public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Fengguang Wu <wfg@mail.ustc.edu.cn>
To: Andrew Morton <akpm@osdl.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] readahead: sanify file_ra_state names
Date: Thu, 14 Jun 2007 14:21:21 +0800	[thread overview]
Message-ID: <381802491.25968@ustc.edu.cn> (raw)
Message-ID: <20070614062816.085421580@mail.ustc.edu.cn> (raw)
In-Reply-To: 20070614062447.058708836@mail.ustc.edu.cn

[-- Attachment #1: readahead-rename.patch --]
[-- Type: text/plain, Size: 8154 bytes --]

Rename some file_ra_state variables and remove some accessors.

It results in much simpler code.
Kudos to Rusty!

Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
---
 include/linux/fs.h |   61 +++-----------------------------------
 mm/readahead.c     |   68 +++++++++++++++----------------------------
 2 files changed, 31 insertions(+), 98 deletions(-)

--- linux-2.6.22-rc4-mm2.orig/include/linux/fs.h
+++ linux-2.6.22-rc4-mm2/include/linux/fs.h
@@ -768,16 +768,12 @@ struct fown_struct {
 
 /*
  * Track a single file's readahead state
- *
- *  ================#============|==================#==================|
- *                  ^            ^                  ^                  ^
- *  file_ra_state.la_index    .ra_index   .lookahead_index   .readahead_index
  */
 struct file_ra_state {
-	pgoff_t la_index;               /* enqueue time */
-	pgoff_t ra_index;               /* begin offset */
-	pgoff_t lookahead_index;        /* time to do next readahead */
-	pgoff_t readahead_index;        /* end offset */
+	pgoff_t start;                  /* where readahead started */
+	unsigned long size;             /* # of readahead pages */
+	unsigned long async_size;       /* do asynchronous readahead when
+					   there are only # of pages ahead */
 
 	unsigned long ra_pages;		/* Maximum readahead window */
 	unsigned long mmap_hit;		/* Cache hit stat for mmap accesses */
@@ -787,59 +783,14 @@ struct file_ra_state {
 };
 
 /*
- * Measuring read-ahead sizes.
- *
- *                  |----------- readahead size ------------>|
- *  ===#============|==================#=====================|
- *     |------- invoke interval ------>|-- lookahead size -->|
- */
-static inline unsigned long ra_readahead_size(struct file_ra_state *ra)
-{
-	return ra->readahead_index - ra->ra_index;
-}
-
-static inline unsigned long ra_lookahead_size(struct file_ra_state *ra)
-{
-	return ra->readahead_index - ra->lookahead_index;
-}
-
-static inline unsigned long ra_invoke_interval(struct file_ra_state *ra)
-{
-	return ra->lookahead_index - ra->la_index;
-}
-
-/*
  * Check if @index falls in the readahead windows.
  */
 static inline int ra_has_index(struct file_ra_state *ra, pgoff_t index)
 {
-	return (index >= ra->la_index &&
-		index <  ra->readahead_index);
-}
-
-/*
- * Where is the old read-ahead and look-ahead?
- */
-static inline void ra_set_index(struct file_ra_state *ra,
-				pgoff_t la_index, pgoff_t ra_index)
-{
-	ra->la_index = la_index;
-	ra->ra_index = ra_index;
+	return (index >= ra->start &&
+		index <  ra->start + ra->size);
 }
 
-/*
- * Where is the new read-ahead and look-ahead?
- */
-static inline void ra_set_size(struct file_ra_state *ra,
-				unsigned long ra_size, unsigned long la_size)
-{
-	ra->readahead_index = ra->ra_index + ra_size;
-	ra->lookahead_index = ra->ra_index + ra_size - la_size;
-}
-
-unsigned long ra_submit(struct file_ra_state *ra,
-		       struct address_space *mapping, struct file *filp);
-
 struct file {
 	/*
 	 * fu_list becomes invalid after file_free is called and queued via
--- linux-2.6.22-rc4-mm2.orig/mm/readahead.c
+++ linux-2.6.22-rc4-mm2/mm/readahead.c
@@ -245,21 +245,16 @@ unsigned long max_sane_readahead(unsigne
 /*
  * Submit IO for the read-ahead request in file_ra_state.
  */
-unsigned long ra_submit(struct file_ra_state *ra,
+static unsigned long ra_submit(struct file_ra_state *ra,
 		       struct address_space *mapping, struct file *filp)
 {
-	unsigned long ra_size;
-	unsigned long la_size;
 	int actual;
 
-	ra_size = ra_readahead_size(ra);
-	la_size = ra_lookahead_size(ra);
 	actual = __do_page_cache_readahead(mapping, filp,
-					ra->ra_index, ra_size, la_size);
+					ra->start, ra->size, ra->async_size);
 
 	return actual;
 }
-EXPORT_SYMBOL_GPL(ra_submit);
 
 /*
  * Set the initial window size, round to next power of 2 and square
@@ -288,7 +283,7 @@ static unsigned long get_init_ra_size(un
 static unsigned long get_next_ra_size(struct file_ra_state *ra,
 						unsigned long max)
 {
-	unsigned long cur = ra->readahead_index - ra->ra_index;
+	unsigned long cur = ra->size;
 	unsigned long newsize;
 
 	if (cur < max / 16)
@@ -305,28 +300,21 @@ static unsigned long get_next_ra_size(st
  * The fields in struct file_ra_state represent the most-recently-executed
  * readahead attempt:
  *
- *                    |-------- last readahead window -------->|
- *       |-- application walking here -->|
- * ======#============|==================#=====================|
- *       ^la_index    ^ra_index          ^lookahead_index      ^readahead_index
- *
- * [ra_index, readahead_index) represents the last readahead window.
- *
- * [la_index, lookahead_index] is where the application would be walking(in
- * the common case of cache-cold sequential reads): the last window was
- * established when the application was at la_index, and the next window will
- * be bring in when the application reaches lookahead_index.
+ *                        |<----- async_size ---------|
+ *     |------------------- size -------------------->|
+ *     |==================#===========================|
+ *     ^start             ^page marked with PG_readahead
  *
  * To overlap application thinking time and disk I/O time, we do
  * `readahead pipelining': Do not wait until the application consumed all
  * readahead pages and stalled on the missing page at readahead_index;
- * Instead, submit an asynchronous readahead I/O as early as the application
- * reads on the page at lookahead_index. Normally lookahead_index will be
- * equal to ra_index, for maximum pipelining.
+ * Instead, submit an asynchronous readahead I/O as soon as there are
+ * only async_size pages left in the readahead window. Normally async_size
+ * will be equal to size, for maximum pipelining.
  *
  * In interleaved sequential reads, concurrent streams on the same fd can
  * be invalidating each other's readahead state. So we flag the new readahead
- * page at lookahead_index with PG_readahead, and use it as readahead
+ * page at (start+size-async_size) with PG_readahead, and use it as readahead
  * indicator. The flag won't be set on already cached pages, to avoid the
  * readahead-for-nothing fuss, saving pointless page cache lookups.
  *
@@ -355,24 +343,21 @@ ondemand_readahead(struct address_space 
 		   unsigned long req_size)
 {
 	unsigned long max;	/* max readahead pages */
-	pgoff_t ra_index;	/* readahead index */
-	unsigned long ra_size;	/* readahead size */
-	unsigned long la_size;	/* lookahead size */
 	int sequential;
 
 	max = ra->ra_pages;
 	sequential = (offset - ra->prev_index <= 1UL) || (req_size > max);
 
 	/*
-	 * Lookahead/readahead hit, assume sequential access.
+	 * It's the expected callback offset, assume sequential access.
 	 * Ramp up sizes, and push forward the readahead window.
 	 */
-	if (offset && (offset == ra->lookahead_index ||
-			offset == ra->readahead_index)) {
-		ra_index = ra->readahead_index;
-		ra_size = get_next_ra_size(ra, max);
-		la_size = ra_size;
-		goto fill_ra;
+	if (offset && (offset == (ra->start + ra->size - ra->async_size) ||
+			offset == (ra->start + ra->size))) {
+		ra->start += ra->size;
+		ra->size = get_next_ra_size(ra, max);
+		ra->async_size = ra->size;
+		goto readit;
 	}
 
 	/*
@@ -391,24 +376,21 @@ ondemand_readahead(struct address_space 
 	 * 	- oversize random read
 	 * Start readahead for it.
 	 */
-	ra_index = offset;
-	ra_size = get_init_ra_size(req_size, max);
-	la_size = ra_size > req_size ? ra_size - req_size : ra_size;
+	ra->start = offset;
+	ra->size = get_init_ra_size(req_size, max);
+	ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size;
 
 	/*
-	 * Hit on a lookahead page without valid readahead state.
+	 * Hit on a marked page without valid readahead state.
 	 * E.g. interleaved reads.
 	 * Not knowing its readahead pos/size, bet on the minimal possible one.
 	 */
 	if (hit_readahead_marker) {
-		ra_index++;
-		ra_size = min(4 * ra_size, max);
+		ra->start++;
+		ra->size = get_next_ra_size(ra, max);
 	}
 
-fill_ra:
-	ra_set_index(ra, offset, ra_index);
-	ra_set_size(ra, ra_size, la_size);
-
+readit:
 	return ra_submit(ra, mapping, filp);
 }
 

--

  parent reply	other threads:[~2007-06-14  6:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20070614062447.058708836@mail.ustc.edu.cn>
2007-06-14  6:21 ` [PATCH 0/2] ondemand readahead simplifications Fengguang Wu
     [not found] ` <20070614062815.949361167@mail.ustc.edu.cn>
2007-06-14  6:21   ` [PATCH 1/2] readahead: split ondemand readahead interface into two functions Fengguang Wu
     [not found] ` <20070614062816.085421580@mail.ustc.edu.cn>
2007-06-14  6:21   ` Fengguang Wu [this message]
2007-06-15  4:38   ` [PATCH 2/2] readahead: sanify file_ra_state names Rusty Russell
     [not found] <20070613134902.132573123@mail.ustc.edu.cn>
     [not found] ` <20070613135128.282288719@mail.ustc.edu.cn>
2007-06-13 13:49   ` Fengguang Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=381802491.25968@ustc.edu.cn \
    --to=wfg@mail.ustc.edu.cn \
    --cc=akpm@osdl.org \
    --cc=rusty@rustcorp.com.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox