From: Eric Auger <eauger@redhat.com>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Dominik Brodowski <linux@dominikbrodowski.net>,
LKML <linux-kernel@vger.kernel.org>,
Myron Stowe <myron.stowe@redhat.com>
Subject: Re: [PATCH 13/23] PCI: Add pbus_mem_size_optional() to handle optional sizes
Date: Wed, 8 Jul 2026 10:08:58 +0200 [thread overview]
Message-ID: <362cc52c-e489-4f5f-a21e-bc735c970912@redhat.com> (raw)
In-Reply-To: <fbdc88d3-b6b4-8098-58c5-1fdb2f7b19d6@linux.intel.com>
Hi Ilpo
On 7/7/26 6:12 PM, Ilpo Järvinen wrote:
> On Tue, 7 Jul 2026, Eric Auger wrote:
>
>> Hi Ilpo,
>>
>> On 12/19/25 6:40 PM, Ilpo Järvinen wrote:
>>> The resource loop in pbus_size_mem() handles optional resources that
>>> are either fully optional (SRIOV and disabled Expansion ROMs) or bridge
>>> windows that may be optional only for a part. The logic is little
>>> inconsistent when it comes to a bridge window that has only optional
>>> children resources as it would be more natural to treat it similar to
>>> any fully optional resource. As resource size should be zero in that
>>> case, it shouldn't cause any bugs but it still seems useful to address
>>> the inconsistency.
>>>
>>> Place the optional size related code of pbus_size_mem() into
>>> pbus_mem_size_optional() and add check into pci_resource_is_optional()
>>> for entirely optional bridge windows. Reorder the logic inside
>>> pbus_mem_size_optional() such that fully optional resources are handled
>>> the same irrespective to whether the resource is a bridge window or
>>> not.
>>
>> This patch seems to introduce a regression when trying to hotplug a
>> virtio-net-pci device behind a XIO3130 downstream port in the following
>> hierarchy.
>>
>> this happens with a v7.2-rc2 guest kernel, on an arm64 guest with qemu vmm.
>>
>>
>>
>> 00:01.0 Host bridge: Red Hat, Inc. QEMU PCIe Expander bridge
>> Subsystem: Red Hat, Inc. Device 1100
>>
>> |_ 0a:00.0 PCI bridge: Red Hat, Inc. QEMU PCIe Root port
>> Subsystem: Red Hat, Inc. Device 0000
>> Kernel driver in use: pcieport
>>
>> |_ 0b:00.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch
>>
>> (Upstream) (rev 02)
>> Kernel driver in use: pcieport
>>
>> |_ 0c:02.0 PCI bridge: Texas Instruments XIO3130 PCI Express
>> Switch (Downstream) (rev 01)
>> Kernel driver in use: pcieport
>
> Hi Eric,
>
> Thanks for the report.
>
> I cannot get much done with the log snippets. The first line with
> difference is a symptom of something that originates from outside of the
> snippet.
>
> Could you please take a log with dyndbg="file drivers/pci/*.c +p" on the
> kernel command line and also include a /proc/iomem dump. Like
> you did now, preferrably take those from both working and failing case so
> I can easily diff them.
I just sent you some guest console logs in pass/fail + /proc/iomem as
attachements in separate email. Please let me know if you need some
additional info. Important note: my guest has 64kB page size.
Thanks
Eric
>
> --
> i.
>
>
>> This produces the following trace
>>
>>
>> [ 28.557947] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Card present
>> [ 28.557949] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Link Up
>> [ 29.605376] pci 0000:0d:00.0: [1af4:1041] type 00 class 0x020000 PCIe
>> Endpoint
>> [ 29.605724] pci 0000:0d:00.0: BAR 1 [mem 0x00000000-0x00000fff]
>> [ 29.605765] pci 0000:0d:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit
>> pref]
>> [ 29.605816] pci 0000:0d:00.0: enabling Extended Tags
>> [ 29.606994] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref] to [bus 0d] add_size 100000 add_align 100000
>> [ 29.606998] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000] to [bus 0d] add_size 100000 add_align 100000
>> [ 29.607003] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00200000]: can't assign; no space
>> [ 29.607005] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00200000]: failed to assign
>> [ 29.607007] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000
>> 64bit pref]: can't assign; no space
>> [ 29.607008] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000
>> 64bit pref]: failed to assign
>> [ 29.607010] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 29.607012] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 29.607014] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000]: can't assign; no space
>> [ 29.607016] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000]: failed to assign
>> [ 29.607018] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref]: can't assign; no space
>> [ 29.607019] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref]: failed to assign
>> [ 29.607021] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 29.607022] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 29.607025] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> can't assign; no space
>> [ 29.607026] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> failed to assign
>> [ 29.607027] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't
>> assign; no space
>> [ 29.607028] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to
>> assign
>> [ 29.607029] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> can't assign; no space
>> [ 29.607030] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> failed to assign
>> [ 29.607031] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't
>> assign; no space
>> [ 29.607032] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to
>> assign
>> [ 29.607033] pcieport 0000:0c:02.0: PCI bridge to [bus 0d]
>> [ 29.611260] PCI: No. 2 try to assign unassigned res
>> [ 29.611269] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref] to [bus 0d] add_size 100000 add_align 100000
>> [ 29.611272] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000] to [bus 0d] add_size 100000 add_align 100000
>> [ 29.611276] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00200000]: can't assign; no space
>> [ 29.611277] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00200000]: failed to assign
>> [ 29.611278] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000
>> 64bit pref]: can't assign; no space
>> [ 29.611279] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000
>> 64bit pref]: failed to assign
>> [ 29.611280] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 29.611280] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 29.611281] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000]: can't assign; no space
>> [ 29.611282] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000]: failed to assign
>> [ 29.611283] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref]: can't assign; no space
>> [ 29.611283] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref]: failed to assign
>> [ 29.611284] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 29.611284] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 29.611286] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> can't assign; no space
>> [ 29.611286] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> failed to assign
>> [ 29.611287] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't
>> assign; no space
>> [ 29.611288] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to
>> assign
>> [ 29.611288] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> can't assign; no space
>> [ 29.611289] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]:
>> failed to assign
>> [ 29.611289] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't
>> assign; no space
>> [ 29.611290] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to
>> assign
>> [ 29.611291] pcieport 0000:0c:02.0: PCI bridge to [bus 0d]
>> [ 29.616141] ACPI: \_SB_.L0A2: Enabled at IRQ 37
>> [ 29.616378] virtio-pci 0000:0d:00.0: virtio_pci: leaving for legacy
>> driver
>>
>> Previous to this commit hotplug was successful:
>>
>> vm-rhel10 login: [ 38.385692] pcieport 0000:0c:02.0: pciehp:
>> Slot(0-1): Button press: will power on in 5 sec
>> [ 38.385798] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Card present
>> [ 38.385799] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Link Up
>> [ 39.553709] pci 0000:0d:00.0: [1af4:1041] type 00 class 0x020000 PCIe
>> Endpoint
>> [ 39.554018] pci 0000:0d:00.0: BAR 1 [mem 0x00000000-0x00000fff]
>> [ 39.554042] pci 0000:0d:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit
>> pref]
>> [ 39.554099] pci 0000:0d:00.0: enabling Extended Tags
>> [ 39.555202] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000
>> 64bit pref] to [bus 0d] add_size 100000 add_align 100000
>> [ 39.555206] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00100000] to [bus 0d] add_size 100000 add_align 100000
>> [ 39.555212] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00200000]: can't assign; no space
>> [ 39.555213] pcieport 0000:0c:02.0: bridge window [mem size
>> 0x00200000]: failed to assign
>> [ 39.555215] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000
>> 64bit pref]: can't assign; no space
>> [ 39.555216] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000
>> 64bit pref]: failed to assign
>> [ 39.555218] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 39.555219] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 39.555222] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10a00000-0x10afffff]: assigned
>> [ 39.555224] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10b00000-0x10bfffff 64bit pref]: assigned
>> [ 39.555225] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 39.555227] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 39.555228] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10a00000-0x10afffff]: failed to expand by 0x100000
>> [ 39.555230] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10a00000-0x10afffff]: failed to add optional 100000
>> [ 39.555232] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10b00000-0x10bfffff 64bit pref]: failed to expand by 0x100000
>> [ 39.555234] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10b00000-0x10bfffff 64bit pref]: failed to add optional 100000
>> [ 39.555236] pci 0000:0d:00.0: BAR 4 [mem 0x10b00000-0x10b03fff 64bit
>> pref]: assigned
>> [ 39.555290] pci 0000:0d:00.0: BAR 1 [mem 0x10a00000-0x10a00fff]: assigned
>> [ 39.555305] pcieport 0000:0c:02.0: PCI bridge to [bus 0d]
>> [ 39.556804] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10a00000-0x10afffff]
>> [ 39.557730] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10b00000-0x10bfffff 64bit pref]
>> [ 39.559629] PCI: No. 2 try to assign unassigned res
>> [ 39.559636] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 39.559638] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 39.559640] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> can't assign; no space
>> [ 39.559642] pcieport 0000:0c:02.0: bridge window [io size 0x1000]:
>> failed to assign
>> [ 39.559644] pcieport 0000:0c:02.0: PCI bridge to [bus 0d]
>> [ 39.561078] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10a00000-0x10afffff]
>> [ 39.562011] pcieport 0000:0c:02.0: bridge window [mem
>> 0x10b00000-0x10bfffff 64bit pref]
>> [ 39.564500] ACPI: \_SB_.L0A2: Enabled at IRQ 37
>> [ 39.564541] virtio-pci 0000:0d:00.0: enabling device (0000 -> 0002)
>> [ 39.572231] virtio_net virtio2 enp13s0: renamed from eth0
>>
>> Any clue?
>>
>> Thank you in advance
>>
>> Eric
>>
>>
>>
>>
>>
>>
>>
>>>
>>> Additional motivation for this are the upcoming changes that add
>>> complexity to the optional sizing logic due to Resizable BAR awareness.
>>> The extra logic would exceed any reasonable indentation level if the
>>> optional sizing code is kept within the loop body.
>>>
>>> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>>> ---
>>> drivers/pci/setup-bus.c | 77 +++++++++++++++++++++++++++++------------
>>> 1 file changed, 54 insertions(+), 23 deletions(-)
>>>
>>> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
>>> index 3d1d3cefcdba..3fcc7641c374 100644
>>> --- a/drivers/pci/setup-bus.c
>>> +++ b/drivers/pci/setup-bus.c
>>> @@ -125,15 +125,6 @@ static resource_size_t get_res_add_size(struct list_head *head,
>>> return dev_res ? dev_res->add_size : 0;
>>> }
>>>
>>> -static resource_size_t get_res_add_align(struct list_head *head,
>>> - struct resource *res)
>>> -{
>>> - struct pci_dev_resource *dev_res;
>>> -
>>> - dev_res = res_to_dev_res(head, res);
>>> - return dev_res ? dev_res->min_align : 0;
>>> -}
>>> -
>>> static void restore_dev_resource(struct pci_dev_resource *dev_res)
>>> {
>>> struct resource *res = dev_res->res;
>>> @@ -386,6 +377,8 @@ bool pci_resource_is_optional(const struct pci_dev *dev, int resno)
>>> return true;
>>> if (resno == PCI_ROM_RESOURCE && !(res->flags & IORESOURCE_ROM_ENABLE))
>>> return true;
>>> + if (pci_resource_is_bridge_win(resno) && !resource_size(res))
>>> + return true;
>>>
>>> return false;
>>> }
>>> @@ -1258,6 +1251,54 @@ static resource_size_t calculate_head_align(resource_size_t *aligns,
>>> return head_align;
>>> }
>>>
>>> +/*
>>> + * pbus_size_mem_optional - Account optional resources in bridge window
>>> + *
>>> + * Account an optional resource or the optional part of the resource in bridge
>>> + * window size.
>>> + *
>>> + * Return: %true if the resource is entirely optional.
>>> + */
>>> +static bool pbus_size_mem_optional(struct pci_dev *dev, int resno,
>>> + resource_size_t align,
>>> + struct list_head *realloc_head,
>>> + resource_size_t *add_align,
>>> + resource_size_t *children_add_size)
>>> +{
>>> + struct resource *res = pci_resource_n(dev, resno);
>>> + bool optional = pci_resource_is_optional(dev, resno);
>>> + resource_size_t r_size = resource_size(res);
>>> + struct pci_dev_resource *dev_res;
>>> +
>>> + if (!realloc_head)
>>> + return false;
>>> +
>>> + if (!optional) {
>>> + /*
>>> + * Only bridges have optional sizes in realloc_head at this
>>> + * point. As res_to_dev_res() walks the entire realloc_head
>>> + * list, skip calling it when known unnecessary.
>>> + */
>>> + if (!pci_resource_is_bridge_win(resno))
>>> + return false;
>>> +
>>> + dev_res = res_to_dev_res(realloc_head, res);
>>> + if (dev_res) {
>>> + *children_add_size += dev_res->add_size;
>>> + *add_align = max(*add_align, dev_res->min_align);
>>> + }
>>> +
>>> + return false;
>>> + }
>>> +
>>> + /* Put SRIOV requested res to the optional list */
>>> + add_to_list(realloc_head, dev, res, 0, align);
>>> + *children_add_size += r_size;
>>> + *add_align = max(align, *add_align);
>>> +
>>> + return true;
>>> +}
>>> +
>>> /**
>>> * pbus_size_mem() - Size the memory window of a given bus
>>> *
>>> @@ -1284,7 +1325,6 @@ static void pbus_size_mem(struct pci_bus *bus, struct resource *b_res,
>>> resource_size_t aligns[28] = {}; /* Alignments from 1MB to 128TB */
>>> int order, max_order;
>>> resource_size_t children_add_size = 0;
>>> - resource_size_t children_add_align = 0;
>>> resource_size_t add_align = 0;
>>>
>>> if (!b_res)
>>> @@ -1311,7 +1351,6 @@ static void pbus_size_mem(struct pci_bus *bus, struct resource *b_res,
>>> if (b_res != pbus_select_window(bus, r))
>>> continue;
>>>
>>> - r_size = resource_size(r);
>>> align = pci_resource_alignment(dev, r);
>>> /*
>>> * aligns[0] is for 1MB (since bridge memory
>>> @@ -1327,25 +1366,17 @@ static void pbus_size_mem(struct pci_bus *bus, struct resource *b_res,
>>> continue;
>>> }
>>>
>>> - /* Put SRIOV requested res to the optional list */
>>> - if (realloc_head && pci_resource_is_optional(dev, i)) {
>>> - add_align = max(align, add_align);
>>> - add_to_list(realloc_head, dev, r, 0, 0 /* Don't care */);
>>> - children_add_size += r_size;
>>> + if (pbus_size_mem_optional(dev, i, align,
>>> + realloc_head, &add_align,
>>> + &children_add_size))
>>> continue;
>>> - }
>>>
>>> + r_size = resource_size(r);
>>> size += max(r_size, align);
>>>
>>> aligns[order] += align;
>>> if (order > max_order)
>>> max_order = order;
>>> -
>>> - if (realloc_head) {
>>> - children_add_size += get_res_add_size(realloc_head, r);
>>> - children_add_align = get_res_add_align(realloc_head, r);
>>> - add_align = max(add_align, children_add_align);
>>> - }
>>> }
>>> }
>>>
>>
>>
>
next prev parent reply other threads:[~2026-07-08 8:09 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-19 17:40 [PATCH 00/23] PCI: Resource code fixes (supercedes earlier series) & cleanups Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 01/23] PCI: Fix bridge window alignment with optional resources Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 02/23] PCI: Rewrite bridge window head alignment function Ilpo Järvinen
2026-01-26 22:17 ` Bjorn Helgaas
2026-01-27 11:22 ` Ilpo Järvinen
2026-01-27 22:39 ` Bjorn Helgaas
2025-12-19 17:40 ` [PATCH 03/23] PCI: Stop over-estimating bridge window size Ilpo Järvinen
2026-03-05 15:13 ` Guenter Roeck
2026-03-05 16:28 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 04/23] resource: Increase MAX_IORES_LEVEL to 8 Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 05/23] PCI: Remove old_size limit from bridge window sizing Ilpo Järvinen
2026-01-26 17:16 ` Bjorn Helgaas
2026-01-26 20:09 ` Bjorn Helgaas
2026-01-27 11:39 ` Ilpo Järvinen
2026-01-27 22:42 ` Bjorn Helgaas
2026-01-27 10:16 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 06/23] PCI: Push realloc check into pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 07/23] PCI: Pass bridge window resource to pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 08/23] PCI: Use res_to_dev_res() in reassign_resources_sorted() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 09/23] PCI: Fetch dev_res to local var in __assign_resources_sorted() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 10/23] PCI: Add pci_resource_is_bridge_win() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 11/23] PCI: Log reset and restore of resources Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 12/23] PCI: Check invalid align earlier in pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 13/23] PCI: Add pbus_mem_size_optional() to handle optional sizes Ilpo Järvinen
2026-07-07 15:42 ` Eric Auger
2026-07-07 16:12 ` Ilpo Järvinen
2026-07-08 8:08 ` Eric Auger [this message]
2026-07-08 9:28 ` Eric Auger
2026-07-08 14:05 ` Ilpo Järvinen
2026-07-08 15:39 ` Eric Auger
2026-07-09 9:04 ` Ilpo Järvinen
2026-07-09 14:29 ` Eric Auger
2026-07-09 14:50 ` Ilpo Järvinen
2026-07-10 12:43 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 14/23] resource: Mark res given to resource_assigned() as const Ilpo Järvinen
2025-12-19 17:47 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 15/23] PCI: Use resource_assigned() in setup-bus.c algorithm Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 16/23] PCI: Properly prefix struct pci_dev_resource handling functions Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 17/23] PCI: Separate cardbus setup & build it only with CONFIG_CARDBUS Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 18/23] PCI: Handle CardBus specific params in setup-cardbus.c Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 19/23] PCI: Use scnprintf() instead of sprintf() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 20/23] PCI: Add Bus Number + Secondary Latency Timer as dword fields Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 21/23] PCI: Convert to use Bus Number field defines Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 22/23] PCI: Add pbus_validate_busn() for Bus Number validation Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 23/23] PCI: Move scanbus bridge scanning to setup-cardbus.c Ilpo Järvinen
2026-01-26 17:39 ` [PATCH 00/23] PCI: Resource code fixes (supercedes earlier series) & cleanups Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=362cc52c-e489-4f5f-a21e-bc735c970912@redhat.com \
--to=eauger@redhat.com \
--cc=bhelgaas@google.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
--cc=myron.stowe@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox