From: "Martin J. Bligh" <Martin.Bligh@us.ibm.com>
To: Linus Torvalds <torvalds@transmeta.com>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH] NUMA-Q disable irqbalance
Date: Mon, 05 Aug 2002 16:51:34 -0700 [thread overview]
Message-ID: <349030000.1028591494@flay> (raw)
This patch is from Matt Dobson. It disables irq_balance for the NUMA-Q
and makes it a config option for everyone else. This is needed for NUMA-Q
to work, since the irq_balance code assumes a logical flat apic addressing
mode that's not true in all cases. We created a config option since
irq_balance makes performance significantly worse for some workloads.
Please apply,
Martin.
diff -Nur linux-2.5.25-vanilla/arch/i386/Config.help linux-2.5.25-patched/arch/i386/Config.help
--- linux-2.5.25-vanilla/arch/i386/Config.help Fri Jul 5 16:42:04 2002
+++ linux-2.5.25-patched/arch/i386/Config.help Thu Jul 11 17:27:01 2002
@@ -41,6 +41,12 @@
486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
+CONFIG_IRQ_BALANCE
+ This option is used to turn IRQ Balancing on machines with multiple
+ APIC's (ie: SMP, NUMA, etc) on or off. This behavior has been seen
+ under some conditions to reduce performance, and on some platorms causes
+ interesting hangs, particularly those with more than 8 CPUs.
+
CONFIG_MULTIQUAD
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
multiquad box. This changes the way that processors are bootstrapped,
diff -Nur linux-2.5.25-vanilla/arch/i386/config.in linux-2.5.25-patched/arch/i386/config.in
--- linux-2.5.25-vanilla/arch/i386/config.in Fri Jul 5 16:42:20 2002
+++ linux-2.5.25-patched/arch/i386/config.in Thu Jul 11 17:16:52 2002
@@ -164,8 +164,19 @@
if [ "$CONFIG_X86_UP_IOAPIC" = "y" ]; then
define_bool CONFIG_X86_IO_APIC y
fi
+ define_bool CONFIG_IRQBALANCE n
else
bool 'Multiquad NUMA system' CONFIG_MULTIQUAD
+ if [ "$CONFIG_MULTIQUAD" = "y" ]; then
+ define_bool CONFIG_IRQBALANCE_DISABLE y
+ else
+ bool 'Turn Off IRQ Balancing' CONFIG_IRQBALANCE_DISABLE
+ fi
+ if [ "$CONFIG_IRQBALANCE_DISABLE" = "y" ]; then
+ define_bool CONFIG_IRQBALANCE n
+ else
+ define_bool CONFIG_IRQBALANCE y
+ fi
fi
bool 'Machine Check Exception' CONFIG_X86_MCE
diff -Nur linux-2.5.25-vanilla/arch/i386/kernel/io_apic.c linux-2.5.25-patched/arch/i386/kernel/io_apic.c
--- linux-2.5.25-vanilla/arch/i386/kernel/io_apic.c Fri Jul 5 16:42:20 2002
+++ linux-2.5.25-patched/arch/i386/kernel/io_apic.c Thu Jul 11 16:12:28 2002
@@ -199,7 +199,7 @@
spin_unlock_irqrestore(&ioapic_lock, flags);
}
-#if CONFIG_SMP
+#if CONFIG_IRQBALANCE
typedef struct {
unsigned int cpu;
@@ -211,15 +211,12 @@
extern unsigned long irq_affinity [NR_IRQS];
-#endif
-
#define IDLE_ENOUGH(cpu,now) \
(idle_cpu(cpu) && ((now) - irq_stat[(cpu)].idle_timestamp > 1))
#define IRQ_ALLOWED(cpu,allowed_mask) \
((1 << cpu) & (allowed_mask))
-#if CONFIG_SMP
static unsigned long move(int curr_cpu, unsigned long allowed_mask, unsigned long now, int direction)
{
int search_idle = 1;
@@ -264,9 +261,9 @@
set_ioapic_affinity(irq, 1 << entry->cpu);
}
}
-#else /* !SMP */
+#else /* !CONFIG_IRQBALANCE */
static inline void balance_irq(int irq) { }
-#endif
+#endif /* CONFIG_IRQBALANCE */
/*
* support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to
next reply other threads:[~2002-08-05 23:50 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-05 23:51 Martin J. Bligh [this message]
2002-08-13 16:13 ` [PATCH] NUMA-Q disable irqbalance Martin J. Bligh
2002-08-13 16:41 ` Linus Torvalds
2002-08-13 16:57 ` Alan Cox
2002-08-13 17:24 ` Martin J. Bligh
2002-08-13 17:38 ` Alan Cox
2002-08-13 17:14 ` Martin J. Bligh
2002-08-13 17:24 ` Linus Torvalds
2002-08-13 18:02 ` Martin J. Bligh
2002-08-13 18:20 ` Linus Torvalds
2002-08-13 18:58 ` Martin J. Bligh
2002-08-13 19:22 ` Linus Torvalds
2002-08-13 20:04 ` Martin J. Bligh
2002-08-13 20:22 ` Linus Torvalds
2002-08-14 5:52 ` Martin J. Bligh
2002-08-14 10:10 ` Jos Hulzink
2002-08-14 11:12 ` David Lang
2002-08-13 20:22 ` Alan Cox
2002-08-13 20:35 ` Linus Torvalds
2002-08-13 20:34 ` Alan Cox
2002-08-13 20:42 ` Martin J. Bligh
2002-08-13 21:24 ` Linus Torvalds
2002-08-13 22:29 ` Andrew Theurer
2002-08-13 23:30 ` Andrea Arcangeli
2002-08-14 21:16 ` James Cleverdon
2002-08-23 2:31 ` [PATCH] 2.5.31 Summit NUMA patch with dynamic IRQ balancing James Cleverdon
2002-08-20 0:49 ` [PATCH] NUMA-Q disable irqbalance Dave Hansen
2002-08-13 22:08 ` Rik van Riel
2002-08-13 22:14 ` Rik van Riel
2002-08-14 14:49 ` Linus Torvalds
2002-08-14 15:19 ` Rik van Riel
2002-08-24 12:19 ` Zwane Mwaikambo
2002-08-27 1:23 ` James Cleverdon
2002-08-27 7:46 ` Zwane Mwaikambo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=349030000.1028591494@flay \
--to=martin.bligh@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox