From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261647AbVF0Szx (ORCPT ); Mon, 27 Jun 2005 14:55:53 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261614AbVF0Syw (ORCPT ); Mon, 27 Jun 2005 14:54:52 -0400 Received: from wproxy.gmail.com ([64.233.184.196]:64376 "EHLO wproxy.gmail.com") by vger.kernel.org with ESMTP id S261591AbVF0SwR convert rfc822-to-8bit (ORCPT ); Mon, 27 Jun 2005 14:52:17 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=ZijQVMA8itSaJBPMoJ7P2pcdHh/m4CiicnltMkhLT4eyFbRl2O/fbgDF++aG1lB1zjOHYA/8s3UFUIskMCmoYPCOXHEms5tONFP0/JCmx2JS0ahP5ESj1aml6tkRiHDvieqZp/X6EtRpLL4UMBBhVyOgpyszHctazsSSALoa9JA= Message-ID: <3642108305062711524e1e163@mail.gmail.com> Date: Mon, 27 Jun 2005 11:52:16 -0700 From: Jim serio Reply-To: Jim serio To: linux-kernel@vger.kernel.org Subject: 2.6.X not recognizing second CPU Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I have an Intel SAI2 with 2 P3 1.0Ghz CPUs installed. BIOS is up to date and recognizes both CPUs. I installed RHEL4 which comes with 2.6.9-11 and, while it seems to recognize both CPUs, I get an error saying "CPU #0 not responding. Cannot use it". I tried 2.6.10, 11 and 12 with the same bad luck. For kicks, I tried 2.4.29 and it recognizes both CPUs. Googling and searching the kernel archives revelaed a few others with this same problem but no solutions. I tried disabling HUGE memory support (PAE). Tried noapic and force=acpi (together and separately). If anyone has some suggestions on how to resolve this issue, I would appreciate it. Jim Attached is the output of dmesg and cpuinfo for 2.6.12 . ----- dmesg ----- ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 2, version 17, address 0xfec01000, GSI 16-31 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c03db000 soft=c03bb000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 997.609 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1033672k/1048512k available (1824k kernel code, 14108k reserved, 744k data, 176k init, 131008k highmem) Calibrating delay loop... 1974.27 BogoMIPS (lpj=987136) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 0a per-CPU timeslice cutoff: 731.70 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/0 eip 3000 CPU 1 irqstacks, hard=c03dc000 soft=c03bc000 Not responding. Inquiring remote APIC #0... ... APIC #0 ID: 00000000 ... APIC #0 VERSION: 00040011 ... APIC #0 SPIV: 000000ff CPU #0 not responding - cannot use it. Total of 1 processors activated (1974.27 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. Brought up 1 CPUs zapping low mappings. checking if image is initramfs... it is Freeing initrd memory: 484k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9f0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (00:01) PCI: Probing PCI hardware (bus 01) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Link [IR1] (IRQs 5 10 11) *9 ACPI: PCI Interrupt Link [LN0E] (IRQs *14) ACPI: PCI Interrupt Link [LN0F] (IRQs *15) ACPI: PCI Interrupt Link [LN12] (IRQs *18) ACPI: PCI Interrupt Link [LN13] (IRQs *19) ACPI: PCI Interrupt Link [LN14] (IRQs *20) ACPI: PCI Interrupt Link [LN15] (IRQs *21) ACPI: PCI Interrupt Link [LN17] (IRQs *23) ACPI: PCI Interrupt Link [LN18] (IRQs *24) ACPI: PCI Interrupt Link [LN19] (IRQs *25) ACPI: PCI Interrupt Link [LN1A] (IRQs *26) ACPI: PCI Interrupt Link [LN1B] (IRQs *27) ACPI: PCI Interrupt Link [LN1C] (IRQs *28) ACPI: PCI Interrupt Link [LN1D] (IRQs *29) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 24 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 25 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [IR1] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 20 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 20 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 21 (level, low) -> IRQ 193 Simple Boot Flag at 0x7d set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1119541327.945:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key D67B3E6B1ED6FEC7 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Maximum main memory to use for agp memory: 941M agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.0 failed with error -22 agpgart: Maximum main memory to use for agp memory: 941M agpgart: unable to determine aperture size. agpgart: agp_backend_initialize() failed. agpgart-serverworks: probe of 0000:00:00.1 failed with error -22 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20269: IDE controller at PCI slot 0000:00:08.0 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 24 (level, low) -> IRQ 169 PDC20269: chipset revision 2 PDC20269: 100% native mode on irq 169 ide2: BM-DMA at 0x2400-0x2407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x2408-0x240f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: Maxtor 6Y250P0, ATA DISK drive Using cfq io scheduler ide2 at 0x2440-0x2447,0x2436 on irq 169 Probing IDE interface ide3... hdg: Maxtor 6Y250P0, ATA DISK drive ide3 at 0x2438-0x243f,0x2432 on irq 169 PDC20269: IDE controller at PCI slot 0000:00:09.0 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 25 (level, low) -> IRQ 177 PDC20269: chipset revision 2 PDC20269: 100% native mode on irq 177 ide4: BM-DMA at 0x2410-0x2417, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0x2418-0x241f, BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide4... hdi: Maxtor 6Y250P0, ATA DISK drive ide4 at 0x2458-0x245f,0x244e on irq 177 Probing IDE interface ide5... hdk: Maxtor 6B250R0, ATA DISK drive ide5 at 0x2450-0x2457,0x244a on irq 177 SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6B080P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: SAMSUNG CDRW/DVD SM-308B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hde: max request size: 1024KiB hde: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133) hde: cache flushes supported hde: hdg: max request size: 1024KiB hdg: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133) hdg: cache flushes supported hdg: hdi: max request size: 1024KiB hdi: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133) hdi: cache flushes supported hdi: hdk: max request size: 1024KiB hdk: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63, UDMA(133) hdk: cache flushes supported hdk: hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 64Kbytes TCP: Hash tables configured (established 131072 bind 43690) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: PCI0 RTC COMA LAN0 USB0 PCI1 Freeing unused kernel memory: 176k freed SCSI subsystem initialized ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 20 (level, low) -> IRQ 185 sym0: <1010-33> rev 0x1 at pci 0000:01:0a.0 irq 185 sym0: using 64 bit DMA addressing sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18j Vendor: EXABYTE Model: VXA 1x10 1U Rev: A102 Type: Medium Changer ANSI SCSI revision: 04 target0:0:2: Beginning Domain Validation target0:0:2: Domain Validation skipping write tests target0:0:2: Ending Domain Validation Vendor: EXABYTE Model: VXA-2 Rev: 2100 Type: Sequential-Access ANSI SCSI revision: 02 target0:0:3: Beginning Domain Validation sym0:3: wide asynchronous. sym0:3: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 30) target0:0:3: Domain Validation skipping write tests target0:0:3: Ending Domain Validation ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 20 (level, low) -> IRQ 185 sym1: <1010-33> rev 0x1 at pci 0000:01:0a.1 irq 185 sym1: using 64 bit DMA addressing sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking sym1: SCSI BUS has been reset. scsi1 : sym-2.1.18j Vendor: EXABYTE Model: VXA AutoPak 1x10 Rev: E36r Type: Medium Changer ANSI SCSI revision: 02 target1:0:5: Beginning Domain Validation target1:0:5: Ending Domain Validation Vendor: ECRIX Model: VXA-1 Rev: 1100 Type: Sequential-Access ANSI SCSI revision: 02 target1:0:6: Beginning Domain Validation sym1:6: wide asynchronous. sym1:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 30) target1:0:6: Domain Validation skipping write tests target1:0:6: Ending Domain Validation kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 8 Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 1 Attached scsi generic sg2 at scsi1, channel 0, id 5, lun 0, type 8 Attached scsi generic sg3 at scsi1, channel 0, id 6, lun 0, type 1 st: Version 20040403, fixed bufsize 32768, s/g segs 256 Attached scsi tape st0 at scsi0, channel 0, id 3, lun 0 st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 268435455 Attached scsi tape st1 at scsi1, channel 0, id 6, lun 0 st1: try direct i/o: yes (alignment 512 B), max page reachable by HBA 268435455 inserting floppy driver for 2.6.9-11.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 21 (level, low) -> IRQ 193 divert: allocating divert_blk for eth0 eth0: SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:0f.2: OHCI Host Controller ohci_hcd 0000:00:0f.2: irq 11, pci mem f8820000 ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET: Registered protocol family 10 Disabled Privacy Extensions on device c03356c0(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 mtrr: Serverworks LE detected. Write-combining disabled. mtrr: your processor doesn't support write-combining mtrr: Serverworks LE detected. Write-combining disabled. mtrr: your processor doesn't support write-combining ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] EXT3 FS on hda3, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm@uk.sistina.com cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096472k swap on /dev/hda2. Priority:-1 extents:1 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8191 buckets, 65528 max) - 340 bytes per conntrack eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: none irq moderation: disabled scatter-gather: enabled i2c /dev entries driver eth0: no IPv6 routers present mtrr: Serverworks LE detected. Write-combining disabled. mtrr: your processor doesn't support write-combining mtrr: Serverworks LE detected. Write-combining disabled. mtrr: your processor doesn't support write-combining sym0:2:0: ABORT operation started. sym0:2:control msgout: 80 6. sym0:2:0: ABORT operation complete. sym0: unexpected disconnect sym0:2:0: DEVICE RESET operation started. sym0:2:0: DEVICE RESET operation complete. sym0:2:control msgout: c. sym0: TARGET 2 has been reset. sym0:2:0: ABORT operation started. sym0:2:0: ABORT operation complete. sym0:2:0: BUS RESET operation started. sym0:2:0: BUS RESET operation complete. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. st0: Block limits 1 - 245760 bytes. sym0:2:0: ABORT operation started. sym0:2:control msgout: 80 6. sym0:2:0: ABORT operation complete. sym0: unexpected disconnect sym0:2:0: DEVICE RESET operation started. sym0:2:0: DEVICE RESET operation complete. sym0:2:control msgout: c. sym0: TARGET 2 has been reset. sym0:2:0: ABORT operation started. sym0:2:0: ABORT operation complete. sym0:2:0: BUS RESET operation started. sym0:2:0: BUS RESET operation complete. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. st1: Block limits 1 - 245760 bytes. sym0:2:0: ABORT operation started. sym0:2:control msgout: 80 6. sym0:2:0: ABORT operation complete. sym0: unexpected disconnect sym0:2:0: DEVICE RESET operation started. sym0:2:0: DEVICE RESET operation complete. sym0:2:control msgout: c. sym0: TARGET 2 has been reset. sym0:2:0: ABORT operation started. sym0:2:0: ABORT operation complete. sym0:2:0: BUS RESET operation started. sym0:2:0: BUS RESET operation complete. sym0: SCSI BUS reset detected. sym0: SCSI BUS has been reset. ----- ----- cpuinfo ----- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 10 cpu MHz : 997.609 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1974.27 -----