[PATCH v2 1/3] phy: rockchip-dp: should be a child device of the GRF

[PATCH v2 1/3] phy: rockchip-dp: should be a child device of the GRF

[Heiko Stuebner]

The displayport-phy is fully enclosed in the general register files (GRF).
Therefore as seen from the device-tree it shouldn't be a separate platform-
device but instead a sub-device of the GRF - using the simply-mfd mechanism.

The driver entered the kernel in the current merge-window, so we can still
adapt the binding without needing a fallback, as the binding hasn't been
released with a full kernel yet.

While the edp phy is fully part of the GRF, it doesn't have any separate
register set there, so doesn't get any register-area assigned.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
While one of my intermediate versions did include that conversion
already, it looks like it was lost when the dp-phy got split out into
its own series and I missed that dropped change.

As mentioned in the patch description above, this is meant as a fixup for
kernel 4.6.

 .../devicetree/bindings/phy/rockchip-dp-phy.txt        | 18 +++++++++++-------
 drivers/phy/phy-rockchip-dp.c                          |  7 +++++--
 2 files changed, 16 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
index 50c4f9b..e3b4809 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
@@ -8,15 +8,19 @@ Required properties:
 	of memory mapped region.
 - clock-names: from common clock binding:
 	Required elements: "24m"
-- rockchip,grf: phandle to the syscon managing the "general register files"
 - #phy-cells : from the generic PHY bindings, must be 0;
 
 Example:
 
-edp_phy: edp-phy {
-	compatible = "rockchip,rk3288-dp-phy";
-	rockchip,grf = <&grf>;
-	clocks = <&cru SCLK_EDP_24M>;
-	clock-names = "24m";
-	#phy-cells = <0>;
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
+
+...
+
+	edp_phy: edp-phy {
+		compatible = "rockchip,rk3288-dp-phy";
+		clocks = <&cru SCLK_EDP_24M>;
+		clock-names = "24m";
+		#phy-cells = <0>;
+	};
 };
diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
index 77e2d02..793ecb6 100644
--- a/drivers/phy/phy-rockchip-dp.c
+++ b/drivers/phy/phy-rockchip-dp.c
@@ -86,6 +86,9 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev)
 	if (!np)
 		return -ENODEV;
 
+	if (!dev->parent || !dev->parent->of_node)
+		return -ENODEV;
+
 	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
 	if (IS_ERR(dp))
 		return -ENOMEM;
@@ -104,9 +107,9 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	dp->grf = syscon_node_to_regmap(dev->parent->of_node);
 	if (IS_ERR(dp->grf)) {
-		dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
+		dev_err(dev, "rk3288-dp needs the General Register Files syscon\n");
 		return PTR_ERR(dp->grf);
 	}
 
-- 
2.7.0

[PATCH v2 2/3] phy: rockchip-emmc: should be a child device of the GRF

[Heiko Stuebner]

The emmc-phy is fully enclosed in the general register files (GRF).
Therefore as seen from the device-tree it shouldn't be a separate platform-
device but instead a sub-device of the GRF - using the simply-mfd mechanism.

The driver entered the kernel in the current merge-window, so we can still
adapt the binding without needing a fallback, as the binding hasn't been
released with a full kernel yet.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
Hi Shawn, Kishon,

I didn't see this new phy driver until now, so I'd really like to get
this sorted before the old binding solidifies :-).

I'll convert the usbphy as well, but that has to have the fallback for
the old binding, so is not as urgent as these two.

As mentioned in the patch description above, this is meant as a fixup for
kernel 4.6.


changes in v2: drop forgotten rockchip,grf from example


 .../devicetree/bindings/phy/rockchip-emmc-phy.txt     | 19 ++++++++++++-------
 drivers/phy/phy-rockchip-emmc.c                       |  5 ++++-
 2 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 61916f1..d711259 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -3,17 +3,21 @@ Rockchip EMMC PHY
 
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
- - rockchip,grf : phandle to the syscon managing the "general
-   register files"
  - #phy-cells: must be 0
  - reg: PHY configure reg address offset in "general
    register files"
 
 Example:
 
-emmcphy: phy {
-	compatible = "rockchip,rk3399-emmc-phy";
-	rockchip,grf = <&grf>;
-	reg = <0xf780>;
-	#phy-cells = <0>;
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+
+...
+
+	emmcphy: phy@f780 {
+		compatible = "rockchip,rk3399-emmc-phy";
+		reg = <0xf780>;
+		#phy-cells = <0>;
+	};
 };
diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
index 887b4c2..6ebcf3e 100644
--- a/drivers/phy/phy-rockchip-emmc.c
+++ b/drivers/phy/phy-rockchip-emmc.c
@@ -176,7 +176,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
 	struct regmap *grf;
 	unsigned int reg_offset;
 
-	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	if (!dev->parent || !dev->parent->of_node)
+		return -ENODEV;
+
+	grf = syscon_node_to_regmap(dev->parent->of_node);
 	if (IS_ERR(grf)) {
 		dev_err(dev, "Missing rockchip,grf property\n");
 		return PTR_ERR(grf);
-- 
2.7.0

Re: [PATCH v2 2/3] phy: rockchip-emmc: should be a child device of the GRF

[Rob Herring]

On Thu, Mar 24, 2016 at 10:29:02PM +0100, Heiko Stuebner wrote:
> The emmc-phy is fully enclosed in the general register files (GRF).
> Therefore as seen from the device-tree it shouldn't be a separate platform-
> device but instead a sub-device of the GRF - using the simply-mfd mechanism.
> 
> The driver entered the kernel in the current merge-window, so we can still
> adapt the binding without needing a fallback, as the binding hasn't been
> released with a full kernel yet.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> Hi Shawn, Kishon,
> 
> I didn't see this new phy driver until now, so I'd really like to get
> this sorted before the old binding solidifies :-).
> 
> I'll convert the usbphy as well, but that has to have the fallback for
> the old binding, so is not as urgent as these two.
> 
> As mentioned in the patch description above, this is meant as a fixup for
> kernel 4.6.
> 
> 
> changes in v2: drop forgotten rockchip,grf from example
> 
> 
>  .../devicetree/bindings/phy/rockchip-emmc-phy.txt     | 19 ++++++++++++-------
>  drivers/phy/phy-rockchip-emmc.c                       |  5 ++++-
>  2 files changed, 16 insertions(+), 8 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 2/3] phy: rockchip-emmc: should be a child device of the GRF

[Shawn Lin]

在 2016/3/25 5:29, Heiko Stuebner 写道:
> The emmc-phy is fully enclosed in the general register files (GRF).
> Therefore as seen from the device-tree it shouldn't be a separate platform-
> device but instead a sub-device of the GRF - using the simply-mfd mechanism.
>
> The driver entered the kernel in the current merge-window, so we can still
> adapt the binding without needing a fallback, as the binding hasn't been
> released with a full kernel yet.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> Hi Shawn, Kishon,
>
> I didn't see this new phy driver until now, so I'd really like to get
> this sorted before the old binding solidifies :-).
>
> I'll convert the usbphy as well, but that has to have the fallback for
> the old binding, so is not as urgent as these two.
>
> As mentioned in the patch description above, this is meant as a fixup for
> kernel 4.6.
>
>

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> changes in v2: drop forgotten rockchip,grf from example
>
>
>   .../devicetree/bindings/phy/rockchip-emmc-phy.txt     | 19 ++++++++++++-------
>   drivers/phy/phy-rockchip-emmc.c                       |  5 ++++-
>   2 files changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> index 61916f1..d711259 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> @@ -3,17 +3,21 @@ Rockchip EMMC PHY
>
>   Required properties:
>    - compatible: rockchip,rk3399-emmc-phy
> - - rockchip,grf : phandle to the syscon managing the "general
> -   register files"
>    - #phy-cells: must be 0
>    - reg: PHY configure reg address offset in "general
>      register files"
>
>   Example:
>
> -emmcphy: phy {
> -	compatible = "rockchip,rk3399-emmc-phy";
> -	rockchip,grf = <&grf>;
> -	reg = <0xf780>;
> -	#phy-cells = <0>;
> +
> +grf: syscon@ff770000 {
> +	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
> +
> +...
> +
> +	emmcphy: phy@f780 {
> +		compatible = "rockchip,rk3399-emmc-phy";
> +		reg = <0xf780>;
> +		#phy-cells = <0>;
> +	};
>   };
> diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c
> index 887b4c2..6ebcf3e 100644
> --- a/drivers/phy/phy-rockchip-emmc.c
> +++ b/drivers/phy/phy-rockchip-emmc.c
> @@ -176,7 +176,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
>   	struct regmap *grf;
>   	unsigned int reg_offset;
>
> -	grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
> +	if (!dev->parent || !dev->parent->of_node)
> +		return -ENODEV;
> +
> +	grf = syscon_node_to_regmap(dev->parent->of_node);
>   	if (IS_ERR(grf)) {
>   		dev_err(dev, "Missing rockchip,grf property\n");
>   		return PTR_ERR(grf);
>


-- 
Best Regards
Shawn Lin

[PATCH v2 3/3] phy: rockchip-emmc: adapt binding to specifiy register offset and length

[Heiko Stuebner]

The emmc-phy occupies a contiguous set of 8 registers inside the general
register files, so the reg property should specify this.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
This is essential a counter argument for Shawn's move from reg to reg_offset
in "phy: rockchip-emmc: fix compile issue on arm64 platform" [0].
With the move under the grf we now also are able to specify this stuff
cleanly using already present mechanisms.

Also meant to v4.6-rc before the binding solidifies.


[0] https://lkml.org/lkml/2016/3/8/114

 Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index 461e958..555cb0f 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -4,7 +4,7 @@ Rockchip EMMC PHY
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
  - #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
    register files"
 
 Example:
@@ -12,12 +12,14 @@ Example:
 
 grf: syscon@ff770000 {
 	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 ...
 
 	emmcphy: phy@f780 {
 		compatible = "rockchip,rk3399-emmc-phy";
-		reg = <0xf780>;
+		reg = <0xf780 0x20>;
 		#phy-cells = <0>;
 	};
 };
-- 
2.7.0

Re: [PATCH v2 3/3] phy: rockchip-emmc: adapt binding to specifiy register offset and length

[Rob Herring]

On Thu, Mar 24, 2016 at 10:29:03PM +0100, Heiko Stuebner wrote:
> The emmc-phy occupies a contiguous set of 8 registers inside the general
> register files, so the reg property should specify this.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> This is essential a counter argument for Shawn's move from reg to reg_offset
> in "phy: rockchip-emmc: fix compile issue on arm64 platform" [0].
> With the move under the grf we now also are able to specify this stuff
> cleanly using already present mechanisms.
> 
> Also meant to v4.6-rc before the binding solidifies.
> 
> 
> [0] https://lkml.org/lkml/2016/3/8/114
> 
>  Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 3/3] phy: rockchip-emmc: adapt binding to specifiy register offset and length

[Kishon Vijay Abraham I]

Hi,

On Friday 25 March 2016 02:59 AM, Heiko Stuebner wrote:
> The emmc-phy occupies a contiguous set of 8 registers inside the general
> register files, so the reg property should specify this.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> This is essential a counter argument for Shawn's move from reg to reg_offset
> in "phy: rockchip-emmc: fix compile issue on arm64 platform" [0].
> With the move under the grf we now also are able to specify this stuff
> cleanly using already present mechanisms.
> 
> Also meant to v4.6-rc before the binding solidifies.
> 
> 
> [0] https://lkml.org/lkml/2016/3/8/114
> 
>  Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> index 461e958..555cb0f 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> @@ -4,7 +4,7 @@ Rockchip EMMC PHY
>  Required properties:
>   - compatible: rockchip,rk3399-emmc-phy
>   - #phy-cells: must be 0
> - - reg: PHY configure reg address offset in "general
> + - reg: PHY register address offset and length in "general
>     register files"
>  
>  Example:
> @@ -12,12 +12,14 @@ Example:
>  
>  grf: syscon@ff770000 {
>  	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
> +	#address-cells = <1>;
> +	#size-cells = <1>;

This patch is not applying. Care to resend based on linux-phy fixes?

Thanks
Kishon

Re: [PATCH v2 3/3] phy: rockchip-emmc: adapt binding to specifiy register offset and length

[Kishon Vijay Abraham I]

Hi,

On Wednesday 13 April 2016 06:31 PM, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Friday 25 March 2016 02:59 AM, Heiko Stuebner wrote:
>> The emmc-phy occupies a contiguous set of 8 registers inside the general
>> register files, so the reg property should specify this.
>>
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>> This is essential a counter argument for Shawn's move from reg to reg_offset
>> in "phy: rockchip-emmc: fix compile issue on arm64 platform" [0].
>> With the move under the grf we now also are able to specify this stuff
>> cleanly using already present mechanisms.
>>
>> Also meant to v4.6-rc before the binding solidifies.
>>
>>
>> [0] https://lkml.org/lkml/2016/3/8/114
>>
>>  Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 6 ++++--
>>  1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
>> index 461e958..555cb0f 100644
>> --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
>> @@ -4,7 +4,7 @@ Rockchip EMMC PHY
>>  Required properties:
>>   - compatible: rockchip,rk3399-emmc-phy
>>   - #phy-cells: must be 0
>> - - reg: PHY configure reg address offset in "general
>> + - reg: PHY register address offset and length in "general
>>     register files"
>>  
>>  Example:
>> @@ -12,12 +12,14 @@ Example:
>>  
>>  grf: syscon@ff770000 {
>>  	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
> 
> This patch is not applying. Care to resend based on linux-phy fixes?

sorry for the noise. I have applied this to linux-phy fixes now.

Thanks
Kishon

Re: [PATCH v2 1/3] phy: rockchip-dp: should be a child device of the GRF

[Rob Herring]

On Thu, Mar 24, 2016 at 10:29:01PM +0100, Heiko Stuebner wrote:
> The displayport-phy is fully enclosed in the general register files (GRF).
> Therefore as seen from the device-tree it shouldn't be a separate platform-
> device but instead a sub-device of the GRF - using the simply-mfd mechanism.
> 
> The driver entered the kernel in the current merge-window, so we can still
> adapt the binding without needing a fallback, as the binding hasn't been
> released with a full kernel yet.
> 
> While the edp phy is fully part of the GRF, it doesn't have any separate
> register set there, so doesn't get any register-area assigned.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
> While one of my intermediate versions did include that conversion
> already, it looks like it was lost when the dp-phy got split out into
> its own series and I missed that dropped change.
> 
> As mentioned in the patch description above, this is meant as a fixup for
> kernel 4.6.
> 
>  .../devicetree/bindings/phy/rockchip-dp-phy.txt        | 18 +++++++++++-------
>  drivers/phy/phy-rockchip-dp.c                          |  7 +++++--
>  2 files changed, 16 insertions(+), 9 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 1/3] phy: rockchip-dp: should be a child device of the GRF

[Yakir Yang]

Hi Heiko,

On 03/25/2016 05:29 AM, Heiko Stuebner wrote:
> The displayport-phy is fully enclosed in the general register files (GRF).
> Therefore as seen from the device-tree it shouldn't be a separate platform-
> device but instead a sub-device of the GRF - using the simply-mfd mechanism.
>
> The driver entered the kernel in the current merge-window, so we can still
> adapt the binding without needing a fallback, as the binding hasn't been
> released with a full kernel yet.
>
> While the edp phy is fully part of the GRF, it doesn't have any separate
> register set there, so doesn't get any register-area assigned.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Thanks for your improved.

Reviewed-by: Yakir Yang <ykk@rock-chips.com>
> ---
> While one of my intermediate versions did include that conversion
> already, it looks like it was lost when the dp-phy got split out into
> its own series and I missed that dropped change.
>
> As mentioned in the patch description above, this is meant as a fixup for
> kernel 4.6.
>
>   .../devicetree/bindings/phy/rockchip-dp-phy.txt        | 18 +++++++++++-------
>   drivers/phy/phy-rockchip-dp.c                          |  7 +++++--
>   2 files changed, 16 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> index 50c4f9b..e3b4809 100644
> --- a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> @@ -8,15 +8,19 @@ Required properties:
>   	of memory mapped region.
>   - clock-names: from common clock binding:
>   	Required elements: "24m"
> -- rockchip,grf: phandle to the syscon managing the "general register files"
>   - #phy-cells : from the generic PHY bindings, must be 0;
>   
>   Example:
>   
> -edp_phy: edp-phy {
> -	compatible = "rockchip,rk3288-dp-phy";
> -	rockchip,grf = <&grf>;
> -	clocks = <&cru SCLK_EDP_24M>;
> -	clock-names = "24m";
> -	#phy-cells = <0>;
> +grf: syscon@ff770000 {
> +	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
> +
> +...
> +
> +	edp_phy: edp-phy {
> +		compatible = "rockchip,rk3288-dp-phy";
> +		clocks = <&cru SCLK_EDP_24M>;
> +		clock-names = "24m";
> +		#phy-cells = <0>;
> +	};
>   };
> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
> index 77e2d02..793ecb6 100644
> --- a/drivers/phy/phy-rockchip-dp.c
> +++ b/drivers/phy/phy-rockchip-dp.c
> @@ -86,6 +86,9 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev)
>   	if (!np)
>   		return -ENODEV;
>   
> +	if (!dev->parent || !dev->parent->of_node)
> +		return -ENODEV;
> +
>   	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
>   	if (IS_ERR(dp))
>   		return -ENOMEM;
> @@ -104,9 +107,9 @@ static int rockchip_dp_phy_probe(struct platform_device *pdev)
>   		return ret;
>   	}
>   
> -	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> +	dp->grf = syscon_node_to_regmap(dev->parent->of_node);
>   	if (IS_ERR(dp->grf)) {
> -		dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
> +		dev_err(dev, "rk3288-dp needs the General Register Files syscon\n");
>   		return PTR_ERR(dp->grf);
>   	}
>   

Re: [PATCH v2 1/3] phy: rockchip-dp: should be a child device of the GRF

[Heiko Stuebner]

Hi Kishon,

Am Donnerstag, 24. März 2016, 22:29:01 schrieb Heiko Stuebner:
> The displayport-phy is fully enclosed in the general register files (GRF).
> Therefore as seen from the device-tree it shouldn't be a separate
> platform- device but instead a sub-device of the GRF - using the
> simply-mfd mechanism.
> 
> The driver entered the kernel in the current merge-window, so we can still
> adapt the binding without needing a fallback, as the binding hasn't been
> released with a full kernel yet.
> 
> While the edp phy is fully part of the GRF, it doesn't have any separate
> register set there, so doesn't get any register-area assigned.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

could you please look at taking these patches into the 4.6-rc kernel as fixes 
please. I'd really like to not having to keep the old interface around and 
currently we still can just convert without keeping backward compatibility.


Thanks
Heiko