From: "Jernej Škrabec" <jernej.skrabec@siol.net>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.xyz>
Subject: Re: [PATCH v2 04/11] drm: sun4i: add support for H3's TCON0/1
Date: Sun, 04 Jun 2017 20:46:24 +0200 [thread overview]
Message-ID: <3642057.oKT9kIlu8M@jernej-laptop> (raw)
In-Reply-To: <20170604160149.30230-5-icenowy@aosc.io>
Hi,
Dne nedelja, 04. junij 2017 ob 18:01:42 CEST je Icenowy Zheng napisal(a):
> From: Icenowy Zheng <icenowy@aosc.xyz>
>
> Allwinner H3 has two special TCONs, both come without channel0. And the
> TCON1 of H3 has no special clocks even for the channel1.
>
> Add support for these kinds of TCON.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> Changes in v2:
> - Merged TCON0 and TCON1 quirks and compatibles.
>
> drivers/gpu/drm/sun4i/sun4i_tcon.c | 52
> +++++++++++++++++++++++++------------- drivers/gpu/drm/sun4i/sun4i_tcon.h |
> 1 +
> 2 files changed, 36 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 568cea0e5f8f..62ba4fc19f18
> 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -59,6 +59,7 @@ void sun4i_tcon_channel_disable(struct sun4i_tcon *tcon,
> int channel)
>
> /* Disable the TCON's channel */
> if (channel == 0) {
> + WARN_ON(!tcon->quirks->has_channel_0);
> regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
> SUN4I_TCON0_CTL_TCON_ENABLE, 0);
> clk_disable_unprepare(tcon->dclk);
> @@ -78,6 +79,7 @@ void sun4i_tcon_channel_enable(struct sun4i_tcon *tcon,
> int channel)
>
> /* Enable the TCON's channel */
> if (channel == 0) {
> + WARN_ON(!tcon->quirks->has_channel_0);
> regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
> SUN4I_TCON0_CTL_TCON_ENABLE,
> SUN4I_TCON0_CTL_TCON_ENABLE);
> @@ -159,6 +161,7 @@ void sun4i_tcon0_mode_set(struct sun4i_tcon *tcon,
>
> /* Configure the dot clock */
> clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
> + WARN_ON(!tcon->quirks->has_channel_0);
>
> /* Adjust clock delay */
> clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
> @@ -366,10 +369,12 @@ static int sun4i_tcon_init_clocks(struct device *dev,
> }
> clk_prepare_enable(tcon->clk);
>
> - tcon->sclk0 = devm_clk_get(dev, "tcon-ch0");
> - if (IS_ERR(tcon->sclk0)) {
> - dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
> - return PTR_ERR(tcon->sclk0);
> + if (tcon->quirks->has_channel_0) {
> + tcon->sclk0 = devm_clk_get(dev, "tcon-ch0");
> + if (IS_ERR(tcon->sclk0)) {
> + dev_err(dev, "Couldn't get the TCON channel 0 clock\n");
> + return PTR_ERR(tcon->sclk0);
> + }
> }
>
> if (tcon->quirks->has_channel_1) {
> @@ -594,10 +599,12 @@ static int sun4i_tcon_bind(struct device *dev, struct
> device *master, goto err_free_clocks;
> }
>
> - ret = sun4i_dclk_create(dev, tcon);
> - if (ret) {
> - dev_err(dev, "Couldn't create our TCON dot clock\n");
> - goto err_free_clocks;
> + if (tcon->quirks->has_channel_0) {
> + ret = sun4i_dclk_create(dev, tcon);
> + if (ret) {
> + dev_err(dev, "Couldn't create our TCON dot clock\n");
> + goto err_free_clocks;
> + }
> }
>
> ret = sun4i_tcon_init_irq(dev, tcon);
> @@ -622,7 +629,8 @@ static int sun4i_tcon_bind(struct device *dev, struct
> device *master, return 0;
>
> err_free_dotclock:
> - sun4i_dclk_free(tcon);
> + if (tcon->quirks->has_channel_0)
> + sun4i_dclk_free(tcon);
> err_free_clocks:
> sun4i_tcon_free_clocks(tcon);
> err_assert_reset:
> @@ -636,7 +644,9 @@ static void sun4i_tcon_unbind(struct device *dev, struct
> device *master, struct sun4i_tcon *tcon = dev_get_drvdata(dev);
>
> list_del(&tcon->list);
> - sun4i_dclk_free(tcon);
> +
> + if (tcon->quirks->has_channel_0)
> + sun4i_dclk_free(tcon);
> sun4i_tcon_free_clocks(tcon);
> }
>
> @@ -667,24 +677,32 @@ static int sun4i_tcon_remove(struct platform_device
> *pdev) }
>
> static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
> - .has_unknown_mux = true,
> - .has_channel_1 = true,
> + .has_unknown_mux = true,
> + .has_channel_0 = true,
> + .has_channel_1 = true,
> };
>
> static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
> - .has_channel_1 = true,
> + .has_channel_0 = true,
> + .has_channel_1 = true,
> };
>
> static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
> - .has_channel_1 = true,
> + .has_channel_0 = true,
> + .has_channel_1 = true,
> };
>
> static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
> - /* nothing is supported */
> + .has_channel_0 = true,
> };
>
> static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
> - /* nothing is supported */
> + .has_channel_0 = true,
> +};
> +
> +static const struct sun4i_tcon_quirks sun8i_h3_quirks = {
> + .has_channel_1 = true,
> + .swappable_input = true,
> };
>
> static const struct of_device_id sun4i_tcon_of_table[] = {
> @@ -693,7 +711,7 @@ static const struct of_device_id sun4i_tcon_of_table[] =
> { { .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks
> }, { .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
> { .compatible = "allwinner,sun8i-v3s-tcon", .data = &sun8i_v3s_quirks },
> - { }
> + { .compatible = "allwinner,sun8i-h3-tcon", .data = &sun8i_h3_quirks },
I think you need to leave empty entry as a sentinel.
> };
> MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h
> b/drivers/gpu/drm/sun4i/sun4i_tcon.h index c3e01c06e9a0..9c706a0bd478
> 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
> @@ -145,6 +145,7 @@
>
> struct sun4i_tcon_quirks {
> bool has_unknown_mux; /* sun5i has undocumented mux */
> + bool has_channel_0; /* some A83T+ TCONs don't have channel 0*/
> bool has_channel_1; /* a33 does not have channel 1 */
> /* Some DE2 can swap the mixer<->TCON connection */
> bool swappable_input;
> --
> 2.12.2
You missed sun4i_rgb_init() function which should also be guarded with "if
(tcon->quirks->has_channel_0)".
You should also expand function sun4i_drv_node_is_tcon() at sun4i_drv.c with
new entries, but I'm not sure if this fits in this patch.
Best regards,
Jernej
next prev parent reply other threads:[~2017-06-04 18:46 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-04 16:01 [PATCH v2 00/11] Support for H3 Composite Output support Icenowy Zheng
2017-06-04 16:01 ` [PATCH v2 01/11] dt-bindings: update the binding for Allwinner H3 TVE support Icenowy Zheng
2017-06-07 8:45 ` Maxime Ripard
2017-06-07 8:48 ` Icenowy Zheng
2017-06-09 16:49 ` Maxime Ripard
2017-06-09 16:51 ` [linux-sunxi] " Icenowy Zheng
2017-06-09 21:24 ` Jernej Škrabec
2017-06-10 15:26 ` icenowy
2017-06-13 7:41 ` Maxime Ripard
2017-06-04 16:01 ` [PATCH v2 02/11] drm: sun4i: add support for H3 mixers Icenowy Zheng
2017-06-04 16:01 ` [PATCH v2 03/11] drm: sun4i: ignore swapped mixer<->tcon connection for DE2 Icenowy Zheng
2017-06-07 9:35 ` Maxime Ripard
2017-06-07 9:44 ` Icenowy Zheng
2017-06-07 10:01 ` Icenowy Zheng
2017-06-07 14:38 ` Maxime Ripard
2017-06-07 18:15 ` Jernej Škrabec
2017-06-09 14:45 ` Maxime Ripard
2017-06-08 5:01 ` icenowy
2017-06-09 14:46 ` Maxime Ripard
2017-06-10 14:57 ` icenowy
2017-06-10 15:16 ` icenowy
2017-06-13 9:46 ` Maxime Ripard
2017-06-13 9:43 ` Maxime Ripard
2017-06-13 10:05 ` Chen-Yu Tsai
2017-06-23 7:31 ` Maxime Ripard
2017-06-04 16:01 ` [PATCH v2 04/11] drm: sun4i: add support for H3's TCON0/1 Icenowy Zheng
2017-06-04 18:46 ` Jernej Škrabec [this message]
2017-06-04 19:03 ` Icenowy Zheng
2017-06-07 9:43 ` Maxime Ripard
2017-06-07 9:44 ` Icenowy Zheng
2017-06-07 14:19 ` Maxime Ripard
2017-06-07 14:21 ` Icenowy Zheng
2017-06-09 14:48 ` Maxime Ripard
2017-06-07 10:00 ` Icenowy Zheng
2017-06-04 22:43 ` kbuild test robot
2017-06-04 16:01 ` [PATCH v2 05/11] drm: sun4i: add compatible for H3 display engine Icenowy Zheng
2017-06-04 16:01 ` [PATCH v2 06/11] drm: sun4i: add color space correction support for DE2 mixer Icenowy Zheng
2017-06-04 16:01 ` [PATCH v2 07/11] drm: sun4i: add support for the TV encoder in H3 SoC Icenowy Zheng
2017-06-07 9:38 ` Maxime Ripard
2017-06-11 6:43 ` icenowy
2017-06-13 7:44 ` Maxime Ripard
2017-06-13 9:51 ` Icenowy Zheng
2017-06-23 14:44 ` Maxime Ripard
2017-06-04 16:01 ` [PATCH v2 08/11] clk: sunxi-ng: allow CLK_DE to set CLK_PLL_DE for H3 Icenowy Zheng
2017-06-04 16:01 ` [PATCH v2 09/11] clk: sunxi-ng: export " Icenowy Zheng
2017-06-04 16:01 ` [PATCH v2 10/11] ARM: sun8i: h3: add display engine pipeline for TVE Icenowy Zheng
2017-06-07 9:42 ` Maxime Ripard
2017-06-11 6:58 ` [linux-sunxi] " icenowy
2017-06-13 8:02 ` Maxime Ripard
2017-06-04 16:01 ` [PATCH v2 11/11] [DO NOT MERGE] ARM: sun8i: h3: enable TV output on Orange Pi PC Icenowy Zheng
2017-06-07 0:26 ` [PATCH v2 00/11] Support for H3 Composite Output support icenowy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3642057.oKT9kIlu8M@jernej-laptop \
--to=jernej.skrabec@siol.net \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=icenowy@aosc.io \
--cc=icenowy@aosc.xyz \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox