[PATCH v2 0/4] Add support for Grinn GenioSBC-510/700 boards

[PATCH v2 0/4] Add support for Grinn GenioSBC-510/700 boards

[Mateusz Koza]

This patch series adds support for Grinn GenioSBC-510 and GenioSBC-700
boards based on MediaTek MT8370 and MT8390 SoCs, respectively. It
includes device tree files for both boards, updates to the device tree
bindings, and necessary modifications to the Makefile.

As far as I know, <angelogioacchino.delregno@collabora.com> has access
to the schematics for these boards, as we've shared them under NDA with
Collabora.

Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
---
v2: Fixed the subject prefixes,
	Fixed alignment in dts files,
	Added missing SPDX-License-Identifier,
	Fixed the ordering in dt-bindings,
	Dropped redundant info from commit messages,
	Run checkpatch.pl on the patchset and fixed the issues,
	as suggested by Krzysztof Kozlowski <krzk@kernel.org>.

---
Bartosz Bilas (1):
  arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn
    GenioSBC-510

Mateusz Koza (3):
  arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
  dt-bindings: arm: mediatek: Add grinn,genio-700-sbc
  dt-bindings: arm: mediatek: Add grinn,genio-510-sbc

 .../devicetree/bindings/arm/mediatek.yaml     |   2 +
 arch/arm64/boot/dts/mediatek/Makefile         |   2 +
 .../mediatek/mt8370-grinn-genio-510-sbc.dts   |  19 +
 .../mediatek/mt8390-grinn-genio-700-sbc.dts   |  19 +
 .../dts/mediatek/mt8390-grinn-genio-sbc.dtsi  | 674 ++++++++++++++++++
 .../dts/mediatek/mt8390-grinn-genio-som.dtsi  | 209 ++++++
 6 files changed, 925 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi

-- 
2.43.0

[PATCH v2 1/4] arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700

[Mateusz Koza]

Add support for Grinn GenioSBC-700. The Grinn GenioSBC-700 is a
single-board computer based on the MediaTek Genio 700 SoC. Its device
tree is split into separate SoM (.dtsi) and SBC (.dtsi) files, which are
combined in the SoC-specific .dts file.

More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-700
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc

Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
---
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 .../mediatek/mt8390-grinn-genio-700-sbc.dts   |  19 +
 .../dts/mediatek/mt8390-grinn-genio-sbc.dtsi  | 674 ++++++++++++++++++
 .../dts/mediatek/mt8390-grinn-genio-som.dtsi  | 209 ++++++
 4 files changed, 903 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 1dcea8b9aed9..7383d75d8041 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk-hdmi.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-grinn-genio-700-sbc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
new file mode 100644
index 000000000000..a37507a5a5d0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Mateusz Koza <mateusz.koza@grinn-global.com>
+ */
+/dts-v1/;
+
+#include "mt8188.dtsi"
+#include "mt8390-grinn-genio-som.dtsi"
+#include "mt8390-grinn-genio-sbc.dtsi"
+
+/ {
+	model = "Grinn GenioSBC-700";
+	compatible = "grinn,genio-700-sbc", "mediatek,mt8390", "mediatek,mt8188";
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 1 0x00000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
new file mode 100644
index 000000000000..b5267888f8b8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Mateusz Koza <mateusz.koza@grinn-global.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chassis-type = "embedded";
+	aliases {
+		ethernet0 = &eth;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		apu_mem: memory@55000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x55000000 0 0x1400000>; /* 20 MB */
+		};
+
+		vpu_mem: memory@57000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x57000000 0 0x1400000>; /* 20 MB */
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xf00000>;
+			no-map;
+		};
+
+		afe_dma_mem: memory@60f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60f00000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_dma_mem: memory@61000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x61000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&hdmi_ddc>;
+		hdmi-pwr-supply = <&hdmi_phy>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	reg_sbc_vsys: regulator-vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_fixed_5v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_sbc_vsys>;
+	};
+
+	reg_fixed_4v2: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_4v2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_sbc_vsys>;
+	};
+
+	reg_fixed_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_sbc_vsys>;
+	};
+};
+
+&pio {
+	gpio-line-names =
+	/*  0 -  4   */ "RPI_GPIO0", "RPI_GPIO1", "", "", "RPI_GPIO4",
+	/*  5 -  9   */ "", "RPI_GPIO6", "", "", "RPI_GPIO9",
+	/* 10 - 14   */ "RPI_GPIO10", "RPI_GPIO11", "", "", "",
+	/* 15 - 19   */ "", "", "", "", "",
+	/* 20 - 24   */ "", "RPI_GPIO21", "", "RPI_GPIO23", "",
+	/* 25 - 29   */ "", "", "", "", "",
+	/* 30 - 34   */ "RPI_GPIO30", "", "", "", "",
+	/* 35 - 39   */ "RPI_GPIO35", "RPI_GPIO36", "", "", "",
+	/* 40 - 44   */ "", "", "", "", "",
+	/* 45 - 49   */ "", "", "", "", "",
+	/* 50 - 54   */ "", "", "", "", "",
+	/* 55 - 59   */ "RPI_GPIO55", "RPI_GPIO56", "", "", "RPI_GPIO59",
+	/* 60 - 64   */ "RPI_GPIO60", "", "", "", "",
+	/* 65 - 69   */ "", "", "", "", "RPI_GPIO69",
+	/* 70 - 74   */ "", "", "RPI_GPIO72", "RPI_GPIO73", "RPI_GPIO74",
+	/* 75 - 79   */ "", "", "", "", "RPI_GPIO79",
+	/* 80 - 84   */ "RPI_GPIO80", "RPI_GPIO81", "RPI_GPIO82", "", "",
+	/* 85 - 89   */ "", "", "", "", "",
+	/* 90 - 94   */ "", "", "", "", "",
+	/* 95 - 99   */ "", "", "", "", "",
+	/*100 - 104  */ "", "", "", "", "",
+	/*105 - 109  */ "", "", "", "", "",
+	/*110 - 114  */ "", "", "", "", "",
+	/*115 - 119  */ "", "", "", "", "",
+	/*120 - 124  */ "", "RPI_GPIO121", "RPI_GPIO122", "RPI_GPIO123", "RPI_GPIO124";
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
+				 <PINMUX_GPIO55__FUNC_B1_SCL0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>,
+				 <PINMUX_GPIO59__FUNC_B1_SCL2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins {
+			pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>,
+				 <PINMUX_GPIO61__FUNC_B1_SCL3>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c5_pins: i2c5-pins {
+		pins {
+			pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>,
+				 <PINMUX_GPIO65__FUNC_B1_SCL5>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>,
+				 <PINMUX_GPIO67__FUNC_B1_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
+				 <PINMUX_GPIO32__FUNC_I1_URXD0>;
+			bias-pull-up;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO86__FUNC_O_UTXD1>,
+				 <PINMUX_GPIO87__FUNC_I1_URXD1>;
+			bias-pull-up;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <PINMUX_GPIO35__FUNC_O_UTXD2>,
+				 <PINMUX_GPIO36__FUNC_I1_URXD2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie_pins_default: pcie-default {
+		mux {
+			pinmux = <PINMUX_GPIO47__FUNC_I1_WAKEN>,
+				 <PINMUX_GPIO48__FUNC_O_PERSTN>,
+				 <PINMUX_GPIO49__FUNC_B1_CLKREQN>;
+			bias-pull-up;
+		};
+	};
+
+	eth_default_pins: eth-default-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B0_GBE_TXC>,
+				 <PINMUX_GPIO140__FUNC_I0_GBE_RXC>,
+				 <PINMUX_GPIO141__FUNC_I0_GBE_RXDV>,
+				 <PINMUX_GPIO142__FUNC_O_GBE_TXEN>;
+			drive-strength = <8>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_O_GBE_MDC>,
+				 <PINMUX_GPIO144__FUNC_B1_GBE_MDIO>;
+			drive-strength = <8>;
+			input-enable;
+		};
+
+		pins-power {
+			pinmux = <PINMUX_GPIO145__FUNC_B_GPIO145>,
+				 <PINMUX_GPIO146__FUNC_B_GPIO146>;
+			output-high;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_I0_GBE_RXD3>,
+				 <PINMUX_GPIO136__FUNC_I0_GBE_RXD2>,
+				 <PINMUX_GPIO137__FUNC_I0_GBE_RXD1>,
+				 <PINMUX_GPIO138__FUNC_I0_GBE_RXD0>;
+			drive-strength = <8>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_O_GBE_TXD3>,
+				 <PINMUX_GPIO132__FUNC_O_GBE_TXD2>,
+				 <PINMUX_GPIO133__FUNC_O_GBE_TXD1>,
+				 <PINMUX_GPIO134__FUNC_O_GBE_TXD0>;
+			drive-strength = <8>;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-cc {
+			pinmux = <PINMUX_GPIO139__FUNC_B_GPIO139>,
+				 <PINMUX_GPIO140__FUNC_B_GPIO140>,
+				 <PINMUX_GPIO141__FUNC_B_GPIO141>,
+				 <PINMUX_GPIO142__FUNC_B_GPIO142>;
+		};
+
+		pins-mdio {
+			pinmux = <PINMUX_GPIO143__FUNC_B_GPIO143>,
+				 <PINMUX_GPIO144__FUNC_B_GPIO144>;
+			input-disable;
+			bias-disable;
+		};
+
+		pins-rxd {
+			pinmux = <PINMUX_GPIO135__FUNC_B_GPIO135>,
+				 <PINMUX_GPIO136__FUNC_B_GPIO136>,
+				 <PINMUX_GPIO137__FUNC_B_GPIO137>,
+				 <PINMUX_GPIO138__FUNC_B_GPIO138>;
+		};
+
+		pins-txd {
+			pinmux = <PINMUX_GPIO131__FUNC_B_GPIO131>,
+				 <PINMUX_GPIO132__FUNC_B_GPIO132>,
+				 <PINMUX_GPIO133__FUNC_B_GPIO133>,
+				 <PINMUX_GPIO134__FUNC_B_GPIO134>;
+		};
+	};
+
+	spi2_pins: spi2-pins {
+		pins-spi {
+			pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
+				<PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
+				<PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
+				<PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
+			bias-disable;
+		};
+	};
+
+	hdmi_vreg_pins: hdmi-vreg-pins {
+		pins-pwr {
+			pinmux = <PINMUX_GPIO50__FUNC_O_HDMITX20_PWR5V>;
+			bias-disable;
+		};
+	};
+
+	hdmi_pins: hdmi-pins {
+		pins-hotplug {
+			pinmux = <PINMUX_GPIO51__FUNC_I0_HDMITX20_HTPLG>;
+			bias-pull-down;
+		};
+
+		pins-cec {
+			pinmux = <PINMUX_GPIO52__FUNC_B1_HDMITX20_CEC>;
+			bias-disable;
+		};
+
+		pins-ddc {
+			pinmux = <PINMUX_GPIO53__FUNC_B1_HDMITX20_SCL>,
+				 <PINMUX_GPIO54__FUNC_B1_HDMITX20_SDA>;
+			drive-strength = <10>;
+		};
+	};
+
+	audio_default_pins: audio-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO121__FUNC_B0_PCM_CLK>,
+				 <PINMUX_GPIO122__FUNC_B0_PCM_SYNC>,
+				 <PINMUX_GPIO123__FUNC_O_PCM_DO>,
+				 <PINMUX_GPIO124__FUNC_I0_PCM_DI>;
+		};
+	};
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethernet_phy0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 11000 200000>;
+	mediatek,tx-delay-ps = <2030>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	mediatek,mac-wol;
+	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eth_mdio {
+	ethernet_phy0: ethernet-phy@3 {
+		reg = <3>;
+		compatible = "ethernet-phy-ieee802.3-c22";
+		eee-broken-1000t;
+		interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins_default>;
+	status = "okay";
+};
+
+&pciephy {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dpi1_in>;
+			};
+		};
+	};
+};
+
+&dpi1 {
+	status = "okay";
+};
+
+&dpi1_in {
+	remote-endpoint = <&merge5_out>;
+};
+
+&dpi1_out {
+	remote-endpoint = <&hdmi0_in>;
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	remote-endpoint = <&dpi1_out>;
+};
+
+&hdmi0_out {
+	remote-endpoint = <&hdmi_connector_in>;
+};
+
+&hdmi_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_vreg_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8027";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&reg_fixed_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8025";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&reg_fixed_3v3>;
+	};
+};
+
+&xhci2 {
+	status = "okay";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "microchip,usb2513bi";
+		reg = <1>;
+		vdd-supply = <&reg_fixed_3v3>;
+	};
+};
+
+&ssusb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+};
+
+&ssusb1 {
+	status = "okay";
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	maximum-speed = "super-speed";
+};
+
+&ssusb2 {
+	status = "okay";
+	dr_mode = "host";
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	maximum-speed = "high-speed";
+};
+
+&scp_c0 {
+	firmware-name = "mediatek/mt8188/scp.img";
+	memory-region = <&scp_mem>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&mt6359_vproc2_buck_reg>;
+	status = "okay";
+};
+
+&adsp {
+	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+	status = "okay";
+};
+
+&afe {
+	memory-region = <&afe_dma_mem>;
+	status = "okay";
+};
+
+&sound {
+	compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb";
+	model = "mt8390-evk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_default_pins>;
+	audio-routing =
+		"Headphone", "Headphone L",
+		"Headphone", "Headphone R",
+		"AP DMIC", "AUDGLB",
+		"AP DMIC", "MIC_BIAS_0",
+		"AP DMIC", "MIC_BIAS_2",
+		"DMIC_INPUT", "AP DMIC";
+
+	mediatek,adsp = <&adsp>;
+	status = "okay";
+
+	dai-link-0 {
+		link-name = "ETDM3_OUT_BE";
+
+		codec {
+			sound-dai = <&hdmi 0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi
new file mode 100644
index 000000000000..d88481beff9d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Mateusz Koza <mateusz.koza@grinn-global.com>
+ */
+
+#include "mt6359.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c1 = &i2c1;
+		mmc0 = &mmc0;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&mfg0 {
+	domain-supply = <&mt6359_vproc2_buck_reg>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x1481b>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcn18_ldo_reg {
+	regulator-name = "vcn18_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcn33_2_bt_ldo_reg {
+	regulator-name = "vcn33_2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-name = "dvdd_proc_l";
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-name = "dvdd_core";
+	regulator-always-on;
+};
+
+&mt6359_vpa_buck_reg {
+	regulator-name = "vpa_pmu";
+	regulator-max-microvolt = <3100000>;
+};
+
+&mt6359_vproc2_buck_reg {
+	/* The name "vgpu" is required by mtk-regulator-coupler */
+	regulator-name = "vgpu";
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-name = "dvdd_adsp";
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-name = "va12_abb2_pmu";
+	regulator-always-on;
+};
+
+&mt6359_vsim1_ldo_reg {
+	regulator-name = "vsim1_pmu";
+	regulator-enable-ramp-delay = <480>;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	/* The name "vsram_gpu" is required by mtk-regulator-coupler */
+	regulator-name = "vsram_gpu";
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6359_vproc2_buck_reg>;
+	regulator-coupled-max-spread = <6250>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-name = "vufs18_pmu";
+	regulator-always-on;
+};
+
+&pio {
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>,
+				 <PINMUX_GPIO57__FUNC_B1_SCL1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
+				 <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
+				 <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
+				 <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
+				 <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
+				 <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
+				 <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
+				 <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
+				 <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+};
+
+&pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+};
-- 
2.43.0

[PATCH v2 2/4] dt-bindings: arm: mediatek: Add grinn,genio-700-sbc

[Mateusz Koza]

Add device tree bindings support for the Grinn GenioSBC-700, a
single-board computer based on the MediaTek Genio 700 SoC.

More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-700
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc

Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index a7e0a72f6e4c..122af0bad141 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -430,6 +430,7 @@ properties:
           - const: mediatek,mt8188
       - items:
           - enum:
+              - grinn,genio-700-sbc
               - mediatek,mt8390-evk
           - const: mediatek,mt8390
           - const: mediatek,mt8188
-- 
2.43.0

[PATCH v2 3/4] arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510

[Mateusz Koza]

From: Bartosz Bilas <b.bilas@grinn-global.com>

Add support for Grinn GenioSBC-510. Based on the commit introducing
support for the Grinn GenioSBC-700, this change adds support for the
Grinn GenioSBC-510, a single-board computer based on the MediaTek Genio
510 SoC.

More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-510
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
---
 arch/arm64/boot/dts/mediatek/Makefile         |  1 +
 .../mediatek/mt8370-grinn-genio-510-sbc.dts   | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 7383d75d8041..729d786b1236 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk-eth.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk-hdmi.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-grinn-genio-510-sbc.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-grinn-genio-700-sbc.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts
new file mode 100644
index 000000000000..117ea694cda3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2025 Grinn sp. z o.o.
+ * Author: Bartosz Bilas <bartosz.bilas@grinn-global.com>
+ */
+/dts-v1/;
+
+#include "mt8370.dtsi"
+#include "mt8390-grinn-genio-som.dtsi"
+#include "mt8390-grinn-genio-sbc.dtsi"
+
+/ {
+	model = "Grinn GenioSBC-510";
+	compatible = "grinn,genio-510-sbc", "mediatek,mt8370", "mediatek,mt8188";
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 1 0x00000000>;
+	};
+};
-- 
2.43.0

[PATCH v2 4/4] dt-bindings: arm: mediatek: Add grinn,genio-510-sbc

[Mateusz Koza]

Add device tree bindings support for the Grinn GenioSBC-510, a
single-board computer based on the MediaTek Genio 510 SoC.

More details about the hardware:
- https://grinn-global.com/products/grinn-geniosom-510
- https://grinn-global.com/products/grinn-genioboard-edge-ai-sbc

Signed-off-by: Mateusz Koza <mateusz.koza@grinn-global.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 122af0bad141..468672b0296a 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -425,6 +425,7 @@ properties:
           - const: mediatek,mt8365
       - items:
           - enum:
+              - grinn,genio-510-sbc
               - mediatek,mt8370-evk
           - const: mediatek,mt8370
           - const: mediatek,mt8188
-- 
2.43.0

Re: [PATCH v2 1/4] arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700

[Andrew Lunn]

> +&eth {
> +	phy-mode = "rgmii-rxid";

Does the PCB have an extra long TX clock line?

https://elixir.bootlin.com/linux/v6.15/source/Documentation/devicetree/bindings/net/ethernet-controller.yaml#L287

> +	phy-handle = <&ethernet_phy0>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 11000 200000>;
> +	mediatek,tx-delay-ps = <2030>;

Please try setting this to 30, and use 'rgmii-id'

	Andrew

Re: [PATCH v2 2/4] dt-bindings: arm: mediatek: Add grinn,genio-700-sbc

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 54 bytes --]



Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 4/4] dt-bindings: arm: mediatek: Add grinn,genio-510-sbc

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 54 bytes --]



Acked-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]