public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ryan Roberts <ryan.roberts@arm.com>
To: "David Hildenbrand" <david@redhat.com>,
	"Andrew Morton" <akpm@linux-foundation.org>,
	"Shuah Khan" <shuah@kernel.org>,
	"Jérôme Glisse" <jglisse@redhat.com>,
	"Mark Brown" <broonie@kernel.org>,
	"John Hubbard" <jhubbard@nvidia.com>,
	"Florent Revest" <revest@chromium.org>,
	"Peter Xu" <peterx@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	linux-kselftest@vger.kernel.org
Subject: Re: [PATCH v2 6/8] selftests/mm: Make migration test robust to failure
Date: Tue, 18 Jul 2023 11:49:12 +0100	[thread overview]
Message-ID: <2e5baba4-c8ef-9da4-a2d6-3cf383ed05bd@arm.com> (raw)
In-Reply-To: <20501a7c-19f6-4154-aebc-49df04c9b043@redhat.com>

On 17/07/2023 18:40, David Hildenbrand wrote:
> On 17.07.23 12:31, Ryan Roberts wrote:
>> The `migration` test currently has a number of robustness problems that
>> cause it to hang and leak resources.
>>
>> Timeout: There are 3 tests, which each previously ran for 60 seconds.
>> However, the timeout in mm/settings for a single test binary was set to
>> 45 seconds. So when run using run_kselftest.sh, the top level timeout
>> would trigger before the test binary was finished. Solve this by meeting
>> in the middle; each of the 3 tests now runs for 20 seconds (for a total
>> of 60), and the top level timeout is set to 90 seconds.
>>
>> Leaking child processes: the `shared_anon` test fork()s some children
>> but then an ASSERT() fires before the test kills those children. The
>> assert causes immediate exit of the parent and leaking of the children.
>> Furthermore, if run using the run_kselftest.sh wrapper, the wrapper
>> would get stuck waiting for those children to exit, which never happens.
>> Solve this by deferring any asserts until after the children are killed.
>> The same pattern is used for the threaded tests for uniformity.
>>
>> With these changes, the test binary now runs to completion on arm64,
>> with 2 tests passing and the `shared_anon` test failing.
>>
>> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
>> ---
>>   tools/testing/selftests/mm/migration.c | 14 ++++++++++----
>>   tools/testing/selftests/mm/settings    |  2 +-
>>   2 files changed, 11 insertions(+), 5 deletions(-)
>>
>> diff --git a/tools/testing/selftests/mm/migration.c
>> b/tools/testing/selftests/mm/migration.c
>> index 379581567f27..189d7d9070e8 100644
>> --- a/tools/testing/selftests/mm/migration.c
>> +++ b/tools/testing/selftests/mm/migration.c
>> @@ -15,7 +15,7 @@
>>   #include <time.h>
>>     #define TWOMEG (2<<20)
>> -#define RUNTIME (60)
>> +#define RUNTIME (20)
>>     #define ALIGN(x, a) (((x) + (a - 1)) & (~((a) - 1)))
>>   @@ -118,6 +118,7 @@ TEST_F_TIMEOUT(migration, private_anon, 2*RUNTIME)
>>   {
>>       uint64_t *ptr;
>>       int i;
>> +    int ret;
>>         if (self->nthreads < 2 || self->n1 < 0 || self->n2 < 0)
>>           SKIP(return, "Not enough threads or NUMA nodes available");
>> @@ -131,9 +132,10 @@ TEST_F_TIMEOUT(migration, private_anon, 2*RUNTIME)
>>           if (pthread_create(&self->threads[i], NULL, access_mem, ptr))
>>               perror("Couldn't create thread");
>>   -    ASSERT_EQ(migrate(ptr, self->n1, self->n2), 0);
>> +    ret = migrate(ptr, self->n1, self->n2);
>>       for (i = 0; i < self->nthreads - 1; i++)
>>           ASSERT_EQ(pthread_cancel(self->threads[i]), 0);
>> +    ASSERT_EQ(ret, 0);
> 
> Why is that required? This does not involve fork.

It's not required. I was just trying to keep everything aligned to the same pattern.

> 
>>   }
>>     /*
>> @@ -144,6 +146,7 @@ TEST_F_TIMEOUT(migration, shared_anon, 2*RUNTIME)
>>       pid_t pid;
>>       uint64_t *ptr;
>>       int i;
>> +    int ret;
>>         if (self->nthreads < 2 || self->n1 < 0 || self->n2 < 0)
>>           SKIP(return, "Not enough threads or NUMA nodes available");
>> @@ -161,9 +164,10 @@ TEST_F_TIMEOUT(migration, shared_anon, 2*RUNTIME)
>>               self->pids[i] = pid;
>>       }
>>   -    ASSERT_EQ(migrate(ptr, self->n1, self->n2), 0);
>> +    ret = migrate(ptr, self->n1, self->n2);
>>       for (i = 0; i < self->nthreads - 1; i++)
>>           ASSERT_EQ(kill(self->pids[i], SIGTERM), 0);
>> +    ASSERT_EQ(ret, 0);
> 
> 
> Might be cleaner to also:

Or instead of? I agree this is neater, so will undo the moving of the ASSERT()
and rely on this prctl.

> 
> diff --git a/tools/testing/selftests/mm/migration.c
> b/tools/testing/selftests/mm/migration.c
> index 379581567f27..b3f12b9847ec 100644
> --- a/tools/testing/selftests/mm/migration.c
> +++ b/tools/testing/selftests/mm/migration.c
> @@ -11,6 +11,7 @@
>  #include <numaif.h>
>  #include <sys/mman.h>
>  #include <sys/types.h>
> +#include <sys/prctl.h>
>  #include <signal.h>
>  #include <time.h>
> 
> @@ -155,10 +156,12 @@ TEST_F_TIMEOUT(migration, shared_anon, 2*RUNTIME)
>         memset(ptr, 0xde, TWOMEG);
>         for (i = 0; i < self->nthreads - 1; i++) {
>                 pid = fork();
> -               if (!pid)
> +               if (!pid) {
> +                       prctl(PR_SET_PDEATHSIG, SIGHUP);
>                         access_mem(ptr);
> -               else
> +               } else {
>                         self->pids[i] = pid;
> +               }
>         }
> 
>         ASSERT_EQ(migrate(ptr, self->n1, self->n2), 0);
> 
> 
> Then, whenever the parent dies, all child processes get zapped.
> 
> 


  reply	other threads:[~2023-07-18 10:49 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17 10:31 [PATCH v2 0/8] selftests/mm fixes for arm64 Ryan Roberts
2023-07-17 10:31 ` [PATCH v2 1/8] selftests: Line buffer test program's stdout Ryan Roberts
2023-07-17 17:22   ` Mark Brown
2023-07-17 10:31 ` [PATCH v2 2/8] selftests/mm: Skip soft-dirty tests on arm64 Ryan Roberts
2023-07-17 17:20   ` David Hildenbrand
2023-07-17 10:31 ` [PATCH v2 3/8] selftests/mm: Enable mrelease_test for arm64 Ryan Roberts
2023-07-17 10:31 ` [PATCH v2 4/8] selftests/mm: Fix thuge-gen test bugs Ryan Roberts
2023-07-17 17:22   ` David Hildenbrand
2023-07-17 10:31 ` [PATCH v2 5/8] selftests/mm: va_high_addr_switch should skip unsupported arm64 configs Ryan Roberts
2023-07-17 10:31 ` [PATCH v2 6/8] selftests/mm: Make migration test robust to failure Ryan Roberts
2023-07-17 17:40   ` David Hildenbrand
2023-07-18 10:49     ` Ryan Roberts [this message]
2023-07-18 11:23       ` David Hildenbrand
2023-07-18 11:24         ` David Hildenbrand
2023-07-18 12:42           ` Ryan Roberts
2023-07-18 15:24             ` David Hildenbrand
2023-07-17 10:31 ` [PATCH v2 7/8] selftests/mm: Optionally pass duration to transhuge-stress Ryan Roberts
2023-07-17 17:24   ` David Hildenbrand
2023-07-17 10:31 ` [PATCH v2 8/8] selftests/mm: Run all tests from run_vmtests.sh Ryan Roberts
2023-07-17 17:27   ` David Hildenbrand
2023-07-19 20:45     ` Peter Xu
2023-07-20  8:14       ` Ryan Roberts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2e5baba4-c8ef-9da4-a2d6-3cf383ed05bd@arm.com \
    --to=ryan.roberts@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=broonie@kernel.org \
    --cc=david@redhat.com \
    --cc=jglisse@redhat.com \
    --cc=jhubbard@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=peterx@redhat.com \
    --cc=revest@chromium.org \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox