Re: test11-pre6 still very broken

[Ben Ford <bford@talontech.com>]

[-- Attachment #1: Type: text/plain, Size: 1773 bytes --]

Here is lspci output from the laptop in question.  Is this not UHCI?

[ben@Juanita ben]$ /sbin/lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
00:09.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01)
00:0a.0 CardBus bridge: Texas Instruments: Unknown device ac50 (rev 01)
00:11.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev
02)
00:12.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP
2x (rev 64)

The machine hangs on warm reboot almost every time.  On cold boot, it never has
the problem.

-b



Greg KH wrote:

> On Fri, Nov 17, 2000 at 09:27:19PM -0800, David Ford wrote:
> >
> > The second issue is usb.  I now have two machines that lockup on boot in USB.
> > One is the above workstation, the second is a Compaq laptop.  Unfortunately
> > I have no way of unplugging the USB hardware inside the laptop :P
>
> Can't you not compile in the UHCI driver?  Actually, it seems odd that a
> Compaq laptop would have a uhci driver, as Compaq was one of the OHCI
> creators...
>
> greg k-h
>
> --
> greg@(kroah|wirex).com
> http://immunix.org/~greg
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 2616 bytes --]