Re: [PATCH v2 5/5] arm64: dts: imx: add imx95 dts for sof

[Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>]

On 11/13/2024 10:21 PM, Frank Li wrote:
> On Wed, Nov 13, 2024 at 02:52:40PM -0500, Laurentiu Mihalcea wrote:
>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>
>> Add imx95 DTS for SOF usage.
>>
>> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>> ---
>>  arch/arm64/boot/dts/freescale/Makefile        |  1 +
>>  .../dts/freescale/imx95-19x19-evk-sof.dts     | 74 +++++++++++++++++++
> look like it should be dt overlay.
ah, interesting idea, but I don't really see its usage here? As far as I was able to understand the overlays are used to dynamically change the DTB (via u-boot), which we don't really need at the moment.

>
>>  2 files changed, 75 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
>>
>> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
>> index 42e6482a31cb..0a313133d013 100644
>> --- a/arch/arm64/boot/dts/freescale/Makefile
>> +++ b/arch/arm64/boot/dts/freescale/Makefile
>> @@ -269,6 +269,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
>>  dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
>>  dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
>> +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
>>
>>  imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
>> new file mode 100644
>> index 000000000000..3fa4c252e355
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk-sof.dts
>> @@ -0,0 +1,74 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright 2024 NXP
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "imx95-19x19-evk.dts"
>> +
>> +/ {
>> +	reserved-memory {
>> +		adma_res: memory@86100000 {
>> +			compatible = "shared-dma-pool";
>> +			reg = <0x0 0x86100000 0x0 0x100000>;
>> +			no-map;
>> +		};
>> +	};
>> +
>> +	sound-wm8962 {
>> +		status = "disabled";
>> +	};
>> +
>> +	sof-sound-wm8962 {
>> +		compatible = "audio-graph-card2";
>> +		links = <&cpu>;
>> +		label = "wm8962-audio";
>> +		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&pinctrl_hp>;
>> +		widgets =
>> +			"Headphone", "Headphones",
>> +			"Microphone", "Headset Mic";
>> +		routing =
>> +			"Headphones", "HPOUTL",
>> +			"Headphones", "HPOUTR",
>> +			"Headset Mic", "MICBIAS",
>> +			"IN3R", "Headset Mic",
>> +			"IN1R", "Headset Mic";
>> +	};
>> +
>> +	sof_cpu: cm7-cpu@80000000 {
>> +		compatible = "fsl,imx95-cm7-sof";
>> +		reg = <0x0 0x80000000 0x0 0x6100000>;
>> +		memory-region = <&adma_res>;
>> +		mboxes = <&mu7 2 0>, <&mu7 2 1>, <&mu7 3 0>, <&mu7 3 1>;
>> +		mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
>> +		cpu: port {
>> +			cpu_ep: endpoint { remote-endpoint = <&codec_ep>; };
>> +		};
>> +	};
> please sort by node name.
Fix in v3

>
>> +};
>> +
>> +&edma2 {
>> +	dma-channel-mask = <0xc0000000>, <0x0>;
>> +};
> Why need change dma mask here ?
Channels 30 and 31 are reserved for firmware usage

>
>> +
>> +&sai3 {
>> +	status = "disabled";
>> +};
>> +
>> +&wm8962 {
>> +	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
>> +			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
>> +			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
>> +			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
>> +			  <&scmi_clk IMX95_CLK_SAI3>;
>> +	assigned-clock-parents = <0>, <0>, <0>, <0>, <&scmi_clk IMX95_CLK_AUDIOPLL1>;
>> +	assigned-clock-rates = <3932160000>, <3612672000>,
>> +			       <393216000>, <361267200>,
>> +			       <12288000>;
>> +	port {
>> +		codec_ep: endpoint { remote-endpoint = <&cpu_ep>; };
>> +	};
>> +};
>> --
>> 2.34.1
>>