Re: [PATCH 2/2] ASoC: wsa881x: mark read_only_wordlength flag

[Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>]

On 3/11/20 6:35 AM, Srinivas Kandagatla wrote:
> WSA881x works in PDM mode so the wordlength is fixed, which also makes
> the only field "WordLength" in DPN_BlockCtrl1 register a read-only.
> Writing to this register will throw up errors with Qualcomm Controller.

it'd be good to clarify the nature of these errors, i.e.

a) is this the Slave device responding with a NAK?
b) is this the Slave device responding with COMMAND_IGNORED, and those 
responses not handled by the controller?
c) something else?

Thanks!

> So use ro_blockctrl1_reg flag to mark this field as read-only so that
> core will not write to this register.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
>   sound/soc/codecs/wsa881x.c | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
> index b59f1d0e7f84..35b44b297f9e 100644
> --- a/sound/soc/codecs/wsa881x.c
> +++ b/sound/soc/codecs/wsa881x.c
> @@ -394,6 +394,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = {
>   		.min_ch = 1,
>   		.max_ch = 1,
>   		.simple_ch_prep_sm = true,
> +		.read_only_wordlength = true,
>   	}, {
>   		/* COMP */
>   		.num = 2,
> @@ -401,6 +402,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = {
>   		.min_ch = 1,
>   		.max_ch = 1,
>   		.simple_ch_prep_sm = true,
> +		.read_only_wordlength = true,
>   	}, {
>   		/* BOOST */
>   		.num = 3,
> @@ -408,6 +410,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = {
>   		.min_ch = 1,
>   		.max_ch = 1,
>   		.simple_ch_prep_sm = true,
> +		.read_only_wordlength = true,
>   	}, {
>   		/* VISENSE */
>   		.num = 4,
> @@ -415,6 +418,7 @@ static struct sdw_dpn_prop wsa_sink_dpn_prop[WSA881X_MAX_SWR_PORTS] = {
>   		.min_ch = 1,
>   		.max_ch = 1,
>   		.simple_ch_prep_sm = true,
> +		.read_only_wordlength = true,
>   	}
>   };
>   
>