Re: ATAPI CD burner with cdrecord > 1.6.1

Re: ATAPI CD burner with cdrecord > 1.6.1

[Jocelyn Mayer]

> Kernel version is 2.4.1. For versions of cdrecord later than 1.6.1
> (1.8.1 through the latest 1.10 alpha verified), attempting to burn a
> CD results in a SCSI error of some kind. Here's some representative
> output from a "dummy" burn session with cdrecord-1.9: 

> As I recall, things work just fine with a real SCSI CD burner, so I
> think this behavior is limited to the ide-scsi flavor of things. If
> anyone has a clue as to what's really happening here, a fix or workaround
> would be appreciated. In the meantime, I'll continue to use the older
> software (xcdroast-0.96e with cdrecord-1.6.1). Thanks! 

Well...
Maybe I'm not a lucky guy,
but I just got the same trouble with a real SCSI burner...
This one is a Yamaha 8416,
attached to a Tekram UW controleur.
The error I got is exactly the same.
I got this since kernel version 2.4.0-test12, I think.

Jocelyn Mayer
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

ATAPI CD burner with cdrecord > 1.6.1

[Bob_Tracy]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UNKNOWN-8BIT, Size: 2678 bytes --]

Kernel version is 2.4.1.  For versions of cdrecord later than 1.6.1
(1.8.1 through the latest 1.10 alpha verified), attempting to burn a
CD results in a SCSI error of some kind.  Here's some representative
output from a "dummy" burn session with cdrecord-1.9:


Calling: /usr/local/lib/xcdroast-0.98/bin/cdrecord dev=0,1,0 fs=4096k  -v -useinfo speed=4 -dao -dummy -eject -pad -data "/u3/superrescue/superrescue-1.2.3.raw" ...

pregap1: -1
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 7200 '
Revision       : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  498 MB         padsize:  30 KB
Total size:     572 MB (56:41.28) = 255096 sectors
Lout start:     572 MB (56:43/21) = 255096 sectors
Current Secsize: 2048
ATIP start of lead in:  -11754 (97:25/21)
ATIP start of lead out: 335100 (74:30/00)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 8
Manufacturer: Hitachi Maxell, Ltd.
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 80004
RBlocks total: 346013 RBlocks current: 346013 RBlocks remaining: 90917
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
CDB:  55 10 00 00 00 00 00 00 3C 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.023s timeout 200s
cdrecord: Warning: using default CD write parameter data.
cdrecord: Cannot open new session.
Mode Select Data 00 10 00 00 05 32 12 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cdrecord: fifo had 64 puts and 0 gets.

As I recall, things work just fine with a real SCSI CD burner, so I
think this behavior is limited to the ide-scsi flavor of things.  If
anyone has a clue as to what's really happening here, a fix or workaround
would be appreciated.  In the meantime, I'll continue to use the older
software (xcdroast-0.96e with cdrecord-1.6.1).  Thanks!

-- 
Bob Tracy
rct@frus.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/