Hi,

I tried 2.4.0test10, but I get a kernel oops quite often.  I have
configured my kernel for raid and smp ... autodetected raid, in the
kernel everything, so no raid modules necessary.  But when I go to boot,
it starts to reconstruct the raid array and fsck the /dev/md0 and
eventually it just crashes on me.  Kernel oops. A message like:

"Detected LOCKUP on CPU0"
or sometimes its CPU1...

If I dont use raid its cool, if I remove smp its also cool.  So the
particular combination of raid+smp seems to be the problem.  

My hardware is :
Asus P2B-D, 2 PII-400
128 mb ram in 2 * 64 dimms (pc100)
Matrox G400 singlehead.
Enqsonique ENS1371
Realtek 8029 Ethernet card (ne2k-pci )


I have included my config that causes this problem.

Incidently mga DRI doesnt work either in either SMP or non-SMP
kernels... it just locks up the console, the system is still running.
maybe I'm missing something?

My software resembes Debian woody, 
gcc --version:
2.95.2


Hope this helps.

-ryan
(PS: my raid array is from a 2.2.16 patched with the latest raid patches
for that kernel... debian raidtools2 uses this patch, so its the "latest
one".  I'm not sure how relevant this is)