aic7xxx

[Mathias Wiklander <eastbay@linux.se>]

Hi!

I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When
ever I try to load it as a module or if I compile it in the kernel I get
the folowing error messages. The last 4 messages repeats for ever. The
problem is on 3 diffrent machines. Anyone who know what it can be and
how to fix it. 

/Eastbay

(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/19/0
(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Cables present (Int-50 NO, Ext-50 NO)
(scsi0) Downloading sequencer code... 415 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
       <Adaptec AHA-294X SCSI host adapter>
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Inquiry 00 00 00 ff 00 
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/