Re: [PATCH v6 6/8] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280

[Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>]

On 4/14/2023 9:15 PM, Andrew Halaney wrote:
> On Wed, Apr 05, 2023 at 06:27:57PM +0530, Krishna Kurapati wrote:
>> Add USB and DWC3 node for tertiary port of SC8280 along with multiport
>> IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride
>> platforms.
>>
>> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
>> ---
>> Link to v5: https://lore.kernel.org/all/20230310163420.7582-7-quic_kriskura@quicinc.com/
>>
>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 58 ++++++++++++++++++++++++++
>>   1 file changed, 58 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index 42bfa9fa5b96..7b81f2b0449d 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -3108,6 +3108,64 @@ usb_1_role_switch: endpoint {
>>   			};
>>   		};
>>   
>> +		usb_2: usb@a4f8800 {
>> +			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
>> +			reg = <0 0x0a4f8800 0 0x400>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +
>> +			clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>,
>> +				 <&gcc GCC_USB30_MP_MASTER_CLK>,
>> +				 <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>,
>> +				 <&gcc GCC_USB30_MP_SLEEP_CLK>,
>> +				 <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
>> +				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
>> +			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
>> +				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
>> +
>> +			assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>,
>> +					  <&gcc GCC_USB30_MP_MASTER_CLK>;
>> +			assigned-clock-rates = <19200000>, <200000000>;
>> +
>> +			interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>,
>> +						<&pdc 126 IRQ_TYPE_EDGE_RISING>,
>> +						<&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			interrupt-names = "dp_hs_phy_irq", "dm_hs_phy_irq",
>> +						"ss_phy_irq";
>> +
> 
> This is breaking the current schema (with the full series applied),
> I am not sure if a pwr_event IRQ exists or but it maybe necessary to
> modify qcom,dwc3.yaml in order to explain hardware if it doesn't exist:
> 
> (dtschema) ahalaney@halaney-x13s ~/git/linux-next (git)-[718f2024524f] % make CHECK_DTBS=y DT_SCHEMA_FILES=/usb/qcom,dwc3.yaml qcom/sa8540p-ride.dtb                                                                                   :(
>    LINT    Documentation/devicetree/bindings
>    CHKDT   Documentation/devicetree/bindings/processed-schema.json
>    SCHEMA  Documentation/devicetree/bindings/processed-schema.json
>    DTC_CHK arch/arm64/boot/dts/qcom/sa8540p-ride.dtb
> /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names:0: 'pwr_event' was expected
> 	From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names:1: 'dp_hs_phy_irq' was expected
> 	From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names:2: 'dm_hs_phy_irq' was expected
> 	From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupt-names: ['dp_hs_phy_irq', 'dm_hs_phy_irq', 'ss_phy_irq'] is too short
> 	From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> /home/ahalaney/git/linux-next/arch/arm64/boot/dts/qcom/sa8540p-ride.dtb: usb@a4f8800: interrupts-extended: [[99, 127, 1], [99, 126, 1], [99, 16, 4]] is too short
> 	From schema: /home/ahalaney/git/linux-next/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> make CHECK_DTBS=y DT_SCHEMA_FILES=/usb/qcom,dwc3.yaml qcom/sa8540p-ride.dtb  22.61s user 0.54s system 99% cpu 23.172 total
> (dtschema) ahalaney@halaney-x13s ~/git/linux-next (git)-[718f2024524f] %
> 
> Thanks,
> Andrew
> 

Hi Andrew,

  Thanks for pointing it out. Let me check and get back on the 
pwr_event_irq.

Probably I might have missed it 😅. If so, will make sure to add it in 
next version.

Regards,
Krishna,