From: Nish Aravamudan <nish.aravamudan@gmail.com>
To: Moritz Muehlenhoff <jmm@inutil.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.12-rc2
Date: Thu, 7 Apr 2005 11:54:26 -0700 [thread overview]
Message-ID: <29495f1d05040711544695ce89@mail.gmail.com> (raw)
In-Reply-To: <20050407175026.GA5872@informatik.uni-bremen.de>
[-- Attachment #1: Type: text/plain, Size: 1190 bytes --]
On Apr 7, 2005 10:50 AM, Moritz Muehlenhoff <jmm@inutil.org> wrote:
> Benjamin Herrenschmidt wrote:
> > > 1. When resuming from S3 suspend and having switched off the backlight
> > > with radeontool the backlight isn't switched back on any more.
> >
> > I'm not sure what's up here, it's a nasty issue with backlight. Can
> > radeontool bring it back ?
>
> Before suspending I power down the backlight with "radeontool light off"
> and with 2.6.11 the display is properly restored. With 2.6.12rc2 the
> backlight remains switched off and if I switch it on with radeontool it
> becomes lighter, but there's still no text from the fbcon, just the blank
> screen.
FWIW, I have the same problem on a T41p with 2.6.11 and 2.6.12-rc2,
except that neither returns from suspend-to-ram with video restored on
the LCD. I believe I was able to get video restored on an external CRT
in either 2.6.12-rc2 or 2.6.12-rc2-mm1, but the LCD still didn't
restore (can verify later today, if you'd like). I had dumped out the
radeontool regs values before & after the sleep, in case they help.
They are attached.
I posted these problems in the "Call for help S3" thread, but no one responded.
Thanks,
Nish
[-- Attachment #2: radeontool_pre --]
[-- Type: application/octet-stream, Size: 492 bytes --]
RADEON_DAC_CNTL=ff002102
RADEON_DAC_CNTL2=00000000
RADEON_TV_DAC_CNTL=07770142
RADEON_DISP_OUTPUT_CNTL=10000008
RADEON_CONFIG_MEMSIZE=08000000
RADEON_AUX_SC_CNTL=00000000
RADEON_CRTC_EXT_CNTL=0d008048
RADEON_CRTC_GEN_CNTL=03000200
RADEON_CRTC2_GEN_CNTL=00800000
RADEON_DEVICE_ID=00004e54
RADEON_DISP_MISC_CNTL=5b300600
RADEON_GPIO_MONID=00000000
RADEON_GPIO_MONIDB=00000000
RADEON_GPIO_CRT2_DDC=00000000
RADEON_GPIO_DVI_DDC=00000300
RADEON_GPIO_VGA_DDC=00000300
RADEON_LVDS_GEN_CNTL=003cffa1
[-- Attachment #3: radeontool_post --]
[-- Type: application/octet-stream, Size: 492 bytes --]
RADEON_DAC_CNTL=ff002102
RADEON_DAC_CNTL2=00000000
RADEON_TV_DAC_CNTL=00770103
RADEON_DISP_OUTPUT_CNTL=1000000a
RADEON_CONFIG_MEMSIZE=08000000
RADEON_AUX_SC_CNTL=00000000
RADEON_CRTC_EXT_CNTL=00000048
RADEON_CRTC_GEN_CNTL=03000200
RADEON_CRTC2_GEN_CNTL=02000000
RADEON_DEVICE_ID=00004e54
RADEON_DISP_MISC_CNTL=5b300600
RADEON_GPIO_MONID=00000000
RADEON_GPIO_MONIDB=00000000
RADEON_GPIO_CRT2_DDC=00000000
RADEON_GPIO_DVI_DDC=00000300
RADEON_GPIO_VGA_DDC=00000300
RADEON_LVDS_GEN_CNTL=080c0089
next prev parent reply other threads:[~2005-04-07 18:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Pine.LNX.4.58.0504040945100.32180@ppc970.osdl.org>
2005-04-04 21:32 ` Linux 2.6.12-rc2 Linus Torvalds
2005-04-04 22:58 ` Andres Salomon
2005-04-04 23:04 ` Andres Salomon
2005-04-04 23:07 ` Andres Salomon
2005-04-04 23:24 ` Al Viro
2005-04-04 23:49 ` Russell King
2005-04-04 23:54 ` Al Viro
2005-04-04 23:37 ` Stephen Rothwell
2005-04-04 23:54 ` Al Viro
2005-04-05 4:54 ` Gene Heskett
2005-04-06 17:14 ` Moritz Muehlenhoff
2005-04-06 22:42 ` Benjamin Herrenschmidt
2005-04-07 17:50 ` Moritz Muehlenhoff
2005-04-07 18:54 ` Nish Aravamudan [this message]
2005-04-07 22:45 ` Benjamin Herrenschmidt
2005-04-08 0:44 ` Nish Aravamudan
2005-04-08 6:28 ` AsterixTheGaul
2005-04-08 6:39 ` AsterixTheGaul
2005-04-08 7:00 ` AsterixTheGaul
2005-04-08 15:39 ` Nish Aravamudan
2005-04-08 18:14 ` AsterixTheGaul
2005-04-07 22:43 ` Benjamin Herrenschmidt
2005-04-05 7:29 Oleg Nesterov
2005-04-05 8:03 ` Andrew Morton
-- strict thread matches above, loose matches on Subject: below --
2005-04-05 14:56 Hubert Tonneau
2005-04-06 23:20 Bob Gill
2005-04-06 23:25 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29495f1d05040711544695ce89@mail.gmail.com \
--to=nish.aravamudan@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=jmm@inutil.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox