Re: [PATCH 0/7] Baisc devicetree support for Amlogic S6 S7 and S7D

[Xianwei Zhao <xianwei.zhao@amlogic.com>]

Hi Neil,
    Thanks for your reply.

On 2025/4/23 15:23, neil.armstrong@linaro.org wrote:
> [ EXTERNAL EMAIL ]
> 
> Hi,
> 
> On 23/04/2025 08:15, Xianwei Zhao wrote:
>> Hi Neil,
>>     Thanks for your reply.
>>
>> On 2025/4/22 21:49, Neil Armstrong wrote:
>>> [ EXTERNAL EMAIL ]
>>>
>>> Hi,
>>>
>>> On 22/04/2025 13:45, Xianwei Zhao wrote:
>>>> Hi Neil,
>>>>     A gentle ping, thanks.
>>>
>>> I'll apply them this week except patch 4,
>>>
>>> so can you send patch 4 separately since it goes via the tty tree ?
>>>
>>
>> I will send patch 4 separately.
>> The following patches(5 6 7) can be not included for now. Without the 
>> patch 4, the command "make ARCH=arm64 dtbs_check W=1" will fail to 
>> execute.
> 
> I know, but since it's reviewed, Greg KH will pick it for the next 
> release so it's fine.
> 

I have already sent patch 4 separately. From Rob's reply, do you think 
it can be picked up together?

https://lore.kernel.org/all/CAL_JsqKD=yespd0WM90VBr_XWdppimzDzecmwNfGMV+hNSHuRA@mail.gmail.com/

> Neil
> 
>>
>>> Thanks,
>>> Neil
>>>
>>>>
>>>> On 2025/3/17 15:16, Xianwei Zhao via B4 Relay wrote:
>>>>> [ EXTERNAL EMAIL ]
>>>>>
>>>>> Amlogic S6 S7 and S7D are application processors designed for
>>>>> hybrid OTT/IP Set Top Box and high-end media box applications.
>>>>>
>>>>> Add the new S6 SoC/board device tree bindings.
>>>>> Add the new S7 SoC/board device tree bindings.
>>>>> Add the new S7D SoC/board device tree bindings.
>>>>>
>>>>> Add basic support for the S6 based Amlogic BL209 board, which 
>>>>> describes
>>>>> the following components: CPU, GIC, IRQ, Timer and UART. These are 
>>>>> capable of
>>>>> booting up into the serial console.
>>>>>
>>>>> Add basic support for the S7 based Amlogic BP201 board, which 
>>>>> describes
>>>>> the following components: CPU, GIC, IRQ, Timer and UART. These are 
>>>>> capable of
>>>>> booting up into the serial console.
>>>>>
>>>>> Add basic support for the S7D based Amlogic BM202 board, which 
>>>>> describes
>>>>> the following components: CPU, GIC, IRQ, Timer and UART. These are 
>>>>> capable of
>>>>> booting up into the serial console.
>>>>>
>>>>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>>> ---
>>>>> Xianwei Zhao (7):
>>>>>        dt-bindings: arm: amlogic: add S6 support
>>>>>        dt-bindings: arm: amlogic: add S7 support
>>>>>        dt-bindings: arm: amlogic: add S7D support
>>>>>        dt-bindings: serial: amlogic,meson-uart: Add compatible 
>>>>> string for S6/S7/S7D
>>>>>        arm64: dts: add support for S6 based Amlogic BL209
>>>>>        arm64: dts: add support for S7 based Amlogic BP201
>>>>>        arm64: dts: add support for S7D based Amlogic BM202
>>>>>
>>>>>   Documentation/devicetree/bindings/arm/amlogic.yaml | 18 ++++
>>>>>   .../bindings/serial/amlogic,meson-uart.yaml        |  3 +
>>>>>   arch/arm64/boot/dts/amlogic/Makefile               |  3 +
>>>>>   .../boot/dts/amlogic/amlogic-s6-s905x5-bl209.dts   | 42 +++++++++
>>>>>   arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi        | 97 
>>>>> +++++++++++++++++++++
>>>>>   .../boot/dts/amlogic/amlogic-s7-s805x3-bp201.dts   | 41 +++++++++
>>>>>   arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi        | 99 
>>>>> ++++++++++++++++++++++
>>>>>   .../boot/dts/amlogic/amlogic-s7d-s905x5m-bm202.dts | 41 +++++++++
>>>>>   arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi       | 99 
>>>>> ++++++++++++++++++++++
>>>>>   9 files changed, 443 insertions(+)
>>>>> ---
>>>>> base-commit: 73e4ffb27bb8a093d557bb2dac1a271474cca99c
>>>>> change-id: 20250221-s6-s7-basic-f300c30877e6
>>>>>
>>>>> Best regards,
>>>>> -- 
>>>>> Xianwei Zhao <xianwei.zhao@amlogic.com>
>>>>>
>>>>>
>>>
>