From: David Balazic <david.balazic@uni-mb.si>
To: Linux Kernel ML <linux-kernel@vger.kernel.org>
Cc: Matti Aarnio <matti.aarnio@zmailer.org>
Subject: Re: Linux not adhering to BIOS Drive boot order?
Date: Thu, 18 Jan 2001 17:55:49 +0100 [thread overview]
Message-ID: <3A672015.B69F7E90@uni-mb.si> (raw)
Matti Aarnio (matti.aarnio@zmailer.org) wrote :
> On Wed, Jan 17, 2001 at 08:22:22PM +0100, Werner Almesberger wrote:
> > The only cases when you really need to know the name of a disk is when
> > - doing disk-level management, e.g. partitioning or creating file
> > systems (*)
> > - adding a swap partition (sigh)
> > - telling your boot loader where to put its boot sector
>
> 2.4.0 with devfs mounted at boot time into /dev/
>
> Only thing missing is that here /dev/scsi/host0/ propably should be
> a symlink to something like /dev/bus/pci/BB/II.F ...
> Or perhaps /dev/scsi/BUS/BB/II.F/busN/targetT/lunL/partP
> but mixing in ISA-bus controllers is somewhat tough..
>
> $ mount
> /dev/scsi/host0/bus0/target0/lun0/part3 on / type ext2 (rw)
> /dev/scsi/host0/bus0/target2/lun0/part2 on /home type ext2 (rw)
> /dev/scsi/host0/bus0/target0/lun0/part4 on /usr type ext2 (rw)
> /dev/scsi/host0/bus0/target2/lun0/part1 on /usr/src type ext2 (rw)
> /dev/scsi/host0/bus0/target0/lun0/part1 on /boot type ext2 (rw)
> I do, of course, use mounting with LABEL=
>
> This new style (which contains, hopefully, physical PCI location)
> mount device paths will failry easily handle question about which
> is where... And the partitions are PHYSICAL partition numbers,
> not some logical ones. That is true with /dev/sdXP case as well
> as with /dev/hdXP case.
What is the difference between physical and logical partitions ?
How does this solve the "I deleted hda5 and now the old hda6 became
hda5"
problem ?
--
David Balazic
--------------
"Be excellent to each other." - Bill & Ted
- - - - - - - - - - - - - - - - - - - - - -
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-01-18 16:56 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-18 16:55 David Balazic [this message]
2001-01-18 19:49 ` Linux not adhering to BIOS Drive boot order? Tim Fletcher
-- strict thread matches above, loose matches on Subject: below --
2001-01-18 16:36 Andries.Brouwer
2001-01-18 11:01 David Balazic
2001-01-18 11:35 ` Tim Fletcher
2001-01-18 13:01 ` Xavier Bestel
2001-01-18 14:03 ` Tim Fletcher
2001-01-17 11:04 David Balazic
2001-01-17 10:56 David Balazic
2001-01-17 10:48 David Balazic
2001-01-17 23:23 ` Andreas Dilger
2001-01-18 10:14 ` David Balazic
2001-01-17 10:21 David Balazic
2001-01-17 10:28 ` Boszormenyi Zoltan
2001-01-16 22:54 Venkatesh Ramamurthy
2001-01-16 20:35 Venkatesh Ramamurthy
2001-01-16 20:14 Venkatesh Ramamurthy
2001-01-16 20:30 ` Dr. Kelsey Hudson
2001-01-16 21:18 ` Andreas Dilger
2001-01-17 15:33 ` Mike Porter
2001-01-17 16:16 ` James Bottomley
2001-01-17 17:07 ` Craig Ruff
2001-01-18 12:50 ` Peter Samuelson
2001-01-18 17:59 ` idalton
2001-01-18 18:14 ` Peter Samuelson
2001-01-18 20:53 ` Matti Aarnio
2001-01-18 22:55 ` David Weinehall
2001-01-16 17:39 Venkatesh Ramamurthy
2001-01-16 17:58 ` David Woodhouse
2001-01-16 21:11 ` Andreas Dilger
2001-01-17 9:38 ` David Woodhouse
2001-01-17 9:55 ` Jeff Garzik
2001-01-17 10:19 ` Andreas Dilger
2001-01-17 10:02 ` David Woodhouse
2001-01-19 1:17 ` H. Peter Anvin
2001-01-17 10:12 ` Andreas Dilger
2001-01-17 23:19 ` Russell King
2001-01-17 19:50 ` Werner Almesberger
2001-01-17 20:43 ` Andreas Dilger
2001-01-18 0:14 ` Tim Fletcher
2001-01-18 0:39 ` Andreas Dilger
2001-01-18 0:59 ` Tim Fletcher
2001-01-18 9:41 ` Helge Hafting
2001-01-16 17:30 Bryan Henderson
2001-01-16 17:04 David Balazic
[not found] <Venkateshr@ami.com>
2001-01-16 16:56 ` Venkatesh Ramamurthy
2001-01-16 19:52 ` John Summerfield
2001-01-16 16:51 Venkatesh Ramamurthy
2001-01-16 17:09 ` Honza Pazdziora
2001-01-16 16:46 Venkatesh Ramamurthy
2001-01-16 16:43 Venkatesh Ramamurthy
2001-01-16 20:01 ` Dr. Kelsey Hudson
2001-01-16 20:37 ` Michael Meissner
2001-01-16 21:01 ` Andi Kleen
2001-01-16 21:23 ` Michael Meissner
2001-01-16 23:32 ` J . A . Magallon
2001-01-17 0:05 ` Dr. Kelsey Hudson
2001-01-17 0:42 ` Michael Meissner
2001-01-17 2:14 ` Peter Samuelson
2001-01-17 17:22 ` Michael Meissner
2001-01-17 18:41 ` Douglas Gilbert
2001-01-17 9:45 ` Ishikawa
2001-01-17 15:45 ` J . A . Magallon
2001-01-16 23:51 ` Dr. Kelsey Hudson
2001-01-17 19:22 ` Werner Almesberger
2001-01-17 20:32 ` Matti Aarnio
2001-01-17 20:46 ` Werner Almesberger
2001-01-17 21:26 ` Dr. Kelsey Hudson
2001-01-16 16:35 Venkatesh Ramamurthy
2001-01-16 17:04 ` Brian Gerst
2001-01-16 17:24 ` Eddie Williams
2001-01-16 18:22 ` Timur Tabi
2001-01-16 19:18 ` Matthew D. Pitts
2001-01-16 19:54 ` Christopher Friesen
2001-01-16 21:04 ` Timur Tabi
2001-01-16 22:51 ` Peter Samuelson
2001-01-16 16:31 Venkatesh Ramamurthy
2001-01-16 16:53 ` Eddie Williams
2001-01-16 19:48 ` John Summerfield
2001-01-16 16:19 Venkatesh Ramamurthy
2001-01-16 16:23 ` Florent Cueto
2001-01-16 16:31 ` Brian Gerst
2001-01-16 16:40 ` Dominik Kubla
2001-01-16 15:49 Venkatesh Ramamurthy
2001-01-16 16:06 ` David Woodhouse
2001-01-16 16:27 ` Arjan van de Ven
2001-01-16 16:40 ` Matthias Andree
2001-01-16 16:45 ` Douglas Gilbert
2001-01-16 17:38 ` Malahal Rao Naineni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A672015.B69F7E90@uni-mb.si \
--to=david.balazic@uni-mb.si \
--cc=linux-kernel@vger.kernel.org \
--cc=matti.aarnio@zmailer.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox