From: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
To: Bryan O'Donoghue <bod@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, kernel test robot <lkp@intel.com>
Subject: Re: [PATCH v3 1/3] media: uapi: Introduce new control for video encoder ROI
Date: Wed, 5 Aug 2026 09:37:11 -0700 [thread overview]
Message-ID: <320d38b1-1ef4-4f5e-91af-cad1cec59cd0@oss.qualcomm.com> (raw)
In-Reply-To: <c590fac2-5c41-4b34-88af-fb00e83b8575@kernel.org>
On 8/4/2026 8:49 PM, Bryan O'Donoghue wrote:
> On 04/08/2026 21:05, Deepa Guthyappa Madivalara wrote:
>> Add custom control, V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP for
>> video encoder Region of Interest to allow applications to specify
>> different quality levels for specific regions in video frames. Define
>> V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE to retrieve supported MB size based on
>> codec from the hardware encoder and set the corresponding ROI MB
>> delta_qp
>> map that adjusts quantization relative to the frame QP's base value.
>>
>> This enables use cases like prioritizing quality for faces in video
>> conferencing or important objects in surveillance footage while reducing
>> bitrate for less critical areas.
>>
>> Signed-off-by: Deepa Guthyappa Madivalara
>> <deepa.madivalara@oss.qualcomm.com>
>> ---
>> .../userspace-api/media/v4l/ext-ctrls-codec.rst | 19
>> +++++++++++++++++++
>> .../media/v4l/videodev2.h.rst.exceptions | 1 +
>> .../userspace-api/media/v4l/vidioc-g-ext-ctrls.rst | 4 ++++
>> .../userspace-api/media/v4l/vidioc-queryctrl.rst | 6 ++++++
>> include/media/v4l2-ctrls.h | 1 +
>> include/uapi/linux/v4l2-controls.h | 2 ++
>> include/uapi/linux/videodev2.h | 3 +++
>> 7 files changed, 36 insertions(+)
>>
>> diff --git
>> a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> index
>> ab865a1a6ba929f1725ce2ab0fd3aeee4a69329a..0f8179de8f742253a5152231592fb8b4355298f7
>> 100644
>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> @@ -1674,6 +1674,25 @@ enum
>> v4l2_mpeg_video_h264_hierarchical_coding_type -
>> Codecs need to always use the specified range, rather then a HW
>> custom range.
>> Applicable to encoders
>>
>> +``V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP (__s8)``
>> + This custom control is used to set ROI MB map delta_Qp for whole
>> frame.
>
> "a whole frame" or "the whole frame"
>
Will update to "the whole frame in v4"
>> + The frame is divided into a grid of MB Size by MB Size pixels
>> (MB Size is
>> + obtained from querying ``V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE``).
>> Each block
>> + is configured with delta_Qp in raster order. The valid range for
>> delta_Qp
>> + is encoder dependent.
>> + Applicable to encoders.
>> +
>> +``V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE`` (integer)
>> + A read-only control that reports the MB Size used for the ROI
>> delta_QP map.
>> + The supported MB Size depends on the encoder codec.
>> + Only square macroblocks are supported. The value returned
>> represents the
>
> macro-blocks ?
I will use MBs to keep it consistent. (in v4)
>
>> + width and height of each block in pixels. The ROI delta_QP map
>> provided
>> + through the ROI control must use the MB Size reported by this
>> control.
>> + The number of entries in the ROI delta_QP array is determined by
>> the
>> + frame dimensions and the reported MB Size. For example, for a
>> QCIF frame
>> + (176x144) if reported MB Size is 16, the delta_QP array must
>> contain
>> + 99 entries (176 x 144 / 16 x 16).
>> +
>> .. raw:: latex
>>
>> \normalsize
>> diff --git
>> a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> index
>> 6182b4e2d2ee002c0d3562e1cc3bc2fd9c4286d6..b036ed3ec2f0744175cad1cbc4e73fe828e0c955
>> 100644
>> --- a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> +++ b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions
>> @@ -141,6 +141,7 @@ replace symbol V4L2_CTRL_TYPE_STRING
>> :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_U16 :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_U32 :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_U8 :c:type:`V4L.v4l2_ctrl_type`
>> +replace symbol V4L2_CTRL_TYPE_S8 :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_MPEG2_SEQUENCE
>> :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_MPEG2_PICTURE
>> :c:type:`V4L.v4l2_ctrl_type`
>> replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTISATION
>> :c:type:`V4L.v4l2_ctrl_type`
>> diff --git
>> a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> index
>> d78328152b7552f8f0d30a9e2f7c104bfd4b70d3..fe5f8992389c32d8f35f432229ef2f734002644e
>> 100644
>> --- a/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> +++ b/Documentation/userspace-api/media/v4l/vidioc-g-ext-ctrls.rst
>> @@ -188,6 +188,10 @@ still cause this situation.
>> - ``p_u32``
>> - A pointer to a matrix control of unsigned 32-bit values.
>> Valid if
>> this control is of type ``V4L2_CTRL_TYPE_U32``.
>> + * - __s8 *
>> + - ``p_s8``
>> + - A pointer to a matrix control of signed 8-bit values. Valid if
>> + this control is of type ``V4L2_CTRL_TYPE_S8``.
>> * - __s32 *
>> - ``p_s32``
>> - A pointer to a matrix control of signed 32-bit values.
>> Valid if
>> diff --git
>> a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> index
>> 82c8b52e771ce9301491b3f752e501a8fe7e2434..57e1652ae72e0324742142446acf32a16b94941c
>> 100644
>> --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst
>> @@ -425,6 +425,12 @@ See also the examples in :ref:`control`.
>> - any
>> - An unsigned 32-bit valued control ranging from minimum to
>> maximum
>> inclusive. The step value indicates the increment between values.
>> + * - ``V4L2_CTRL_TYPE_S8``
>> + - any
>> + - any
>> + - any
>> + - A signed 8-bit valued control ranging from minimum to maximum
>> + inclusive. The step value indicates the increment between values.
>> * - ``V4L2_CTRL_TYPE_MPEG2_QUANTISATION``
>> - n/a
>> - n/a
>> diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
>> index
>> 327976b14d50b73a631e4d2ed95d9f4d146c45ab..a1806ddbc797efa52e83cd3f685ef70d5b5483d2
>> 100644
>> --- a/include/media/v4l2-ctrls.h
>> +++ b/include/media/v4l2-ctrls.h
>> @@ -64,6 +64,7 @@ union v4l2_ctrl_ptr {
>> s32 *p_s32;
>> s64 *p_s64;
>> u8 *p_u8;
>> + s8 *p_s8;
>> u16 *p_u16;
>> u32 *p_u32;
>> char *p_char;
>> diff --git a/include/uapi/linux/v4l2-controls.h
>> b/include/uapi/linux/v4l2-controls.h
>> index
>> affec0ab4781507be761cb791ff737460acf9cb7..00a2c48630bd198faa9a2b833a9aa346d8357555
>> 100644
>> --- a/include/uapi/linux/v4l2-controls.h
>> +++ b/include/uapi/linux/v4l2-controls.h
>> @@ -920,6 +920,8 @@ enum v4l2_mpeg_video_av1_level {
>> };
>>
>> #define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657)
>> +#define V4L2_CID_MPEG_VIDEO_ROI_MB_DELTA_QP (V4L2_CID_CODEC_BASE + 658)
>> +#define V4L2_CID_MPEG_VIDEO_ROI_MB_SIZE (V4L2_CID_CODEC_BASE + 659)
>>
>> /* MPEG-class control IDs specific to the CX2341x driver as
>> defined by V4L2 */
>> #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000)
>> diff --git a/include/uapi/linux/videodev2.h
>> b/include/uapi/linux/videodev2.h
>> index
>> 5373dba640fae3d19247ab1c74ba336e05dc0fe0..3ed343f8c81e0c9240d5a7e5b2dfe365a529fb6c
>> 100644
>> --- a/include/uapi/linux/videodev2.h
>> +++ b/include/uapi/linux/videodev2.h
>> @@ -1884,6 +1884,7 @@ struct v4l2_ext_control {
>> __s64 value64;
>> char __user *string;
>> __u8 __user *p_u8;
>> + __s8 __user *p_s8;
>> __u16 __user *p_u16;
>> __u32 __user *p_u32;
>> __s32 __user *p_s32;
>> @@ -1961,6 +1962,7 @@ enum v4l2_ctrl_type {
>> V4L2_CTRL_TYPE_U8 = 0x0100,
>> V4L2_CTRL_TYPE_U16 = 0x0101,
>> V4L2_CTRL_TYPE_U32 = 0x0102,
>> + V4L2_CTRL_TYPE_S8 = 0x0103,
>> V4L2_CTRL_TYPE_AREA = 0x0106,
>> V4L2_CTRL_TYPE_RECT = 0x0107,
>>
>> @@ -1997,6 +1999,7 @@ enum v4l2_ctrl_type {
>> V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY = 0x281,
>> V4L2_CTRL_TYPE_AV1_FRAME = 0x282,
>> V4L2_CTRL_TYPE_AV1_FILM_GRAIN = 0x283,
>> +
>
> stray \n
>
sorry, will fix this in v4
>> };
>>
>> /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
>>
>> --
>> 2.34.1
>>
>
next prev parent reply other threads:[~2026-08-05 16:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <_l91CrDl1TZCUzjX1JcRr1cgRM6CNFGa4eRe52VgXTUOOcx8yjj9YCeBaulfAgFkrnN6fCpZfpCIilkjdOV_JA==@protonmail.internalid>
2026-08-04 20:05 ` [PATCH v3 0/3] Implement Region of Interest(ROI) support Deepa Guthyappa Madivalara
2026-08-04 20:05 ` [PATCH v3 1/3] media: uapi: Introduce new control for video encoder ROI Deepa Guthyappa Madivalara
2026-08-05 3:49 ` Bryan O'Donoghue
2026-08-05 16:37 ` Deepa Guthyappa Madivalara [this message]
2026-08-04 20:05 ` [PATCH v3 2/3] media: v4l2-core: Add support for video encoder ROI control Deepa Guthyappa Madivalara
2026-08-05 3:51 ` Bryan O'Donoghue
2026-08-05 16:37 ` Deepa Guthyappa Madivalara
2026-08-04 20:05 ` [PATCH v3 3/3] media: iris: Add ROI support framework for iris video encoder Deepa Guthyappa Madivalara
2026-08-05 4:06 ` Bryan O'Donoghue
2026-08-06 18:36 ` Deepa Guthyappa Madivalara
2026-08-05 4:09 ` [PATCH v3 0/3] Implement Region of Interest(ROI) support Bryan O'Donoghue
2026-08-05 16:39 ` Deepa Guthyappa Madivalara
2026-08-06 5:24 ` Vikash Garodia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=320d38b1-1ef4-4f5e-91af-cad1cec59cd0@oss.qualcomm.com \
--to=deepa.madivalara@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=bod@kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lkp@intel.com \
--cc=mchehab@kernel.org \
--cc=vikash.garodia@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox