* downloading drive firmware to a fibre channel drive through linux
@ 2001-02-21 20:11 hiren_mehta
0 siblings, 0 replies; 2+ messages in thread
From: hiren_mehta @ 2001-02-21 20:11 UTC (permalink / raw)
To: linux-kernel
Hi,
Is it possible to download a drive firmware to a fibre channel
drive (or even a scsi drive) through linux ? I know that on
NT (or 98) they use WNASPI and a utility provided by the
drive manufacturer to download the firmware. I was wondering
if this is possible through linux scsi interface. For FC,
I have Qlogic Fibre Channel card.
Thanks and regards,
-hiren
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: downloading drive firmware to a fibre channel drive through linux
@ 2001-02-21 22:19 Douglas Gilbert
0 siblings, 0 replies; 2+ messages in thread
From: Douglas Gilbert @ 2001-02-21 22:19 UTC (permalink / raw)
To: linux-kernel; +Cc: hiren_mehta, linux-scsi
hiren_mehta@agilent.com wrote:
> Is it possible to download a drive firmware to a fibre channel
> drive (or even a scsi drive) through linux ? I know that on
> NT (or 98) they use WNASPI and a utility provided by the
> drive manufacturer to download the firmware. I was wondering
> if this is possible through linux scsi interface. For FC,
> I have Qlogic Fibre Channel card.
Yes. It is one of the advertised features of the Scsi Command
Utility (scu). There is a Linux port. See:
http://www.bit-net.com/~rmiller/scu.html
Doug Gilbert
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-02-21 22:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-02-21 22:19 downloading drive firmware to a fibre channel drive through linux Douglas Gilbert
-- strict thread matches above, loose matches on Subject: below --
2001-02-21 20:11 hiren_mehta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox