[PATCH] 8139too.c patch to allow setting of MAC address to actually work.

[Ben Greear <greearb@candelatech.com>]

This was gleaned from conversations with Donald Becker w/regard
to why:   ifconfig eth1 hw ether a:b:c:d:e:f
fails to work with the RTL drivers.

This fixes the problem, at least on my machine:

(The new line has ### in front of it..)

8139too.c, line 1229, from kernel 2.4.prerelease:

	/* Check that the chip has finished the reset. */
	for (i = 1000; i > 0; i--)
		if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
			break;

	/* Restore our idea of the MAC address. */
###        RTL_W8_F  (Cfg9346, 0xC0); /* Fix provided by Becker */
	RTL_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
	RTL_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));


The 2.2.18 driver is broken too, but I think Donald is going to send
the fixes for it.

Thanks,
Ben

-- 
Ben Greear (greearb@candelatech.com)  http://www.candelatech.com
Author of ScryMUD:  scry.wanfear.com 4444        (Released under GPL)
http://scry.wanfear.com               http://scry.wanfear.com/~greear
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/