Re: aic7xxx

stewart
2000-12-17T08:10:54Z

I am also having problems with this driver, but with different adapters
and symptoms. depmod is reporting a lot of unresolved symbols for generic
scsi and scsi cdrom. Compiling it into the kernel instead of as a module
seems to bypass the problems.

stewart

On Sun, 17 Dec 2000, Mathias Wiklander wrote:

> Hi!
>
> I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When
> ever I try to load it as a module or if I compile it in the kernel I get
> the folowing error messages. The last 4 messages repeats for ever. The
> problem is on 3 diffrent machines. Anyone who know what it can be and
> how to fix it.
>
> /Eastbay
>
> (scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/19/0
> (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
> (scsi0) Cables present (Int-50 NO, Ext-50 NO)
> (scsi0) Downloading sequencer code... 415 instructions downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
> <Adaptec AHA-294X SCSI host adapter>
> scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
> lun 0 Inquiry 00 00 00 ff 00
> SCSI host 0 abort (pid 0) timed out - resetting
> SCSI bus is being reset for host 0 channel 0.
> SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
> SCSI bus is being reset for host 0 channel 0.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/