_get_next(struct idr *idp, int *nextidp)
return p;
}
- id += 1 << n;
+ /*
+ * Proceed to the next layer at the current level. Unlike
+ * idr_for_each(), @id isn't guaranteed to be aligned to
+ * layer boundary at this point and adding 1 << n may
+ * incorrectly skip IDs. Make sure we jump to the
+ * beginning of the next layer using round_up().
+ */
+ id = round_up(id + 1, 1 << n);
while (n < fls(id)) {
n += IDR_BITS;
p = *--paa;
@@ -778,7 +795,7 @@ EXPORT_SYMBOL(ida_pre_get);
*/
int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
{
- struct idr_layer *pa[MAX_LEVEL];
+ struct idr_layer *pa[MAX_LEVEL + 1];
struct ida_bitmap *bitmap;
unsigned long flags;
int idr_id = starting_id / IDA_BITMAP_BITS;
diff --git a/mm/fadvise.c b/mm/fadvise.c
index 8d723c9..35b2bb0 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -17,6 +17,7 @@
#include <linux/fadvise.h>
#include <linux/writeback.h>
#include <linux/syscalls.h>
+#include <linux/swap.h>
#include <asm/unistd.h>
@@ -123,9 +124,22 @@ SYSCALL_DEFINE(fadvise64_64)(int fd, loff_t offset, loff_t len, int advice)
start_index = (offset+(PAGE_CACHE_SIZE-1)) >> PAGE_CACHE_SHIFT;
end_index = (endbyte >> PAGE_CACHE_SHIFT);
- if (end_index >= start_index)
- invalidate_mapping_pages(mapping, start_index,
+ if (end_index >= start_index) {
+ unsigned long count = invalidate_mapping_pages(mapping,
+ start_index, end_index);
+
+ /*
+ * If fewer pages were invalidated than expected then
+ * it is possible that some of the pages were on
+ * a per-cpu pagevec for a remote CPU. Drain all
+ * pagevecs and try again.
+ */
+ if (count < (end_index - start_index + 1)) {
+ lru_add_drain_all();
+ invalidate_mapping_pages(mapping, start_index,
end_index);
+ }
+ }
break;
default:
ret = -EINVAL;
diff --git a/mm/mmu_notifier.c b/mm/mmu_notifier.c
index 862b608..8d1ca2d 100644
--- a/mm/mmu_notifier.c
+++ b/mm/mmu_notifier.c
@@ -14,10 +14,14 @@
#include <linux/export.h>
#include <linux/mm.h>
#include <linux/err.h>
+#include <linux/srcu.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
#include <linux/slab.h>
+/* global SRCU for all MMs */
+static struct srcu_struct srcu;
+
/*
* This function can't run concurrently against mmu_notifier_register
* because mm->mm_users > 0 during mmu_notifier_register and exit_mmap
@@ -25,58 +29,61 @@
* in parallel despite there being no task using this mm any more,
* through the vmas outside of the exit_mmap context, such as with
* vmtruncate. This serializes against mmu_notifier_unregister with
- * the mmu_notifier_mm->lock in addition to RCU and it serializes
- * against the other mmu notifiers with RCU. struct mmu_notifier_mm
+ * the mmu_notifier_mm->lock in addition to SRCU and it serializes
+ * against the other mmu notifiers with SRCU. struct mmu_notifier_mm
* can't go away from under us as exit_mmap holds an mm_count pin
* itself.
*/
void __mmu_notifier_release(struct mm_struct *mm)
{
struct mmu_notifier *mn;
- struct hlist_node *n;
+ int id;
/*
- * RCU here will block mmu_notifier_unregister until
- * ->release returns.
+ * srcu_read_lock() here will block synchronize_srcu() in
+ * mmu_notifier_unregister() until all registered
+ * ->release() callouts this function makes have
+ * returned.
*/
- rcu_read_lock();
- hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist)
- /*
- * if ->release runs before mmu_notifier_unregister it
- * must be handled as it's the only way for the driver
- * to flush all existing sptes and stop the driver
- * from establishing any more sptes before all the
- * pages in the mm are freed.
- */
- if (mn->ops->release)
- mn->ops->release(mn, mm);
- rcu_read_unlock();
-
+ id = srcu_read_lock(&srcu);
spin_lock(&mm->mmu_notifier_mm->lock);
while (unlikely(!hlist_empty(&mm->mmu_notifier_mm->list))) {
mn = hlist_entry(mm->mmu_notifier_mm->list.first,
struct mmu_notifier,
hlist);
+
/*
- * We arrived before mmu_notifier_unregister so
- * mmu_notifier_unregister will do nothing other than
- * to wait ->release to finish and
- * mmu_notifier_unregister to return.
+ * Unlink. This will prevent mmu_notifier_unregister()
+ * from also making the ->release() callout.
*/
hlist_del_init_rcu(&mn->hlist);
+ spin_unlock(&mm->mmu_notifier_mm->lock);
+
+ /*
+ * Clear sptes. (see 'release' description in mmu_notifier.h)
+ */
+ if (mn->ops->release)
+ mn->ops->release(mn, mm);
+
+ spin_lock(&mm->mmu_notifier_mm->lock);
}
spin_unlock(&mm->mmu_notifier_mm->lock);
/*
- * synchronize_rcu here prevents mmu_notifier_release to
- * return to exit_mmap (which would proceed freeing all pages
- * in the mm) until the ->release method returns, if it was
- * invoked by mmu_notifier_unregister.
- *
- * The mmu_notifier_mm can't go away from under us because one
- * mm_count is hold by exit_mmap.
+ * All callouts to ->release() which we have done are complete.
+ * Allow synchronize_srcu() in mmu_notifier_unregister() to complete
+ */
+ srcu_read_unlock(&srcu, id);
+
+ /*
+ * mmu_notifier_unregister() may have unlinked a notifier and may
+ * still be calling out to it. Additionally, other notifiers
+ * may have been active via vmtruncate() et. al. Block here
+ * to ensure that all notifier callouts for this mm have been
+ * completed and the sptes are really cleaned up before returning
+ * to exit_mmap().
*/
- synchronize_rcu();
+ synchronize_srcu(&srcu);
}
/*
@@ -89,14 +96,14 @@ int __mmu_notifier_clear_flush_young(struct mm_struct *mm,
{
struct mmu_notifier *mn;
struct hlist_node *n;
- int young = 0;
+ int young = 0, id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->clear_flush_young)
young |= mn->ops->clear_flush_young(mn, mm, address);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
return young;
}
@@ -106,9 +113,9 @@ int __mmu_notifier_test_young(struct mm_struct *mm,
{
struct mmu_notifier *mn;
struct hlist_node *n;
- int young = 0;
+ int young = 0, id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->test_young) {
young = mn->ops->test_young(mn, mm, address);
@@ -116,7 +123,7 @@ int __mmu_notifier_test_young(struct mm_struct *mm,
break;
}
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
return young;
}
@@ -126,8 +133,9 @@ void __mmu_notifier_change_pte(struct mm_struct *mm, unsigned long address,
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->change_pte)
mn->ops->change_pte(mn, mm, address, pte);
@@ -138,7 +146,7 @@ void __mmu_notifier_change_pte(struct mm_struct *mm, unsigned long address,
else if (mn->ops->invalidate_page)
mn->ops->invalidate_page(mn, mm, address);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
void __mmu_notifier_invalidate_page(struct mm_struct *mm,
@@ -146,13 +154,14 @@ void __mmu_notifier_invalidate_page(struct mm_struct *mm,
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->invalidate_page)
mn->ops->invalidate_page(mn, mm, address);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
@@ -160,13 +169,14 @@ void __mmu_notifier_invalidate_range_start(struct mm_struct *mm,
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->invalidate_range_start)
mn->ops->invalidate_range_start(mn, mm, start, end);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
@@ -174,13 +184,14 @@ void __mmu_notifier_invalidate_range_end(struct mm_struct *mm,
{
struct mmu_notifier *mn;
struct hlist_node *n;
+ int id;
- rcu_read_lock();
+ id = srcu_read_lock(&srcu);
hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, hlist) {
if (mn->ops->invalidate_range_end)
mn->ops->invalidate_range_end(mn, mm, start, end);
}
- rcu_read_unlock();
+ srcu_read_unlock(&srcu, id);
}
static int do_mmu_notifier_register(struct mmu_notifier *mn,
@@ -192,6 +203,12 @@ static int do_mmu_notifier_register(struct mmu_notifier *mn,
BUG_ON(atomic_read(&mm->mm_users) <= 0);
+ /*
+ * Verify that mmu_notifier_init() already run and the global srcu is
+ * initialized.
+ */
+ BUG_ON(!srcu.per_cpu_ref);
+
ret = -ENOMEM;
mmu_notifier_mm = kmalloc(sizeof(struct mmu_notifier_mm), GFP_KERNEL);
if (unlikely(!mmu_notifier_mm))
@@ -274,8 +291,8 @@ void __mmu_notifier_mm_destroy(struct mm_struct *mm)
/*
* This releases the mm_count pin automatically and frees the mm
* structure if it was the last user of it. It serializes against
- * running mmu notifiers with RCU and against mmu_notifier_unregister
- * with the unregister lock + RCU. All sptes must be dropped before
+ * running mmu notifiers with SRCU and against mmu_notifier_unregister
+ * with the unregister lock + SRCU. All sptes must be dropped before
* calling mmu_notifier_unregister. ->release or any other notifier
* method may be invoked concurrently with mmu_notifier_unregister,
* and only after mmu_notifier_unregister returned we're guaranteed
@@ -285,35 +302,43 @@ void mmu_notifier_unregister(struct mmu_notifier *mn, struct mm_struct *mm)
{
BUG_ON(atomic_read(&mm->mm_count) <= 0);
+ spin_lock(&mm->mmu_notifier_mm->lock);
if (!hlist_unhashed(&mn->hlist)) {
- /*
- * RCU here will force exit_mmap to wait ->release to finish
- * before freeing the pages.
- */
- rcu_read_lock();
+ int id;
/*
- * exit_mmap will block in mmu_notifier_release to
- * guarantee ->release is called before freeing the
- * pages.
+ * Ensure we synchronize up with __mmu_notifier_release().
*/
+ id = srcu_read_lock(&srcu);
+
+ hlist_del_rcu(&mn->hlist);
+ spin_unlock(&mm->mmu_notifier_mm->lock);
+
if (mn->ops->release)
mn->ops->release(mn, mm);
- rcu_read_unlock();
- spin_lock(&mm->mmu_notifier_mm->lock);
- hlist_del_rcu(&mn->hlist);
+ /*
+ * Allow __mmu_notifier_release() to complete.
+ */
+ srcu_read_unlock(&srcu, id);
+ } else
spin_unlock(&mm->mmu_notifier_mm->lock);
- }
/*
- * Wait any running method to finish, of course including
- * ->release if it was run by mmu_notifier_relase instead of us.
+ * Wait for any running method to finish, including ->release() if it
+ * was run by __mmu_notifier_release() instead of us.
*/
- synchronize_rcu();
+ synchronize_srcu(&srcu);
BUG_ON(atomic_read(&mm->mm_count) <= 0);
mmdrop(mm);
}
EXPORT_SYMBOL_GPL(mmu_notifier_unregister);
+
+static int __init mmu_notifier_init(void)
+{
+ return init_srcu_struct(&srcu);
+}
+
+module_init(mmu_notifier_init);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 4d3a697..5c028e2 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4253,10 +4253,11 @@ static void __meminit calculate_node_totalpages(struct pglist_data *pgdat,
* round what is now in bits to nearest long in bits, then return it in
* bytes.
*/
-static unsigned long __init usemap_size(unsigned long zonesize)
+static unsigned long __init usemap_size(unsigned long zone_start_pfn, unsigned long zonesize)
{
unsigned long usemapsize;
+ zonesize += zone_start_pfn & (pageblock_nr_pages-1);
usemapsize = roundup(zonesize, pageblock_nr_pages);
usemapsize = usemapsize >> pageblock_order;
usemapsize *= NR_PAGEBLOCK_BITS;
@@ -4266,17 +4267,19 @@ static unsigned long __init usemap_size(unsigned long zonesize)
}
static void __init setup_usemap(struct pglist_data *pgdat,
- struct zone *zone, unsigned long zonesize)
+ struct zone *zone,
+ unsigned long zone_start_pfn,
+ unsigned long zonesize)
{
- unsigned long usemapsize = usemap_size(zonesize);
+ unsigned long usemapsize = usemap_size(zone_start_pfn, zonesize);
zone->pageblock_flags = NULL;
if (usemapsize)
zone->pageblock_flags = alloc_bootmem_node_nopanic(pgdat,
usemapsize);
}
#else
-static inline void setup_usemap(struct pglist_data *pgdat,
- struct zone *zone, unsigned long zonesize) {}
+static inline void setup_usemap(struct pglist_data *pgdat, struct zone *zone,
+ unsigned long zone_start_pfn, unsigned long zonesize) {}
#endif /* CONFIG_SPARSEMEM */
#ifdef CONFIG_HUGETLB_PAGE_SIZE_VARIABLE
@@ -4401,7 +4404,7 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat,
continue;
set_pageblock_order();
- setup_usemap(pgdat, zone, size);
+ setup_usemap(pgdat, zone, zone_start_pfn, size);
ret = init_currently_empty_zone(zone, zone_start_pfn,
size, MEMMAP_EARLY);
BUG_ON(ret);
diff --git a/mm/shmem.c b/mm/shmem.c
index 12b9e80..a78acf0 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2121,6 +2121,7 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
unsigned long inodes;
int error = -EINVAL;
+ config.mpol = NULL;
if (shmem_parse_options(data, &config, true))
return error;
@@ -2145,8 +2146,13 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
sbinfo->max_inodes = config.max_inodes;
sbinfo->free_inodes = config.max_inodes - inodes;
- mpol_put(sbinfo->mpol);
- sbinfo->mpol = config.mpol; /* transfers initial ref */
+ /*
+ * Preserve previous mempolicy unless mpol remount option was specified.
+ */
+ if (config.mpol) {
+ mpol_put(sbinfo->mpol);
+ sbinfo->mpol = config.mpol; /* transfers initial ref */
+ }
out:
spin_unlock(&sbinfo->stat_lock);
return error;
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index e16aade..718cbe8 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -16,6 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/llc.h>
#include <linux/slab.h>
+#include <linux/pkt_sched.h>
#include <net/net_namespace.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
@@ -40,6 +41,7 @@ static void br_send_bpdu(struct net_bridge_port *p,
skb->dev = p->dev;
skb->protocol = htons(ETH_P_802_2);
+ skb->priority = TC_PRIO_CONTROL;
skb_reserve(skb, LLC_RESERVE);
memcpy(__skb_put(skb, length), data, length);
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 1b5096a..5d228de 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -226,8 +226,12 @@ EXPORT_SYMBOL(inet_listen);
u32 inet_ehash_secret __read_mostly;
EXPORT_SYMBOL(inet_ehash_secret);
+u32 ipv6_hash_secret __read_mostly;
+EXPORT_SYMBOL(ipv6_hash_secret);
+
/*
- * inet_ehash_secret must be set exactly once
+ * inet_ehash_secret must be set exactly once, and to a non nul value
+ * ipv6_hash_secret must be set exactly once.
*/
void build_ehash_secret(void)
{
@@ -237,7 +241,8 @@ void build_ehash_secret(void)
get_random_bytes(&rnd, sizeof(rnd));
} while (rnd == 0);
- cmpxchg(&inet_ehash_secret, 0, rnd);
+ if (cmpxchg(&inet_ehash_secret, 0, rnd) == 0)
+ get_random_bytes(&ipv6_hash_secret, sizeof(ipv6_hash_secret));
}
EXPORT_SYMBOL(build_ehash_secret);
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 43d4c3b..294a380 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -321,8 +321,8 @@ void ping_err(struct sk_buff *skb, u32 info)
struct iphdr *iph = (struct iphdr *)skb->data;
struct icmphdr *icmph = (struct icmphdr *)(skb->data+(iph->ihl<<2));
struct inet_sock *inet_sock;
- int type = icmph->type;
- int code = icmph->code;
+ int type = icmp_hdr(skb)->type;
+ int code = icmp_hdr(skb)->code;
struct net *net = dev_net(skb->dev);
struct sock *sk;
int harderr;
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 3282453..9acee9d 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -816,7 +816,6 @@ static void svc_age_temp_xprts(unsigned long closure)
struct svc_serv *serv = (struct svc_serv *)closure;
struct svc_xprt *xprt;
struct list_head *le, *next;
- LIST_HEAD(to_be_aged);
dprintk("svc_age_temp_xprts\n");
@@ -837,25 +836,15 @@ static void svc_age_temp_xprts(unsigned long closure)
if (atomic_read(&xprt->xpt_ref.refcount) > 1 ||
test_bit(XPT_BUSY, &xprt->xpt_flags))
continue;
- svc_xprt_get(xprt);
- list_move(le, &to_be_aged);
+ list_del_init(le);
set_bit(XPT_CLOSE, &xprt->xpt_flags);
set_bit(XPT_DETACHED, &xprt->xpt_flags);
- }
- spin_unlock_bh(&serv->sv_lock);
-
- while (!list_empty(&to_be_aged)) {
- le = to_be_aged.next;
- /* fiddling the xpt_list node is safe 'cos we're XPT_DETACHED */
- list_del_init(le);
- xprt = list_entry(le, struct svc_xprt, xpt_list);
-
dprintk("queuing xprt %p for closing\n", xprt);
/* a thread will dequeue and close it soon */
svc_xprt_enqueue(xprt);
- svc_xprt_put(xprt);
}
+ spin_unlock_bh(&serv->sv_lock);
mod_timer(&serv->sv_temptimer, jiffies + svc_conn_age_period * HZ);
}
diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c
index 193ce81..42b876d 100644
--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -287,12 +287,14 @@ static int loopback_trigger(struct snd_pcm_substream *substream, int cmd)
loopback_active_notify(dpcm);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
spin_lock(&cable->lock);
cable->pause |= stream;
spin_unlock(&cable->lock);
loopback_timer_stop(dpcm);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ case SNDRV_PCM_TRIGGER_RESUME:
spin_lock(&cable->lock);
dpcm->last_jiffies = jiffies;
cable->pause &= ~stream;
@@ -552,7 +554,8 @@ static snd_pcm_uframes_t loopback_pointer(struct snd_pcm_substream *substream)
static struct snd_pcm_hardware loopback_pcm_hardware =
{
.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_PAUSE),
+ SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_RESUME),
.formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |
SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE),
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index ef85ac5..be662c9 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -1435,7 +1435,7 @@ static snd_pcm_uframes_t snd_ali_pointer(struct snd_pcm_substream *substream)
spin_lock(&codec->reg_lock);
if (!pvoice->running) {
- spin_unlock_irq(&codec->reg_lock);
+ spin_unlock(&codec->reg_lock);
return 0;
}
outb(pvoice->number, ALI_REG(codec, ALI_GC_CIR));
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index bde2615..3e02e17 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -918,8 +918,12 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
if (!static_hdmi_pcm && eld->eld_valid) {
snd_hdmi_eld_update_pcm_info(eld, hinfo);
if (hinfo->channels_min > hinfo->channels_max ||
- !hinfo->rates || !hinfo->formats)
+ !hinfo->rates || !hinfo->formats) {
+ per_cvt->assigned = 0;
+ hinfo->nid = 0;
+ snd_hda_spdif_ctls_unassign(codec, pin_idx);
return -ENODEV;
+ }
}
/* Store the updated parameters */
@@ -983,6 +987,7 @@ static void hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll)
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
codec->addr, pin_nid, eld->monitor_present, eld_valid);
+ eld->eld_valid = false;
if (eld_valid) {
if (!snd_hdmi_get_eld(eld, codec, pin_nid))
snd_hdmi_show_eld(eld);
@@ -1223,6 +1228,9 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pin_idx)
int pcmdev = spec->pcm_rec[pin_idx].device;
snprintf(hdmi_str, sizeof(hdmi_str), "HDMI/DP,pcm=%d", pcmdev);
+ if (!is_jack_detectable(codec, per_pin->pin_nid))
+ strncat(hdmi_str, " Phantom",
+ sizeof(hdmi_str) - strlen(hdmi_str) - 1);
err = snd_hda_input_jack_add(codec, per_pin->pin_nid,
SND_JACK_VIDEOOUT, pcmdev > 0 ? hdmi_str : NULL);
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index 21bcb47..62075a5 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -1017,7 +1017,7 @@ static int snd_rme32_capture_close(struct snd_pcm_substream *substream)
spin_lock_irq(&rme32->lock);
rme32->capture_substream = NULL;
rme32->capture_periodsize = 0;
- spin_unlock(&rme32->lock);
+ spin_unlock_irq(&rme32->lock);
return 0;
}
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 32d2a21..4e25148 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1624,7 +1624,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
/* .vendor_name = "Roland", */
/* .product_name = "A-PRO", */
- .ifnum = 1,
+ .ifnum = 0,
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = & (const struct snd_usb_midi_endpoint_info) {
.out_cables = 0x0003,
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply related [flat|nested] 172+ messages in thread* Re: [ 000/153] 3.2.40-stable review
2013-03-04 3:37 [ 000/153] 3.2.40-stable review Ben Hutchings
` (153 preceding siblings ...)
2013-03-04 4:29 ` [ 000/153] 3.2.40-stable review Ben Hutchings
@ 2013-03-05 14:07 ` Satoru Takeuchi
2013-03-05 14:31 ` Ben Hutchings
154 siblings, 1 reply; 172+ messages in thread
From: Satoru Takeuchi @ 2013-03-05 14:07 UTC (permalink / raw)
To: Ben Hutchings; +Cc: linux-kernel, stable, torvalds, akpm
At Mon, 04 Mar 2013 03:37:07 +0000,
Ben Hutchings wrote:
>
> This is the start of the stable review cycle for the 3.2.40 release.
> There are 153 patches in this series, which will be posted as responses
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Mar 6 02:00:00 UTC 2013.
> Anything received after that time might be too late.
>
> A combined patch relative to 3.2.39 will be posted as an additional
> response to this. A shortlog and diffstat can be found below.
This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.
- Build Machine: debian wheezy x86_64
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
memory: 8GB
- Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
vCPU: x2
memory: 2GB
I reviewed the following patches and it looks good to me.
> Matt Fleming (1):
> x86, efi: Make "noefi" really disable EFI runtime serivces
> [fb834c7acc5e140cf4f9e86da93a66de8c0514da]
...
> Satoru Takeuchi (1):
> efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter
> [1de63d60cd5b0d33a812efa455d5933bf1564a51]
Thanks,
Satoru
^ permalink raw reply [flat|nested] 172+ messages in thread* Re: [ 000/153] 3.2.40-stable review
2013-03-05 14:07 ` Satoru Takeuchi
@ 2013-03-05 14:31 ` Ben Hutchings
0 siblings, 0 replies; 172+ messages in thread
From: Ben Hutchings @ 2013-03-05 14:31 UTC (permalink / raw)
To: Satoru Takeuchi; +Cc: linux-kernel, stable, torvalds, akpm
[-- Attachment #1: Type: text/plain, Size: 1541 bytes --]
On Tue, 2013-03-05 at 23:07 +0900, Satoru Takeuchi wrote:
> At Mon, 04 Mar 2013 03:37:07 +0000,
> Ben Hutchings wrote:
> >
> > This is the start of the stable review cycle for the 3.2.40 release.
> > There are 153 patches in this series, which will be posted as responses
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed Mar 6 02:00:00 UTC 2013.
> > Anything received after that time might be too late.
> >
> > A combined patch relative to 3.2.39 will be posted as an additional
> > response to this. A shortlog and diffstat can be found below.
>
> This kernel can be built and boot without any problem.
> Building a kernel with this kernel also works fine.
>
> - Build Machine: debian wheezy x86_64
> CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
> memory: 8GB
>
> - Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
> vCPU: x2
> memory: 2GB
>
> I reviewed the following patches and it looks good to me.
Thanks.
Ben.
> > Matt Fleming (1):
> > x86, efi: Make "noefi" really disable EFI runtime serivces
> > [fb834c7acc5e140cf4f9e86da93a66de8c0514da]
> ...
> > Satoru Takeuchi (1):
> > efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter
> > [1de63d60cd5b0d33a812efa455d5933bf1564a51]
>
> Thanks,
> Satoru
>
--
Ben Hutchings
Always try to do things in chronological order;
it's less confusing that way.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply [flat|nested] 172+ messages in thread