public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Manfred Spraul <manfreds@colorfullife.com>
To: Kanoj Sarcar <kanoj@google.engr.sgi.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>,
	viro@math.psu.edu, andrea@suse.de, linux-kernel@vger.rutgers.edu,
	mingo@chiara.csoma.elte.hu, linux-mm@kvack.org
Subject: Re: locking question: do_mmap(), do_munmap()
Date: Wed, 13 Oct 1999 09:32:54 +0200	[thread overview]
Message-ID: <380435A6.93B4B75A@colorfullife.com> (raw)
In-Reply-To: 199910130125.SAA66579@google.engr.sgi.com

Kanoj Sarcar wrote:
> Here's a primitive patch showing the direction I am thinking of. I do not
> have any problem with a spinning lock, but I coded this against 2.2.10,
> where insert_vm_struct could go to sleep, hence I had to use sleeping
> locks to protect the vma chain.

I found a few places where I don't know how to change them.

1) arch/mips/mm/r4xx0.c:
their flush_cache_range() function internally calls find_vma().
flush_cache_range() is called by proc/mem.c, and it seems that this
function cannot get the mmap semaphore.
Currently, every caller of flush_cache_range() either owns the kernel
lock or the mmap_sem.
OTHO, this function contains a race anyway [src_vma can go away if
handle_mm_fault() sleeps, src_vma is used at the end of the function.]

2) arch/sparc/mm/fault.c:
>    /* This conditional is 'interesting'. */
>         if (pgd_val(*pgdp) && !(write && !(pte_val(*ptep) & _SUN4C_PAGE_WRITE))
>             && (pte_val(*ptep) & _SUN4C_PAGE_VALID))
>                 /* Note: It is safe to not grab the MMAP semaphore here because
>                  *       we know that update_mmu_cache() will not sleep for
>                  *       any reason (at least not in the current implementation)
>                  *       and therefore there is no danger of another thread getting
>                  *       on the CPU and doing a shrink_mmap() on this vma.
>                  */
>                 sun4c_update_mmu_cache (find_vma(current->mm, address), address,
>                                         *ptep);
>         else
>                 do_sparc_fault(regs, text_fault, write, address);
> }
could be safe because sun4c is only UP?

3) include/ppc-asm/pgtable.h:
> extern __inline__ pte_t *find_pte(struct mm_struct *mm,unsigned long va)
> {
>         pgd_t *dir;
>         pmd_t *pmd;
>         pte_t *pte;
> 
>         va &= PAGE_MASK;
>         
>         dir = pgd_offset( mm, va );
>         if (dir)
>         {
>                 pmd = pmd_offset(dir, va & PAGE_MASK);
>                 if (pmd && pmd_present(*pmd))
>                 {
>                         pte = pte_offset(pmd, va);
>                         if (pte && pte_present(*pte))
>                         {                       
>                                 pte_uncache(*pte);
>                                 flush_tlb_page(find_vma(mm,va),va);
>                         }
>                 }
>         }
>         return pte;
> }
Could be safe because only called for "init_mm"?

I've not yet looked at swap_out [mm/swapfile.c and
arch/m68k/atari/stram.c] and proc/array.c

--
	Manfred


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

       reply	other threads:[~1999-10-13  8:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <199910130125.SAA66579@google.engr.sgi.com>
1999-10-13  7:32 ` Manfred Spraul [this message]
1999-10-15  9:58   ` locking question: do_mmap(), do_munmap() Ralf Baechle
1999-10-15 17:50     ` Kanoj Sarcar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=380435A6.93B4B75A@colorfullife.com \
    --to=manfreds@colorfullife.com \
    --cc=andrea@suse.de \
    --cc=kanoj@google.engr.sgi.com \
    --cc=linux-kernel@vger.rutgers.edu \
    --cc=linux-mm@kvack.org \
    --cc=mingo@chiara.csoma.elte.hu \
    --cc=sct@redhat.com \
    --cc=viro@math.psu.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox