public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform
@ 2024-11-20 10:59 Soutrik Mukhopadhyay
  2024-11-20 10:59 ` [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes Soutrik Mukhopadhyay
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Soutrik Mukhopadhyay @ 2024-11-20 10:59 UTC (permalink / raw)
  To: andersson, konradybcio, robh, krzk+dt, conor+dt
  Cc: Soutrik Mukhopadhyay, linux-arm-msm, devicetree, linux-kernel,
	quic_riteshk, quic_vproddut, quic_abhinavk

This series adds the DPTX0 and DPTX1 nodes, as a part of mdss0
on Qualcomm SA8775P SoC. It also enables Display Port on Qualcomm
SA8775P-ride platform.

---
This patch depends on following series:
https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@quicinc.com/
https://lore.kernel.org/all/20241019-patchv3_1-v5-0-d2fb72c9a845@quicinc.com/
https://lore.kernel.org/all/20241018070706.28980-1-quic_mukhopad@quicinc.com/

v2: Fixed review comments from Dmitry, Konrad and Bjorn
	- Added a new patchset to separate out the soc and board parts.[Konrad]
	- Patchset 1 now comprises of the soc parts and patchset 2 includes board specific changes.[Bjorn]
	- Patchset 2 enables all the DP ports validated on the sa8775p-ride platform.[Bjorn]
	- Fixed indentation errors in the dtsi file containing the soc information.[Dmitry][Konrad]
	- Updated clocks to be used by respective PHYs.[Dmitry]
	- Added mdss0_dp1 device node.[Dmitry]
	- Updated the names of PHYs using label prefix "mdssM_dpN" for clarity.[Bjorn]
	- Avoided use of referring any label in the board(dts) file in the dtsi(platform) file.[Bjorn]

v3: Fixed review comments from Dmitry and other minor changes to prevent warnings and maintain alignment
	- Added specific DP connector node for each DP port validated in patchset 2.[Dmitry]
	- Updated the reg value to 1 for port 1 under mdss_mdp in patchset 1.
	- Fixed the register address space for mdss0_dp1 and mdss0_dp1_phy in alignment to the 
	  register address space for mdss0_dp0 and mdss0_dp0_phy, in patchset 1.

v4: Fixed review comments from Dmitry
	- Added p1 region to the register set of both mdss_dp0 and mdss_dp1
	  alongside validation of devicetree against DT schema.[Dmitry]

---

Soutrik Mukhopadhyay (2):
  arm64: dts: qcom: sa8775p: add DisplayPort device nodes
  arm64: dts: qcom: sa8775p-ride: Enable Display Port

 arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi |  80 ++++++++
 arch/arm64/boot/dts/qcom/sa8775p.dtsi      | 218 ++++++++++++++++++++-
 2 files changed, 297 insertions(+), 1 deletion(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2024-11-20 11:43 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-11-20 10:59 [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform Soutrik Mukhopadhyay
2024-11-20 10:59 ` [PATCH v4 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes Soutrik Mukhopadhyay
2024-11-20 11:23   ` Dmitry Baryshkov
2024-11-20 10:59 ` [PATCH v4 2/2] arm64: dts: qcom: sa8775p-ride: Enable Display Port Soutrik Mukhopadhyay
2024-11-20 11:12   ` Dmitry Baryshkov
2024-11-20 11:35     ` Soutrik Mukhopadhyay
2024-11-20 11:43       ` Dmitry Baryshkov
2024-11-20 11:06 ` [PATCH v4 0/2] Enable Display Port for Qualcomm SA8775P-ride platform Dmitry Baryshkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox