From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 19 Apr 2001 02:02:18 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 19 Apr 2001 02:02:08 -0400 Received: from [64.170.109.178] ([64.170.109.178]:55253 "EHLO petreley.com") by vger.kernel.org with ESMTP id ; Thu, 19 Apr 2001 02:01:54 -0400 Message-ID: <3ADE7F45.2030205@petreley.com> Date: Wed, 18 Apr 2001 23:01:41 -0700 From: Nicholas Petreley User-Agent: Mozilla/5.0 (X11; U; Linux 2.4.3-ac9 i686; en-US; 0.8) Gecko/20010322 X-Accept-Language: en MIME-Version: 1.0 To: ignaciomonge@navegalia.com, linux-kernel@vger.kernel.org Subject: Re: ATA 100 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I have the same motherboard, and it works fine for me. Note the 80w cable detection. Perhaps you've got a bad cable? -Nick ----------VIA BusMastering IDE Configuration---------------- Driver Version: 3.23 South Bridge: VIA vt82c686b Revision: ISA 0x40 IDE 0x6 Highest DMA rate: UDMA100 BM-DMA base: 0xd800 PCI clock: 33MHz Master Read Cycle IRDY: 0ws Master Write Cycle IRDY: 0ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: yes no Post Write Buffer: yes no Enabled: yes yes Simplex only: no no Cable Type: 80w 80w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA UDMA UDMA PIO Address Setup: 30ns 30ns 30ns 120ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 90ns 90ns 330ns Data Recovery: 30ns 30ns 30ns 270ns Cycle Time: 20ns 20ns 60ns 600ns Transfer Rate: 100.0MB/s 100.0MB/s 33.3MB/s 3.3MB/s