From: TimO <hairballmt@mcn.net>
To: Vojtech Pavlik <vojtech@suse.cz>
Cc: linux-kernel@vger.kernel.org
Subject: Re: ide.2.4.1-p3.01112001.patch
Date: Sat, 13 Jan 2001 20:41:00 -0700 [thread overview]
Message-ID: <3A611FCC.931D8CA0@mcn.net> (raw)
In-Reply-To: <20010112212427.A2829@suse.cz> <Pine.LNX.4.10.10101121604080.8097-100000@penguin.transmeta.com> <20010113150046.E1155@suse.cz>
Vojtech Pavlik wrote:
>
> Ok, here goes the patch.
>
> Note that with this patch, all VIA users will get IDE transferrates
> about 3 MB/sec as opposed to about 20 MB/sec without it (and with
> UDMA66).
>
> This patch disables automatic DMA on all VIA chipsets, including the
> ancient 82c561 for 486's, and up to the 686a UDMA66 chipset.
>
> Also note that enabling the DMA later with hdparm -X66 -d1 or similar
> command is not safe, and usually works by pure luck on VIA chipsets.
> This however, would need some non-minor changes to the generic code to
> fix.
>
> But perhaps it's still worth ...
>
> --
> Vojtech Pavlik
> SuSE Labs
>
>
_ouch_ Will -X66 -d1c1m16 be as stable with this patch as version 2.1e
has been for me?? It has always (auto)set transfer speeds properly and
I have never seen corruption with my 686a -- 'cept when patching from
test11-pre7 to test12-pre1, and I'm pretty sure that was from other
factors.
===============
-- Tim
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-14 3:40 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-12 8:44 ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-12 8:55 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-12 17:51 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 18:13 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-12 18:37 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 21:26 ` ide.2.4.1-p3.01112001.patch Adrian Bunk
2001-01-12 18:17 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-12 18:55 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 19:46 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-12 19:57 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 20:24 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-12 23:47 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-13 13:45 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 17:09 ` ide.2.4.1-p3.01112001.patch Bryan O'Sullivan
2001-01-13 17:19 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 0:09 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-13 0:25 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-12 16:43 ` ide.2.4.1-p3.01112001.patch John Heil
2001-01-13 0:52 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-12 17:09 ` ide.2.4.1-p3.01112001.patch John Heil
2001-01-13 1:16 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-15 10:15 ` ide.2.4.1-p3.01112001.patch Matthias Andree
2001-01-13 1:12 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 1:18 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-13 1:24 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 1:31 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-13 1:48 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 1:51 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 14:02 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 14:00 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 19:46 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-13 20:00 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-14 3:41 ` TimO [this message]
2001-01-14 8:55 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-15 13:06 ` ide.2.4.1-p3.01112001.patch Stephen Clark
[not found] ` <Pine.LNX.4.30.0101130559060.19743-100000@wr5z.localdomain>
2001-01-13 14:22 ` VIA IDE corruption - anyone experiencing it with 2.4.0? Vojtech Pavlik
2001-01-12 23:43 ` ide.2.4.1-p3.01112001.patch Alan Cox
2001-01-13 2:43 ` ide.2.4.1-p3.01112001.patch davej
2001-01-13 13:42 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 3:03 ` ide.2.4.1-p3.01112001.patch Tkil
2001-01-13 13:44 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-13 13:35 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-14 19:38 ` ide.2.4.1-p3.01112001.patch Jamie Lokier
2001-01-14 22:39 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-15 0:06 ` ide.2.4.1-p3.01112001.patch Albert Cranford
2001-01-15 23:47 ` ide.2.4.1-p3.01112001.patch Henrique de Moraes Holschuh
2001-01-15 1:13 ` ide.2.4.1-p3.01112001.patch Jamie Lokier
2001-01-13 22:06 ` ide.2.4.1-p3.01112001.patch junio
2001-01-13 7:12 ` ide.2.4.1-p3.01112001.patch Andre Hedrick
2001-01-13 16:42 ` ide.2.4.1-p3.01112001.patch David Woodhouse
2001-01-13 17:04 ` ide.2.4.1-p3.01112001.patch Linus Torvalds
2001-01-14 17:22 ` ide.2.4.1-p3.01112001.patch David Woodhouse
2001-01-13 18:54 ` ide.2.4.1-p3.01112001.patch Russell King
2001-01-12 8:56 ` ide.2.4.1-p3.01112001.patch Craig Schlenter
-- strict thread matches above, loose matches on Subject: below --
2001-01-13 23:40 ide.2.4.1-p3.01112001.patch Andrzej Krzysztofowicz
2001-01-14 8:46 ` ide.2.4.1-p3.01112001.patch Vojtech Pavlik
2001-01-14 3:53 ide.2.4.1-p3.01112001.patch Tony Parsons
2001-01-14 8:31 ` ide.2.4.1-p3.01112001.patch David D.W. Downey
2001-01-14 9:03 ` ide.2.4.1-p3.01112001.patch David D.W. Downey
2001-01-15 10:29 ` ide.2.4.1-p3.01112001.patch Paul Flinders
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A611FCC.931D8CA0@mcn.net \
--to=hairballmt@mcn.net \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox