Re: [PATCH 3/7] microblaze: move "... is ready" message to arch/microblaze/Makefile

[Michal Simek <monstr@monstr.eu>]

[-- Attachment #1.1: Type: text/plain, Size: 2541 bytes --]

On 03. 12. 18 8:50, Masahiro Yamada wrote:
> To prepare for more fixes, move this to arch/microblaze/Makefile.
> Otherwise, the same "... is ready" would be printed multiple times.
> 
> (Another solution would be, to remove these messages entirely unless
> people persist with them.)
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> ---
> 
>  arch/microblaze/Makefile      | 2 ++
>  arch/microblaze/boot/Makefile | 4 ----
>  2 files changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
> index 97e1384..cfd7bfca 100644
> --- a/arch/microblaze/Makefile
> +++ b/arch/microblaze/Makefile
> @@ -81,9 +81,11 @@ archclean:
>  
>  linux.bin linux.bin.gz linux.bin.ub: vmlinux
>  	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
> +	@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
>  
>  simpleImage.%: vmlinux
>  	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
> +	@echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
>  
>  define archhelp
>    echo '* linux.bin    - Create raw binary'
> diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
> index e8684a2..c2579a7 100644
> --- a/arch/microblaze/boot/Makefile
> +++ b/arch/microblaze/boot/Makefile
> @@ -9,15 +9,12 @@ OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary
>  
>  $(obj)/linux.bin: vmlinux FORCE
>  	$(call if_changed,objcopy)
> -	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
>  
>  $(obj)/linux.bin.ub: $(obj)/linux.bin FORCE
>  	$(call if_changed,uimage)
> -	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
>  
>  $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
>  	$(call if_changed,gzip)
> -	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
>  
>  quiet_cmd_cp = CP      $< $@$2
>  	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
> @@ -35,6 +32,5 @@ $(obj)/simpleImage.%: vmlinux FORCE
>  	$(call if_changed,objcopy)
>  	$(call if_changed,uimage)
>  	$(call if_changed,strip,.strip)
> -	@echo 'Kernel: $(UIMAGE_OUT) is ready' ' (#'`cat .version`')'
>  
>  clean-files += simpleImage.*
> 

TBH I can't see this problematic but if this is aligned with others I
have no problem with it.

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]