* 2.4.2-acXX hangs on boot if IrDA is in kernel
@ 2001-03-20 10:31 Alessandro Suardi
0 siblings, 0 replies; only message in thread
From: Alessandro Suardi @ 2001-03-20 10:31 UTC (permalink / raw)
To: alan; +Cc: linux-kernel
Hi Alan,
tried as you suggested to config out IrDA and indeed the kernel boots.
Even in -ac20 my Dell Latitude laptop hangs in the RH7.0 init sequence
after printing the IRCOMM line. C-A-D doesn't do anything but I can use
Magic Sysrq to reboot.
I am available for further diagnostic investigation. Just in case, this
is my IrDA h/w (booted into 2.4.3-pre4).
[root@princess /root]# findchip -v
Found SMC FDC37N958FR Controller at 0x3f0, DevID=0x01, Rev. 1
SIR Base 0x3e8, FIR Base 0x290
IRQ = 4, DMA = 3
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 3 us
Thanks & ciao,
--alessandro <alessandro.suardi@oracle.com> <asuardi@uninetcom.it>
Linux: kernel 2.2.19p17/2.4.3p4 glibc-2.2 gcc-2.96-69 binutils-2.11.90.0.1
Oracle: Oracle8i 8.1.7.0.1 Enterprise Edition for Linux
motto: Tell the truth, there's less to remember.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-03-20 10:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-20 10:31 2.4.2-acXX hangs on boot if IrDA is in kernel Alessandro Suardi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox