From: Stephan Mueller <smueller@chronox.de>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>,
sandy harris <sandyinchina@gmail.com>,
linux-kernel@vger.kernel.org, linux-crypto@vger.kernel.org
Subject: Re: [PATCH] CPU Jitter RNG: inclusion into kernel crypto API and /dev/random
Date: Sun, 03 Nov 2013 08:20:34 +0100 [thread overview]
Message-ID: <3537770.iLHXPOXMiU@tauon> (raw)
In-Reply-To: <20131102110112.GA16231@amd.pavel.ucw.cz>
Am Samstag, 2. November 2013, 12:01:13 schrieb Pavel Machek:
Hi Pavel,
>Hi!
>
>> >sense of where the unpredictability might be coming from, and
>> >whether
>> >the unpredictability is coming from something which is fundamentally
>> >arising from something which is chaotic or quantum effect, or just
>> >because we don't have a good way of modelling the behavior of the
>> >L1/L2 cache (for example) and that is spoofing your entropy
>> >estimator.
>>
>> Please note: if the jitter really comes from the oscillator effect of
>> the RAM clock vs. the CPU clock (which I suspect), we will not be
>> able
>> to alter the jitter software wise.
>
>Well... if it is really oscillator effect, there should be _no_
>entropy when running with L1/L2 enabled (because DRAM will not be
>accessed at all at that case).
That is a good one!
Another friend of mine mentioned that he assumes the rise and fall times
of transistors varies very slightly and could be the main reason for the
jitter. I do not think that this is really the case, because our gates
that form the CPU instructions comprise of many transistors. The
combined raise/fall jitter should cancel each other out.
That said, the full root cause is is not really known at this time
considering that major chip vendors have no real clue either.
>
>There should be way to extract entropy more directly from various
>oscillator effects, no?
I am working a different way of measuring such oscillator effects by
using the high-resolution timer of the CPU and measure it with a
Jiffies-based snapshotting window. So, here I would combine two timers
that are differently generated. If their frequencies would be relative
prime to each other, we would measure a direct oscillator effect.
This already was tried in the cryptlib RNG, but I try a slightly
different approach.
Yet, nothing is complete at this point.
>
>For DRAM, just perform timing, have entropy. Plus we could for example
>measure PIT vs. other timer sources... (but I suspect that on PCs we
>already have enough entropy...)
I suspect so too, but my measurements as of now are not conclusive.
>
Pavel
Ciao
Stephan
next prev parent reply other threads:[~2013-11-03 7:20 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-11 18:38 [PATCH] CPU Jitter RNG: inclusion into kernel crypto API and /dev/random Stephan Mueller
2013-10-12 1:45 ` Sandy Harris
2013-10-12 3:28 ` Theodore Ts'o
2013-10-12 19:04 ` Stephan Mueller
2013-10-12 20:12 ` Stephan Mueller
[not found] ` <CACXcFm=_jmeKe2YYbHDi-jTGX-23hDsDeu_weWQkr2F_FpE_6g@mail.gmail.com>
2013-10-14 13:38 ` Fwd: " Sandy Harris
2013-10-14 14:12 ` Stephan Mueller
2013-10-14 14:26 ` Stephan Mueller
2013-10-14 14:14 ` Sandy Harris
2013-10-14 14:40 ` Stephan Mueller
2013-10-14 15:18 ` Sandy Harris
2013-10-14 15:26 ` Stephan Mueller
2013-10-14 15:46 ` Sandy Harris
2013-10-14 21:33 ` Sandy Harris
2013-10-15 6:23 ` Stephan Mueller
2013-10-28 15:40 ` Stephan Mueller
2013-10-28 16:06 ` Henrique de Moraes Holschuh
2013-10-28 16:15 ` Stephan Mueller
2013-10-28 21:45 ` Theodore Ts'o
2013-10-29 8:42 ` Stephan Mueller
2013-10-29 13:24 ` Theodore Ts'o
2013-10-29 14:00 ` Stephan Mueller
2013-10-29 22:25 ` Stephan Mueller
2013-11-02 11:01 ` Pavel Machek
2013-11-02 11:12 ` Pavel Machek
2013-11-03 7:20 ` Stephan Mueller [this message]
2013-11-03 12:41 ` Theodore Ts'o
2013-11-05 12:20 ` Stephan Mueller
2013-11-06 11:49 ` Stephan Mueller
2013-11-06 12:43 ` Theodore Ts'o
2013-11-06 12:51 ` Stephan Mueller
2013-11-06 13:04 ` Theodore Ts'o
2013-11-06 13:24 ` Pavel Machek
2013-11-07 0:36 ` Nicholas Mc Guire
2013-11-07 5:21 ` Stephan Mueller
2013-11-09 22:04 ` Clemens Ladisch
2013-11-10 1:10 ` Stephan Mueller
2013-11-10 16:31 ` Clemens Ladisch
2013-11-10 17:21 ` Stephan Mueller
2013-11-10 20:28 ` Clemens Ladisch
2013-11-13 3:12 ` Stephan Mueller
2013-11-13 11:51 ` Clemens Ladisch
2013-11-13 15:15 ` Stephan Mueller
2013-11-13 17:14 ` Pavel Machek
2013-11-14 10:51 ` Clemens Ladisch
2013-11-14 18:01 ` Stephan Mueller
2013-11-14 18:30 ` Clemens Ladisch
2013-11-14 18:34 ` Stephan Mueller
2013-11-11 2:58 ` H. Peter Anvin
2013-11-07 1:03 ` Nicholas Mc Guire
2013-11-07 5:26 ` Stephan Mueller
2013-11-09 22:04 ` Clemens Ladisch
2013-11-10 1:16 ` Stephan Mueller
2013-11-03 23:32 ` Pavel Machek
2013-11-05 12:25 ` Stephan Mueller
2013-11-05 13:45 ` Stephan Mueller
2013-11-06 11:42 ` Stephan Mueller
2013-11-06 13:26 ` Pavel Machek
2013-11-07 3:12 ` Stephan Mueller
2013-11-13 3:37 ` [PATCH] CPU Jitter RNG: Executing time variation tests on bare metal Stephan Mueller
2013-10-30 12:59 ` [PATCH] CPU Jitter RNG: inclusion into kernel crypto API and /dev/random Sandy Harris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3537770.iLHXPOXMiU@tauon \
--to=smueller@chronox.de \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=sandyinchina@gmail.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox