need help raid and 2.4.0

need help raid and 2.4.0

[david]

hi i am moving from 2.2.18 to 2.4.0 i have a ide raid set but can not
get it to run under 2.4.0
i user mdadd / mdrun to config it. in raid-tools 0.42 but it dose not
come up under 2.4.0 it just says unknow devices /dev/hda3 & /dev/hdc3
but thay are thear and when i try to compile raid-tools .53 undir 2.4.0
i get a lot of error in string.h (i am runing debian 2.2r2)
i configured the kernel

can someone help me i am reconfigering my raid set and i have a big
drive to hold the data but i only have it for 1 day

thank you
    David Rundle <sector2@ihug.co.nz>





-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

Re: need help raid and 2.4.0

[Thomas Dodd]

david wrote:
> 
> hi i am moving from 2.2.18 to 2.4.0 i have a ide raid set but can not
> get it to run under 2.4.0
> i user mdadd / mdrun to config it. in raid-tools 0.42 but it dose not
> come up under 2.4.0 it just says unknow devices /dev/hda3 & /dev/hdc3
> but thay are thear and when i try to compile raid-tools .53 undir 2.4.0
> i get a lot of error in string.h (i am runing debian 2.2r2)
> i configured the kernel

First, did the IDE driver detect the disks/partitions listed?
what does /proc/partitions, /proc/modules, and /proc/ioports
show in 2.4.0?

I switched from 2.2.x -> 2.4.0 with IDE RAID disks fine.
Using the RedHat7.0 default of raidtool-0.90
Try building the newer raidtools and make sure to use the
correct kernel headers (the ones for 2.4.0)

	-Thomas
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/