From: David Ford <david@linux.com>
To: LKML <linux-kernel@vger.kernel.org>
Subject: NETDEV WATCHDOG: eth0: transmit timed out
Date: Thu, 28 Dec 2000 02:43:14 -0800 [thread overview]
Message-ID: <3A4B1942.D00CF7E4@linux.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 744 bytes --]
Same old story, bugger still does it. Have to set the link down/up to
get it running again. I had to reset two systems tonight, one up for
~60 days, one up for two days. Both have this card. Unrelated traffic.
This is kernel 2.4.0-test13-pre4
00:12.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev
20)
Subsystem: Unknown device 1385:f004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 set
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f800
Region 1: Memory at fdfffc00 (32-bit, non-prefetchable)
-d
[-- Attachment #2: Card for David Ford --]
[-- Type: text/x-vcard, Size: 274 bytes --]
begin:vcard
n:Ford;David
x-mozilla-html:TRUE
url:www.blue-labs.org
adr:;;;;;;
version:2.1
email;internet:david@blue-labs.org
title:Blue Labs Developer
note;quoted-printable:GPG key: http://www.blue-labs.org/david@nifty.key=0D=0A
x-mozilla-cpt:;9952
fn:David Ford
end:vcard
next reply other threads:[~2000-12-28 11:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-28 10:43 David Ford [this message]
-- strict thread matches above, loose matches on Subject: below --
2000-12-28 11:26 NETDEV WATCHDOG: eth0: transmit timed out Manfred
2000-12-28 11:36 ` David Ford
2000-12-29 0:30 ` idalton
2001-01-13 2:24 Darryl Miles
2001-03-01 16:59 Caleb Epstein
2001-03-01 23:01 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A4B1942.D00CF7E4@linux.com \
--to=david@linux.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox