* [PATCH] mailbox: qcom: Support building QCOM IPCC driver as module @ 2020-10-21 2:15 Huang Yiwei 2020-10-21 5:59 ` Manivannan Sadhasivam 0 siblings, 1 reply; 3+ messages in thread From: Huang Yiwei @ 2020-10-21 2:15 UTC (permalink / raw) To: jassisinghbrar, agross, bjorn.andersson Cc: Huang Yiwei, linux-kernel, linux-arm-msm Change CONFIG_QCOM_IPCC to tristate and add exit function to support module build for QCOM IPCC driver. Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org> --- drivers/mailbox/Kconfig | 2 +- drivers/mailbox/qcom-ipcc.c | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 05b1009..78f3006 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -245,7 +245,7 @@ config SPRD_MBOX you want to build the Spreatrum mailbox controller driver. config QCOM_IPCC - bool "Qualcomm Technologies, Inc. IPCC driver" + tristate "Qualcomm Technologies, Inc. IPCC driver" depends on ARCH_QCOM || COMPILE_TEST help Qualcomm Technologies, Inc. Inter-Processor Communication Controller diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c index 2d13c72..1ed9a87 100644 --- a/drivers/mailbox/qcom-ipcc.c +++ b/drivers/mailbox/qcom-ipcc.c @@ -280,6 +280,12 @@ static int __init qcom_ipcc_init(void) } arch_initcall(qcom_ipcc_init); +static __exit void qcom_ipcc_exit(void) +{ + platform_driver_unregister(&qcom_ipcc_driver); +} +module_exit(qcom_ipcc_exit); + MODULE_AUTHOR("Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>"); MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); MODULE_DESCRIPTION("Qualcomm Technologies, Inc. IPCC driver"); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] mailbox: qcom: Support building QCOM IPCC driver as module 2020-10-21 2:15 [PATCH] mailbox: qcom: Support building QCOM IPCC driver as module Huang Yiwei @ 2020-10-21 5:59 ` Manivannan Sadhasivam 2020-10-23 8:41 ` hyiwei 0 siblings, 1 reply; 3+ messages in thread From: Manivannan Sadhasivam @ 2020-10-21 5:59 UTC (permalink / raw) To: Huang Yiwei Cc: jassisinghbrar, agross, bjorn.andersson, linux-kernel, linux-arm-msm Hi, Please CC the driver maintainer(s) for relevant patches. For this driver, I've been listed as the maintainer in the MAINTAINERS file. On Wed, Oct 21, 2020 at 10:15:52AM +0800, Huang Yiwei wrote: > Change CONFIG_QCOM_IPCC to tristate and add exit function to > support module build for QCOM IPCC driver. > This is not going to work, sorry! There was a reason to make this driver built-in in the first place. This driver registers itself as an irqchip and provides interrupts to be consumed by the client drivers. So if we want to unload the driver, then we should make sure to dispose all irqs consumed by the client drivers and that's not possible currently. If you look into other irqchip drivers, they're all made as built-in. Thanks, Mani > Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org> > --- > drivers/mailbox/Kconfig | 2 +- > drivers/mailbox/qcom-ipcc.c | 6 ++++++ > 2 files changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig > index 05b1009..78f3006 100644 > --- a/drivers/mailbox/Kconfig > +++ b/drivers/mailbox/Kconfig > @@ -245,7 +245,7 @@ config SPRD_MBOX > you want to build the Spreatrum mailbox controller driver. > > config QCOM_IPCC > - bool "Qualcomm Technologies, Inc. IPCC driver" > + tristate "Qualcomm Technologies, Inc. IPCC driver" > depends on ARCH_QCOM || COMPILE_TEST > help > Qualcomm Technologies, Inc. Inter-Processor Communication Controller > diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c > index 2d13c72..1ed9a87 100644 > --- a/drivers/mailbox/qcom-ipcc.c > +++ b/drivers/mailbox/qcom-ipcc.c > @@ -280,6 +280,12 @@ static int __init qcom_ipcc_init(void) > } > arch_initcall(qcom_ipcc_init); > > +static __exit void qcom_ipcc_exit(void) > +{ > + platform_driver_unregister(&qcom_ipcc_driver); > +} > +module_exit(qcom_ipcc_exit); > + > MODULE_AUTHOR("Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>"); > MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); > MODULE_DESCRIPTION("Qualcomm Technologies, Inc. IPCC driver"); > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] mailbox: qcom: Support building QCOM IPCC driver as module 2020-10-21 5:59 ` Manivannan Sadhasivam @ 2020-10-23 8:41 ` hyiwei 0 siblings, 0 replies; 3+ messages in thread From: hyiwei @ 2020-10-23 8:41 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: jassisinghbrar, agross, bjorn.andersson, psodagud, linux-kernel, linux-arm-msm On 2020-10-21 13:59, Manivannan Sadhasivam wrote: > Hi, > > Please CC the driver maintainer(s) for relevant patches. For this > driver, > I've been listed as the maintainer in the MAINTAINERS file. > > On Wed, Oct 21, 2020 at 10:15:52AM +0800, Huang Yiwei wrote: >> Change CONFIG_QCOM_IPCC to tristate and add exit function to >> support module build for QCOM IPCC driver. >> > > This is not going to work, sorry! There was a reason to make this > driver > built-in in the first place. This driver registers itself as an irqchip > and > provides interrupts to be consumed by the client drivers. So if we want > to > unload the driver, then we should make sure to dispose all irqs > consumed by > the client drivers and that's not possible currently. If you look into > other > irqchip drivers, they're all made as built-in. > > Thanks, > Mani > Hi, We need the module build of IPCC to meet the need of Android GKI, which requires all vendor drivers to be modules. After discussion, we think there are three ways to achieve the goal: 1. Remove the exit function, just change the Kconfig to make it a module cannot be unloaded. 2. Add more checks to ensure the module can be unloaded safely. If user try to unload when it is in use, return busy. 3. If unable to change the Kconfig, we will have to ask google to make this driver built-in. This can be difficult because other vendors don't need this driver. We understood that mostly irqchip driver is builtin and not easy for unload. So we prefer the first way, that's the easiest and most reasonable way. Thanks, Yiwei >> Signed-off-by: Huang Yiwei <hyiwei@codeaurora.org> >> --- >> drivers/mailbox/Kconfig | 2 +- >> drivers/mailbox/qcom-ipcc.c | 6 ++++++ >> 2 files changed, 7 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig >> index 05b1009..78f3006 100644 >> --- a/drivers/mailbox/Kconfig >> +++ b/drivers/mailbox/Kconfig >> @@ -245,7 +245,7 @@ config SPRD_MBOX >> you want to build the Spreatrum mailbox controller driver. >> >> config QCOM_IPCC >> - bool "Qualcomm Technologies, Inc. IPCC driver" >> + tristate "Qualcomm Technologies, Inc. IPCC driver" >> depends on ARCH_QCOM || COMPILE_TEST >> help >> Qualcomm Technologies, Inc. Inter-Processor Communication >> Controller >> diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c >> index 2d13c72..1ed9a87 100644 >> --- a/drivers/mailbox/qcom-ipcc.c >> +++ b/drivers/mailbox/qcom-ipcc.c >> @@ -280,6 +280,12 @@ static int __init qcom_ipcc_init(void) >> } >> arch_initcall(qcom_ipcc_init); >> >> +static __exit void qcom_ipcc_exit(void) >> +{ >> + platform_driver_unregister(&qcom_ipcc_driver); >> +} >> +module_exit(qcom_ipcc_exit); >> + >> MODULE_AUTHOR("Venkata Narendra Kumar Gutta >> <vnkgutta@codeaurora.org>"); >> MODULE_AUTHOR("Manivannan Sadhasivam >> <manivannan.sadhasivam@linaro.org>"); >> MODULE_DESCRIPTION("Qualcomm Technologies, Inc. IPCC driver"); >> -- >> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >> a Linux Foundation Collaborative Project >> ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-10-23 8:41 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-10-21 2:15 [PATCH] mailbox: qcom: Support building QCOM IPCC driver as module Huang Yiwei 2020-10-21 5:59 ` Manivannan Sadhasivam 2020-10-23 8:41 ` hyiwei
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox