From: "John O'Donnell" <johnod@voicefx.com>
To: Vojtech Pavlik <vojtech@suse.cz>, linux-kernel@vger.kernel.org
Subject: Re: [preview] VIA IDE driver v3.11 with vt82c686b UDMA100 support
Date: Wed, 10 Jan 2001 14:34:16 -0500 [thread overview]
Message-ID: <3A5CB938.9090203@voicefx.com> (raw)
In-Reply-To: <20010110124524.A2154@suse.cz>
Vojtech Pavlik wrote:
> Hi!
>
> For all of you who had problems getting the VIA IDE driver to work
> correctly on the 686b, here is a driver that should work with those
> chips, even in UDMA 100 mode. I've not tested it, because I don't have
> the 686b myself. So it may eat your filesystem as well.
>
> Good luck!
Oops - I did not look close enough. I have the 686a.
Well, it works the same :-)
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (cf/cg) IDE UDMA66 controller on pci0:4.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD450AA-00BAA0, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 9100, ATAPI CDROM drive
hdd: LS-120 VER5 00 UHD Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 87930864 sectors (45021 MB) w/2048KiB Cache, CHS=5473/255/63, UDMA(33)
hdd: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
Timing tests are the same....
--
<SomeLamer> what's the difference between chattr and chmod?
<SomeGuru> SomeLamer: man chattr > 1; man chmod > 2; diff -u 1 2 | less
-- Seen on #linux on irc
=== Never ask a geek why, just nod your head and slowly back away.===
+==============================+====================================+
| John O'Donnell (Sr. Systems Engineer, Net Admin, Webmaster, etc.) |
| Voice FX Corporation (a subsidiary of Student Advantage) |
| One Plymouth Meeting | E-Mail: johnod@voicefx.com |
| Suite 610 | www.voicefx.com |
| Plymouth Meeting, PA 19462 | www.campusdirect.com |
+==============================+====================================+
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-10 19:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-10 11:45 [preview] VIA IDE driver v3.11 with vt82c686b UDMA100 support Vojtech Pavlik
2001-01-10 19:34 ` John O'Donnell [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-01-17 14:38 Chandler, Alan
2001-01-17 15:03 ` [preview] " Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A5CB938.9090203@voicefx.com \
--to=johnod@voicefx.com \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox