From: Jocelyn Mayer <jocelyn.mayer@netgem.com>
To: Ionut.Dumitrache@imar.ro
Cc: linux-kernel@vger.kernel.org
Subject: Re: i82562ET LAN (i815) timeout/lockup with eepro100 driver
Date: Wed, 21 Feb 2001 14:11:45 +0100 [thread overview]
Message-ID: <3A93BE91.3030603@netgem.com> (raw)
>
>
> The integrated LAN on Intel boards with i815 chipset
> apparently is not fully supported. In latest 2.2.x and 2.4.x,
> with the EtherExpress Pro100 driver, after some network traffic,
> it locks. The only way I can use the net again is either reboot,
> or ifconfig eth0 down; ifconfig eth0 up.
> I attached the syslog output;
>
> The driver detects the chip as 82562EM although the mainboard
> manual states that it has an integrated i82562ET chip.
>
> Board: Intel D815EEA with onboard LAN, video,audio
>
Well, I'm using such a board these weeks,
without any problems, with a 2.4.0 kernel.
To solve the second point you talk about,
I submitted a little patch, some times ago,
so all the devices of this motherboard can be correctly
detected by Linux.
You can notice that the Ethernet function
is inside 82801BA Chips,
according to what Intel says in their datasheets.
Regards.
Jocelyn Mayer.
--- pci.ids-orig Wed Jan 3 01:58:45 2001
+++ pci.ids Tue Feb 13 23:29:58 2001
@@ -4484,6 +4484,16 @@
1014 0119 Netfinity Gigabit Ethernet SX Adapter
8086 1000 EtherExpress PRO/1000 Gigabit Server Adapter
1030 82559 InBusiness 10/100
+ 1100 82815 Chipset GMCH / FSB DRAM Controler
+ 1101 82815 Chipset AGP/PCI Bridge
+ 1102 82815 Chipset Internal Graphic Device
+ 1110 82815 Chipset GMCH / FSB DRAM Controler [no AGP]
+ 1112 82815 Chipset Internal Graphic Device [no AGP]
+ 1120 82815 Chipset GMCH / FSB DRAM Controler [AGP only]
+ 1121 82815 Chipset AGP/PCI Bridge [AGP only]
+ 1130 82815 Chipset GMCH / FSB DRAM Controler
+ 1131 82815 Chipset AGP/PCI Bridge
+ 1132 82815 Chipset Internal Graphic Device
1161 82806AA PCI64 Hub Advanced Programmable Interrupt Controller
1209 82559ER
1221 82092AA_0
@@ -4584,13 +4594,18 @@
11d4 0048 SoundMAX Integrated Digital Audio
2426 82801AB AC'97 Modem
2428 82801AB PCI Bridge
- 2440 82820 820 (Camino 2) Chipset ISA Bridge (ICH2)
- 2442 82820 820 (Camino 2) Chipset USB (Hub A)
- 2443 82820 820 (Camino 2) Chipset SMBus
- 2444 82820 820 (Camino 2) Chipset USB (Hub B)
- 2449 82820 820 (Camino 2) Chipset Ethernet
- 244b 82820 820 (Camino 2) Chipset IDE U100
- 244e 82820 820 (Camino 2) Chipset PCI
+ 2440 82801BA (ICH2) Chipset Multi-purpose IO / Interrupt controler
+ 2442 82801BA (ICH2) Chipset USB (Hub A)
+ 2443 82801BA (ICH2) Chipset SMBus
+ 2444 82801BA (ICH2) Chipset USB (Hub B)
+ 2445 82801BA (ICH2) Chipset AC'97 Audio
+ 2446 82801BA (ICH2) Chipset Ac'97 Modem
+ 2448 82801BAM (ICH2-M) Chipset PCI Bridge
+ 2449 82801BA (ICH2) Chipset Ethernet
+ 244a 82801BAM (ICH2-M) Chipset IDE U100
+ 244b 82801BA (ICH2) Chipset IDE U100
+ 244c 82801BAM (ICH2-M) Multi-purpose IO / Interrupt controler
+ 244e 82801 (ICH2) Chipset PCI Bridge
2500 82820 820 (Camino) Chipset Host Bridge (MCH)
1043 801c P3C-2000 system chipset
2501 82820 820 (Camino) Chipset Host Bridge (MCH)
-
next reply other threads:[~2001-02-21 13:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-21 13:11 Jocelyn Mayer [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-02-19 18:32 i82562ET LAN (i815) timeout/lockup with eepro100 driver Ionut Dumitrache
2001-02-22 21:08 ` Andrey Savochkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3A93BE91.3030603@netgem.com \
--to=jocelyn.mayer@netgem.com \
--cc=Ionut.Dumitrache@imar.ro \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox