kernel 2.4.0-test9 nd bttv

kernel 2.4.0-test9 nd bttv

[vwbug]

it look like you didn't add the lines to .config the stupid bttv drivers
that's why mine didnt work with bttv card i have read the .config under
video for linux  and found no refernce to bttv???

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: kernel 2.4.0-test9 nd bttv

[Erik Mouw]

On Sun, Oct 29, 2000 at 09:01:21PM -0500, vwbug wrote:
> it look like you didn't add the lines to .config the stupid bttv drivers
> that's why mine didnt work with bttv card i have read the .config under
> video for linux  and found no refernce to bttv???

I'm not sure if this is what you mean, but you have to enable I2C
support and I2C bit-banging interfaces to be able to select BT848
support.


Erik
[happily using his BT848 card under 2.4.0-test10-pre3]

-- 
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031,  2600 GA Delft, The Netherlands
Phone: +31-15-2783635  Fax: +31-15-2781843  Email: J.A.K.Mouw@its.tudelft.nl
WWW: http://www-ict.its.tudelft.nl/~erik/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/