Re: NForce4 ide problems?

["ismail dönmez" <ismail.donmez@gmail.com>]

FWIW problem happens way before any driver is loaded ( i.e nVidia ) so
this is not a such problem.


On 4/20/05, ismail dönmez <ismail.donmez@gmail.com> wrote:
> Hi all,
> 
> I recently bought an Asus A8N-SLI mobo and an AMD 3500+ CPU for my
> system but my ide drive seems to have some problems with them. Here is
> what I get at boot :
> 
> <snip>
> hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63,
> UDMA(100)
> hda: cache flushes supported
>  /dev/ide/host0/bus0/target0/lun0:hda: dma_intr: status=0x51 {
> DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide: failed opcode was: unknown
> </snip>
> 
> First I thought it was bad ide cable ( because I wasn't using the one
> that came with mobo ) so I tried with the brand new cable coming with
> mobo and same error happened. Also trying to do something like :
> 
> hdparm -m16 -c -u1 -d1 -Xudma2 /dev/hda
> 
> results in a cpu exception thrown and a kernel panic after that. Full
> dmesg log is attached. I appreciate any help/comments.
> 
> P.S: I tried with kernel 2.6.10 and 2.6.12-rc2 and same problems happen
> 
> Regards,
> ismail
> 
> 
> -- 
> Time is what you make of it
> 
> 

-- 
Time is what you make of it