From: root <jellison@speakeasy.org>
To: linux-kernel@vger.kernel.org
Subject: [Fwd: Problem at Kernel Configuring!!!!]
Date: Sat, 10 Mar 2001 06:25:21 -0500 [thread overview]
Message-ID: <3AAA0F21.51EB55B2@speakeasy.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: Type: message/rfc822, Size: 8495 bytes --]
[-- Attachment #2.1.1: Type: text/plain, Size: 512 bytes --]
Hi,
I am sending an output the last part kernel configuring. I have read and
applied "Changes" which went successful. In configuring kernel, I did
make xconfig, make dep, and make clean which was successful.
But when I did a "make bzImage" that when I ran into problems. "Make
bzImage" stop with an error.
I am using Athlon 700mg/hz, 15g HD. I am running kernel 2.2.16 and
distributor is Redhat.
Could this be a bug in the new 2.4.2?
My email address is jellison@speakeasy.org
Thanks,
Jonathan Ellison
[-- Attachment #2.1.2: nohup.out --]
[-- Type: text/plain, Size: 7191 bytes --]
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2 -march=athlon -c -o init/main.o init/main.c
In file included from /usr/src/linux/include/linux/irq.h:58,
from /usr/src/linux/include/asm/hardirq.h:7,
from /usr/src/linux/include/linux/interrupt.h:46,
from /usr/src/linux/include/asm/string.h:297,
from /usr/src/linux/include/linux/string.h:22,
from /usr/src/linux/include/linux/fs.h:24,
from /usr/src/linux/include/linux/capability.h:18,
from /usr/src/linux/include/linux/binfmts.h:6,
from /usr/src/linux/include/linux/sched.h:10,
from /usr/src/linux/include/linux/mm.h:5,
from /usr/src/linux/include/linux/slab.h:15,
from /usr/src/linux/include/linux/proc_fs.h:6,
from init/main.c:16:
/usr/src/linux/include/asm/hw_irq.h: In function `x86_do_profile':
/usr/src/linux/include/asm/hw_irq.h:198: `current' undeclared (first use in this function)
/usr/src/linux/include/asm/hw_irq.h:198: (Each undeclared identifier is reported only once
/usr/src/linux/include/asm/hw_irq.h:198: for each function it appears in.)
In file included from /usr/src/linux/include/asm/string.h:297,
from /usr/src/linux/include/linux/string.h:22,
from /usr/src/linux/include/linux/fs.h:24,
from /usr/src/linux/include/linux/capability.h:18,
from /usr/src/linux/include/linux/binfmts.h:6,
from /usr/src/linux/include/linux/sched.h:10,
from /usr/src/linux/include/linux/mm.h:5,
from /usr/src/linux/include/linux/slab.h:15,
from /usr/src/linux/include/linux/proc_fs.h:6,
from init/main.c:16:
/usr/src/linux/include/linux/interrupt.h: In function `raise_softirq':
/usr/src/linux/include/linux/interrupt.h:89: `current' undeclared (first use in this function)
/usr/src/linux/include/linux/interrupt.h: In function `tasklet_schedule':
/usr/src/linux/include/linux/interrupt.h:160: `current' undeclared (first use in this function)
/usr/src/linux/include/linux/interrupt.h: In function `tasklet_hi_schedule':
/usr/src/linux/include/linux/interrupt.h:174: `current' undeclared (first use in this function)
In file included from /usr/src/linux/include/linux/string.h:22,
from /usr/src/linux/include/linux/fs.h:24,
from /usr/src/linux/include/linux/capability.h:18,
from /usr/src/linux/include/linux/binfmts.h:6,
from /usr/src/linux/include/linux/sched.h:10,
from /usr/src/linux/include/linux/mm.h:5,
from /usr/src/linux/include/linux/slab.h:15,
from /usr/src/linux/include/linux/proc_fs.h:6,
from init/main.c:16:
/usr/src/linux/include/asm/string.h: In function `__constant_memcpy3d':
/usr/src/linux/include/asm/string.h:305: `current' undeclared (first use in this function)
/usr/src/linux/include/asm/string.h: In function `__memcpy3d':
/usr/src/linux/include/asm/string.h:312: `current' undeclared (first use in this function)
In file included from /usr/src/linux/include/linux/raid/md.h:51,
from init/main.c:25:
/usr/src/linux/include/linux/raid/md_k.h: In function `pers_to_level':
/usr/src/linux/include/linux/raid/md_k.h:39: warning: control reaches end of non-void function
make: *** [init/main.o] Error 1
gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2 -march=athlon -c -o init/main.o init/main.c
In file included from /usr/src/linux/include/linux/irq.h:58,
from /usr/src/linux/include/asm/hardirq.h:7,
from /usr/src/linux/include/linux/interrupt.h:46,
from /usr/src/linux/include/asm/string.h:297,
from /usr/src/linux/include/linux/string.h:22,
from /usr/src/linux/include/linux/fs.h:24,
from /usr/src/linux/include/linux/capability.h:18,
from /usr/src/linux/include/linux/binfmts.h:6,
from /usr/src/linux/include/linux/sched.h:10,
from /usr/src/linux/include/linux/mm.h:5,
from /usr/src/linux/include/linux/slab.h:15,
from /usr/src/linux/include/linux/proc_fs.h:6,
from init/main.c:16:
/usr/src/linux/include/asm/hw_irq.h: In function `x86_do_profile':
/usr/src/linux/include/asm/hw_irq.h:198: `current' undeclared (first use in this function)
/usr/src/linux/include/asm/hw_irq.h:198: (Each undeclared identifier is reported only once
/usr/src/linux/include/asm/hw_irq.h:198: for each function it appears in.)
In file included from /usr/src/linux/include/asm/string.h:297,
from /usr/src/linux/include/linux/string.h:22,
from /usr/src/linux/include/linux/fs.h:24,
from /usr/src/linux/include/linux/capability.h:18,
from /usr/src/linux/include/linux/binfmts.h:6,
from /usr/src/linux/include/linux/sched.h:10,
from /usr/src/linux/include/linux/mm.h:5,
from /usr/src/linux/include/linux/slab.h:15,
from /usr/src/linux/include/linux/proc_fs.h:6,
from init/main.c:16:
/usr/src/linux/include/linux/interrupt.h: In function `raise_softirq':
/usr/src/linux/include/linux/interrupt.h:89: `current' undeclared (first use in this function)
/usr/src/linux/include/linux/interrupt.h: In function `tasklet_schedule':
/usr/src/linux/include/linux/interrupt.h:160: `current' undeclared (first use in this function)
/usr/src/linux/include/linux/interrupt.h: In function `tasklet_hi_schedule':
/usr/src/linux/include/linux/interrupt.h:174: `current' undeclared (first use in this function)
In file included from /usr/src/linux/include/linux/string.h:22,
from /usr/src/linux/include/linux/fs.h:24,
from /usr/src/linux/include/linux/capability.h:18,
from /usr/src/linux/include/linux/binfmts.h:6,
from /usr/src/linux/include/linux/sched.h:10,
from /usr/src/linux/include/linux/mm.h:5,
from /usr/src/linux/include/linux/slab.h:15,
from /usr/src/linux/include/linux/proc_fs.h:6,
from init/main.c:16:
/usr/src/linux/include/asm/string.h: In function `__constant_memcpy3d':
/usr/src/linux/include/asm/string.h:305: `current' undeclared (first use in this function)
/usr/src/linux/include/asm/string.h: In function `__memcpy3d':
/usr/src/linux/include/asm/string.h:312: `current' undeclared (first use in this function)
In file included from /usr/src/linux/include/linux/raid/md.h:51,
from init/main.c:25:
/usr/src/linux/include/linux/raid/md_k.h: In function `pers_to_level':
/usr/src/linux/include/linux/raid/md_k.h:39: warning: control reaches end of non-void function
make: *** [init/main.o] Error 1
next reply other threads:[~2001-03-10 11:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-10 11:25 root [this message]
2001-03-10 13:11 ` [Fwd: Problem at Kernel Configuring!!!!] J . A . Magallon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3AAA0F21.51EB55B2@speakeasy.org \
--to=jellison@speakeasy.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox