* [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
@ 2023-08-09 9:58 Yinbo Zhu
2023-08-29 12:43 ` Yinbo Zhu
2023-09-21 1:58 ` Yinbo Zhu
0 siblings, 2 replies; 5+ messages in thread
From: Yinbo Zhu @ 2023-08-09 9:58 UTC (permalink / raw)
To: Mathias Nyman, Greg Kroah-Hartman, linux-usb, linux-kernel
Cc: Jianmin Lv, wanghongliang, loongson-kernel, Yinbo Zhu
The xhci retaining bogus hardware states cause usb disconnect devices
connected before hibernation(s4) and refer to the commit 'f3d478858be
("usb: ohci-platform: fix usb disconnect issue after s4")' which set
flag "hibernated" as true when resume-from-hibernation and that the
drivers will reset the hardware to get rid of any existing state and
make sure resume from hibernation re-enumerates everything for xhci.
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
---
Change in v2:
1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix
compile issue when CONFIG_PM not enable.
drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 28218c8f1837..112468fdcca2 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
return 0;
}
-static int __maybe_unused xhci_plat_resume(struct device *dev)
+static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
if (ret)
return ret;
- ret = xhci_resume(xhci, PMSG_RESUME);
+ ret = xhci_resume(xhci, pmsg);
if (ret)
return ret;
@@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
return 0;
}
+static int __maybe_unused xhci_plat_resume(struct device *dev)
+{
+ return xhci_plat_resume_common(dev, PMSG_RESUME);
+}
+
+static int __maybe_unused xhci_plat_restore(struct device *dev)
+{
+ return xhci_plat_resume_common(dev, PMSG_RESTORE);
+}
+
static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
@@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
}
const struct dev_pm_ops xhci_plat_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
-
+#ifdef CONFIG_PM_SLEEP
+ .suspend = xhci_plat_suspend,
+ .resume = xhci_plat_resume,
+ .freeze = xhci_plat_suspend,
+ .thaw = xhci_plat_resume,
+ .poweroff = xhci_plat_suspend,
+ .restore = xhci_plat_restore,
+#endif
SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
xhci_plat_runtime_resume,
NULL)
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
2023-08-09 9:58 [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4 Yinbo Zhu
@ 2023-08-29 12:43 ` Yinbo Zhu
2023-08-29 13:49 ` Greg Kroah-Hartman
2023-09-21 1:58 ` Yinbo Zhu
1 sibling, 1 reply; 5+ messages in thread
From: Yinbo Zhu @ 2023-08-29 12:43 UTC (permalink / raw)
To: Mathias Nyman, Greg Kroah-Hartman, linux-usb, linux-kernel
Cc: Jianmin Lv, wanghongliang, loongson-kernel, zhuyinbo
Friendly ping ?
在 2023/8/9 下午5:58, Yinbo Zhu 写道:
> The xhci retaining bogus hardware states cause usb disconnect devices
> connected before hibernation(s4) and refer to the commit 'f3d478858be
> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set
> flag "hibernated" as true when resume-from-hibernation and that the
> drivers will reset the hardware to get rid of any existing state and
> make sure resume from hibernation re-enumerates everything for xhci.
>
> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> ---
> Change in v2:
> 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix
> compile issue when CONFIG_PM not enable.
>
> drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 28218c8f1837..112468fdcca2 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
> return 0;
> }
>
> -static int __maybe_unused xhci_plat_resume(struct device *dev)
> +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
> {
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
> if (ret)
> return ret;
>
> - ret = xhci_resume(xhci, PMSG_RESUME);
> + ret = xhci_resume(xhci, pmsg);
> if (ret)
> return ret;
>
> @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
> return 0;
> }
>
> +static int __maybe_unused xhci_plat_resume(struct device *dev)
> +{
> + return xhci_plat_resume_common(dev, PMSG_RESUME);
> +}
> +
> +static int __maybe_unused xhci_plat_restore(struct device *dev)
> +{
> + return xhci_plat_resume_common(dev, PMSG_RESTORE);
> +}
> +
> static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
> {
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
> }
>
> const struct dev_pm_ops xhci_plat_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
> -
> +#ifdef CONFIG_PM_SLEEP
> + .suspend = xhci_plat_suspend,
> + .resume = xhci_plat_resume,
> + .freeze = xhci_plat_suspend,
> + .thaw = xhci_plat_resume,
> + .poweroff = xhci_plat_suspend,
> + .restore = xhci_plat_restore,
> +#endif
> SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
> xhci_plat_runtime_resume,
> NULL)
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
2023-08-29 12:43 ` Yinbo Zhu
@ 2023-08-29 13:49 ` Greg Kroah-Hartman
0 siblings, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2023-08-29 13:49 UTC (permalink / raw)
To: Yinbo Zhu
Cc: Mathias Nyman, linux-usb, linux-kernel, Jianmin Lv, wanghongliang,
loongson-kernel
On Tue, Aug 29, 2023 at 08:43:18PM +0800, Yinbo Zhu wrote:
>
>
> Friendly ping ?
It's the middle of the merge window, I can't take anything new until
after -rc1 is out.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
2023-08-09 9:58 [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4 Yinbo Zhu
2023-08-29 12:43 ` Yinbo Zhu
@ 2023-09-21 1:58 ` Yinbo Zhu
2023-09-21 12:38 ` Mathias Nyman
1 sibling, 1 reply; 5+ messages in thread
From: Yinbo Zhu @ 2023-09-21 1:58 UTC (permalink / raw)
To: Mathias Nyman, Greg Kroah-Hartman, linux-usb, linux-kernel
Cc: Jianmin Lv, wanghongliang, loongson-kernel, zhuyinbo
Friendly ping ?
在 2023/8/9 下午5:58, Yinbo Zhu 写道:
> The xhci retaining bogus hardware states cause usb disconnect devices
> connected before hibernation(s4) and refer to the commit 'f3d478858be
> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set
> flag "hibernated" as true when resume-from-hibernation and that the
> drivers will reset the hardware to get rid of any existing state and
> make sure resume from hibernation re-enumerates everything for xhci.
>
> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> ---
> Change in v2:
> 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix
> compile issue when CONFIG_PM not enable.
>
> drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 28218c8f1837..112468fdcca2 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
> return 0;
> }
>
> -static int __maybe_unused xhci_plat_resume(struct device *dev)
> +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
> {
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
> if (ret)
> return ret;
>
> - ret = xhci_resume(xhci, PMSG_RESUME);
> + ret = xhci_resume(xhci, pmsg);
> if (ret)
> return ret;
>
> @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
> return 0;
> }
>
> +static int __maybe_unused xhci_plat_resume(struct device *dev)
> +{
> + return xhci_plat_resume_common(dev, PMSG_RESUME);
> +}
> +
> +static int __maybe_unused xhci_plat_restore(struct device *dev)
> +{
> + return xhci_plat_resume_common(dev, PMSG_RESTORE);
> +}
> +
> static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
> {
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
> }
>
> const struct dev_pm_ops xhci_plat_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
> -
> +#ifdef CONFIG_PM_SLEEP
> + .suspend = xhci_plat_suspend,
> + .resume = xhci_plat_resume,
> + .freeze = xhci_plat_suspend,
> + .thaw = xhci_plat_resume,
> + .poweroff = xhci_plat_suspend,
> + .restore = xhci_plat_restore,
> +#endif
> SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend,
> xhci_plat_runtime_resume,
> NULL)
>
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
2023-09-21 1:58 ` Yinbo Zhu
@ 2023-09-21 12:38 ` Mathias Nyman
0 siblings, 0 replies; 5+ messages in thread
From: Mathias Nyman @ 2023-09-21 12:38 UTC (permalink / raw)
To: Yinbo Zhu, Greg Kroah-Hartman, linux-usb, linux-kernel
Cc: Jianmin Lv, wanghongliang, loongson-kernel
On 21.9.2023 4.58, Yinbo Zhu wrote:
>
>
> Friendly ping ?
>
>
> 在 2023/8/9 下午5:58, Yinbo Zhu 写道:
>> The xhci retaining bogus hardware states cause usb disconnect devices
>> connected before hibernation(s4) and refer to the commit 'f3d478858be
>> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set
>> flag "hibernated" as true when resume-from-hibernation and that the
>> drivers will reset the hardware to get rid of any existing state and
>> make sure resume from hibernation re-enumerates everything for xhci.
>>
>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>> ---
>> Change in v2:
>> 1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix
>> compile issue when CONFIG_PM not enable.
>>
>> drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++----
>> 1 file changed, 20 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 28218c8f1837..112468fdcca2 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
>> return 0;
>> }
>> -static int __maybe_unused xhci_plat_resume(struct device *dev)
>> +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
>> {
>> struct usb_hcd *hcd = dev_get_drvdata(dev);
>> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>> @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
>> if (ret)
>> return ret;
>> - ret = xhci_resume(xhci, PMSG_RESUME);
>> + ret = xhci_resume(xhci, pmsg);
>> if (ret)
>> return ret;
>> @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
>> return 0;
>> }
>> +static int __maybe_unused xhci_plat_resume(struct device *dev)
>> +{
>> + return xhci_plat_resume_common(dev, PMSG_RESUME);
>> +}
>> +
>> +static int __maybe_unused xhci_plat_restore(struct device *dev)
>> +{
>> + return xhci_plat_resume_common(dev, PMSG_RESTORE);
>> +}
>> +
>> static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
>> {
>> struct usb_hcd *hcd = dev_get_drvdata(dev);
>> @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
>> }
>> const struct dev_pm_ops xhci_plat_pm_ops = {
>> - SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
>> -
>> +#ifdef CONFIG_PM_SLEEP
>> + .suspend = xhci_plat_suspend,
>> + .resume = xhci_plat_resume,
>> + .freeze = xhci_plat_suspend,
>> + .thaw = xhci_plat_resume,
>> + .poweroff = xhci_plat_suspend,
>> + .restore = xhci_plat_restore,
>> +#endif
How about using pm_ptr() and pm_sleep_ptr() macros instead of the #ifdef CONFIG_PM_SLEEP?
should be able to get rif of the __maybe_unused flags as well.
Thanks
-Mathias
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-09-21 20:28 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-08-09 9:58 [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4 Yinbo Zhu
2023-08-29 12:43 ` Yinbo Zhu
2023-08-29 13:49 ` Greg Kroah-Hartman
2023-09-21 1:58 ` Yinbo Zhu
2023-09-21 12:38 ` Mathias Nyman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox