* [RFC] Packet-Shaping-HOWTO
@ 2000-03-25 15:28 Martijn van Oosterhout
0 siblings, 0 replies; only message in thread
From: Martijn van Oosterhout @ 2000-03-25 15:28 UTC (permalink / raw)
To: linux kernel
Hello people,
Recently I've had occasion to try to make the QoS and queueing
code from the 2.2 kernel to work for me, but found the
documentation to be a bit technical and not really aimed for
users. So, I've summed up my experience with the packet
shaping and stuffed it all into a HOWTO.
However some of it is still guess work since there are some
concepts going on here that I still don't get. No matter,
I would just like people to read over it to see if I got
it right.
Note that this is specifically 2.2, I don't know if
2.[34] is the same.
http://cupid.suninternet.com/~kleptog/Packet-Shaping-HOWTO.html
Please CC any replies.
--
Martijn van Oosterhout <kleptog@cupid.suninternet.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-03-25 15:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-03-25 15:28 [RFC] Packet-Shaping-HOWTO Martijn van Oosterhout
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox