[PATCH] mmc: core: add runtime-resume caps to support resume at runtime

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume
@ 2015-02-05 11:06 Addy Ke
  2015-02-05 11:20 ` Heiko Stübner
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Addy Ke @ 2015-02-05 11:06 UTC (permalink / raw)
  To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
	tgih.jun, jh80.chung, chris, ulf.hansson, dinguyen, heiko, olof,
	dianders, sonnyrao, amstan
  Cc: devicetree, linux-doc, linux-kernel, linux-mmc, linux-arm-kernel,
	linux-rockchip, zhenfu.fang, cf, lintao, chenfen, zyf, xjq,
	huangtao, zyw, yzq, hj, kever.yang, zhangqing, hl, Addy Ke

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
---
 Documentation/devicetree/bindings/mmc/mmc.txt | 11 +++++++++++
 drivers/mmc/core/host.c                       |  2 ++
 2 files changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 438899e..303b448 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -40,9 +40,20 @@ Optional properties:
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
 - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
 - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
+- runtime-resume: resume at runtime_resume is supported
 - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
   programmed with. Valid range: [0 .. 0xffff].
 
+Card power and reset control:
+The following properties can be specified for cases where the MMC
+peripheral needs additional reset, regulator and clock lines. It is for
+example common for WiFi/BT adapters to have these separate from the main
+MMC bus:
+  - card-reset-gpios: Specify GPIOs for card reset (reset active low)
+  - card-external-vcc-supply: Regulator to drive (independent) card VCC
+  - clock with name "card_ext_clock": External clock provided to the card
+>>>>>>> 0064e63... FROMLIST: mmc: core: add runtime-resume caps to support resume at runtime_resume
+
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
 line levels. We choose to follow the SDHCI standard, which specifies both those
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 8be0df7..cb44c85 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -422,6 +422,8 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps |= MMC_CAP_POWER_OFF_CARD;
 	if (of_find_property(np, "cap-sdio-irq", &len))
 		host->caps |= MMC_CAP_SDIO_IRQ;
+	if (of_find_property(np, "runtime-resume", &len))
+		host->caps |= MMC_CAP_RUNTIME_RESUME;
 	if (of_find_property(np, "full-pwr-cycle", &len))
 		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
 	if (of_find_property(np, "keep-power-in-suspend", &len))
-- 
1.8.3.2



^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume
  2015-02-05 11:06 [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume Addy Ke
@ 2015-02-05 11:20 ` Heiko Stübner
  2015-02-05 11:27 ` Mark Rutland
  2015-02-05 11:50 ` [PATCH v2] " Addy Ke
  2 siblings, 0 replies; 4+ messages in thread
From: Heiko Stübner @ 2015-02-05 11:20 UTC (permalink / raw)
  To: Addy Ke
  Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
	tgih.jun, jh80.chung, chris, ulf.hansson, dinguyen, olof,
	dianders, sonnyrao, amstan, devicetree, linux-doc, linux-kernel,
	linux-mmc, linux-arm-kernel, linux-rockchip, zhenfu.fang, cf,
	lintao, chenfen, zyf, xjq, huangtao, zyw, yzq, hj, kever.yang,
	zhangqing, hl

Hi Addy,

Am Donnerstag, 5. Februar 2015, 19:06:59 schrieb Addy Ke:
> Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
> ---
>  Documentation/devicetree/bindings/mmc/mmc.txt | 11 +++++++++++
>  drivers/mmc/core/host.c                       |  2 ++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt
> b/Documentation/devicetree/bindings/mmc/mmc.txt index 438899e..303b448
> 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc.txt
> @@ -40,9 +40,20 @@ Optional properties:
>  - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
>  - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
>  - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
> +- runtime-resume: resume at runtime_resume is supported
>  - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
>    programmed with. Valid range: [0 .. 0xffff].
> 
> +Card power and reset control:
> +The following properties can be specified for cases where the MMC
> +peripheral needs additional reset, regulator and clock lines. It is for
> +example common for WiFi/BT adapters to have these separate from the main
> +MMC bus:
> +  - card-reset-gpios: Specify GPIOs for card reset (reset active low)
> +  - card-external-vcc-supply: Regulator to drive (independent) card VCC
> +  - clock with name "card_ext_clock": External clock provided to the card
> +>>>>>>> 0064e63... FROMLIST: mmc: core: add runtime-resume caps to support

you seem to have missed some merge artifacts here because your patch should 
probably only insert the one runtime-resume line above.


Heiko


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume
  2015-02-05 11:06 [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume Addy Ke
  2015-02-05 11:20 ` Heiko Stübner
@ 2015-02-05 11:27 ` Mark Rutland
  2015-02-05 11:50 ` [PATCH v2] " Addy Ke
  2 siblings, 0 replies; 4+ messages in thread
From: Mark Rutland @ 2015-02-05 11:27 UTC (permalink / raw)
  To: Addy Ke
  Cc: robh+dt@kernel.org, Pawel Moll, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, rdunlap@infradead.org, tgih.jun@samsung.com,
	jh80.chung@samsung.com, chris@printf.net, ulf.hansson@linaro.org,
	dinguyen@altera.com, heiko@sntech.de, olof@lixom.net,
	dianders@chromium.org, sonnyrao@chromium.org, amstan@chromium.org,
	devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, zhenfu.fang@rock-chips.com,
	cf@rock-chips.com, lintao@rock-chips.com, chenfen@rock-chips.com,
	zyf@rock-chips.com, xjq@rock-chips.com, huangtao@rock-chips.com,
	zyw@rock-chips.com, yzq@rock-chips.com, hj@rock-chips.com,
	kever.yang@rock-chips.com, zhangqing@rock-chips.com,
	hl@rock-chips.com

On Thu, Feb 05, 2015 at 11:06:59AM +0000, Addy Ke wrote:
> Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
> ---
>  Documentation/devicetree/bindings/mmc/mmc.txt | 11 +++++++++++
>  drivers/mmc/core/host.c                       |  2 ++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
> index 438899e..303b448 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc.txt
> @@ -40,9 +40,20 @@ Optional properties:
>  - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
>  - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
>  - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
> +- runtime-resume: resume at runtime_resume is supported

This reads like description of Linux internals (runtime_resume), which
shouldn't be in the DT.

What does this mean at the HW level? I'm sure we can find a better name
for this, or another way of describing this.

>  - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
>    programmed with. Valid range: [0 .. 0xffff].
>  
> +Card power and reset control:
> +The following properties can be specified for cases where the MMC
> +peripheral needs additional reset, regulator and clock lines. It is for
> +example common for WiFi/BT adapters to have these separate from the main
> +MMC bus:
> +  - card-reset-gpios: Specify GPIOs for card reset (reset active low)
> +  - card-external-vcc-supply: Regulator to drive (independent) card VCC
> +  - clock with name "card_ext_clock": External clock provided to the card

Are these proeprties placed on the MMC controller node, or a sub-node
representing the card/slot?

Thanks,
Mark.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v2] mmc: core: add runtime-resume caps to support resume at runtime_resume
  2015-02-05 11:06 [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume Addy Ke
  2015-02-05 11:20 ` Heiko Stübner
  2015-02-05 11:27 ` Mark Rutland
@ 2015-02-05 11:50 ` Addy Ke
  2 siblings, 0 replies; 4+ messages in thread
From: Addy Ke @ 2015-02-05 11:50 UTC (permalink / raw)
  To: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, rdunlap,
	tgih.jun, jh80.chung, chris, ulf.hansson, dinguyen, heiko, olof,
	dianders, sonnyrao, amstan
  Cc: devicetree, linux-doc, linux-kernel, linux-mmc, linux-arm-kernel,
	linux-rockchip, zhenfu.fang, cf, lintao, chenfen, zyf, xjq,
	huangtao, zyw, yzq, hj, kever.yang, zhangqing, hl, Addy Ke

Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
---
Changes in v2:
 - fix some typo 

 Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
 drivers/mmc/core/host.c                       | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 438899e..a7b800e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -40,6 +40,7 @@ Optional properties:
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
 - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
 - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
+- runtime-resume: resume at runtime_resume is supported
 - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
   programmed with. Valid range: [0 .. 0xffff].
 
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 8be0df7..cb44c85 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -422,6 +422,8 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps |= MMC_CAP_POWER_OFF_CARD;
 	if (of_find_property(np, "cap-sdio-irq", &len))
 		host->caps |= MMC_CAP_SDIO_IRQ;
+	if (of_find_property(np, "runtime-resume", &len))
+		host->caps |= MMC_CAP_RUNTIME_RESUME;
 	if (of_find_property(np, "full-pwr-cycle", &len))
 		host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
 	if (of_find_property(np, "keep-power-in-suspend", &len))
-- 
1.8.3.2



^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2015-02-05 11:51 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-05 11:06 [PATCH] mmc: core: add runtime-resume caps to support resume at runtime_resume Addy Ke
2015-02-05 11:20 ` Heiko Stübner
2015-02-05 11:27 ` Mark Rutland
2015-02-05 11:50 ` [PATCH v2] " Addy Ke

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox