From: Nicholas Petreley <nicholas@petreley.com>
To: ignaciomonge@navegalia.com, linux-kernel@vger.kernel.org
Subject: Re: ATA 100
Date: Wed, 18 Apr 2001 23:01:41 -0700 [thread overview]
Message-ID: <3ADE7F45.2030205@petreley.com> (raw)
I have the same motherboard, and it works fine for me. Note the
80w cable detection. Perhaps you've got a bad cable?
-Nick
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.23
South Bridge: VIA vt82c686b
Revision: ISA 0x40 IDE 0x6
Highest DMA rate: UDMA100
BM-DMA base: 0xd800
PCI clock: 33MHz
Master Read Cycle IRDY: 0ws
Master Write Cycle IRDY: 0ws
BM IDE Status Register Read Retry: yes
Max DRDY Pulse Width: No limit
-----------------------Primary IDE-------Secondary IDE------
Read DMA FIFO flush: yes yes
End Sector FIFO flush: no no
Prefetch Buffer: yes no
Post Write Buffer: yes no
Enabled: yes yes
Simplex only: no no
Cable Type: 80w 80w
-------------------drive0----drive1----drive2----drive3-----
Transfer Mode: UDMA UDMA UDMA PIO
Address Setup: 30ns 30ns 30ns 120ns
Cmd Active: 90ns 90ns 90ns 90ns
Cmd Recovery: 30ns 30ns 30ns 30ns
Data Active: 90ns 90ns 90ns 330ns
Data Recovery: 30ns 30ns 30ns 270ns
Cycle Time: 20ns 20ns 60ns 600ns
Transfer Rate: 100.0MB/s 100.0MB/s 33.3MB/s 3.3MB/s
next reply other threads:[~2001-04-19 6:02 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-04-19 6:01 Nicholas Petreley [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-04-19 6:24 ATA 100 Nicholas Petreley
2001-04-19 14:46 David Balazic
2001-04-19 16:15 ` Vojtech Pavlik
2001-04-19 14:50 David Balazic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ADE7F45.2030205@petreley.com \
--to=nicholas@petreley.com \
--cc=ignaciomonge@navegalia.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox