From: "Rao, Appana Durga Kedareswara" <appanad@amd.com>
To: Greg KH <gregkh@linuxfoundation.org>,
Appana Durga Kedareswara rao
<appana.durga.kedareswara.rao@amd.com>
Cc: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<michal.simek@xilinx.com>, <derek.kiernan@xilinx.com>,
<dragan.cvetic@xilinx.com>, <arnd@arndb.de>,
<linux-arm-kernel@lists.infradead.org>, <git@amd.com>
Subject: Re: [PATCH v3 4/4] drivers: misc: Add Support for TMR Inject IP
Date: Thu, 8 Sep 2022 12:35:27 +0530 [thread overview]
Message-ID: <2ba61271-8d3f-cbd2-164e-8f4968e5dcad@amd.com> (raw)
In-Reply-To: <YxmFgblww9VfySnv@kroah.com>
Hi Greg,
Thanks for the review.
On 08/09/22 11:32 am, Greg KH wrote:
> On Thu, Sep 08, 2022 at 09:54:44AM +0530, Appana Durga Kedareswara rao wrote:
>> The Triple Modular Redundancy(TMR) provides functional fault injection by
>> changing selected MicroBlaze instructions, which provides the possibility
>> to verify that the TMR subsystem error detection and fault recovery logic
>> is working properly, provided sysfs entries which allow the user to inject
>> a fault.
>>
>> Usage:
>> echo 1 > /sys/kernel/debug/xtmr_inject/inject_fault/inject_fault
>>
>> Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
>> ---
>> Changes for v3:
>> --> Updated the driver to use fault-injection api as suggested by Greg.
>> --> Updated the Kconfig to compile the driver as a module.
>> Changes for v2:
>> --> Fixed Month in the sysfs description.
>> --> Fixed line over 80 char in driver.
>> --> Replaced kstrtol with kstrtoul as suggested by Michal.
>> --> Added error check for xlnx,magic value.
>>
>> MAINTAINERS | 6 +
>> drivers/misc/Kconfig | 10 ++
>> drivers/misc/Makefile | 1 +
>> drivers/misc/xilinx_tmr_inject.c | 181 +++++++++++++++++++++++++++++++
>> 4 files changed, 198 insertions(+)
>> create mode 100644 drivers/misc/xilinx_tmr_inject.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 5fc5ec13985e..1207effa8e15 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -13284,6 +13284,12 @@ F: Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
>> F: Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
>> F: drivers/misc/xilinx_tmr_manager.c
>>
>> +MICROBLAZE TMR INJECT
>> +M: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
>> +S: Supported
>> +F: Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
>> +F: drivers/misc/xilinx_tmr_inject.c
>> +
>> MICROCHIP AT91 DMA DRIVERS
>> M: Ludovic Desroches <ludovic.desroches@microchip.com>
>> M: Tudor Ambarus <tudor.ambarus@microchip.com>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index 1508cc29b05a..7b1930a7f18a 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -506,6 +506,16 @@ config TMR_MANAGER
>>
>> Say N here unless you know what you are doing.
>>
>> +config TMR_INJECT
>> + tristate "Select TMR Inject"
>> + depends on TMR_MANAGER && FAULT_INJECTION
>
> But if CONFIG_FAULT_INJECTION_DEBUG_FS is not enabled, does this driver
> actually do anything? Why not just depend on that option?
>
Sure will fix and will post v4.
Regards,
Kedar.
> thanks,
>
> greg k-h
prev parent reply other threads:[~2022-09-08 7:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 4:24 [PATCH v3 0/4] drivers: misc: Add support for TMR Manager and Inject IPs Appana Durga Kedareswara rao
2022-09-08 4:24 ` [PATCH v3 1/4] dt-bindings: misc: tmr-manager: Add device-tree binding for TMR Manager Appana Durga Kedareswara rao
2022-09-08 4:24 ` [PATCH v3 2/4] drivers: misc: Add Support " Appana Durga Kedareswara rao
2022-09-08 4:24 ` [PATCH v3 3/4] dt-bindings: misc: tmr-inject: Add device-tree binding for TMR Inject Appana Durga Kedareswara rao
2022-09-08 4:24 ` [PATCH v3 4/4] drivers: misc: Add Support for TMR Inject IP Appana Durga Kedareswara rao
2022-09-08 6:02 ` Greg KH
2022-09-08 7:05 ` Rao, Appana Durga Kedareswara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2ba61271-8d3f-cbd2-164e-8f4968e5dcad@amd.com \
--to=appanad@amd.com \
--cc=appana.durga.kedareswara.rao@amd.com \
--cc=arnd@arndb.de \
--cc=derek.kiernan@xilinx.com \
--cc=devicetree@vger.kernel.org \
--cc=dragan.cvetic@xilinx.com \
--cc=git@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox