Re: aic7xxx

Mathias Wiklander
2000-12-17T09:40:15Z

That's not the case for me. When I build it in to the kernel, the kernel
comes tho the init of thje board then these lines repeats forever.

SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.

/Mathias

stewart@neuron.com wrote:
>
> I am also having problems with this driver, but with different adapters
> and symptoms. depmod is reporting a lot of unresolved symbols for generic
> scsi and scsi cdrom. Compiling it into the kernel instead of as a module
> seems to bypass the problems.
>
> stewart
>
> On Sun, 17 Dec 2000, Mathias Wiklander wrote:
>
> > Hi!
> >
> > I have problem using my scsi card. It is an Adaptec 2940 (SCSI2). When
> > ever I try to load it as a module or if I compile it in the kernel I get
> > the folowing error messages. The last 4 messages repeats for ever. The
> > problem is on 3 diffrent machines. Anyone who know what it can be and
> > how to fix it.
> >
> > /Eastbay
> >
> > (scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 0/19/0
> > (scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs
> > (scsi0) Cables present (Int-50 NO, Ext-50 NO)
> > (scsi0) Downloading sequencer code... 415 instructions downloaded
> > scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
> > <Adaptec AHA-294X SCSI host adapter>
> > scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
> > lun 0 Inquiry 00 00 00 ff 00
> > SCSI host 0 abort (pid 0) timed out - resetting
> > SCSI bus is being reset for host 0 channel 0.
> > SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
> > SCSI bus is being reset for host 0 channel 0.
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > Please read the FAQ at http://www.tux.org/lkml/
> >